| Line type measurement |
2 wire Single phase, 3 wire Single phase, 3 wire Three phase or 4 wire Three phase + 1 input extra channel (synchronized for channel reference during AC / DC measurements) |
| Voltage ranges |
measurement of Voltage: 600.00 Volts rms
measurement of Transient: 6.0000 kiloVolts peak |
| Current ranges |
500.00 millAmps - 5.0000 kiloAmps AC (depending on the current sensor being used) |
| Basic accuracy |
Voltage +/- 0.1 percent nominal voltage
Current +/- 0.2 percent rdg. +/- 0.1percent f.s. plus accuracy of current sensor
Active power +/- 0.2 percent rdg. +/- 0.1percent f.s. plus accuracy of current sensor |
| Measurement |
- Transient over-voltage : 2 MegaHertz samples
- Frequency cycle si Calculated as 1 cycle, 40 - 70 Hertz
- Voltage (.5) RMS 1 cycle calculation is refreshed every 1/2 cycle.
Current (.5) RMS 1/2 cycle calculations.
- Voltage swell, dips, and interruption
- Voltage waveform comparisons
- Inrush current
- Value of instantaneous flicker - IEC61000-4-15 compliance
- Frequency is calculated as 12 or 10 cycles from 40 - 70 Hertz
- 10 second frequency is calculated as whole cycle timing during specified 10 second period from 40 - 70 Hertz
- Waveform peak Voltage, waveform peak Current
- Active power, Current, Voltage, Apparent power, Reactive energy, Active energy, Reactive power, Voltage unbalance factor, Displacement power factor, Power factor, Current unbalance (zero phase, negative phase) factor
- High order harmonic component (current / voltage ) 2 to 80 kiloHertz
- Harmonic phase / Harmonic angle (current / voltage), Harmonic power from 0 to 50 th order
- Harmonic current-voltage phase angle from 1 to 50 th order
- Harmonic distortion total factor (current / voltage)
- Inter harmonic (current / voltage) from 0.5 to 49.5 Hertz
- (multiplication factor) K Factor
- ΔV10 Flicker, IEC Flicker
|
| Record |
55 weeks (w/ repeated recording settings at [1 Week] & 55 iterations)
35 days (w/ repeated recording settings at [OFF]) |
| Interface |
SDHC / SD card, RS-232C, USB2.0, LAN (HTTP server) |
| Display |
TFT 6.5" color LCD (480 × 640 dots) |
| Power supply |
Z1002 AC ADAPTER (12 Volts DC, Power supply rated at 100 to 24 Volts AC, 50 / 60 Hertz)
Z1003 Ni-MH BATTERY PACK (7.2 Volts DC 4500 mAh) |
| Dimensions (WxHxD) |
300 millimeters (11.81 inches) × 211 millimeters (8.31 inches) × 68 millimeters (2.68 inches) (excludes protrusions), Weight 2.6 kilograms (91.7 ounces) (with battery pack) |
| Accessories |
- Instruction manual
- Measurement guide
- L1000 VOLTAGE CORD set
- Spiral Tube
- Input Cable Labels
- Z1002 AC ADAPTER
- Strap
- 1 Meter long USB cable (3.28ft)
- Z1003 BATTERY PACK
- Z4001 SD MEMORY 2GB CARD
|