Characteristic |
AFG3011 |
AFG3021B
AFG3022B |
AFG3101
AFG3102 |
AFG3251
AFG3252 |
Channels |
1 |
1 / 2 |
1 / 2 |
1 / 2 |
Waveforms |
Sine, Square, Pulse, Ramp, Triangle, Sin(x)/x, Exponential Rise and Decay, Gaussian, Lorentz, Haversine, DC, Noise |
Sine Wave |
1 µHz to 10 MHz |
1 µHz to 25 MHz |
1 µHz to 100 MHz |
1 µHz to 240 MHz |
Sine wave in Burst Mode |
1 µHz to 5 MHz |
1 µHz to 12.5 MHz |
1 µHz to 50 MHz |
1 µHz to 120 MHz |
Effective maximum frequency out |
10 MHz |
25 MHz |
100 MHz |
240 MHz |
<5 MHz |
±0.15 dB |
±0.15 dB |
±0.15 dB |
±0.15 dB |
5 MHz to 10 MHz |
±0.3 dB |
— |
— |
— |
5 MHz to 20 MHz |
— |
±0.5 dB |
±0.3 dB |
±0.3 dB |
20 MHz to 25 MHz |
— |
±0.5 dB |
±0.3 dB |
±0.3 dB |
25 MHz to 100 MHz |
— |
— |
±0.5 dB |
±0.5 dB |
100 MHz to 200 MHz |
— |
— |
— |
±1.0 dB |
200 MHz to 240 MH |
— |
— |
— |
±2.0 dB |
10 Hz to 20 kHz |
< -60 dBc |
< -70 dBc |
< -60 dBc |
< -60 dBc |
20 kHz to 1 MHz |
< -55 dBc |
< -60 dBc |
< -60 dBc |
< -60 dBc |
1 MHz to 5 MHz |
< -45 dBc |
< -50 dBc |
< -50 dBc |
< -50 dBc |
5 MHz to 10 MHz |
< -45 dBc |
< -50 dBc |
< -37 dBc |
< -37 dBc |
10 MHz to 25 MHz |
— |
< -40 dBc |
< -37 dBc |
< -37 dBc |
>25 MHz |
— |
— |
< -37 dBc |
< -30 dBc |
THD |
<0.2% (10 Hz – 20 kHz, 1 Vp-p) |
10 Hz to 1 MHz |
< -60 dBc |
< -60 dBc |
< -60 dBc |
< -50 dBc |
1 MHz to 10 MHz |
< -50 dBc |
— |
— |
— |
1 MHz to 25 MHz |
— |
< -50 dBc |
< -50 dBc |
< -47 dBc |
>25 MHz |
— |
— |
< -50 dBc + 6 dBc/octave |
< -47 dBc + 6 dBc/octave |
Phase noise, typical |
< -110 dBc/Hz at 10 MHz, 10 kHz offset, 1 Vp-p |
< -110 dBc/Hz at 20 MHz, 10 kHz offset, 1 Vp-p |
Residual clock noise |
-63 dBm |
-63 dBm |
-57 dBm |
-57 dBm |
Square Wave |
1 µHz to 5 MHz |
1 µHz to 12.5 MHz |
1 µHz to 50 MHz |
1 µHz to 120 MHz |
Rise/Fall time |
≤50 ns |
≤18 ns |
≤5 ns |
≤2.5 ns |
Jitter (RMS), typical |
500 ps |
500 ps |
200 ps |
100 ps |
Ramp Wave |
1 µHz to 100 kHz |
1 µHz to 250 kHz |
1 µHz to 1 MHz |
1 µHz to 2.4 MHz |
Linearity, typical |
≤0.2% of peak output |
≤0.1% of peak output |
≤0.15% of peak output |
≤0.2% of peak output |
Symmetry |
0.0% to 100.0% |
0.0% to 100.0% |
Pulse Wave |
1 mHz to 5 MHz |
1 mHz to 12.5 MHz |
1 mHz to 50 MHz |
1 mHz to 120 MHz |
Pulse width |
80.00 ns to 999.99 s |
30.00 ns to 999.99 s |
8.00 ns to 999.99 s |
4.00 ns to 999.99 s |
Resolution |
10 ps or 5 digits |
Sine |
5 MHz |
12.5 MHz |
50 MHz |
120 MHz |
Square |
2.5 MHz |
6.25 MHz |
25 MHz |
60 MHz |
ARB |
2.5 MHz |
6.25 MHz |
25 MHz |
60 MHz |
Others |
50 kHz |
125 kHz |
500 kHz |
1.2 MHz |
Characteristic |
Description |
Carrier Waveforms |
All, except Pulse, Noise, and DC |
Source |
Internal/External |
Internal Modulating Frequency |
2 mHz to 1.000 MHz |
Number of Keys |
2 |
Characteristic |
Description |
Carrier Waveforms |
Pulse |
Source |
Internal/External |
Internal Modulating Waveform |
Sine, square, ramp, noise, ARB
(maximum waveform length 2,048) |
Internal Modulating Frequency |
2 mHz to 50.00 kHz |
Deviation |
0% to 50.0% of pulse period |
Characteristic |
Description |
Waveforms |
All, except Pulse, Noise, and DC |
Type |
Linear, logarithmic |
Sweep Time |
1 ms to 300 s |
Hold/Return Time |
0 ms to 300 s |
Max Total Sweep Time |
300 s |
Resolution |
1 ms or 4 digits |
Total Sweep Time Accuracy, typical |
≤0.4% |
Min Start/Stop Frequency |
All except ARB: 1 µHz ARB: 1 mHz |
Characteristic |
Description |
Waveforms |
All, except Noise and DC |
Type |
Triggered, gated (1 to 1,000,000 cycles or Infinite) |
Internal Trigger Rate |
1 µs to 500.0 s |
Gate and Trigger Sources |
Internal, external, remote interface |
Characteristic |
Description |
Frequency Setting Resolution |
1 µHz or 12 digits |
Phase (except DC, Noise, Pulse) |
Range |
-180° to +180° |
Resolution |
0.01° (sine), 0.1° (other waveforms) |
Internal Noise Add |
When activated, output signal amplitude is reduced to 50% |
Level |
0.0% to 50% of amplitude (Vp-p) setting |
Resolution |
1% |
Main Output |
50 Ω |
Effective Frequency Switching Speed |
2 ms using remote control (sequencing not available) |
Main Output |
50 Ω |
Internal Frequency Reference |
Stability |
All except ARB: ±1 ppm, 0 °C to 50 °C
ARB: ±1 ppm ± 1 µHz, 0 °C to 50 °C |
Aging |
±1 ppm per year |
Remote Programming |
GPIB, LAN 10BASE-T / 100BASE-TX, USB 1.1
Compatible with SCPI-1999.0 and IEEE 488-2 standards |