| SKF m20 performance |
28 kg (61.7 lb) |
| Voltage, V/Hz |
100-110V/50-60Hz |
| Bearing: Maximum weight |
40 kg (88 lb) |
| Bearing: Maximum bore diameter |
20 - 300 mm (0.8 - 11.8 in.) |
| Temperature control: Range |
0 - 250 °C (32 - 482 °F) |
| Temperature control: Magnetic probe |
Yes, K-type |
| Temperature control: Accuracy (electronics) |
± 2 °C (± 3.6 °F) |
| Time control: Range |
0 - 60 minutes |
| Time control: Accuracy |
± 0,01 sec. |
| Maximum heating temperature* |
250°C (482 °F) |
| Thermometer mode |
Yes |
| Bearing mode |
Yes |
| Power setting |
2-step; 50% or 100% |
| Demagnetisation according to SKF norms (automatic) |
Yes (<2 A/cm) |
| Can heat sealed bearings |
Yes |
| Can heat pre-greased bearings |
Yes |
| Error guiding codes |
Yes |
| Thermal overload protection |
Yes |
| Control panel |
Control panel and LED display integrated in remote control |
| Operating area |
100 W x 135 H mm (3.9 x 5.3 in.) |
| Coil diameter |
95 mm (3.7 in.) |
| Dimensions |
450 W x 195 D x 210 H mm (17.7 x 7.6 x 8.2 in.) |
| Total weight, including yokes |
20,9 kg (46.0 lb) |
| Maximum power consumption |
2,0 kVA |
| Standard yokes TIH 030-Y7 |
45 x 45 x 215 mm (1.7 x 1.7 x 8.4 in.) for heating bearings with bore diameter of 65 mm (2.6 in.) and larger. |
| Standard yokes TIH 030-Y4 |
28 x 28 x 215 mm (1.1 x 1.1 x 8.4 in.) for heating bearings with bore diameter of 40 mm (1.6 in.) and larger. |
| Standard yokes TIH 030-Y2 |
14 x 14 x 215 mm (0.5 x 0.5 x 8.4 in.) for heating bearings with bore diameter of 20 mm (0.8 in.) and larger |
| Core cross section |
45 x 45 mm (1.7 x 1.7 in.) |
| Bearing support arms |
Yes, foldable |
| Yoke storage |
Yes, internal integrated in foldable bearing support arms |
| Housing material |
Steel and glass filled polyamide |
| * Depending on bearing or work piece weight. For higher temperatures, please contact SKF. |