|
DS2072 |
DS2102 |
DS2202 |
Analog BW |
70 MHz |
100MHz |
200 MHz |
Channels |
2 |
Sample Rate (Max. ) |
2GSa/s (single-channel), 1GSa/s (dual-channel) |
Memory Depth (Max. ) |
14Mpts (Std.), 56Mpts(Opt.) |
Waveform Capture Rate |
50,000 wfms/s (Max. ) |
Vertical Scale |
500 uV/div to 10 V/div |
Realtime Waveform Recorded |
Max. 65,000 frames (Std.) |
Standard Probe |
RP3300 350MHz BW Passive Probe: 2 sets |
Complete Specifications |
Sample Mode |
Real-time sample |
Real Time |
2 GSa/s (single-channel) |
Sample Rate |
1 GSa/s (dual-channel) |
Peak Detect |
500 ps (single-channel)
1 ns (dual-channel) |
Averaging |
After both channels finish N samples at the same time, N can be 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096 or 8192. |
High Resolution |
12 bit of resolution When ≤5 µs/div @ 1 GSa/s (or =10 µ;s/div @ 500 MSa/s). |
Memory Depth |
Single-channel: Auto, 14k pts, 140k pts, 1.4M pts, 14M and 56M pts (option) are available Dual-channel: Auto, 7k pts, 70k pts, 700k pts, 7M pts and 28M pts (option) are available |
Number of Channels |
dual-channel |
Input Coupling |
DC, AC or GND |
Input Impedance |
(1MΩ±1%) || (16 pF±3 pF) |
Probe Attenuation |
0.01X-1000X 1-2-5 step |
Coefficient |
|
Max Input |
Maximum input voltage of the analog channel |
Voltage (1MΩ) |
CAT I 300 Vrms, CAT II 100 Vrms, transient overvoltage 1000 Vpk
With RP2200 10:1 probe: CAT II 300 Vrms
With RP3300 10:1 probe: CAT II 300 Vrms
With RP3500 10:1 probe: CAT II 300 Vrms
With RP5600 10:1 probe: CAT II 300 Vrms |
Time Base Scale |
5 ns/div to 1000 s/div |
2 ns/div to 1000 s/div |
Time Base Accuracy 1 |
≤ ± 25 ppm |
Clock Drift |
≤ ± 5 ppm/year |
Max Delay Range |
Pre-trigger (negative delay): ≥1 screen width
Post-trigger (positive delay): 1 s to 100,000 s |
Time Base Mode |
Y-T, X-Y, Roll, Delayed |
Number of X-Ys |
1 path |
Waveform Capture |
50,000 wfms/s (dots display) |
Rate 2 |
|
Bandwidth (-3dB) |
DC to 70 MHz |
DC to 100 MHz |
DC to 200 MHz |
Single Bandwidth |
DC to 70 MHz |
DC to 100 MHz |
DC to 200 MHz |
Vertical Resolution |
8 bit |
Vertical Scale |
500 uV/div to 10 V/div |
Offset Range |
500 uV/div to 50 mV/div: ± 2 V
51 mV/div to 200 mV/div: ± 10 V
205 mV/div to 2 V/div: ± 50 V
2.05 V/div to 10 V/div: ± 100 V |
Bandwidth Limit 1 |
20 MHz |
20 MHz |
20 MHz/100 MHz |
Low Frequency |
≤ 5 Hz (on BNC) |
Response |
|
(AC coupling, -3dB) |
|
Rise Time |
5 ns |
3.5 ns |
1.8 ns |
DC Gain Accuracy |
±2% full scale |
DC Offset Accuracy |
±0.1 div ± 2 mV ± 1% offset |
Channel to Channel |
DC to maximum bandwidth: >40 dB |
Isolation |
|
Trigger Level |
Internal ±5 div from the center of the screen |
Range |
EXT ± 4 V |
Trigger Mode |
Auto, Normal, Single |
Holdoff Range |
100 ns to 10 s |
High |
75 kHz |
Frequency |
|
Rejection 1 |
|
Low |
75 kHz |
Frequency |
|
Rejection 1 |
|
Trigger Sensitivity |
1div (below 10mV or noise rejection is enabled)
0.3div (above 10mV and noise rejection is disabled) |
Edge Trigger |
|
Edge Type |
Rising, Falling, Rising & Falling |
Pulse Trigger |
|
Pulse |
Positive Pulse Width (greater than, lower than, within specified interval) |
Condition |
Negative Pulse Width (greater than, lower than, within specified interval) |
Pulse Width Range |
2 ns to 4 s |
Runt Trigger |
|
Pulse |
None, > (greater than), < (lower than), |
Condition |
<> (within the specified interval) |
Polarity |
Positive, Negative |
Pulse Width Range |
2 ns to 4 s |
Runt Trigger |
|
Windows Type |
Rising, Falling, Rising&Falling |
Trigger Position |
Enter, Exit, Time |
Windows Time |
16 ns to 4 s |
Nth Edge Trigger |
|
Edge Type |
Rising, Falling |
Idle Time |
16 ns to 10 s |
Number of Edges |
1 to 65, 535 |
Slope Trigger |
Slope Condition |
Positive Slope (greater than, lower than, within specified interval)
Negative Slope (greater than, lower than, within specified interval) |
Time Setting |
2 ns to 4 s |
Video Trigger |
|
Signal Standard |
Support standard NTSC, PAL and SECAM broadcasting standards
Support 480P, 576P, 720P, 1080P and 1080I HDTV standards |
Pattern Trigger |
|
Pattern Setting |
H, L, X, Rising Edge, Falling Edge |
Delay Trigger |
|
Edge Type |
Rising, Falling |
Delay Type |
> (greater than), < (lower than), <> (within the specified interval), >< (outside the specified interval) |
Delay Time |
2 ns to 4 s |
TimeOut Trigger |
|
Edge Type |
Rising, Falling, Rising&Falling |
TimeOut Value |
16 ns to 4 s |
Duration Trigger |
Pattern Setting |
H, L, X |
Trigger Condition |
> (greater than), < (lower than), <> (within the specified interval) |
Duration |
2 ns to 4 s |
Setup/Hold Trigger |
Edge Type |
Rising, Falling |
Data Pattern |
H, L |
Setup Time |
2 ns to 1 s |
Hold Time |
2 ns to 1 s |
RS232/UART Trigger |
Polarity |
Negative, Positive |
Trigger Condition |
Start, Error, Check Error, Data |
Baud |
2400bps, 4800bps, 9600bps, 19200bps, 38400bps, 57600bps, 115200bps, User |
Data Bits |
5 bit, 6 bit, 7 bit, 8 bit |
I2C Trigger |
Trigger Condition |
Start, Restart, Stop, Missing Ack, Address, Data, A&D |
Address Bits |
7 bit, 10 bit |
Address Range |
0 to 127, 0 to 1023 |
Byte Length |
1 to 5 |
SPI Trigger |
Trigger Condition |
TimeOut |
Timeout Value |
100 ns to 1 s |
Data Bits |
4 bit to 32 bit |
Data Line Setting |
H, L, X |
USB Trigger |
Signal Speed |
Low Speed, Full Speed |
Trigger Condition |
SOP, EOP, RC, Suspend, ExitSuspend |
Math |
Waveform |
A+B, A-B, A°CB, A/B, FFT, Editable Advanced |
Operation |
Operation, Logic Operation |
FFT Window |
Operation, Logic Operation Rectangle, Hanning, Blackman, Hamming |
FFT Display |
Operation, Logic Operation Split, Full Screen |
FFT Vertical |
Linear Vrms, dBV rms |
Scale |
Logic Operation |
AND, OR, NOT, XOR |
Math Function |
Intg, Diff, Log, Exp, Sqrt, Sine, Cosine, Tangent |
Number of Buses for Decoding |
2 |
Decoding Type |
Parallel (standard), RS232/UART (option), I2C (option), SPI (option) |
Display |
Display Type |
8.0 inches (203 mm) TFT LCD display |
Display Resolution |
800 horizontal°CRGB°C480 vertical pixel |
Display Color |
160,000 Color (TFT) |
Persistence Time |
Min, 50 ms, 100 ms, 200 ms, 500 ms, 1 s, 2 s, 5 s, 10 s, 20 s, Infinite |
Display Type |
Dots, Vectors |
Real-time Clock |
Time and Date (user adjustable) |
I/O |
Standard Ports |
USB HOST (support USB-GPIB), USB DEVICE, LAN, Aux Output (TrigOut /PassFail) |
Printer |
PictBridge |
Compatibility |
Probe Compensation |
Output |
Output Voltage 1 |
About 3 V, peak-peak |
Frequency 1 |
1 kHz |
Power |
Power Voltage |
100-240 V, 45-440 Hz |
Power |
Maximum 50 W |
Fuse |
2 A, T degree, 250 V |
Environment |
Temperature Range |
In operation: 0 °C to +50 ° C
Out of operation: -20 °C to +70 °C |
Cooling Method |
Fan |
Humidity Range |
Under +35 °C : ≤90 % relative humidity
+35 °C to +50 °C : =60 % relative humidity |
Altitude |
In operation: under 3,000 meters |
Out of operation |
under 15,000 meters |
Mechanical |
Dimensions 3 |
Width°CHeight°CDepth =361.6 mm°C 179.6 mm°C130.8 mm |
Weight 4 |
Without package 3.9 kg °C 0.2 kg
With package 4.5 kg °C 0.5 kg |
Adjustment Interval |
The recommended calibration interval is one year. |
Regulation Standards |
Electromagnetic |
2004/108/EC |
Compatibility |
Execution standard EN 61326-1:2006 EN 61326-2-1:2006 |
Safety |
UL 61010-1:2004; CAN/CSA-C22.2 NO. 61010-1-2004;
EN 61010-1:2001; IEC 61010-1:2001 |