Recommend to a Friend
Hakko FR-301 Desoldering Tool
5.0
Excellent performance and ease of use, from this high quality, well made Hakko product.
Verified Purchase
Cliff on
Jan 12, 2023
Recommend to a Friend
Hakko FR-301
5.0
I was skeptical at first over the cost - but after receiving the unit and putting it to work it is worth every cent. The unit is very well constructed and performs exactly as expected. I am re-wiring 100 stop action magnets for a pipe organ and this tool cut my time approximately in half. I'm very pleased.
David Pratt on
Nov 25, 2022
Recommend to a Friend
HAKKO FX888D
5.0
The form factor is proper for a crowded workbench. I have not tried the iron yet but I believe that it will live up to its reputation
Verified Purchase
Bruce Zibung on
Oct 27, 2022
Recommend to a Friend
The Bomb
5.0
This desoldering tool works perfect. I desoldered a 28pin chip and it fell out of the board.
Richard Fort on
Oct 18, 2022
Recommend to a Friend
It is a good investment
5.0
I have only had the Hakko FX-888D soldering station for a few weeks but I concur with the other reviews: the unit heats up very quickly, the temperature recovery time is short, it appears to be well built, the iron is nice and light and comfortable and is easy to maneuver, and my soldering experience has been great so far. I definitely should have purchased this soldering station a lot sooner. One thing about the preset temperatures, before you can access them you need to change the temperature setting mode selection to preset mode (1) and verify that the number of presets is set to 5P in the parameter settings (see the Setting mode selection section of the manual).
Anonymous on
Jul 19, 2022
Recommend to a Friend
Top (Desoldering) Gun
5.0
Fast heating. Excellent portability. A breeze to clean. I like not having to be tethered to a separate unit. The quick change shaft is a bonus. I will buy one for my home shop.
Anonymous on
Jun 28, 2022
Recommend to a Friend
Great hobbyist scope for the money
4.0
The Rigol DS1054Z is simply an excellent scope for the hobbyist on a hobbyist budget.
I've put this scope to good use so far, analyzing I2C, SPI, and a switch bounce issue on an old tube guitar amp.
Yes, this scope is a bit older now and there are a couple of hot competitors out there (GW Instek GDS1054B and Siglent SDS1104X-U). To compete with these, the Rigol now comes with the higher end features, like 100MHz bandwidth, enabled, so it still holds its own and I am very happy with my purchase.
I've read some complaints about the relay clicking noise and fan noise. All of these scopes have fan noise. You're going to hear it, but if you're used to working in an electrical lab environment, it's nothing out of the ordinary. If you're sitting at home in a quiet room with nothing else going on then, yes, it's the loudest thing in the room.
My own particular gripes about the unit are (1) there's no real web interface to speak of, and the remote operation software is not user friendly and slow, and (2) the response to the controls is just a bit laggy but not terribly so. Given the age of this design compared to the newer competitors I'm not surprised. But due to these, I give it a 4 rather than 5 rating. I'm secretly hoping they'll improve the remote access with a software update, but not holding my breath, and it isn't a key feature for me.
Still... great quality scope!
Mark Bratcher on
Jun 08, 2022
Recommend to a Friend
Awesome
5.0
Been using and reccommending Hakko soldering stations for years. The FX888D is compact, rugged, reliable and works great.
Paul T. on
May 30, 2022
Recommend to a Friend
Great tool
5.0
Easy to use, has everything you need except solder. Tips are great too. Small footprint on work bench, stable, does everything you need it to. With my arrangement, the wires are not in the way and it has made my workflow a lot easier.
on
May 03, 2022
Recommend to a Friend
It's a must have if you work on electronics!
5.0
Very impressed, The screen size works fine for my needs, and learning the menus has been easy.
Verified Purchase
James Cameron on
Mar 17, 2022
Recommend to a Friend
Awesome
5.0
If you have read any good reviews on this gem......believe them. This is one product that exceeds expectations. I was amazed how well this thing removed everything I tried it on. If you are in the market for a desoldering tool this thing is truly a gem!!
David Kelly on
Mar 15, 2022
Recommend to a Friend
Great Tool
5.0
This tool provides an excellent bundle of equipment for the price. It is a great basic oscilloscope form hobbiest use.
Verified Purchase
Anonymous on
Nov 25, 2021
Recommend to a Friend
Great purchase
5.0
It is so much fun to have a professional soldering iron system. VERY highly recommended. Just dial in the temperature, use the convenient holder with cleaning add ons, use whatever tips you want--and you are good to go.
Anonymous on
Nov 20, 2021
Recommend to a Friend
Another great Hakko product
5.0
I bought this to give my old Hakko 936 a break, I have used it hard for quite a while and decided it was time to go with the smaller , digital version and this didnt let me down.
Got a great price and free shipping could not be happier with my purchase.
Verified Purchase
Tim on
Nov 06, 2021
I got a lemon
1.0
Unit died 3 months later, after extremely light use and proper maintenance.
I would have to send it from CR to US for fixing. No further help provided
Had to replace the main PCB not available in HakkoUSA and just to be sure a new heating element from a 3rd party.
The good thing is you can find parts, (hakko USA item is backordered.)
The bad thing is that I got a lemon and that I had to pay for it… I will stay away from hakko products for sure from now on.
is backordered.)
The bad thing is that I got a lemon and that I had to pay for it… I will stay away from hakko products for sure
Verified Purchase
Anonymous on
Oct 19, 2021
Recommend to a Friend
hakko fx 888d-23y
5.0
purchased iron and 4 extra tips. am loving it. better than the other 2 i have. ty
Anonymous on
Oct 19, 2021
Recommend to a Friend
awesome unit
5.0
this unit works great, does the Job !!
Verified Purchase
Kevin Habhegger on
Sep 28, 2021
Recommend to a Friend
Can’t go wrong with this choice
5.0
I debated extensively between this Rigol DP832 and the Siglent SPD3303X. Both are excellent values for hobbyists. Ultimately, I chose to buy the DP832 because the quality is a touch above the Siglent snd because I’ve been extremely impressed with other Rigol items I’ve purchased in the past. This power supply is extremely well built, easy to use and exactly what my workbench has been missing.
Verified Purchase
Pat on
Sep 23, 2021
Recommend to a Friend
No more solder wicks... A must have desoldering tool
5.0
A great tool for the serious electronics service technician. It saves lots of time by making a fast and clean desoldering of through-hole components off of PC boards.
Anonymous on
Sep 21, 2021
Recommend to a Friend
Everything I expected +
5.0
This scope lives up to all the glowing reviews. It is definitely a good value. I’ve used analog oscilloscopes for decades but this is my first DSO. The user manual could use some work but the YouTube videos fill in most of the gaps.
Verified Purchase
Gene on
Sep 09, 2021
Recommend to a Friend
Excelent tool.
5.0
I work on vintage audio gear, this remove solder quickly, with out damaging pads.
I love it
Verified Purchase
Anonymous on
Aug 02, 2021
Recommend to a Friend
Believe the hype!
5.0
This gun is outstanding! Follow the instructions on usage and it works lie a charm. Huge time saver. Thanks TEquipment for having it at a great price!
Verified Purchase
John W Sweeney on
Jul 25, 2021
Recommend to a Friend
RIgol rig
5.0
This rig is one of the best for the cost.
Verified Purchase
Wade W Schulz on
Jun 28, 2021
Recommend to a Friend
Outstanding product
5.0
The FR-301 is the best desoldering gun in this class. The suction pressure could not be compares with those clone products, strong pressure almost could not miss every shot. Even the gun kit and tips' prices more expensive but the outcome could not be compare or PCB damaged.
Eric Wong on
Jun 27, 2021
Recommend to a Friend
A Great Soldering Iron
5.0
I replaced a Weller WTCPS with the Hakko FX888D after using the Hakko at the WMU plasma lab to do some repairs on equipment. It is better at maintaining tip temperature than the Weller, which makes it easier to get work done properly.
Verified Purchase
Jim Cotton on
Jun 08, 2021
Recommend to a Friend
Outstanding!
5.0
Awesome tool, works beyond expectations.
Quick, good vacuum, and easy to clean.
TEquipment is my first choice for all equipment needs.
Verified Purchase
Douglas Sherwood on
May 24, 2021
Recommend to a Friend
Good
4.0
The build quality seems to be good. The user interface is also good. I really don’t know what I’m doing with this thing. But this scope does help you learn. I could learn even faster if I had a fancy white board.
Verified Purchase
david washburn on
May 18, 2021
Recommend to a Friend
Well balanced
5.0
It has been said multiple times and I reinforce so, this scope is great for its price.
Anonymous on
May 13, 2021
Recommend to a Friend
Hakko FX888D
5.0
Great product...Hakko is #1 best soldering iron. I have purchased many Hakko products from you and have been happy with product and delivery times!
Verified Purchase
Valerie Fish on
Apr 28, 2021
Recommend to a Friend
Great Linear Supply!
5.0
This is an outstanding piece of hardware as it is. I recommend spending a bit of time on the blogs to truly appreciate the feature set. I recommend tying the 0VDC commons together on output 2 & 3 as the isolation isn't ideal without it. I would buy this one again in a second. Intuitive and very robust.
Verified Purchase
Elliot from Colorado on
Apr 22, 2021
Recommend to a Friend
Great product
5.0
Great product, great store and sellers perfect combination. Thanks TEquipment!!
Aaron Cantu on
Apr 22, 2021
Recommend to a Friend
Finally got my own!
5.0
I have used this station for many years at my workplace and now I finally got my own. It's simple and quick to use once you get the hang of it, works well for all kinds of jobs - tiny 0201 SMD to big power electronics parts!
Also, I was happy to know that it now comes included with a chisel tip by default!
Verified Purchase
Sri on
Apr 05, 2021
Recommend to a Friend
Works excellent
5.0
trying to desolder mechanical keyboard switches without one is so time consuming and dangerous if you are not skilled. This tool pays for itself after a few uses
Only way to fly on
Apr 01, 2021
Recommend to a Friend
Works Great
5.0
Very Nice
on
Mar 31, 2021
Recommend to a Friend
Great little station
5.0
I love these cheap stations. We have expensive soldering equipment but we seem to grab for these more often then we'd like to admit. Just works the way a station should.
Verified Purchase
Robert Dee on
Mar 20, 2021
Recommend to a Friend
Way way better than alternatives
5.0
Having used the copper desolder approach and suction approach, this thing is so so much faster, easier and better to use. I do say get a few different sized tips to cover your bases on what you would desolder.. but it really works well. Most of the time.. one suck per solder joint, and the component comes off.
Anonymous on
Mar 18, 2021
Recommend to a Friend
Best Thing Since Shirt Pockets
5.0
I use this on old point to point radios so it does need cleaning more frequently than SMT components but that's ok. It works and works well.
I missed this thing all my life and didn't know it. I love it.
Anonymous on
Mar 12, 2021
Recommend to a Friend
Hakko soldering station
4.0
Works as advertised. Plenty of accurately controlled heat when needed and the presets and programming are very convenient --BUT-- for some unknown reason, the user guide distributed in the US does not fully explain how to set up and program the unit. You must go to the web site and download the other user guide.
Also a bit disappointed that the tip did not last as long as I would have expected.
Anonymous on
Feb 27, 2021
Recommend to a Friend
even a beginner can do well with this
5.0
as long as they understand the theory behind soldering. High heat and stronger power supply make good soldering much easier and faster.
Verified Purchase
Anonymous on
Feb 23, 2021
Recommend to a Friend
Great First Oscope
5.0
Plenty of extra channels to use if you blow one up. Lots of documentation, good price
Verified Purchase
Ryan Clark on
Feb 21, 2021
Recommend to a Friend
Amazing Starter Station
5.0
Great solder station for the price. Easy to use and program. Other tips are easy to find. Make sure you are using good solder.
Verified Purchase
Ryan Clark on
Feb 21, 2021
Recommend to a Friend
Excellent product and service
5.0
Top notch customer service. You actually get to talk to a real person here in the states who actually sounds like they like their job and cares about keeping you as a customer. Due to me being a new customer, I had some questions and they were very helpful!! Fast shipping and product was packaged well. The iron is fantastic. I have been using an old weller for years and procrastinating upgrading. But holding components in place with my third hand waiting for the iron to warm up finally got old and I ordered this one. For the life of me, I can't figure out why I didn't get this earlier!! Trust me, get this iron, you will not regret it! Heats within 20 or 30 seconds to 650 f. Stand is stable, iron chord is just right length, tip stay hot on demand. Will be ordering future needs through Test Equipment!!
Verified Purchase
Dave F on
Feb 17, 2021
Recommend to a Friend
Hakko FR-301 Desoldering Tool
5.0
It is possible to remove solder with a manual de-soldering pump and solder wick, but there is nothing like the speed and ease of the Hakko FR-301 Desoldering Tool. The only downside is the cost. After looking at some cheaper knock-offs of the Hakko product, I decided the money was well-spent on the Hakko. Once you use this tool, you'll never go back to a manual pump.
on
Feb 15, 2021
Recommend to a Friend
A fun tool to use!
5.0
This solder sucker makes removing a component fun and quick. Easy to use, component safe, gets all the solder even on double-sided PCB's!
on
Feb 12, 2021
Recommend to a Friend
Awesome - should have bought it years ago
5.0
I hated having to desolder something with a solder sucker (I think I was the sucker...) and/or desoldering braid. Using this thing is so easy. Heat it up, put it over the pin and when the solder melts pull the trigger. My Scottish heritage made me have doubts about the value for dollar. Boy was it wrong. This thing is worth every penny. I spent more than 30 minutes removing one of 3 pots on aboard with a "good" solder sucker and braid. So I gave up and put that board aside. I then ordered this and to try it out for giggles more than anything, I took this desoldering gun to the other two. I was done in a couple minutes - cleaner, faster, no damage and without headache.
Verified Purchase
Robert Porter on
Feb 10, 2021
Recommend to a Friend
Great Scope
5.0
Well packaged; received quickly. Still learning how to use it, but many resources are available online.
Tim White on
Jan 29, 2021
Recommend to a Friend
Handy Dandy
4.0
Great for removing solder and extracting components safely.
Verified Purchase
Anonymous on
Jan 27, 2021
Recommend to a Friend
great soldering iron
5.0
I've purchased several things from TEquipment. Great products and fast shipping. I recommend.
Anonymous on
Jan 23, 2021
Recommend to a Friend
Great service from TE Equipment
5.0
Overall one of the easiest and most painless purchases I have made. I bought this oscilloscope for my daughter and she is very happy with it. Great customer service and fast (!) shipping!
Anonymous on
Jan 23, 2021
Recommend to a Friend
Excellent First Choice for RC Electric Soldering
5.0
Since involving myself in Radio Control electric planes, all my soldering jobs were done by my Local Hobby Shop. They stopped doing that and I was left without a solution. My requirements involved components with a wire size from 10-14AWG for large batteries and barrel connectors that range from 3.0-4.0mm diameters of gold-plated material. Too expensive to screw up! Especially when some plugs are encased in a silicone housing. Apply excessive heat and they will melt to the point where they become distorted and not safe to use. The LHS uses the Hakko 951 which they use on a near daily basis. A step down from that is the FX888D-23BY. After 2 months of usage, it has turned out to be a great choice. It is easy to use and amazingly effective. It makes my soldering jobs look like I am a pro. No more wasted connectors, and no more frustration. I am totally satisfied with TEquipment's price for this great little machine which is a complete soldering station for my needs. It didn't take me long to figure out how to get it going. Of course, a few YT videos, the right solder wire, and flux made my success easier to arrive at. I recommend this station to any one with similar needs as mine.
Alamo Stetson on
Jan 23, 2021
Recommend to a Friend
My son loves it!
5.0
My son mentioned that he would like an oscilloscope (I didn't even know what that was), so Christmas was the perfect time to get him one. He loves it and says he would highly recommend it to anyone in the electrical engineering field.
Samantha Carman on
Jan 21, 2021
Recommend to a Friend
Review on Rigol DS1054Z
5.0
Nice oscilloscope, I easy to work with.
Perfect oscilloscope, I am very happy to work with. on
Jan 15, 2021
Recommend to a Friend
Such a good buy!
5.0
Great features for a great price. The measurement soft keys on the left are really handy. My only complaint is the refresh time while changing the horizontal and vertical. It is slower than other digital scopes to update as you are making those adjustments. All is well though once you arrive at your desired level, so it's a minor concern. I'm using this for DIY audio based projects and it has been a great choice for that kind of tinkering.
Verified Purchase
Tim D on
Jan 13, 2021
Recommend to a Friend
Good tool
5.0
Just used my new Hako FR-301 today , I am working on vacuum tube equipment, the Hako works very well removing large amount of solder on tube socket tabs. Haven't had time to try it on PCB yet but I'm sure it will work well there also.
Verified Purchase
Davide on
Jan 07, 2021
Recommend to a Friend
Very Nice Scope
5.0
This is a great scope! Very user friendly, which is important when trying to teach students that have never used an O-Scope before. The display is easy to read and full of information, and there are a lot of extra built in functions for special applications.
Tim on
Jan 05, 2021
Recommend to a Friend
A solid scope at a great price
5.0
I've bought two of these for myself and for my student team, and they've both performed admirably. You won't find a better entry-level scope for the price, especially with 4 channels and probes.
Anonymous on
Dec 25, 2020
Recommend to a Friend
Hakko FX888D-23BY
5.0
Great iron!
I been using an 20 dollar unit.
This kicks a$$.
Verified Purchase
Jose Desousaj. dEsOUSA on
Dec 20, 2020
Recommend to a Friend
Great value
5.0
We have 2 laboratory environments and have purchased this unit, the DP832, and also the DP832A. Both are nice, reliable units for the money. The DP832A has been in service now for about 2 years. The DP832 we just bought for our 2nd lab. My only complaint is that the display is pretty small, but at my age, all of them are small :-) The round keypad took some getting used to, but overall they have been a good purchase.
Anonymous on
Dec 07, 2020
Recommend to a Friend
Hakko FX888D
5.0
Nice, beats my 25 dollar unit of 15 years.
Verified Purchase
J DeSousa on
Dec 02, 2020
Recommend to a Friend
Quality Product
5.0
Quality product but you should check out soldering stations on YouTube. This technology is quite old and for the price, it's quite a lot. The soldering station takes around 25 sec or so to reach the default 700 Degrees F. It can seem like a long wait if you need to turn it off for a bit and turn it back on. As most reviewers mentioned, the interface is not intuitive at all. But regardless, I'm still pleased with the product.
Verified Purchase
Timothy Chan on
Dec 02, 2020
Recommend to a Friend
Hakko FX888D
5.0
As always when dealing with tequipment the item showed up before the deadline. Well packaged. The Hakko is a great little soldering station. My only regret is I didn't order one years ago, looking back at all the cheap crap I've 'made work' seems like it cost me more than what would have if I just ordered the right tool for the job. Lesson learned.
Will Masters on
Nov 30, 2020
Recommend to a Friend
Nice soldering station
5.0
Works great! Worth every penny.
Verified Purchase
DW on
Nov 27, 2020
Recommend to a Friend
Halko FR-301
5.0
I’m really pleased with this desoldering tool. Desolders perfectly so the component can be removed easily. So much better than my vacuum sucker - no comparison.
on
Nov 27, 2020
Recommend to a Friend
Hakko FR-301 Desolder Tool
5.0
Best tool for desoldering you will find. Heats up fast and desolders fast and clean. Highly Recommended.
Hakko FR-301 on
Nov 23, 2020
Recommend to a Friend
Great tool at a reasonable price
5.0
I am retired electronics design engineer and my hobbies include ham radio which involved, in some cases, building and repairing new fangled electronics (i.e. SMD and thru hole digital and analog pc bds). It became quite apparent that my old tools (e.g. soldering iron, solder sucker) were just not up to the task. So I indulged in the purchase of the Hakko FR-301 desoldering tool. Expensive for a hobbyist? Yes but worth every cent.
Anonymous on
Nov 16, 2020
Recommend to a Friend
Very nice lab supply for the serious hobbyins
5.0
Pros of this power supply:
- Clear and easy to read display
- The three outputs are very convenient for my typical use of bipolar rails for opamps/etc and a 5v or 3.3v rail for microcontrollers.
- The combination of rotary encoder and circular number pad makes editing parameters pretty easy.
Cons:
- Channel 2 and 3 share a common terminal, not a huge deal.
- I would prefer a number pad with a square layout, but it doesn't take long to get used to.
- The fan is a little noisy, but this is to be expected.
Overall:
I like it, other top contenders were a GW-Instek unit with potentiometers instead of encoders/number pad, and a Siglent unit. The Rigol was a little more expensive than either of these, but I'm happy with this choice.
Verified Purchase
Anonymous on
Nov 11, 2020
Recommend to a Friend
Very capable scope
5.0
This scope is very capable, and moreso because it comes loaded with measurement tools thanks to the unlocked extra software straight from TEquipment. Quality build throughout. I'm older so I normally use reading glasses, and they do help with this instrument to read some of the smaller text (some of the on-screen text can be enlarged via settings). Some reviews speak to the fan being noticeable, but really, I did not think it was noisy at all - just a light rushing fan sound like you'd expect. Being lazy, I uses Auto a lot, which is a nice feature. Although feature packed, it will still make a good scope for the beginner to learn on - everything is there. For me, I am learning a lot in the world of digital scopes since I come from using older analog scopes. For new users, I recommend the Quick Start it's a great way to walk-through the buttons and commonly used features features.
Verified Purchase
Mike Mayer on
Nov 10, 2020
Recommend to a Friend
Hakko FR-301 makes desoledring easy
5.0
I repair vintage computers and hardware that have a lot of through-hole components. This has made it a dream. Projects that took hours using solder wick now take minutes. Well worth the investment. Got mine at a great price at TEquipment. Cheaper than Amazon.
Douglas Finn on
Nov 05, 2020
Recommend to a Friend
Excellent tool
5.0
Several years ago I bought a Hakko 808 desoldering gun and was reasonably happy with it. For a couple years now it's been getting less effective so I thought I'd try the 301. Huge difference! The 301 works almost instantaneously and if this one breaks, is stolen, or is otherwise gone from my bench, I'm buying a new one immediately. What a great tool.
Thomas Gruning on
Nov 05, 2020
Recommend to a Friend
Awesome
5.0
This Scope is worth every dollar and has even more features anyone can ask for especially at this price range. The build quality is amazing and the material is solid. It also comes with a huge screen which is already a luxury feature more expensive scopes tend to have.
Verified Purchase
Damion Chau on
Oct 16, 2020
Recommend to a Friend
more than just an entry level scope.
5.0
Good software package . 4 channels so working on stereo amps is easier able to see input output of both channels at the same time . FFT work for audio .
Triodethom on
Oct 14, 2020
Recommend to a Friend
Hakko FR-301
5.0
I think I was wasting all my time using a lot of different desoldering tools. At the moment I start to work with this great too I become the happiest man with an electronics hobby! Hakko does an excellent job. Just a pleasure to use this desoldering gun equipped with great powerful pump!! Highly recommend it!!
Verified Purchase
ivo kunchev on
Oct 12, 2020
Recommend to a Friend
Excellent workbench power supply
5.0
I ordered this power supply to replace a old Tektronix PS280. I get addicted to the dial number. It is easy to get precision. The fan is not as noisy as early releases.
I would recommend it.
Excellent on
Oct 05, 2020
Recommend to a Friend
Compared to a 4 channel Instek
4.0
Getting my new Rigol with options bundled included I was eager to see the options. With the usual new equipment jitters, I was pleased to see they were all installed and I didn't have to do any downloading, etc.
I wanted to see how the Rigol stacked up. From a Youtube review I knew the blue and green traces were similar. They are. The green I would say is teal but practically, light blue. However the 2 "blues" are distinguishable so not a problem. The pink I call purple.
Also from a review it was known the font sizes of letters are small. They are. Some are quite small such as measurement data. It may be a problem. Not so good,
I like the looks seeing an actual unit rather than pictures. From pictures I had thought it had a poor style to the design.
Sharing a common control for vertical didn't pose much of a problem. Though at times switching trigger and back to which vertical channel I wanted did seem to be a lot of fiddling.
A few cons. The select switch slips a lot making for a wrong selection. I talked to a guy at Rigol and he says he gets that a lot. He says muscle memory comes into play. I suppose. Also it's a hard press. Mechanically I wonder how long that switch will hold up.
In acquisition the manual led me to believe I had a choice other than sin(x)/x. Apparently not, talking to Rigol. But the manual is for the 1000 series. Maybe so on other scopes.
The screen appears smaller with the left menu.
For holdoff ranging my Instek is better. I'm spoiled. The holdout is good though.
For pros I like having hi res. I can see differences using it. While maybe old hat nowadays I think it's a great feature to have.
Also Pattern triggering is potentially very useful. There are several other triggers I didn't have.
Also in Math the option of being able to perform logical operations is exciting.
In general usage the triggering is fine as is using different memory depths.
While writing a review not a comparison, I say my Instek is the better performer for ease of use and functionality and the Rigol has more versatility. Right now, being a new scope for me, the Rigol is my main interest.
on
Oct 04, 2020
Recommend to a Friend
Better than Expected Vacuum
5.0
Good vacuum for self contained unit. Nice case as well.
Anonymous on
Oct 03, 2020
Recommend to a Friend
Hakko FR-301
5.0
Great tool. Works fantastic. Wish I would have gotten one years ago.
John M Philip on
Sep 30, 2020
Recommend to a Friend
Fantastic scope for the price
5.0
They pack a lot of nice features into a fantastic price point. Good choice for an entry level scope!
Bradford M on
Sep 28, 2020
Recommend to a Friend
Great Tool
5.0
The reviews were good on this desoldering tool so I expected it to work, but it surpassed my expectations. It makes desoldering fun instead of frustrating. It works just like you would expect. The tip works like a soldering iron with a hole in the middle - you hold it on the pin you want to desolder until the solder melts, then pull the trigger and it sucks all the solder off instantly. This tool is a real keeper. I considered buying one of the cheap ones from another vendor, but after using the Hakko, I'm glad I paid for a real professional tool. It pays to spend a little more when something really works like it should. I highly recommend it. I bought the kit with all the tips and the stand and I'm glad I got everything so I'll have what I need.
FRED TRAVERS on
Sep 21, 2020
Recommend to a Friend
Good tool, reasonable shipping cost
5.0
Good tool, fast shipment, correct voltage for US/Canada.
Art on
Sep 18, 2020
Recommend to a Friend
Amazing Tool!
5.0
Very well build & easy to maintain.
I give it 5 STARS well deserved :)
Verified Purchase
Downhillsyl on
Sep 14, 2020
Recommend to a Friend
Well worth the investment
4.0
I bought this tool to desolder some components from multi-layer PCBs where I was finding my other spring-solder suckers were not working well..
This tool is really good for that. Its almost makes it fun to do desoldering. It safely removed my micro-switches and other components from my multi-level PCBs with NO Damage. And it was fairly quick to remote these components — those I did get the occasional lead that required me to reflow solder into the eyelet, and then desolder again. But even so — it did a super job doing this.
It has four heat settings. I had to used setting 4 for the multi-layer PCBs. I also removed quite a number of burned out LEDs from a single layer PCB. Setting 1 was adequate for this. This was where it was really “fun” to desolder, as it only took about two seconds per leaded to de-solder, and quite literally the LEDs DROPPED from the PCB after I desolder red them, and the resulting PCB pads remained in MINT condition. I was really impressed.
I didn’t find the unit got too hot too hold, and it was lightweight, and comfortable to hold.
The only thing I would suggest to people considering buying this, is to make sure you buy one of Hakko’s drill cleaning bits when you get this unit. The poker that comes with it will not always clean the desoldering tube and it might become totally clogged. However if you have the cleaning drill, it is relatively easy to clear up solder that might be blocking the tube.
Over all, I would highly rate this.. I wish I had purchased this years ago. It would have made it so much easier for me!
Hakko FR-301 is a great tool for desoldering! on
Aug 31, 2020
Recommend to a Friend
Hakko FR301 Kit 2
5.0
Purchased from TEquipment, and shipped for free: 'FR301 Kit 2' which includes the Hakko de-soldering gun, 4 de-solder tips of various sizes, 633-01 Iron stand and a few cleaning tools. Several years ago, I purchased the Hakko FX-951 Soldering station that I am extremely happy with. Based on the quality of FX-951, I felt their de-soldering gun, FR301, would be the obvious choice. Hakko FR301 has exceeded my expectations for a self-contained de-soldering tool - hands down beats manual bulb and plunger style solder suckers.
Verified Purchase
Paul on
Aug 26, 2020
Recommend to a Friend
Nice Upgrade
5.0
This soldering iron was a huge upgrade from the cheap one I bought at Walmart. It keeps heat and distributes it evenly. Very nice for smaller components that need precise heat. Would definitely recommend. Worth the price.
Verified Purchase
Ryan on
Aug 25, 2020
Recommend to a Friend
The right tool for the job
5.0
If you have ever had to de-solder anything, you know how much fun it can be with sub-standard tools. This tool makes the job almost like magic! It works really well, just make sure you have a few tip sizes to choose from.
Anonymous on
Aug 24, 2020
Recommend to a Friend
Met my needs, exceeded my expectations
5.0
I can't believe I waited so long to get this power supply. This power supply had all of the features I was looking for and the build quality exceeded my expectations. As a hobbyist, I could have gotten a cheaper power supply but I'm glad I didn't.
Verified Purchase
Dave on
Aug 21, 2020
Quality is not as good as it was
3.0
This is my second DS1054Z first one was good
But unfortunately, this is a common practice among Chinese company as soon as they earn your trust they will cut from every possible corner to increase their benefit margins
quality of probs on this one was horrible in another word if you buying this consider to buy 4 probs
the device itself is very laggy and slow and inaccurate
but it is cheap very cheap
if you can spend a little more buy American models like Keysight
unfortunately, this was not possible for me since organisation budget was limited
Verified Purchase
Farshad on
Aug 18, 2020
Recommend to a Friend
it's The One
5.0
It's never let me down
Sam Rad on
Aug 13, 2020
Recommend to a Friend
Get it! its worth every penny and will save you from so much frustration!
5.0
ive been using the classic 20 dollar bulb suction de soldering iron for years. that thing was a hit and miss i would often damage traces trying to get chips off with it. after breaking a few game consoles over the years i finally took that piece of crap and tossed it and broke down to get this.
this desoldering gun is night and day difference i cant recommend it enough!!! don't waste your time with the cheap alternatives! this just work 100% of the time its also much faster than the cheap methods. the time it takes me to remove a chip is cut in half and it comes off with out breaking traces and no flux required either! clean up is a breeze too!
Just get it! You wont be disappointed!
Verified Purchase
Dave on
Aug 05, 2020
Recommend to a Friend
Terrific Scope
4.0
Feature packed oscilloscope. Great value. I love this product
Verified Purchase
Rick K on
Jul 24, 2020
Recommend to a Friend
Great balance between price, quality and features
5.0
Got my DP832 coupe of weeks ago and it did not disappoint. It is so convenient to have 3 channels. Great precision. Easy to program it. Provided Windows software is very convenient. Connecting it to LabView opens a whole new world of possibilities.
Verified Purchase
Gaston on
Jul 22, 2020
Recommend to a Friend
Worth the Extra $
5.0
Great tool. Well built with convenient features like an on/off button on the handle, and a temperature dial. Makes the less expensive brand/model I bought (that's being repaired) look amateurish. TE shipped it quick and had a good price.
Verified Purchase
Juan Calvillo on
Jul 20, 2020
Recommend to a Friend
I can’t recommend this enough
5.0
I was tired of using a soldering sucker and soldering wick, so I started looking at desoldering guns. I wasn’t sure if I wanted to go with Hakko or the cheap China knock off, but I am glad I went with the Hakko. This is a quick desoldering gun that will make your life so much easier,
Verified Purchase
Kirk on
Jul 16, 2020
Recommend to a Friend
Best soldering gun
5.0
I have been soldering for years mostly using cheap soldering irons but having to replace them often. This gun is extremely reliable and heats up really fast.
Verified Purchase
Kirk on
Jul 16, 2020
Recommend to a Friend
Works well
5.0
It works well and I like its compact size. I have an old Pace solder sucker and vacuum pump that works well but is just too big and bulky. It takes up way too much room on my bench. This is so much nicer.
on
Jul 12, 2020
Recommend to a Friend
Fantastic tool
5.0
I realized I was using a sucker pump for almost 30 years, so It got to be better tool for it. Here it is. This desoldering tool is so easy to use, works very well, easy to clean. I do the 3 hours job in 15 minutes with it, and without overheating the components. A real game changer for me.
Verified Purchase
Brice on
Jul 07, 2020
Recommend to a Friend
Great Soldering Station
5.0
I picked this soldering station up recently and I am very pleased with my purchase. The unit is built very well and is reasonably priced. It’s a pleasure to use. Highly recommended!
Verified Purchase
Ron Franks on
Jul 07, 2020
Recommend to a Friend
Great Value
5.0
I agonized over which oscilloscope to purchase for weeks. I finally decided on this one and couldn’t be happier. It’s a great value and I have no regrets at all. Recommended to all who are in the market for an entry level scope.
Verified Purchase
Ron Franks on
Jul 07, 2020
Recommend to a Friend
Lots of features packed in for a good price
5.0
I thought I would be spending at least $600 on a decent oscilloscope. especially with four channels. This lower cost equipment works fantastic and first time I powered it up to test it , I found it intuitive to use and easy to access the features. I would suggest this unit to anyone who needs to troubleshoot their electronic projects.
Verified Purchase
Charles Tuttle on
Jul 06, 2020
Hakko FX888D works great, but terrible controls.
2.0
This iron can definitely put out and maintain some heat, build quality feels excellent, but unless you solder at a fixed temperature, changing the temperature will be quite frustrating. Only after calling Hakko support have I got it working properly, they are very helpful and quite familiar with this product and how to correct the settings (I wonder why). Despite how well the iron works, having to memorize or look up how to use a SOLDERING IRON is insane. I would have never guessed it possible to over engineer a soldering iron.
Verified Purchase
Francis on
Jul 05, 2020
Recommend to a Friend
Hakko FR-301
5.0
I've used a Hakko soldering station for years so I know and trust the brand but I always used a solder sucker for de-soldering. A tool like the Hakko FR-301 just seemed like an extravagance but I finally decided to spring for one. It's so much faster, cleaner and easier on your circuit board I'm really sorry I waited so long. There are Chinese knock-offs of this but they just don't work well, get the real thing.
on
Jul 05, 2020
Recommend to a Friend
Much Better Desoldering Tool
5.0
The Hakko FR-301 is much better desoldering tool than using the old manual method especially if you are working with multiple projects in a day. Very clean results, easy to use and maintain. I ordered 2 other tips for thicker wires and heavier solder removal. No issues so far after a month of usage. Highly recommended.
Verified Purchase
Allan on
Jun 27, 2020
Recommend to a Friend
Can't beat it for the price
5.0
While this scope has a few minor flaws, it's really an excellent value for the price - especially now that it comes with all features (except 100mhz) unlocked from the factory. Yes the UI is kind of laggy, and the interface can feel cluttered and a bit unintuitive. But I just can't knock an oscilliscope that has four channels and all of these features (especially I2C and SPI decoding) at a price that's accessible to hobbyists.
Verified Purchase
Anonymous on
Jun 26, 2020
Recommend to a Friend
The best I've used
5.0
Much better than previous desoldering stations I've owned, and is by far the least expensive. Very powerful, nice complete removal. Extremely easy to clean.
on
Jun 22, 2020
Recommend to a Friend
Hakko FR-301
5.0
This device was recommended to me by another tech. I have had other auto desoldering tools but this one is far superior. Works like a charm, doesn't clog and keeps the work moving. Highly recommended.
Verified Purchase
Daniel A Lurie on
Jun 17, 2020
Recommend to a Friend
Hakko FR-301 pays for itself
5.0
This is my 2nd Hakko FR-301. My first was from Japan, but I recommend sticking with a US version, if you're in the States. It's also important to use the correct nozzle for the job, ensure it stays clear of solder clogs, and is generally used properly.
Verified Purchase
Erich Moraga on
Jun 11, 2020
Recommend to a Friend
Good Oscilloscope for the cost.
4.0
The Rigol DS1054Z is a very good choice for an entry-level oscilloscope. It is packed with features and having 4 channels is a definite bonus although having a single, shared set of vertical scale and offset controls takes some getting used to.
Two disappointments are imprecise voltage measurements and not being able to turn off the display of inputs used in math operations.
Rigol DS1054Z Performs Well on
Jun 11, 2020
Recommend to a Friend
The Standard for Our Repair Shop
5.0
This equipment gets used daily and I have just recently purchased an additional 2 for our shop based on the reliability and performance of one purchased several years ago.
Verified Purchase
Katy on
Jun 10, 2020
Recommend to a Friend
Excellent scope for any hobbist
5.0
Four channels, bright screen, single step triggers, external storage for capturing traces for the money this scope simply cannot be beat.
Joe OConnor on
Jun 09, 2020
Recommend to a Friend
GREAT VALUE! Awesome scope!
5.0
I was set to buy a used Tek portable Digital scope. then I saw the Youtube videos about this Rigol DS1054Z and I made the decision to purchase it. I am so happy with it I started a Rigol DS1054Z users group on facebook! What an Awesome bargain!
Anonymous on
Jun 09, 2020
Recommend to a Friend
Great Power Supply
5.0
This is built like a tank and performs to specification. The display is clear and bright. The circular keypad looks odd at first but is very usable once you get used to it. LAN and USB plus outputs are available on the rear of the unit. Many upgradable features. I have bought 2 of them.
Verified Purchase
Nuddimud on
Jun 07, 2020
Recommend to a Friend
Very Good Supply
5.0
This is the 2nd DP832 I have bought. The supply is very well built and performs within its specification. The binding posts are standard width and of a very high quality. All the connections you are likely to need; LAN, USB, etc are on the rear. It has many upgradable features that can be added if desired. The circular numeric pad looks weird at first but it's actually very intuitive once you get used to it.
TedM on
Jun 07, 2020
Recommend to a Friend
Great product at a great price
5.0
Soldering iron works as advertised, lots of different tips available for whatever the use case is.
Verified Purchase
Aaron on
Jun 04, 2020
Recommend to a Friend
Great little scope!
5.0
I still have 1 year left of the waranty though I am sure I will not need it. The bang for the buck on this scope is great. I have had it for 2 years and it has done anything I have asked it to do. I mostly work on audio equipment. The full software upgrade package came with it when I purchased it and the software lifts it from a OK deal to a NICE deal! It is small and light enough to be portable and I have a Pelican knock off water tight case with foam inserts purchased from Harbor Freight for travel, it is well worth the price at around $20-$30.
Verified Purchase
Wayne Parris on
Jun 03, 2020
Recommend to a Friend
Great Workhorse Iron
5.0
I do a lot of soldering at home and at work on a variety of circuits, big and small, and this iron has never let me down. Heats up quick and stays hot, and the iron itself feels great and ergonomic. The user interface is confusing but well-documented, and for how I use it, I've never needed to make any adjustments so it's only a minor annoyance. I'd recommend this in a heartbeat.
Verified Purchase
Evan on
May 19, 2020
Recommend to a Friend
Rigol DP832 Great Power Supply
5.0
I want to start with complementing the great customer service assistance for my first purchase with TEquipment. The Rigol DP832 Power supply has been a great addition to my home lab, especially with the new normal of working from home due to COVID-19. The power supply is very well constructed and very user friendly. The user manual was clear and easy to understand. The power supply was easy to get up and running and the accuracy is amazing. Overall very satisfied with the performance and accuracy of my new power supply.
Verified Purchase
Anonymous on
May 17, 2020
Recommend to a Friend
Great soldering station!
5.0
I would have never been able to solder circuit boards on flight controllers without this tool. Unlike some reviews, I found it easy to navigate the menu. It is super easy to change temperatures while on the fly. Heats up in seconds which is amazing and also cools down quickly to change tips. Haven't got into the programming presets but I'm sure its not difficult.
Kevin on
May 15, 2020
Recommend to a Friend
Hakko FR-301
5.0
Seems like a well built tool..It works very well..After using it I would be very sad to have to go back to the old bulb and braid technique.
Verified Purchase
kris nauman on
May 13, 2020
Recommend to a Friend
Solid
5.0
This has proven to be a great addition to my home lab. I recently needed to test a dc-dc power converter that took 12v in and output several different voltages. Parts of the circuit were blowing trace fuses and others were having voltage issues. The clean power from this supply along with the overcurrent protection made for a great bench test setup.
Verified Purchase
Alex on
May 12, 2020
Recommend to a Friend
Rigol DS1054Z
5.0
Excellent product, value and customer experience. No Cons at this point, only Pros. Unit arrived and works as expected. Product is getting a bit "long in the tooth" and would have loved a newer product design before purchasing but overall a great product. Very predictable use, well supported and documented by Rigol and by user community (social media and multiple forums).
Anonymous on
May 07, 2020
Recommend to a Friend
Reviews are on spot!
5.0
Great tool for beginners and novice hobbyist. Will grow into this as my skills develop. Well built and worth the price.
Verified Purchase
Bryan B on
May 07, 2020
Recommend to a Friend
Unbelievable scope for the price
5.0
I’m thrilled with this scope, after three weeks of ownership. I’m using far more of the advanced features than I anticipated. In this price range, I hadn’t been even thinking of targeting needs like RS232 decoding and triggering, SPI, I2C etc. But being able to cross reference serial comms from my Arduino back to the PC with what’s going on with the downstream electronics has been amazing. I’ve also been using the third and fourth inputs on the scope to give programmatic triggering of the scope from my Arduino - which helped me track down a poor clock signal in a project I was building.
The product builds overall feels very high quality. Very solid, reasonably heavy. Probably the only negative is that the entire width of the screen can’t be used to see the signal, but that’s a pretty minor concern, the screen is already quite wide. Overall, this is a 10/10 product
Verified Purchase
Cormac on
May 06, 2020
Recommend to a Friend
An excellent scope at an outstanding price!
5.0
I purchased this scope to replace my aging Tektronics 2245 analog scope in my classroom. Wow! What a great scope! I can do a variety of demonstrations and measurements, I can save them to a USB stick and use them in presentations, I can actually show my students 3 phase power... the list goes on and on. This is a 4 channel scope with all of the versatility of a much more expensive scope, at a bargain basement price. If you are looking for a scope for educational, hobby or even test bench use, this is the scope to buy.
Verified Purchase
Jeff Greenly on
May 06, 2020
Recommend to a Friend
Hakko FR-301 - Great tool
5.0
I replaced my heavily used older model Hakko desoldering tool with the FR-301. I have used it to desolder point to point solder joints in a tube amp and to desolder IC pins on a switch mode power supply board. It performed flawlessly. I really like the new style filter/ pre-filter setup.
Verified Purchase
Michael L Lloyd on
May 06, 2020
Recommend to a Friend
Great for beginners
5.0
I got this as a beginner oscilloscope as I no longer have access to one from school (covid). I'm very happy with it and haven't encountered anything that I"m not able to do. I'm sure I'll upgrade in the future but it might not be for a while considering how happy I am with this one.
Anonymous on
May 05, 2020
Recommend to a Friend
Outstanding Scope For The Money
5.0
This is a fantastic hobby level scope. Many features, most of which will rarely be used as a hobbyist but they are there none the less. Interface is pretty easy to use and well laid out for the real estate available. This is my first digital scope and I'm glad I went with Rigol the first time around.
Dan on
May 05, 2020
Recommend to a Friend
RIGOL DS1054Z - best in a class
5.0
Perfect digital scope for signal visualization. Working fine, done well. RIGOL have to fix problem with High Resolution 12 bit acquisition mode- it just absent. Declared but absent.
Gennady on
May 05, 2020
Recommend to a Friend
Haako FX-888D
5.0
Nice solder station kit. Combo kit came with extra tips (good selection!) Should read the manual first to figure out how the controls work, but you can just set the temp and forget it if you're doing simple soldering. Perfect for hobbyists, makers, amateur radio, etc. Simple for younger users, too.
Verified Purchase
KD9CJX on
May 04, 2020
Recommend to a Friend
Great scope
5.0
This has been a great scope for the price. Once you go to four channels you can never go back!
Jonathan Spencer on
May 03, 2020
Recommend to a Friend
Best scope I have ever used
5.0
I got this scope because my are not what they used to be, on top of the bigger screen and 4 channel I can use it to check out caps that look good but are no, and check signals in tv's without pulling the board out first.
Verified Purchase
Roger w Peckenpaugh on
May 03, 2020
Recommend to a Friend
Cannot go wrong with Hakko
5.0
Solid tool for a honest price! This is a small enthusiast tool, but it is more than capable for small shops or home DIY projects. Besides, it is still a Hakko... So you know you'll get a quality tool and a warranty you can count on.
Verified Purchase
Anonymous on
Apr 30, 2020
Recommend to a Friend
Highly Recommended Desoldering Tool
5.0
If you have ever watched someone use a manual desolder pump and soldering iron you know the pains of desoldering. Besides the snail like pace, broken pads and traces occur with frequency, especially on older boards. I recently picked this one up and have already desoldered multiple ICs and components with ease on vintage boards. Just remember to use the included cleaning rods if you notice its not pulling up the solder or the end looks sealed.
Verified Purchase
Anonymous on
Apr 24, 2020
Recommend to a Friend
WOW!
5.0
Unbelievable hobby scope:
I've barely tapped the capabilities of the unit, but it does all the basic things you would expect of an oscilloscope effortlessly and very well.
The value is incredible. I am enticed by some of the features on the higher end scopes, but for as infrequently as I would use them, this is a sweet spot on a price/performance curve and an absolute bargain.
Considering the only reason I am likely to use 4-channels is because they are there, the higher bandwidth of the DS1202Z-E might have been a better choice in the long run, but I don't know how I could have gone wrong with either.
Verified Purchase
Robert Marino on
Apr 24, 2020
Recommend to a Friend
Rigol DS1054Z
5.0
Needed to add a digital scope to the bench and couldn't be more pleased. The price per capability cant be beat.
Verified Purchase
Ernest on
Apr 23, 2020
Recommend to a Friend
Rigol DP832
5.0
Great Power Supply with all the capabilities I was looking for. Well built and good price.
Verified Purchase
Ernest on
Apr 23, 2020
Recommend to a Friend
Fantastic product, highly recommended!
5.0
Project would have been a headache to complete without this handy tool. Great stuff!
Verified Purchase
Anonymous on
Apr 19, 2020
Recommend to a Friend
Great power supply!
5.0
I couldn't be happier with the DP832. For the price, ease of user interface, well written user manual and the reliability I am fully satisfied. I've used this DC power supply to operate sensitive laser diode drivers, LEDs and ITO glass projects over the last 15 months. Rigol also has great tech support people, so if you ever have questions they are only a phone call away. TEquipment has been a no hassle supplier for many of my electronics needs and I plan to continue doing business with them.
Randy Mercurio on
Apr 17, 2020
Recommend to a Friend
Professional Quality
5.0
Excellent professional quality tool. Unit comes with a storage case and options for a wide variety of tips. Tip changes are made with a very effective accessory tool and cleaning the chamber is intuitive and easy. The tips need to be stamped for better identification. A minor inconvenience. The vacuum is strong and the adjustable heat settings are more than adequate for most all projects. The included tip stand functions with the tool laying on the bench. Not as convenient and takes up precious bench space. The addition of the Hakko 633-02 can be incorporated for holding the tool in the vertical position for storage. A well made solid feeling tool.
I like it!
Windlord on
Mar 27, 2020
Recommend to a Friend
Quality Product
5.0
The De-soldering tool performs above expectations. Powerful suction and adjustable heat. The additional tips available make the tool extremely versatile. The only suggestion is the lack of recognizable size markings on the tips. The tool performs marvelously with a flexibility of settings that challenge your imagination for the 'perfect" settings/tip for each situation that arises. The cost and quality of the instrument puts it in the professional tool category. The deluxe setup includes the 633-02 Stand to store the tool upright instead of using the (included) tip rest with the tool lying down.
I like it!
Windlord on
Mar 27, 2020
Recommend to a Friend
Great power supply
5.0
This is a great supply, worth the money.
We will be buying more..
Verified Purchase
Anonymous on
Mar 19, 2020
Recommend to a Friend
great product
5.0
worth the price, will last you a long time.
Verified Purchase
Anonymous on
Mar 12, 2020
Recommend to a Friend
Great Product
5.0
One of the best low budget oscilloscopes on the market (if not the best). For its 4 channels and easily hackable 100MHz bandwidth, this is a great purchase that will last you a long time.
Anonymous on
Mar 12, 2020
Recommend to a Friend
Hakko FX888D-23BY
5.0
I am very pleased with the performance with my new tool. I have been using cheap soldering irons for a long time and the Hakko is a huge upgrade.
Verified Purchase
Jim Tesseneer on
Mar 09, 2020
Recommend to a Friend
Rigol O-Scope
5.0
It’s very nice. The only downfall on this piece of equipment is that I have to study to understand all of the excellent stuff it does. When this one wears out I’ll buy another one just like it.
Verified Purchase
Mitch Mabrey on
Mar 07, 2020
Recommend to a Friend
Excellent Value
5.0
I picked up this unit based on several recommendations from professionals. I'm very pleased with the performance thus far. I chose this because I wanted something that was of decent quality but I'm not a pro so I didn't want to spend hundreds. This is the perfect balance of quality and price. They even threw in a roll of solder, picked up the tax and gave free shipping.
Verified Purchase
Lefty on
Feb 25, 2020
Recommend to a Friend
Easy to use beginner oscilloscope!
5.0
This is a great entry level oscilloscope. I bought it to see the EFM signal from a CD drive. Lots of options, I heard it can be upgraded pretty easily by searching online!
Anonymous on
Feb 22, 2020
Recommend to a Friend
Excellent functionality - best price on the Internet
5.0
The Hakko FR-301 is a very well made desoldering tool for sure. It's virtually fool proof to use. Saves time and components. I wish I would have known about this device sooner! Well worth the price.
Verified Purchase
John A Justin on
Feb 20, 2020
Recommend to a Friend
Great scope for a great price
5.0
I have only been using this scope now for a little less than a month, but so far I love it! I have been using it primarily for circuits at audio frequency, but plan on using it to troubleshoot some homebrew radio equipment that I have laying around too. The FFT Math function seems like it will be extremely useful for that! Seems like a good product and TEquipment had the best price that I could find when I was shopping around for it.
Eric on
Feb 17, 2020
Recommend to a Friend
Rigol DP832
5.0
This is a nice unit, but pricey.
Intuitive layout, but still a bit clunky with the circular input. They should have just given it a normal keypad layout. I doubt it was designed by EEs - we don't want eye candy, just easy-to-use and navigate.
My unit has the slightest bit of drift prior to warming up, but stabilizes nicely afterward. Plenty accurate and stabile for the home/amateur setup.
Very nice that they incorporated presets for regularly used settings.
Build quality seems very solid.
Nice unit on
Feb 14, 2020
Recommend to a Friend
De-soldering tool an excellent addition to my tools
5.0
This is my first de-soldering tool. I researched many de-soldering tools before making my purchase and even though this tool had great reviews I was still skeptical. Now that I have used it for a while I can`t imagine being without it. It very easily and cleanly pulls up the solder and cleaning the collection chamber is fairly easy too. I also love that it is not another a big box sitting on my bench. I haven`t tried an extended length tip but I suspect they will work well. Overall I really cannot complain about any aspect of this tool. I am VERY happy with my purchase.
Works BETTER than expected! on
Feb 13, 2020
Recommend to a Friend
Very good tool.
5.0
Makes short work of desoldering. Even wire wrapped terminals are easy to remove.
Guy Arnold on
Feb 10, 2020
Recommend to a Friend
Excellent station
5.0
Excellent station to use. Prior to this, used an iron with controls built into the handle. This station makes soldering much easier. Quick heat up and recovery times. UI leaves a bit to be desired, but perfection is a concept, not a state.
Verified Purchase
Trent on
Feb 10, 2020
Recommend to a Friend
Great value
5.0
This has been my go to power supply for some time now. Just wish it had a higher amperage.
Verified Purchase
Matthew Schinault on
Feb 03, 2020
Recommend to a Friend
Great device and options
5.0
It will take me quite a while to learn all of the features available with this oscilloscope and I am excited to learn! Saving bench footprint with this device is also important to me. Thank you for the Official options pre-installed as well.
Beautiful design with more functions then I dreamed of. on
Jan 30, 2020
Recommend to a Friend
Fantastic Scope
5.0
Great scope for audio work. Would def recommend for someone's first scope.
Anonymous on
Jan 16, 2020
Recommend to a Friend
Rigol DS 1054Z
5.0
I purchased an open box unit. Looked brand new.All the accessories were brand new. Works great!
LG Systems on
Jan 09, 2020
Recommend to a Friend
Better than I expected
5.0
I went to trade school for electronics repair a couple decades ago. We learned to use solder wick and cheap solder suckers. I've been using those for years. I knew these desoldering irons existed but I thought the solder wick was fine (it does help that I have a nice JBC iron). Well I saw this in use on Youtube channel Mr Carlson's Lab and I decided to give it a try and WOW! I've used it to repair several items. I replaced some high current relays yesterday and I put this to power 3 out of 5 and I don't even think I needed to turn it up that much. It melted that stuff like butter. The vacuum function works really well.
The only other desoldering iron I have owned in the past was a Radio Shack one many years ago that cost somewhere between $25 and $50 and that was totally useless. I can't compare this product to any other actual decent products.
But for the price I doubt other brands would stack up.
I do recommend getting a better stand. I don't really enjoy laying the iron on its side with the "stand" (more like tip protector) it comes with. But it does more or less work.
Verified Purchase
Dan D on
Jan 09, 2020
Recommend to a Friend
don't look further
5.0
We use those power supply everywhere. They are powerfull enough for what we do, 3 channels to power 2 differents devices plus the electronics in 5V, easily configurable. The ethernet communication make it easy to control from whatever software you want. If you buy the high resolution license, you have 3 digit precision on the screen ! Cheap for what is it and works fine.
Benoit Duret on
Dec 30, 2019
Recommend to a Friend
Spectacular Supply
5.0
I have gotten a lot of use and had a lot of fun with this supply over the past two years. I don't think it can be beat for the price. One of the small things I really appreciate is that it continuously displays the voltage and current set points and over protection limits as well as the delivered voltage and current. I use a lot of small supplies at work and have found it way too easy to mis-set them. Current and voltage limiting features have saved several circuits.
Verified Purchase
Jeff Roach on
Dec 27, 2019
Recommend to a Friend
Love these
5.0
Just purchased another DS1054Z, I love these. So simple to use for my daily tasks. Considering one? Don't, just buy it.
Verified Purchase
Craig Hollabaugh on
Dec 27, 2019
Recommend to a Friend
Amazing
5.0
I'm stunned at the functionality for the price! Highly recommended.
Finn on
Dec 18, 2019
Recommend to a Friend
Best scope in this price range!
5.0
The reviews say it all, this scope has a huge following across the web. It has proven very upgradable and reliable over the years I've owned it!
Verified Purchase
Chris on
Dec 16, 2019
Recommend to a Friend
Excellent power supply, cheap and full of features
5.0
Works perfect right out the box. I use to have a cheap power supply that was not reliable so I bought this and definitely I don't regret. Plenty of nice features and cheaper than other brands. It is a good quality power supply that works very well and fulfill it's promises.
Verified Purchase
Diego Bouvier on
Dec 15, 2019
Recommend to a Friend
Effective, cheap
5.0
This power supply is a must to have in a lab. There is 3 output, all 3 programmable. You will need licenses for the LAN connectivity and for the high resolution. By default, the display is "locked" to 1 or 2 resolution digit, but with a 100$, you can have the full resolution which is 3 ! The LAN connectivity make it very easy to program over ethernet and connect perfectly with LabVIEW. We have several of those units here and no problem !
Benoit on
Nov 26, 2019
Recommend to a Friend
Perfect tool for reworking through hole PCBs and power supplies
5.0
This tool is a game changer. Successfully removed 40 pin DIPs which literally fell out of the PCB after unsoldering and large snap-in caps on power supplies without damaging the PCB. Heats up very quickly and has plenty of power to heat large ground planes to melt solder. Strong vacuum pulls the solder out in one trigger click. Easy to clean too. Well worth the investment!!
Anonymous on
Nov 21, 2019
Recommend to a Friend
High Quality Soldering Station
5.0
Do yourself a favor and get a quality soldering iron like this Hakko. The base station is heavy and solid, it is well made, and even the stand is made of metal, decently heavy, with rubber non-slip feet. So it's not going to slide all over the place on your bench or get easily knocked over. The soldering iron itself has similar quality, and Hakko irons/tips are so good, there are a whole ton of cheap knockoff versions out there! This iron is a case of "one and done" - buy this one, and be done with buying soldering irons for a long, long time.
Verified Purchase
Matthew on
Nov 09, 2019
Recommend to a Friend
Excellent product, supper fast shipping
5.0
I used this iron regularly for the past four months. Never give a problem and very solid performance. With the fast shipping and price here, you cannot go wrong with this.
Verified Purchase
Dave on
Nov 08, 2019
Recommend to a Friend
Great scope for hobbyists and engineers looking to get started
5.0
I've wanted a scope for a long time at home, and after reading around I decided to splash for this one. I couldn't be happier! After setting it up, which wasn't very hard (although Australian buyers beware: you'll need to get your own power cable, it's just a regular PC supply cable so a 7 dollar one from a local store works fine) I turned a 5 hour troubleshooting session into a 10 minute fix. The 4 channels make repair and troubleshooting work a heap easier than a 2 channel scope and the menus are easy to learn.
Verified Purchase
Anthony Lewis on
Oct 28, 2019
Recommend to a Friend
Nice cheap escope.
5.0
Much more for much less. It perfectly suits a small and medium sized laboratory. It has several measurements that are found only on more expensive equipment.
Verified Purchase
Alexsandre Avila on
Oct 23, 2019
Recommend to a Friend
Awesome Value
5.0
I've used many o-scopes in my career as an EE since 1980. Now retired, bought this one for hobby and consulting work. This thing is a great value if you can live with 50 Mhz BW. So many cool, handy features that are easy to find and use. And at an astounding price! Tektronix, if you want to stay in the o-scope business, you better get after it!
Verified Purchase
Bill Rodgers on
Oct 20, 2019
Recommend to a Friend
FX888D Soldering Station
5.0
Great iron/station. Intuitive UI/controls, gets up to temperature fast, solders great. Thanks.
Verified Purchase
Scott Brown on
Oct 11, 2019
Recommend to a Friend
One Great Little Scope
5.0
I love this oscilloscope so much! Make my work so much easier. This replaced a dual trace B&K scope from the 80s. Don't know why I waited so long.
on
Oct 11, 2019
Recommend to a Friend
Initial results positive
5.0
I've just used the FR-301 a bit after receiving it. It worked great on the single sided board I need to fix immediately. Solder was completely removed and part fell out of the board. Will report back when I've had more experience...
Initial use is fantastic on
Sep 26, 2019
Recommend to a Friend
Excellent Product
5.0
Excellent Product
Verified Purchase
Anonymous on
Sep 12, 2019
Recommend to a Friend
Excellent value
5.0
With all of the options unlocked, this is an amazing value.
John Lee on
Aug 17, 2019
Recommend to a Friend
Excellent value
5.0
I have made careful measurements of this device. I continues to impress me. Rock solid
John Lee on
Aug 17, 2019
Recommend to a Friend
Great Soldering Station
5.0
Had held off buying one of these for a while, but I finally decided to take the plunge. Tequipment had the absolute best price I could find, especially as an educator. Soldering station is well built and works great. Only wish I had more soldering projects to work on!
Verified Purchase
Andy on
Aug 15, 2019
Recommend to a Friend
Amazing Value
5.0
This scope is an amazing value. The SCPI commands are robust to control every aspect of the scope via IP and do screen grabs from the device over the network. This also allows for the scope to be used as a remote acquisition device to get any of the numerous measurements remotely via IP. - Endless possibilities with it remote - as well as how well it works on the bench by pushing the buttons. HIGHLY recommend this instrument for all levels of skill, will impress even advanced users familiar with the much more expensive scopes.
Verified Purchase
John Detrick on
Aug 12, 2019
Recommend to a Friend
I like this iron
5.0
My first digital soldering station with the Preset mode. I need to figure this out as the factory settings seemed to be working fine, but I touched one of the two front panel control buttons and it was off to the races / instant 899°F. Nice compact Digital Soldering Station - My first jump over to Hakko - and I am pleased as punch. The iron fits well in my hand - cools down so so when I need to change a tip, it seems that a 10mm wrench does the trick. Overall I am very pleased - The price is right and it came with a 1 lb Amerway - SN63 / PB37 Tin / Lead Solder. I even like the USA Blue/Yellow Colorway.
Verified Purchase
Jonathan on
Aug 06, 2019
Recommend to a Friend
Great Tool......
5.0
All the hype is true, if you do more than just a little soldering this is the bomb. Spend a little extra and go for it, you won't regret it. So happy with my purchase.
Verified Purchase
Jim Doherty Jr on
Jul 29, 2019
Recommend to a Friend
Quality product
5.0
This is an amazing soldering station. I did a lot of research before buying this product.
It's about a hundred USD so it's not the cheapest soldering station out there. However, this product is really well built - I'm probably going to get a new station for features before this stops working, and replacement parts are really easy to find.
Hakko also produces literally every tip type you may need!
Verified Purchase
Devyash Lodha on
Jul 19, 2019
Recommend to a Friend
nozzle size
3.0
FR301 is a great tools for de soldering, I wish they have a much bigger size of nozzle use for IGBT power pack terminals and for relay terminals.
Verified Purchase
Noel Declaro on
Jul 15, 2019
Recommend to a Friend
HakkoFR 301
5.0
Recently while in NYC decided to buy a Hakko FR301 replaciny my accidentally broken FR300, i am not going to say much but this Hakko devices really do well all you expect them to do.They are a handy affordable charm and for sure will save you lot of effort and PCBs.5??????????
Verified Purchase
nelson baez on
Jul 10, 2019
Recommend to a Friend
Best scope for the price
5.0
This is the best entry level scope!
Verified Purchase
Christian Llanes on
Jul 05, 2019
Recommend to a Friend
Great scope
5.0
This is by far the best entry level scope for hobbyists.
Christian on
Jul 04, 2019
Recommend to a Friend
Good Iron
5.0
So far this is a very good soldering station. Easy to use and heats up quickly.
Thanks;
David
Verified Purchase
David on
Jul 04, 2019
Recommend to a Friend
WELL WORTH THE PRICE
5.0
I f your wondering if you can afford this the answer is YES.Works well, de-solders quickly. Components fall out depending on the woirk. Makes having to de solder anything a fun project. Clean up is straight forward. It has worked well for me. Your mileage may vary.
1966 on
Jun 28, 2019
Recommend to a Friend
Solid
5.0
I'm very pleased with this supply. Works well, is accurate and easy to use. The fan is very audible, but I don't find it bothersome or even noticeable except when turning it on or off.
Verified Purchase
Scott Case on
Jun 20, 2019
Recommend to a Friend
Well worth the price.
5.0
As an amateur who is getting into board repair and retro gaming reproduction, this desoldering gun makes crazy fast work of stripping down PCBs. It's well worth the price in terms of how long it would take to strip a board of its components with regular methods.
Verified Purchase
Jose Guerra on
Jun 08, 2019
Recommend to a Friend
We have 4 of these and they are great!
5.0
Just bought our 4th one for the lab, great price and performance. A must have.
Verified Purchase
Matthew Schinault on
Jun 04, 2019
Recommend to a Friend
Great Supply
5.0
Plenty of features, does the job well with no problems. Good price point.
Verified Purchase
Matthew Schinault on
Jun 04, 2019
Recommend to a Friend
No complaints
5.0
Well packaged and quickly shipped. Used all the basic functionality of the scope so far, and it beats my experience with previous analog scopes. Pros: small size (less bench space), feature packed, 4 channels. Cons: a bit loud (might try to modify the fan once out of warranty), long boot time.
Verified Purchase
Anonymous on
Jun 03, 2019
Recommend to a Friend
Should have bought a long time ago!
5.0
Excellent tool! I always hated desoldering components because of the chance of overheating parts and pcb traces. This tool works like magic.
Verified Purchase
Andrea Lini on
May 26, 2019
Recommend to a Friend
Arrived quickly and we got started right in
5.0
It came very quickly and we started right in, trying the suggestions in the manual.
Very happy w the choice.
CA
Caffel on
May 17, 2019
Recommend to a Friend
Great Addition the Lab Bench
4.0
This unit has replaced a different lab supply that had issues with changing/losing voltage settings which was very unnerving. The DP832 has great options for setting and saving configurations and so far it was worked very consistently. It takes a bit of effort to navigate those functions but there is a lot of flexibility.
Physically the unit is quite long but workable. The fan noise is louder than I would like but not whiny like other test equipment that I have so it's not as annoying. Would get 5 stars if the fan was quieter.
Very happy with this item.
Verified Purchase
Duncan MacGregor on
May 16, 2019
Recommend to a Friend
One couldn't ask for more..well maybe
5.0
Great instrument for the price. Factory installed upgrades a plussss.
Easily installed the last 2. Coming from an analog Tek 465, it does have an adjustment & learning curve and I am still working on that.
TE ordering & shipping was easy and fast.
The only comment is that I wouldn't consider the "Engineers" real engineers. They are sales people with some technical knowledge.
Anonymous on
May 12, 2019
Recommend to a Friend
Good enough to buy two
5.0
I was happy enough with this that I eventually bought two of them in total. It's just a solid lab power supply with three programmable outputs. Not a lot of excitement, which is what you'd want in a power supply.
The user interface is decent although many complain about the encoder wheel to set values. It could definitely be more streamlined, but you get used to it.
The only part of the UI that I found almost unusable was the timer functionality, where you can set it to step through different voltage and current limits. It may have improved in later firmware revisions, but it was very unclear where the sequence was supposed to stop, and using the prefab templates seemed to not work at all. However, most people will probably never use this functionality, or will automate it externally with LXI etc.
Verified Purchase
Michael H. on
Apr 29, 2019
Recommend to a Friend
Good standard iron
5.0
A good "standard purchase" iron, this one has been serving me well for quite a while, as well as a great many others.
My only complaint is the user interface and how easy miscalibration is, which caused me to erroneously set the calibration temperature versus the set point temperature on more than one occasion. That in turn caused me to buy the Hakko FG100-2 tip thermometer to recalibrate the station, which is more than double the cost of the station itself! (But worth it, in any case.)
If I had to do it again though I would probably buy the Pace ADS200; not because there is anything wrong with the Hakko station, which is really pretty good, but just because the Pace is that much better without being unreasonably priced like some of the JBC/Metcal equipment.
Verified Purchase
Michael H. on
Apr 29, 2019
Recommend to a Friend
Rigol DP832 Power Supply
5.0
This power supply most positively a welcome addition to any laboratory. It is precise and easy to use. I have bought about 35 of these already. Very well made.
Tabrizi on
Apr 21, 2019
Recommend to a Friend
Hakko FR-301 Desoldering Tool
5.0
Very good quality, and works great. Fits my business perfectly. Was also impressed with how quickly it arrived! Highly recommend this device!
truefret on
Apr 18, 2019
Recommend to a Friend
Perfect affordable soldering station
5.0
Ideal for 99% of my soldering needs. A bit pricey, but it's built properly and won't burst into flames like a typical low-dollar Chinese unit. Cheap clone tips work great, too.
Verified Purchase
Anonymous on
Apr 15, 2019
Recommend to a Friend
Bargain for the price
5.0
Well built unit, tons of features, and a pricetag that's surprisingly reasonable for what you're getting. This isn't a $5000 scope, but it's well above it's price class.
Everything arrived well packaged and on time.
Verified Purchase
Robert on
Apr 04, 2019
Recommend to a Friend
Super Value!
5.0
Came from factory with all options permanently enabled except for 100MHz. A software update fixed a "2 detents to change" encoder issue (in general, mechanical encoders are notoriously difficult to integrate, and have really bad wear issues). Text on the screen is a bit small for my old eyes, fan is a bit loud, the FFT could be more responsive and useful, the control panel and screen are rather busy, but beyond that I don't have anything negative to report. Came with four 1x/10x probes that work fine, boxed well for shipment. For what it is and can do it's a tremendous bargain!
dewster on
Mar 27, 2019
Recommend to a Friend
Great shipping great product
5.0
HAKKO FX888D-23BY DIGITAL SOLDERING STATION, is an awesome soldering station, and TEquipment was great to work with and shipped quickly.
Verified Purchase
Kevin Allred on
Mar 26, 2019
Recommend to a Friend
Rigol DS1054Z Oscilloscope
5.0
I love the look and feel of the product. It is reasonably easy to use even
for someone with very little experience using such devices. I don't think
that it is possible to beat it for the price.
Verified Purchase
NormG on
Mar 20, 2019
Recommend to a Friend
Excellnent value
5.0
I purchased this unit last week and after using it I was very impressed. Iron heats up quickly and adjustable temp works well! Tips last for a long time as well!
Verified Purchase
Robert M. Gaw on
Mar 19, 2019
Recommend to a Friend
More than an entry level scope
5.0
Fabulous, I am delighted. This is perfect for my use. As a recording studio owner 50Mhz (or 100Mhz with upgrades, wink, wink) is well within my needs, but great to have. Great options, nicely built, and easy to use. I like it, worth the price of admission.
Verified Purchase
Mark A Reynolds on
Mar 15, 2019
Recommend to a Friend
This thing is a beast
5.0
This is perfect for my use. As a recording studio owner it's is well beyond my needs, but great to have. Great options, nicely built, and easy to use. I like it, worth the price of admission.
Verified Purchase
Mark A Reynolds on
Mar 15, 2019
Recommend to a Friend
A must have tool
5.0
I used to hate desoldering so bad and this tool makes really makes it easy. Very easy to use and heats up quick. The pump removes all solder with no problem at all. Easy to take apart and clean. I can kick myself for not buying this a long time ago.
Verified Purchase
Bill on
Mar 10, 2019
Recommend to a Friend
HAKKO FR-301 DESOLDERING TOOL
5.0
I just wish I had this desoldering tool years ago, it works great. I have used it on through hole circuit boards and also de-soldering hand wired old tube radio circuits. I can't believe how clean it will leave a tube socket terminal that you can then just untwist the wires.
Verified Purchase
Richard Nagel on
Mar 09, 2019
Recommend to a Friend
DS1054Z Star Performer
5.0
As a hobbyist, I don't have an unlimited budget for quality hardware. The DS1054Z is an exceptionally great value for cost to performance and I really appreciate that. You have a company that stands behind it's product, with the technical prowess to provide help when those times crop up.
I have been extremely satisfied with the product's performance and the reliability will be determined in the future, but with this scope being a top seller for the last 5 years, that speaks for itself.
You can add my endorsement to the growing list of people that have found this unit to far exceed expectations and put me down as one happy satisfied customer.
Verified Purchase
Tecstar1 on
Mar 08, 2019
Recommend to a Friend
DP832
5.0
I am not your typical professional writing a review, I am purely a hobbyist that appreciates quality hardware that is going to last. I only want to make a purchase once and be able to rely on your equipment performing it's intended operation. The DP832 provides flexibility on designing home circuits with varying requirements for power. I typically have 3 or more circuits in process at one time, and having 3 separate outputs makes it simple to select prior setups. The Rigol DP832 has exceeded my requirements, and I am sure will be a part of my system for years to come. Great value in my opinion.
Verified Purchase
Tecstar1 on
Mar 08, 2019
Recommend to a Friend
Works great
5.0
Desoldering is the job I dread most. This tool makes desoldering easy.
Verified Purchase
T. Gatlin on
Mar 05, 2019
Recommend to a Friend
Hakko FX888
5.0
Hakko iron is well made Solid and heats to temp quickly. . Delivery was prompt and pricing excellent.
Using for small jobs on vintage stereo equipment.
Order from Tequipment-the product is the real deal and not some knock off.
Verified Purchase
Anonymous on
Mar 04, 2019
Recommend to a Friend
DP832 Lab Power Supply
5.0
My over all impression is that this is an excellent power supply for the cost. I found that even though I don't need glasses to work on my computer, the small screen requires a magnifying glass or a set of reading glasses. It needs a handle that can be used to place the case at an angle on my bench to make it easier to read. I also wish that it came with a User Manual, instead of having to download from the internet. The unit performs well and looks good and I liked the software upgrade features. I would buy it again.
Verified Purchase
Larry W Millholland Sr on
Feb 27, 2019
Recommend to a Friend
Outstanding Value
5.0
It's not a LeCroy, but this is an outstanding value in a scope! At the current price, especially with the included software bundle, there is probably nothing else on the market which can compare. I'm very happy to have it on my hobby bench.
The menu structure is a little quirky in places, but easy to learn. The front panel is layout is pretty good. The response time is fine for hobby work but would be a little slow if I were in a big hurry on a commercial bench. The included manual is really basic, so if you have questions be prepared to hunt around online for answers.
My only real complaint is the somewhat touchy selector knob. It's too easy to overshoot the desired setting, but it's just a minor annoyance.
Bob on
Feb 25, 2019
Recommend to a Friend
Great beginner scope.
5.0
I wanted a beginner scope to help troubleshoot and work on old 8 bit computers and some ham radio projects. I've never used a scope before and had this doing what I needed in 5 minutes.
The only thing I would say is a negative are some of the font sizes. It can be tough to read at times.
Verified Purchase
PaulD on
Feb 24, 2019
Recommend to a Friend
RIGOL DS1054Z DIGITAL OSCILLOSCOPE REVIEW
5.0
Incredible value for money. Where do I start? Huge range of trigger options, large number of math and statistics measurements available. And a hardware frequency counter. And much, much more. Did I mention that you're getting a 4 channel scope with all the above features for $375?
Verified Purchase
James Spottiswoode on
Feb 22, 2019
Recommend to a Friend
New and improved? Ayuh
5.0
I have been the proud owner of the Hakko 808 for several years. It was time to get this new design. I am happy so far, an easy five stars.
Verified Purchase
Michael Higgins on
Feb 19, 2019
Recommend to a Friend
Great value soldering station
5.0
The Hakko FX888D soldering station is a great value for money. For around $100, it heats up faster, and does a better job than a more expensive Weller it replaced. The built quality is excellent as well. Good variety of low priced tips are available for it. A definite buy.
Verified Purchase
keith virge on
Feb 18, 2019
Recommend to a Friend
Awesome Power Supply
5.0
This piece of equipment is vital to all the development and testing that I do. With the isolated power I can produce positive and negative sources along with 3.3 or 5 volts for microcontroller applications. Is a little pricey for the average hobbyist but well worth the investment. (and i would but this again in a heartbeat)
Verified Purchase
John Wilson on
Feb 08, 2019
Recommend to a Friend
I2C decode
5.0
This is a comprehensive scope with great advanced features such as I2C that i use all the time in development and interfacing to other products. This is not too hard to setup and operate. I like this scope for the money you cannot beat it.
The only drawback is that the decode features are software based so that you have to be careful when viewing data.
Verified Purchase
John Wilson on
Feb 08, 2019
Recommend to a Friend
Amazing soldering station
5.0
Great product, heats quickly, holds the heat well even when soldering thick PCB. My first major purchase of a more professional oriented soldering station, and I am greatly impressed. I'll never go back to local hardware store junk irons again. Been eyeballing a Hakko station for years and glad I finally made the purchase. Ill highly recommend this station to anyone who is looking to invest in a high quality soldering station.
Verified Purchase
James Gosnell on
Feb 07, 2019
Recommend to a Friend
Great tool
5.0
I wish I would have bought a desoldering tool like this 10 years ago. Solder wick is such a pain, and those manual suction tools suck -- not in a good way. I removed a dozen components from a board with ease using this tool in like two minutes. It's almost magic.
Verified Purchase
Jason Baker on
Feb 05, 2019
Recommend to a Friend
FR-301 - excellent tool w/one easy-to-fix issue
5.0
I used my new Hakko FR-301 desoldering gun for the first time yesterday. I was very pleased with the performance of the gun. It is comfortable to use and does a really good job of cleaning out via holes, leaving through-hole component leads free to drop out.
To save their tips from oxidizing and making them difficult to wet with solder, I typically turn irons off while doing other operations until I am ready to use them again. The FR-301 comes up to temperature quickly which facilitates this.
The only complaint I have with the unit is that the power-on indicator light is on the wrong side of the handle. The indicator on the FR-301 is not visible when the gun is parked in its stand. It would be better to have the indicator visible from any vantage point at any angle, or at the very least somewhere on the back, like perhaps on or around the power switch itself. As it is now, you have to remove the unit from the stand and turn it around to veiw the indicator. It could be brighter too. Presently, it is rather dim and difficult to see. The FR-301 is, otherwise, an excellent tool.
You may want to pass this information on to the manufacturer.
Thanx, G. Knoedl
Verified Purchase
George Knoedl on
Jan 31, 2019
Recommend to a Friend
Amazing
5.0
I love this little thing. It's pretty amazing to unsolder headers and have them just come loose. It's a game changer!
Verified Purchase
Anonymous on
Jan 29, 2019
Recommend to a Friend
Very well-built, small scope
4.0
This is a great and widely recommended entry-level quad channel scope. It was smaller than I anticipated, which for me is a very good thing. The screen and overall build quality are very good, all controls are intuitive if you have ever used as scope before. Recommended.
Verified Purchase
codex0 on
Jan 21, 2019
Recommend to a Friend
Excelent Power supply with built in turbine
4.0
I got this power supply over a year ago and it is a solid performer on my workbench. It's used for hobby applications and I never had issues with it. I mainly use it from the front panel but tested some simple setups in LabVIEW in combination with the DM3068 DMM and a DS2302A scope...no issues.
It took a little while to get used to it but now I really like the user interface.
The huge complaint is the build in fighter jet turbine. I thought the DS2302A scope is loud, after I installed this power supply I learned the scope is whisper silent. I don't know how you can design bench equipment that is designed to sit in front of the user which is so noisy. Yes it's not a pricy power supply but the efforts to minimize the noise aren't too pricy either.
My unit is out of warranty now and I will definitely look into alternative fans that reduce the nose without loosing air flow.
Other than the noise complaint this is a very nice power supply for the price.
AC7FD on
Jan 21, 2019
Recommend to a Friend
Great for the price
5.0
Heats up really fast. Easy to control and lots of different size tips to use.
Verified Purchase
Kenneth Veznaian on
Jan 20, 2019
Recommend to a Friend
A well-made tool !
5.0
After struggling along with an older soldering station, the HAKKO FX888 soldering station and its quick heat recovery time has made work a breeze! ps... don't forget to order a variety of tips.
Verified Purchase
Bruce Manning on
Jan 17, 2019
Recommend to a Friend
A wonderful addition to our bench!
5.0
The HAKKO FR-301 was recommended by a seasoned professional tech. This rugged instrument is saving valuable bench time bringing back to life our vintage arcade machines.
Verified Purchase
Bruce Manning on
Jan 17, 2019
Recommend to a Friend
Very Nice Instrument!
5.0
The Hakko soldering station was recommended by a seasoned tech. I am enjoying the quick heat-up and recovery. A solidly built tool. Just a reminder... be sure to order a variety of tips for your projects.
Verified Purchase
Bruce Manning on
Jan 15, 2019
Recommend to a Friend
DS1054Z
5.0
I just received my 1054Z. I was very pleased with the speed of shipping and the way the unit was packaged. Working with TEquipment was an extremely pleasant experience. The folks there are knowledgeable and polite. The scope appears to be well built and functioned properly right out of the box. I am very pleased with the entire experience!
Verified Purchase
tl on
Jan 15, 2019
Recommend to a Friend
Hakko FR-301
5.0
This Desolder Tool was highly recommended by a seasoned circuit pro. I was pleased with its ruggedness and ease of use. I would suggest purchasing at least 4 additional tips in order to be ready for any project.
Verified Purchase
Bruce Manning on
Jan 14, 2019
Recommend to a Friend
Rigol DS1054Z Oscope
5.0
This Oscope was purchased as a gift for a friend who repairs and refurbishes amplifiers and speaker cabinets for electronic instruments.
His complaint before having the scope was he couldn't see what the electric was doing. Now he reports he's on cloud nine with this scope.
Turned out to be a great gift to a good friend,
Frank on
Jan 12, 2019
Recommend to a Friend
Great Value for EE student
5.0
I'm an electrical engineering student and bought this scope to take my measurements up a notch. I'm extremely impressed at all the functionality in this scope for the amazing price. This is an awesome learning tool and hope to keep gaining new knowledge with it for years to come.
Verified Purchase
Joshua Vandermeer on
Dec 25, 2018
Recommend to a Friend
get it, won't regret it
5.0
Great scope, excellent price, and comes with ALL software features enabled, thanks to Rigol / TEquipment. This vendor is the best! Highly recommended.
Verified Purchase
gershon on
Dec 21, 2018
Recommend to a Friend
great value, well-built supply
5.0
The DP832 is a great value. There's really nothing in its class at its price. Can't comment on the long term yet, as our model is new, but it feels solid. I was concerned about the loud fan comments, but I haven't found the DP832 unusually loud, particularly in a lab environment. I might consider a DIY fan replacement if I were in a quiet office. It would be nice if Rigol enabled all the features in the hardware, instead of selling license keys separately. That seems to be their trade-off for lowering the barrier to entry.
Verified Purchase
gershon on
Dec 21, 2018
Recommend to a Friend
Excellent!
5.0
This desoldering iron is great! Make a job that took a few minutes take seconds now! No issues with it getting stuck-up with solder or anything.
Verified Purchase
Beth N on
Dec 19, 2018
Recommend to a Friend
DS1054Z delivers, powerful scope, great value
5.0
The DS1054Z is a much better scope than I expected given the price. It came with 4 probes and all the software options already unlocked. The shipping was fast and easy. I would definitely recommend it for beginners and advanced users but think someone who wants to use it as a logic or protocol analyzer should go with a stand alone solution (like the saleae logic pro 16 or something similar).
Verified Purchase
Richard on
Dec 07, 2018
Recommend to a Friend
I am super pleased with this DSO
5.0
The scope build quality and operation are excellent and hard to distinguish from our higher end scopes. Many of the knobs also press, for example to center the vertical at zero or change to zoom mode. In fact many features I find to be easier.
This is a very nice oscilloscope. It is very affordable and has great features. I was so satisfied with the first one I bought, that I went back to buy another one without hesitation.
I think that this instrument in its segment probably has the best cost-benefit ratio in the market.
Verified Purchase
Eric Dahlgren /R.Iglesias on
Nov 28, 2018
Recommend to a Friend
Highly recommended
5.0
I bought a number of these. Excellent buy for the money. No real time clock, but a non issue for me. Highly recommended!!
Verified Purchase
derf44 on
Nov 23, 2018
Recommend to a Friend
FR-301
5.0
I used a solder sucker one time and new that it was something I did not want to continue. Almost every review I read the person said they should have bought a de-soldering tool years ago. I took that advice and am happy I did. This thing works like a champ. I have little to compare it to but it works great and makes life much easy.
Raven on
Nov 22, 2018
Recommend to a Friend
Best bang for buck
5.0
This is my second DS1054Z: purchased this one strictly for personal work usage. Can't beat the price/value.
Verified Purchase
Jamie on
Nov 20, 2018
Recommend to a Friend
Excellent !!!!
5.0
All it was touted to be and more, outstanding design and superior performance.
Just regret not having purchased this outstanding soldering tool sooner !!!!
Great VALUE !!!!
Robert Chartier on
Nov 06, 2018
Recommend to a Friend
Fantastic value!
5.0
Has more features and capability than I ever imagined at this price point, or even much higher. It has its limitations, of course, but most of the complaints you may see (input noise, frequency measurement inaccuracy, etc) are not faults, but characteristic of this type of instrument. It does what it should, and very well.
Verified Purchase
Brian Dunham on
Oct 30, 2018
Recommend to a Friend
Works well
5.0
While 50 MHz has its limits in the digital you can still get some basic debugging done.
This scope works as well (and sometimes better) than the older analog CRT scopes ire[aces.
The measurement capabilities make things go faster.
Well worth the price.
When I need a higher BW scope or a large logic analyzer renting them still works well.
Verified Purchase
VirgniiaGuy on
Oct 24, 2018
Recommend to a Friend
Excellent
5.0
High quality product, I really recommend this product.
Verified Purchase
José Luis Herrera Corrales 112 on
Oct 23, 2018
Recommend to a Friend
Awesome solder station
5.0
I thought I was horrible at soldering and decided to give it one more go. Did a ton of research and landed on this. Turns out I dont suck at soldering, my old iron did...
This gets hot quick and the holder/cleaner is a nice bonus. Menu is a bit wonky but I dont have to change temps to often
Verified Purchase
Ryan Conroy on
Oct 19, 2018
Recommend to a Friend
Great tool for the money!
5.0
I just retired so now electronics is my hobby and not a profession. I'm pretty old school so I'm comparing this scope to my trusty Tektronix 465 100 Mhz scope. Happily, the Rigol is very easy to use right out of the box and all of the common essential functions are still accessed through knobs and buttons. There are a bunch of menu driven options - not my favorite way to set up gear - but even those are easy to navigate. I've heard complaints about all modern digital scopes crashing (anything that's software driven will crash after all) but I haven't experienced any problems with mine. I sure don't need all 4 channels all the time but how can you go wrong at this price? Most of my applications are audio (I build analog synthesizers) so 50Mhz is more than enough bandwidth for what I do. This is my third purchase from TEquipment and as always it has been a great experience. If you only need 50Mhz of bandwidth, you can't go wrong with this scope.
heygtrgar on
Oct 14, 2018
Recommend to a Friend
Easy to use, best repair tool ever
5.0
I wish I'd bought one of these years ago. Even if you only do occasional repair work, this is vastly superior to the two-handed iron and solder-sucker arrangement. Avoiding damage to even one circuit board pays for the tool.
Verified Purchase
Brian Dunham on
Oct 04, 2018
Recommend to a Friend
Perfect!
5.0
Don't hesitate. It performs its function perfectly. Follow the directions. The included tip is probably fine for most jobs.
Verified Purchase
JFM on
Sep 30, 2018
Recommend to a Friend
Hakko FR-301 - Great quality
5.0
Very well built. Heats up quickly and did a great job desoldering components from single and multi layer boards.
Verified Purchase
Jeff Hecht on
Sep 29, 2018
Recommend to a Friend
Works Great
5.0
I've been using solder wick and manual solder extracting devices for 40 years. I've been thinking about the Hakko FR-301 for several years wondering if I spent this much money would it be a tool or a toy. Just got it yesterday and it is definitely a tool that I hope to use for years ahead. Very happy with my purchase.
Charles G. on
Sep 20, 2018
Recommend to a Friend
Rigol DS1054Z Digital Oscilloscope 50 Mhz DSO 4 Ch
5.0
I just received this oscilloscope about 2 weeks ago; I know that this just an entry level oscilloscope but it has a lot going for it and the price is great. I have some analog scopes but no digital. What I like the vertical and horizontal buttons on the side with lots of options. I have heard some say the screen is a little small. But compared to the size of the unit it a good size and I have to ware reading glasses. The screen is easy to read. Then there is a real nice save or print button. XY mode can have a split screen or with a push of a button YT mode for wave sine. Lots of measurements can be seen on the screen with just a push of a button. There is a lot more and the price you just can't beat it. I am currently troubleshooting a TV with it and found 5 defective electrolytic capacitors with this DS1054Z oscilloscope. I do not have a lot of money nor the need a high price oscilloscope. This one is just great for me.
Verified Purchase
Stanley Johnson on
Sep 12, 2018
Recommend to a Friend
Rigol DS1054Z Digital Oscilloscope 50 Mhz DSO 4 Ch
5.0
If anyone is interested in getting this Rigol DS1054Z Digital Oscilloscope 50 Mhz DSO 4 Channels don't hesitate to buy it directly from Testequipment.net.
Not only will you get a quality product but it will also include some very helpful and useful software to install on the Rigol DS1054Z Digital Scope which will unlock a multitude of features. This package comes free with purchase through Testequipment.net which retail value of $$$ and only available here.
Do not purchase through A****n/ E**y, etc...since you will only receive the Rigol Oscilloscope and not the bonus software upgrades $$$.
I'm glad I did my homework and got it here. I have been wanting an Oscilloscope with these features and the price for sometime, and well it's a steal considering all the features it comes with. You won't regret it.
Thank You Testequipment.net for help making my purchase fast & pleasant.
J.J. on
Sep 06, 2018
Recommend to a Friend
Great tool
5.0
One of the most important tools a hobbyist should have. In my opinion, the form factor is the best, as it fits even on a small bench.
Verified Purchase
JAIRO ALBERTO ROJAS BOYACA on
Aug 18, 2018
Recommend to a Friend
Useful Tool
5.0
This has been a quite useful tool for me as a hobbyist. Now I understand better some concepts since I´m able to see them in real time.
Verified Purchase
JAIRO ALBERTO ROJAS BOYACA on
Aug 18, 2018
Recommend to a Friend
Excellent Instrument
5.0
The DS1054Z has been excellent so far in the one month I've had it. The oscilloscope looks great, the keys feel great, it has a nice big display, and the scope reads beautifully. I haven't had any issues. TEquipment was great with shipping and providing the necessary information.
Verified Purchase
Michael Dermksian on
Aug 16, 2018
Recommend to a Friend
As advertised
5.0
Works out of the box. Exactly as advertised. Pre-configured with all the free extras.
Verified Purchase
Michael Lamb on
Aug 14, 2018
Recommend to a Friend
Rigol DS1054Z
5.0
Great 4 channel scope for most hobbyist needs for a reasonable price.
Verified Purchase
Anonymous on
Aug 14, 2018
Recommend to a Friend
FR-301
5.0
Heats fast, recovers fast, sufficient vacuum. Nozzles interchange quickly and easily. The tool is well made and operates simply. A good value
Brett on
Aug 13, 2018
Recommend to a Friend
So Far, Awesome
5.0
So far, this thing is awesome. Granted, it has a lot more features than I'll likely even need, but who knows. This is my first scope, and so far it's been very easy and intuitive to get to know. Setup was easy, and installing the free "upgrades" was no big deal either. I'm looking forward to this making my life a lot easier working on tube amps and other audio equipment.
Verified Purchase
KungFuJosh on
Aug 09, 2018
Recommend to a Friend
Great scope at an affordable price
5.0
Great first time experience ordering from TEquipment - will definitely order again as my test equipment needs grow. This scope is a good addition to my "maker" shop - looking forward to many years of use.
Verified Purchase
Anonymous on
Aug 03, 2018
Recommend to a Friend
Rigol DS1054Z
5.0
In this store this oscilloscope has reasonable cost.The taxes and shipping included, very very great service. My oscilloscope arrived to Mexico at eight days. I will buy with them one more time! I saw many others devices that I would like to buy!
Verified Purchase
Hector Ramos on
Aug 02, 2018
Recommend to a Friend
Solid Power Suppply
4.0
This is a very solid and nice PS. I was a bit surprised how heavy and large it actually is. There is one complain which is the loud fan. There are some mods out there to replace the fan with a quiet one but it's not as straight forward as you might think since you have to make sure to match the current of the original fan and of cause you will void the warranty. So, please Rigol spend $8 for a quiet fan - well the fan of my Rigol DS1052 is even louder ;-). Anyway, I highly recommend to watch the EEVblog reviews on the PS as it gives you a lot of great info.
Verified Purchase
larry104 on
Aug 01, 2018
Recommend to a Friend
Great Company
5.0
This is our second purchase. TEquipment.NET is great to do business with, fast order processing and fast shipment. No problems! Will order from them again.
David on
Jul 27, 2018
Recommend to a Friend
Really nice scope
5.0
For the money you can't get better. Definitely worth it, especially for the hobbyist.
Verified Purchase
Fred Foscalina on
Jul 27, 2018
Recommend to a Friend
Works, but is a little off
4.0
The power supply is nice, but the output is a little off. My channel 1 shows a 9mV difference when measured with a multimeter. Also, the output does not go to zero when i shut the output off. Instead, it goes to some mV value (from 5 to 9). Other than that, it is a fine power supply.
Verified Purchase
Anonymous on
Jul 20, 2018
Recommend to a Friend
Nice Scope
5.0
I recently received my DS1054Z, a solid introductory scope. Affordable, feature packed, compact (compared to the legacy analog beasts I am more familiar with), I expect this to serve well for my purposes.
Verified Purchase
Kevin on
Jul 18, 2018
Recommend to a Friend
Excellent
5.0
Excellent scope for the price.
Verified Purchase
alexandros damianidis on
Jul 14, 2018
Recommend to a Friend
Worth the price
5.0
This is a very usable and affordable scope. The user interface is very intuitive and is easy to pick up, and is for the most part reasonably responsive (not lightning quick, but usable). It does all the basic things I expect in an oscilloscope right, and I would highly recommend it. I have not tried using the PC interface yet or played around much with the serial decode options. Pros: 1. I really like the deep memory and 4 channels. For what I do this is more useful than very high bandwidth/sample rate. 2. The UI for basic things is fully functional; fine/coarse resolution adjustments, centering, and cursors. The single set of vertical control knobs took a little adjusting to, but I wouldn't consider this detrimental. This is by far the biggest pro for me. 3. The base seems reasonably solid, and I don't have any issues pushing buttons. 4. While I don't use the advanced features that often, it's nice that they're there for when I do need them. Cons: 1. The math function is main exception to being "reasonably responsive" I've noticed so far. It just takes more time for it to update compared to everything else. 2. I don't know how usable the FFT feature is. It does seem to allow you to use the full memory* or just the on-screen display data, but I have noticed a few quirks: - When I have a really large time base, it doesn't let you use the full memory anymore (seems > 100ms/div is the limit?) - You can't display only the fft; you either get ~2/3 a screen of the fft, or the fft is layered underneath whatever channel on the full screen - You can only have a linear frequency axis - There are some strange limits on the frequency axis scale. It makes probing "low frequency" modes nearly impossible (low as in few kHz). For example, I couldn't even get a nice fft of the built-in 1kHz probe test signal. 3. Boot time is longer than I'm used to, but I've also mostly only played with old DSO's and analog scopes, so perhaps this is something associated with modern feature-full scopes? In any case, it's not too much of a burden since all I have to do is turn it on and leave it on at the start of the day when I want to use it. 4. While adding measurements is super easy, I have not really found any good way to remove them (there's some obscure method by going through the measurements menu). With statistics off the measurements don't take up much screen real estate, but it would be nice if the left menu buttons used for turning measurements on would instead toggle them on/off. I would consider these all minor issues for me since from past experience I very rarely use the math functions, and I have a PC accessible right next to my scope so I can do proper Fourier analysis by exporting the data.
Verified Purchase
Anonymous on
Jul 14, 2018
Recommend to a Friend
Worth the price. Good.
5.0
This scope includes many features, which are very useful. Also, the free software makes it greater, and it worth the price. The four channels with four different colors make it easy to use. Many math operations including an FFT is really nice. Its pretty easy to get the hang of the scope pretty fast. After a one day, I had most of it down, but there are still a few options buried in menus that I seem to keep forgetting where they are and have to look it up. It was a little confusing that photo #5 on this site for the DS1054Z shows the back of the scope with 2 sources, that don't actually come with the DS1054Z, only a higher more expensive model. On that same note, neither Tequipment nor Rigol actually give you a full list of all features for this specific scope or any other, but instead, the features are lumped in with the entire DS1000z series, so that you don't know for sure what you are really getting. There should be a complete list of all features (ie. all of the Math functions) for each scope of this series either on this site of Rigol. If they are all the same then have one list, and at least say what's different about each scope. I also really liked the ability to put the entire screen onto my PC screen and control most of the functions with the included USB and the free software. But, its a little cumbersome getting all the software because of the hoops you have to jump through before you get it all loaded and working, specifically the surprising requirement of IVI, (Interchangeable Virtual Instrumentation), a set of standards for test and measurement instrument drivers. Even though it was all free it was a lot to go through to get it all running. In the end, Fast shipping, and easy to contact both Tequipment and Rigol technical help was a plus. I recommend this product.
Verified Purchase
Gen Xu on
Jul 14, 2018
Recommend to a Friend
Can't be beat for the price
5.0
Works great on everything I have desoldered so far. Excellent heat retention/regeneration. No waiting for reheating for rapid use. The solder filter tank are easily removed for cleaning. I did also buy the nozzle kit but have only used the included 1.0mm nozzle to date.
The Hakko 633-01 stand is recommended versus the little metal "stand" that comes with the unit.
Verified Purchase
Lee Strickland on
Jul 11, 2018
Recommend to a Friend
Good Iron Given the Cost
4.0
I’ve used this iron for a few years now and find it to be a huge improvement over the old 30W radio shack iron. Heats up quickly and is a decent iron for through-hole component soldering. It does struggle a bit on ground planes or speaker terminals (large thermal masses). Overall it represents good value given its low cost.
Verified Purchase
DK on
Jul 10, 2018
Recommend to a Friend
Amazing Power Suppply
5.0
The power supply is very intuitive and easy to operate. I have used it now for a couple of years to test my circuit builds. Putting a limit on the output current (which is easy to set) saved my builds a couple of times. The only critism I have would be the noise from the cooling fan - but this is a minor complaint. Overall I’m pleased with the purchase.
Verified Purchase
DK on
Jul 10, 2018
Recommend to a Friend
Very useful repair tool
5.0
The fastest and easiest way to effectively desolder through hole components without causing damage to the PCB. Even though the tool is not too expensive it comes from a solid name brand and will last for many years.
Jason on
Jul 09, 2018
Recommend to a Friend
our line voltage is 230 , 60 Hz.
5.0
What would I tell Tequipment the I.D. Number of Hakko FR 301 that is 230v ac, 60/50 Hz,which is our line voltage ? Thank you.
Anonymous on
Jul 09, 2018
Recommend to a Friend
Hakko FR-301 Desoldering Tool
5.0
This is one great tool. Remove solder in seconds. Cleaning after use is simple too.
Verified Purchase
Kenneth Jarvis on
Jul 05, 2018
Recommend to a Friend
Hakko
5.0
I love this product Wanted one for years
Verified Purchase
Anonymous on
Jul 04, 2018
Recommend to a Friend
DS1054Z Digitial Scope Review
5.0
Did my research before purchasing. Great value for hobby and work. An amazing tool in a small package. Love the built in features. Yes, the fan could be less noisy as noted by many customers but it does not bother me . Can highly recommend.
Gyula on
Jul 01, 2018
Recommend to a Friend
Good quality, updates worth it. PC so so
5.0
The updates came already pre-install from factory, very good quality for the probes, been testing it in a couple of circuits and works as expected.
The connection for the PC via USB to "setream" the osci is very laggy.
Verified Purchase
JULIAN RAMOS on
Jun 27, 2018
Recommend to a Friend
Excellent quality, a little bit heavy
5.0
Got the PSU yesterday and so far the quality is very good. The PSU is a little bit heavy and bigger respect of what I expected.
Verified Purchase
JULIAN RAMOS on
Jun 27, 2018
Recommend to a Friend
Good value for money
4.0
I am mostly Audio gear and I have been looking for a scope since my old '50s/60s era Tektronic scope failed to fire up. Dave Jones at EEVblog did a good job of reviewing this scope and I must agree for the price it is good value for money.
The day after I bought this scope, I received notice that I had won an equipment auction for 2 more scopes (the notice was delayed otherwise I would not have purchased the Rigol DS1054Z at 50 MHZ)
So now I have a Tektronics TDS420A (200 MHZ) and a LeCroy 9314M (400 MHZ) to compare against. All 3 machines are 4 channel.
Both the Tek and LeCroy came well outfitted with software (they came from the closed Boeing factory I used to work at, Aerospace does not skimp on options :P ) and speed of the machines aside, the make good marks to compare against though both are digital front ends with CRT displays. I am an old fart and I tend to prefer the weight and solid feel of the old gear.
The Rigol was purchased under the bundle program but when I entered the codes to activate the software my finger slipped an I entered the wrong SER# by one number. I contacted Rigol and customer service told me to check the installed options, everything should be turned on. I checked and it already had everything turned on. This was from the factory so is it now standard for everything to be on? IDK but it is nice. The machine appeared to be new in the box and not a return from another customer.
The Rigol menu structure is easy to use and aside from a few odd choices for button names vs what they do, it is pretty natural to use.
The probes seem a bit light but when you consider that the scope is 50 MHZ they are good enough to not need any upgrades right away.
The Rigol does feel light and built to a budget but remember I am used to 20# to 30# machines intended for commercial industrial use in the '90s and cost many thousands of $ at the time, .... so there is that LOL. If I had to go on location for a call, I would pick up the Rigol, it just is a lot easier to take with you.
I am having a hard time adjusting to the digital display and I do prefer the CRT displays of the other units even when you consider they are monochrome VS the color display on the Rigol.
I do miss the auto detect for probes on the Rigol but as long as you remember to set 1 or X10 in the software, it isn't a big deal.
Is the Rigol the Be all, End all perfect machine for everyone? Well no, and no machine at any price is.
I would have given it 4.5 stars but that was not a choice so I gave it 4.
Verified Purchase
Wayne Parris on
Jun 27, 2018
Recommend to a Friend
Powerful, but Complicated Interface hampers beginn
4.0
This is my first foray into a hobbyist oscilloscope, and I purchased the Rigol DS1054Z after seeing many online reviews and videos. A book that recommended the equipment for a hobbyist Electronics Workshop made this the first major purchase for me (after a new digital multimeter) and I was quite excited when it arrived.
My first use was to measure the output of an Arduino Uno that I had programmed to use pulse width modulation to control LED light strips. I had to poke and twist for quite some time to get the display that I wanted and I think my combined time reading and watching usage videos exceeded a semester of college coursework. Well, I'm only partially serious about that, but I'm not sure I know the exact steps that I did to make it work.
Later, a friend came to my workshop to measure a circuit board he had designed and manufactured and neither of us could get this oscilloscope to display what we needed to display. So, our conclusion is it isn't very intuitive on how to use this.
That said, I've been continuing to read and watch videos with tips and techniques and I am making progress. After adding the DG1022Z I now have a way of using a known good signal to set things up and I'm hoping this launching me on my way.
Again, I'm a beginner not an experienced user and what I lack in skill I make up for in interest so I'm sure these two Rigol products will serve me well once I have them figured out.
ZzyzxOh on
Jun 26, 2018
Recommend to a Friend
hakko irons
5.0
Hakko makes the best soldering irons. Tequipment offers great service and prices.
Thanks--
garry
Verified Purchase
GARRY FROCKLAGE on
Jun 25, 2018
Recommend to a Friend
Ds1054z amazing
5.0
I purchased this product based on the in-depth review of Dave Jones at the Eevblog. I've always tinkered around with electronics, repairing, soldering, but never really had the desire until recently to really understand how they function. As a beginner this scope has been a ton of fun to play with and the fact that it comes with all the probes and everything necessary to use it right out of the box is fantastic. I hope that my children have as much fun with this scope as I do right now.
Verified Purchase
Corey Peterson on
Jun 19, 2018
Recommend to a Friend
Wonderful tool
5.0
Title says it all...works much better than my (tired) old desoldering station. Fast and effective, my only complaint is possibly that they should create a more comprehensive kit with a wider selection of nozzles included. If you're even remotely considering the purchase of this, go ahead and do it--you won't regret it.
Verified Purchase
Mike Maiville on
Jun 13, 2018
Recommend to a Friend
Great for the Money
5.0
This is a great hobbyist scope. It's powerful and has a lot of functionality you'd expect from pricier models. Plus, the SW upgradeable features add a lot of useful functionality. (And Tequipment is including them currently as a special offer.) The 50 MHz bandwidth is certainly a limitation for some applications, but probably not worth the bump in price unless you really need it for your application.
Verified Purchase
DougG on
Jun 12, 2018
Recommend to a Friend
Good Value
5.0
Works well, as expected. Quite intuitive to use once you do a scan of the manual and 'get' the approach to the layout of functions and controls.
Paulk on
Jun 11, 2018
Recommend to a Friend
Just buy it
5.0
Cant beat for the money. I have used used expensive Tektronix and Agilent scopes at school and this Rigol has way more features and memory capability. It is also more user friendly.
Verified Purchase
John D on
Jun 05, 2018
Recommend to a Friend
Can't go wrong with the DS1054Z
5.0
This has been a popular model for the last few years and with good reason. A *LOT* of bang for the buck. I sold off my agilent u1620a in favor of the rigol ds1054z. While the agilent was highly portable the screen was abysmal. I'm so much happier with the rigol. The interface is easy to navigate, the screen is bright and clean, and it's very easy to transport around the shop.
Verified Purchase
Stephen Milton on
Jun 04, 2018
Recommend to a Friend
Great product for removing solder
5.0
I am very pleased with the unit. Appears to be build very well and easy to maintain and keep in top condition. I wish I had purchased one of these sooner. It does a great job of removing solder and greatly shortens the repair time.
William on
Jun 01, 2018
Recommend to a Friend
Rare bargain that does its job.
5.0
Wanna troubleshoot $1500 worth of equipment for $350?
This is it. I use mine to check audio equipment, and check power quality on motors and inverters.
Anonymous on
May 31, 2018
Recommend to a Friend
Amazing scope with all unlocked features!
5.0
This scope came with all the optional features unlocked! This added a lot of value to this already low cost feature rich scope. The only drawback is the 50MHz bandwidth and the touchy rotary encoders on the selection knobs, but all the other features like having 4 channels and triggering on protocols like UART and I2C make those things miniscule for the price. You should buy one, now!
Verified Purchase
Lucas Wells on
May 30, 2018
Recommend to a Friend
Great time saver!
5.0
This was my first jump to a specialized desoldering tool, and it has saved a great amount of time. Desoldering through hole is a breeze with this tool. It heats the area quickly and extracts the solder cleanly without clogging.
Verified Purchase
Lucas Wells on
May 30, 2018
Recommend to a Friend
An absolute must-have!
5.0
Works very well. Not sure if this is a significant performance increase over the previous model--I never used an FR-300--but this was money well spent.
Verified Purchase
Mike Maiville on
May 30, 2018
Recommend to a Friend
Functional basic scope with advanced features
5.0
This is a very usable and affordable scope. The user interface is very intuitive and is easy to pick up, and is for the most part reasonably responsive (not lightning quick, but usable). It does all the basic things I expect in an oscilloscope right, and I would highly recommend it.
I have not tried using the PC interface yet or played around much with the serial decode options.
Pros:
1. I really like the deep memory and 4 channels. For what I do this is more useful than very high bandwidth/sample rate.
2. The UI for basic things is fully functional; fine/coarse resolution adjustments, centering, and cursors. The single set of vertical control knobs took a little adjusting to, but I wouldn't consider this detrimental. This is by far the biggest pro for me.
3. The base seems reasonably solid, and I don't have any issues pushing buttons.
4. While I don't use the advanced features that often, it's nice that they're there for when I do need them.
Cons:
1. The math function is main exception to being "reasonably responsive" I've noticed so far. It just takes more time for it to update compared to everything else.
2. I don't know how usable the FFT feature is. It does seem to allow you to use the full memory* or just the on-screen display data, but I have noticed a few quirks:
- When I have a really large time base, it doesn't let you use the full memory anymore (seems > 100ms/div is the limit?)
- You can't display only the fft; you either get ~2/3 a screen of the fft, or the fft is layered underneath whatever channel on the full screen
- You can only have a linear frequency axis
- There are some strange limits on the frequency axis scale. It makes probing "low frequency" modes nearly impossible (low as in few kHz). For example, I couldn't even get a nice fft of the built-in 1kHz probe test signal.
3. Boot time is longer than I'm used to, but I've also mostly only played with old DSO's and analog scopes, so perhaps this is something associated with modern feature-full scopes? In any case, it's not too much of a burden since all I have to do is turn it on and leave it on at the start of the day when I want to use it.
4. While adding measurements is super easy, I have not really found any good way to remove them (there's some obscure method by going through the measurements menu). With statistics off the measurements don't take up much screen real estate, but it would be nice if the left menu buttons used for turning measurements on would instead toggle them on/off.
I would consider these all minor issues for me since from past experience I very rarely use the math functions, and I have a PC accessible right next to my scope so I can do proper Fourier analysis by exporting the data.
Anonymous on
May 28, 2018
Recommend to a Friend
Arduino PWM project success
5.0
I have been trying to get a PWM Arduino project to work for a week. The MOSFET I was using to control an automobile tail light was getting so hot it burned my fingers, in spite of all I read. The day after getting this Scope I was able to see the problem with the MOSFET on voltage. I changed to a different MOSFET and dropped the on voltage down to 400mv and the MOSFET stayed cool as can be. Yea !
Verified Purchase
Vince Herried on
May 26, 2018
Recommend to a Friend
Off to a great start!
5.0
I spent a long time searching for a good starter oscilloscope and I am glad I decided on purchasing the RIGOLDS1054Z. It is intuitive to use and easy to operate. I am equally glad to have purchased it from TEquipment.net because of their great customer service and fair pricing. I would definitely recommend this company to any of my friends!
Joe Veiga on
May 15, 2018
Recommend to a Friend
Can't be beat for the money
5.0
I'm 15 years past my last job as an electrical engineer and I'm introducing my kids to the joys of circuits. Specifically, we're putting together a MIDI instrument using an old organ pedalboard, a Teensy board, and a bunch of optical emitter/sensor pairs.
I needed something that would help troubleshoot the timing issues and the MIDI signal output. The RS232 decoding package on the DS1054Z was just the ticket and it was included in the item price as part of a promotion.
What can I say? For $349, you just can't get the feature set that's available on this unit. Everything seems well put together and fairly intuitive. If you even think you might need an o'scope, buy it.
Verified Purchase
Lee Gibson on
May 09, 2018
Recommend to a Friend
Feature Packed
5.0
The DS1054 is a powerful instrument. The 50 MHz bandwidth is a serious limitation for some folks; a money saver for others. Expanding bandwidth is costly, but there are examples of this type scope for higher bandwidths. There are a lot of features packed in this $350 scope. You can save set-ups on a thumb drive as well as high definition screen shots. A peek at the waveform spectrum can be attained using the resident FFT. It should be noted that sweep frequency has considerable effect on this display. The vertical and horizontal menus provide for a variety of waveform data including pulse width and amplitude etc. There is a self calibrate function and the 4 probes provide frequency calibration for the 10X mode using the scopes cal signal.
Using software downloaded from Rigol’s site you can marry the scope with your laptop (USB) for presentations etc. When operating under Windows 7 the latest version of ultra sigma and ultra scope need to be used. I made the mistake of downloading an earlier version and experienced some difficulty in removing registry remnants of National Instruments features which prevented the scope from being recognized.
In the problems solved category, I experienced input bleed over between inputs as well as mysterious waveform displays. The Tequipment folks offered to return it and also provided a support number at Rigol. So I called Rigol to see if there was a simple solution. The Rigol tech suggested restoring factory defaults using a unique key press during booting. It worked; been flawless since.
youonkyo on
May 09, 2018
Recommend to a Friend
Great Product
5.0
I have used a lot of solder removal tools and this is by far the best for most situations. Greatly speeded repairs. I am using as hobby to repair electronic equipment and radios.
Verified Purchase
WJS on
May 08, 2018
Recommend to a Friend
Spectacular Scope for the money
5.0
Have not made a ton of use of this scope just yet. I went through several exercises, each focusing on an different capabilities of this scope. This got me up to speed with my new toy quickly Also. This gave my new scope a good shakedown run.
I then put the scope to work, on a current project. Just have to say that I am extremely satisfied with this purchase. If your needs are less than what a scope four times the cost provides then you cannot go wrong with purchasing this one. Especially with the bundled extensions thrown in at zero additional cost. Just do it!
Verified Purchase
Richard Nottage on
May 05, 2018
Recommend to a Friend
best bang for the buck
5.0
This scope, with so many features, and the free software makes it hard to pass up at this price. The 4 channels with 4 colors, and 4 probes, is great. Many math operations including an FFT is really nice. Its pretty easy to get the hang of the scope pretty fast. After a one day, I had most of it down, but there are still a few options buried in menus that I seem to keep forgetting where they are and have to look it up.
It was a little confusing that photo #5 on this site for the DS1054Z shows the back of the scope with 2 sources, that don't actually come with the DS1054Z, only a higher more expensive model. On that same note, neither Tequipment nor Rigol actually give you a full list of all features for this specific scope, but instead, the features are lumped in with the entire DS1000z series, so that you don't know for sure what you are really getting. There should be a complete list of all features (ie. all of the Math functions) for each scope of this series either on this site of Rigol. If they are all the same then have one list and at least say what's different about each scope.
Another surprising thing is that while waiting for my shipment to arrive, I was reading the manual, and noticed that DS1054Z is only rated as a CAT I device, which theoretically seems to greatly limit its usability.
I also really liked the ability to put the entire screen onto my PC screen and control most of the functions with the included USB and the free software. But, its a little cumbersome getting all the software because of the hoops you have to jump through before you get it all loaded and working, specifically the surprising requirement of IVI, Interchangeable Virtual Instrumentation, a set of standards for test and measurement instrument drivers. Even though it was all free it was a lot to go through to get it all running.
In the end, Fast shipping, and easy to contact both Tequipment and Rigol technical help was a plus. I recommend this product.
Verified Purchase
bruce bergenfeld on
May 03, 2018
Recommend to a Friend
I would definitely buy from them again.
5.0
I really felt at home doing business with TEquipment. The first thing I noticed is that they are easy to contact for questions about purchases. They answered the phone quickly (2 times!) and were both knowledgeable and helpful about my concerns. It also made me feel comfortable knowing they are a real brick and mortar business located in the great USA. Their prices are competitive if not the best, offering free shipping many times and no tax for those out of state. What else could I ask for besides maybe my pipe and slippers.
Verified Purchase
Michael Hanzy on
May 03, 2018
Recommend to a Friend
Quick and Easy
4.0
This scope, with so many features, and the free software makes it hard to pass up at this price. The 4 channels with 4 colors, and 4 probes, is great. Many math operations including an FFT is really nice. Its pretty easy to get the hang of the scope pretty fast. After a one day, I had most of it down, but there are still a few options buried in menus that I seem to keep forgetting where they are and have to look it up.
It was a little confusing that photo #5 on this site for the DS1054Z shows the back of the scope with 2 sources, that don't actually come with the DS1054Z, only a higher more expensive model. On that same note, neither Tequipment nor Rigol actually give you a full list of all features for this specific scope or any other, but instead, the features are lumped in with the entire DS1000z series, so that you don't know for sure what you are really getting. There should be a complete list of all features (ie. all of the Math functions) for each scope of this series either on this site of Rigol. If they are all the same then have one list, and at least say what's different about each scope.
I also really liked the ability to put the entire screen onto my PC screen and control most of the functions with the included USB and the free software. But, its a little cumbersome getting all the software because of the hoops you have to jump through before you get it all loaded and working, specifically the surprising requirement of IVI, (Interchangeable Virtual Instrumentation), a set of standards for test and measurement instrument drivers. Even though it was all free it was a lot to go through to get it all running.
In the end, Fast shipping, and easy to contact both Tequipment and Rigol technical help was a plus. I recommend this product.
Verified Purchase
bruce on
Apr 29, 2018
Recommend to a Friend
Great value for a great scope
5.0
I purchased this scope based on the recommendation of a friend. I am awestruck by the value packed into this scope. Take your time and study the menu structure. It's a bit awkward at first but once you get it's logic you'll find it easy to use.
Verified Purchase
Jim Young on
Apr 24, 2018
Recommend to a Friend
High value oscilloscope
5.0
The DS1054Z with the upgrade software is a very versatile and easy to operate oscilloscope. In addition to the great product the technical and customer support from Rigol and Tequipment was outstanding. Highly recommend A .
I used the scope to set up my phono cartridge.
Verified Purchase
Audiophile on
Apr 24, 2018
Recommend to a Friend
It's the most popular for a reason
5.0
As much as I love the aesthetics of my old 7000 series Tek scope, the thing really is a boat anchor. I needed something made in this century. In many ways, a scope is a scope. All the basics are the same whether it's fiddly analog knobs and switches, or digital menus. There's very little I can do on the 1054 that I couldn't do on my 40 year old behemoth, but the modern technology makes it all approximately 1.00x10^6 times easier.
Calling this a hobbyist unit just doesn't do it justice.
Verified Purchase
Evan Marshall on
Apr 23, 2018
Recommend to a Friend
Rigol DP832
5.0
Rigol DP832, Talked to sales, discussed different options and ordered the DP832. Received after about three days. Downloaded instruction manual from Rigol website. Unit performs as described and appears to be well constructed. At this time unit works well with no problems.
Verified Purchase
Elton Ray on
Apr 18, 2018
Recommend to a Friend
Great tool, great value
5.0
I was dreading a large through-hole desoldering project (dozens of 4-legged switches to remove) because I don't get a lot of time to work on my hobby. I purchased the FR-301 after I heard that it was an improvement on the FR-300, which I was on the fence about purchasing because of some less-than-stellar reviews.
This is a fabulous tool for getting a lot done in a short amount of time. A good analogy is that your manual vacuum pump and solder wick are a cordless drill and your task is to remove all the deck screws from a deck. This desoldering tool is like an impact driver. Zip, zip, zip and you're done.
Highly recommended if you're more than a casual hobbyist.
Verified Purchase
Brooklyn David on
Apr 16, 2018
Recommend to a Friend
RIGOL DS1054Z
5.0
This is a great buy for the money. It is an even better buy if you get it with the free software bundle.
There are so many features to this scope that it may take me a week to find them all.
Having owned and operated oscilloscopes for the last 49 years, I wanted something that would not break the bank, yet give me plenty features.
Sometimes you just want to share a waveform that you have captured. This scope allows connectivity to a PC via Ethernet, USB or even to a USB drive.
Yes there are limitations to this scope but for this price point, you won't get any complaints from me.
Bruce Holmen on
Apr 14, 2018
Recommend to a Friend
Excellent scope
5.0
This is a very nice scope for the money. The controls are easy to figure out, the screen is amazing, and the quality is great. I highly recommend!
Verified Purchase
Anthony on
Apr 13, 2018
Recommend to a Friend
Good beginner scope
5.0
Very happy so far with this scope as a beginner. So far it has been very easy to learn and use.
Was already a great value but even better with the included software options. The extra memory and serial bus decoding in particular are useful to me.
No complaints at this point, but will update the review in the future if I come across any issues.
Verified Purchase
Craig on
Apr 10, 2018
Recommend to a Friend
Excellent Value
5.0
Great scope, and at this cost who can say no? I dithered for several months. The only real downside I saw in the reviews was the menu structured layout. Well the layout is not a problem for me. Once one learns where the function you want are it becomes second nature. I have only had the scope a couple days and it rocks. Free ground shipping took about 5 days but it was packed good and suffered no damage. TEquipment was trouble free, I got email status updates with tracking info. I got the extended memory and additional functions good guy deal so I’m extra happy.
Verified Purchase
Kaz on
Apr 07, 2018
Recommend to a Friend
Rigol Digital Scope
5.0
I recently retired from an aerospace communications career and I'm able to now spend more time with my hobby as a HAM. One of the things I missed was the 4 channel scope I used at work and wished I had one myself. I noticed in a lot of YouTube videos posted by HAMS that a Rigol oscilloscope was on their bench. I decided to try the DS1054Z. The price and included software seemed too good to be true but it wasn't. Tequipment provided easy ordering and fast shipping. The online chat quickly answered my questions about what shipped with the unit and shipping was fast and free.
The DS1054Z is built as beautiful and sturdy as the scopes I used at work that cost thousands more. There are so many features that it will be a while before I get to use them all but my initial check out is more than living up to my expectations. Customer support from TEquipment and Rigol is as easy as a phone call and no long holding queues to get to a support technician. Happy is just the start of my satisfaction with the Rigol DS1054. Try it, you love it.
Verified Purchase
Jay on
Apr 06, 2018
Recommend to a Friend
excellent delivery and product
5.0
I received my scope with prompted tracking and delivery. The product arrived, seemingly undamaged. I checked out the unit and seems to be working fine so far. Quality of the scope seems quite good and am very happy with it. Like others, I strongly recommend this company for your next purchase of such special and sensitive equipment. My next purchase will undoubtedly be a more expensive scope (since this is considered an entry level scope) and would like the same service and care I received with this one.
Verified Purchase
Phillip Aguilar on
Apr 03, 2018
Recommend to a Friend
Rigol DS1054Z
5.0
It is my first oscilloscope, I received it three days ago, it arrived in perfect condition, it meets the three requirements of an amateur electronics and arduino, good, beautiful and economical. For what little I could prove is an excellent product and is fulfilling my expextatives. With respect to the staff of Tequipament, excellent attention at all times. Thank you very much for your attention. 100% recommended.
Adrian Francesquini on
Mar 30, 2018
Recommend to a Friend
great value
5.0
I'm a beginning hobbyist and was looking for an entry level oscilloscope. All of the reviews I've read and youtube videos I've seen recommended this scope highly. It performs as advertised, and the free keys for the extra features in the current promotion worked without a hitch. The only minor complaint is that the manual is pretty sparse. You won't learn how to use an oscilloscope with this manual, but there are plenty of other resources online for this.
Verified Purchase
rpmilius on
Mar 27, 2018
Recommend to a Friend
DS1054Z
5.0
This scope is more than I expected. For the price it has so many features and the test probes were included. Grate deal for the Amateur and the Professional.
Bill on
Mar 26, 2018
Recommend to a Friend
Excellent starter oscilloscope
5.0
Nice, solidly built piece of equipment. Display is nice and bright. User interface is fairly intuitive after you have used it a few times, but can be intimidating initially due to the vast array of features. Has tons of features for a scope in its price range. TEquipment offering a free upgrade to unlock additional features is an added bonus.
Verified Purchase
Anonymous on
Mar 24, 2018
Recommend to a Friend
Great upgrade to my dying Weller WES50
5.0
A great upgrade to my dying Weller WES50. The temperature read-out is helpful - especially when soldering larger parts which drain heat.
It's a bit more compact than my well-used, WES 50, and work space on the bench top is always at a premium.
I initially purchased the WES51 (the WES 50's replacement), but the blinking LED status was confusing and when the Weller rep said the behavior was normal, I returned it. An LED that's off when temperature is reached is an absurd convention, IMHO.
Temperature setting controls are a bit non-intuitive (with only two buttons), but I'm sure this will become second-nature after a bit of use.
Initially, I can't figure out how to get the 5 presets to work (when following the instructions) but direct setting of the temperature is easy and I tend to only adjust temperature by the job (i.e. a work session on a circuit board vs. a hard-wiring job). Usually, this involves a tip change as well.
The iron holder is compact, although I wish it had storage "holes" for alternate tips.
Verified Purchase
Thom Mackris on
Mar 24, 2018
Recommend to a Friend
Excellent value oscilliscope for hobby use
5.0
Previously I have used a second hand older analog oscilloscope. I was a bit unsure if I should pull the trigger on this as even at ~ $350 it is a fair bit of money, but I am quite happy I did. This oscilloscope is by far the best value for the money on the market to date (March 2018) and the software options are also great. I can't believe how much a difference this new scope makes, whereas the old scope was something I would dread getting out (it is really big, old and clunky) this is a breeze to use.
Verified Purchase
Anonymous on
Mar 23, 2018
Recommend to a Friend
DS1054Z
5.0
Great scope with a ton of features. The best bang for the buck! The 4 channels makes designing circuits a whiz! I would buy again.
Verified Purchase
john mott on
Mar 22, 2018
Recommend to a Friend
Nice supply, does the job well
4.0
Nice supply for the price. Wish it handled more current, but overall a good device. We use many of them in the lab
Verified Purchase
Cliff M on
Mar 22, 2018
Recommend to a Friend
Nice for my needs.
5.0
I'm a Ham Radio operator and like tinkering with radios. I figure this would a good investment for me as I near retirement.
Nice Item Great price. Thanks
Verified Purchase
Mike Rothe on
Mar 22, 2018
Recommend to a Friend
Simply Great Power Supply for the money
5.0
This power supply runs circles around every low voltage power supply I've used at work, and we have a lot of different models. The Rigol has intuitive controls, informative display, and features that multiply the value of the supply for the reasonable price. I am telling those I work with that we could save a lot of time with this supply.
Verified Purchase
Jeff Roach on
Mar 20, 2018
Recommend to a Friend
HAKKO Quality
5.0
I am very pleased with the FX888D. When it comes to a soldering station, I look for good temperature regulation and a good selection of tips; browsing through the offering by TEquipment will show you just what's available. At 65W, this is capable of soldering larger lugs and heavy gauge wire, while still handling 0603 resistors just fine. Hands down, this is my favorite soldering station. I'm glad to now have one on my own workbench!
Verified Purchase
Prof_F on
Mar 20, 2018
Recommend to a Friend
The Oscilloscope you alwaysWanted
5.0
For the student and hobbyist and technician ,this is the best 4-channel scope that is very affordable. If you wanted your own scope but would not settle for a limited bargain tool because of price, the wait is so over! Dare to compare to any scope with this many features. I haven't used a scope in years but learned to use so many functions in just a few hours because the soft button menus are intuitively easy to navigate. Buy this now to take advantage of the free factory software unlocking upgrade key too. An amazing value added bonus but for a limited time.
Mike VRLA on
Mar 18, 2018
Recommend to a Friend
Love this thing
5.0
I've seen nothing but good reviews online. And with the free added software, it was a no brainer!! I bought a isolation transformer for troubleshooting AC power supplies, This scope is going to save me hours of troubleshooting time.
Verified Purchase
Scott Nacke on
Mar 16, 2018
Recommend to a Friend
Starting point of view
4.0
Just started to work with the 1054Z so this is correct to that point of view.
Pros:
1) Great package.
2) Feels solid and less "made in china"
3) Great flexible probs.
4) Adding/Modify the packages is really easy and takes few min.
Cons:
1) The fan noise is horrible.
Verified Purchase
Tomer Granit on
Mar 14, 2018
Recommend to a Friend
Wow this thing is great
5.0
This scope has more features than I will probably need but I will have a great time trying to use most of them. I am glad that it came so highly recommended and bought it.
Verified Purchase
William Mackey on
Mar 11, 2018
Recommend to a Friend
Nice Nice Nice
5.0
This is a great piece of equipment for the money. I already have a 100MHz Picoscope 3205D MSO, but there are times when you need more than 2 analog channels, and situations where it is useful to have a standalone scope. So, with some reservations about spending money I didn't necessarily need to spend, I went ahead and bought the DS1054Z.
I've been using it for about a week and I am really happy with it. Once in a while I have to go to the manual, but for the most part I don't. All of the commonly used channel, time base and trigger functions you find on higher-end Agilent scopes are easy to find and generally work as expected. Likewise for using cursors, taking measurements, saving screen images, and using the convenient rows of context-dependent buttons on each side of the screen.
I have not yet used the serial decode options. The assortment is limited and they aren't really why I bought the scope, but they are nice to have and will probably come in handy at some point. I also haven't made much use of the remote control interface, but I saw and verified that with the scope connected to LAN you can save a screen image with a single linux shell command:
echo ":DISPLAY:DATA? ON,OFF,PNG" | nc -w1 192.168.1.185 5555 | dd bs=1 skip=11 of=image.png
Thanks to RoGeorge's blog for this, it's a slick and convenient alternative to monkeying around with a flash drive. The DS1054Z user interface for creating and editing text strings is tedious, you'll experience this entering a license code for any options you get for the scope.
At this point the DS1054Z seems to be a real bargain at the price. I feel like I'm using a much more expensive piece of test equipment, it looks and feels well made and I enjoy working with it. I'm definitely glad I made the purchase decision.
Matthew Barr on
Mar 10, 2018
Recommend to a Friend
Hard to do better at this price
5.0
I have the Rigol 2072 which is an excellent scope, but often felt frustrated at having only 2 channels. When this went on sell with decoders, memory and bandwidth upgrade, I jumped on it!
As others have notes, the front end is a little noisy, and the probes are a bit cheap (I've bought used tek probes on ebay when my old ones broke)
The decoding functions are a bit clunky, but much better than the open source logic analyzers I've used, and quite usable enough to help me debug an i2c problem on a recent project. They probalby won't help you reverse engineer a protocol, but they will tell you enough to make sure you have it working with proper pullups etc.
Verified Purchase
Kevin Osborn on
Mar 07, 2018
Recommend to a Friend
Too good a deal to pass up!
5.0
A great price on a great scope. Especially with the upgrades thrown in., This scope was big bucks when it came out. Likely it is near the end of the run and the model will be superseded soon? At any rate, for the price of a high-end DVM you can buy a good, well touted, DSO.
Verified Purchase
Anton Malje on
Mar 05, 2018
Recommend to a Friend
Go-to soldering station for the working tech
5.0
I've had quite a few solder stations/irons in my 20 years as a tech, the Hakko is by far my favorite. Heats quickly, maintains it well, and having 5 presets means it's easy to switch temps as needed. Stop shopping, just buy it!
backstage tech on
Mar 05, 2018
Recommend to a Friend
Amazing scope for the money
5.0
This is my first scope and after watching a few youtube videos I was up and running in no time. The scope came with a key to enable all features (except for 100MHz) and I was debugging i2c a few hours after I plugged it in.
It has so many features and it will require time to master this excellent scope. The fan is a little noisy but it is not that bad. The quality of the scope looks very good. I'm running on a Mac and so far the software that I found on Rigol is for Windows. I will keep looking to see if I can control the scope from the computer.
Highly recommended!!
Verified Purchase
Gaston Dombiak on
Mar 03, 2018
Recommend to a Friend
Excellent entry level device
5.0
Great scope for the price, perfect for home tinkering. Tequipment hooked it up with the software options. Very satisfied with both manufacturer and retailer
Rich Fontaine on
Mar 02, 2018
Recommend to a Friend
Excellent starter oscilloscope
5.0
The ubiquity of the Rigol DS1054Z in the hobby market is unsurpassed. For the price point with the included features, it is hard to beat in 2018. While the rigol interface takes some getting used to, both Tequipments service and the rigol ds1054z are worth investing in.
Verified Purchase
Jason Ledbetter on
Feb 27, 2018
Recommend to a Friend
Great Scope for The Money
5.0
The DS1054Z is the go-to standard scope for hobbyists for a reason. Lots of features, 4-channels, easily upgradable. It's a wonderful entry level piece of equipment.
Verified Purchase
Anonymous on
Feb 26, 2018
Recommend to a Friend
Such good value for money!
5.0
This scope is incredibly good value for money, especially with the free software upgrade promotion. The interface is slightly slow but the performance is otherwise great and the unit seems well built.
I use Agilent scopes at work and those top dollar models are missing features that I love on my Rigol.
Unbeatable for the price - recommended!
Verified Purchase
Michael on
Feb 25, 2018
Recommend to a Friend
A Great Value
5.0
An incredible value. Compact, light and well built. An ideal take it with you scope. The bonus serial decode package adds a lot of functionality.
Verified Purchase
Dave Dillabough on
Feb 24, 2018
Recommend to a Friend
Great product
5.0
I am new to oscilloscopes but read a lot of reviews before choosing this one. So far I am enjoying using this scope and very happy with my purchase and will be learning how to use more of its features as time goes on.
Anonymous on
Feb 23, 2018
Recommend to a Friend
Perfect Replacement
5.0
This replaces and old scope that I built from a kit purchased from Heathkit many years back. This is a light years jump from what I was using. Only wish I had opted for the MSO version with the 16 digital channel capability. I will have to continue my current PC base 8 channel digital until I'm ready to upgrade again. Will definitely look at the MSO version then.
Verified Purchase
Anonymous on
Feb 22, 2018
Recommend to a Friend
Perfect Power Supply for what I need
5.0
Just getting into electronics as a hobby on a more serious scale. Been tinkering for years, but finally ready to get serious. This benchtop power supply has the functions I've been looking for.
Verified Purchase
Richard Robertson on
Feb 22, 2018
Recommend to a Friend
A joy to work with!
5.0
I've been using R**io Sh*ck irons forever. I had an important project coming up and a friend of mine told me how much he loved his Hakko. I decided it was finally time to get a good soldering station and ordered this one. Wow! This thing heats up almost instantly and my soldering work was done so quickly I couldn't believe it. Now I'm looking for other stuff that needs to be fixed!
JSantus on
Feb 20, 2018
Recommend to a Friend
Great Lab Power Supply
5.0
Great power supply. I’m upgrading from a hobby power supply to the DP 832 and I’m amazed with this units percussion and ease of use. It’s well constructed and it has a Intuitive user interface. The price is unbeatable for the features and quality it offers. Make sure you contact TEqupiments customer support. They offered me a modest discount to help meet my budget. Much appreciated! You won’t be disappointed when choosing this supply.
Constantparabola on
Feb 09, 2018
Recommend to a Friend
Awesome Scope!
5.0
My order shipped promptly, Love that they allow you to try it and return if needed, but I’ll definitely be keeping this baby. Beautiful scope and screen, excellent for the price!
Verified Purchase
William Keller on
Feb 01, 2018
Recommend to a Friend
The Rigol DS1054Z is perfect for the student
5.0
I bought the Rigol DS1054Z about a month ago. Before that I was using a very good analogue unit. Wow, what an upgrade this has been!
At first I thought it was going to be hard to use, but I found the basic instruction manual is very well written and the controls very intuitive.
It took me about 30 minutes to be comfortable using it as my first digital oscilloscope. Most of this time was forcing myself to read the instructions rather than just jump in and try to figure it out by myself.
I have had a chance to test the unit with various projects that I am learning as a student doing an electronics course at a technical institution. I have found this unit much easier to use than my home scope and ones in the classroom.
It is packed full of features. I love the comprehensive measurement data which compares channels. The display is very crisp and it just looks nice :)
I did quite a bit of research before I got this and found this unit by far the best value for money in the lower-end scope price range.
Very happy :)
Raphael Miller on
Feb 01, 2018
Recommend to a Friend
Rigol DS1054Z Digial Oscilloscope
5.0
It has been many years since I have bought an oscilloscope. My last purchase was a Tektronix 2024B which, if memory serves me, I bought for $4k (yes, it was that long ago!). It's a very nice scope.
Fast forward to Jan 2018 and I was in the market for an additional scope. I did quite a bit of research and checked out many reviews. The Rigol DS1054Z rose to the top in that review process. And so I ordered one for a very competitive $349, with free shipping and $750 of software accessories/upgrades,
Boy, the Rigol DS1054Z did not disappoint. What a great scope, especially for the price. If you are in the market for a full featured and capable scope at a great price, look no further than the Rigol DS1054Z. Highly recommended.
Verified Purchase
Andrew Sheppard on
Jan 31, 2018
Recommend to a Friend
Great scope for the money
5.0
Great scope and great dealing with Tequipment.
Verified Purchase
Bob Gibson on
Jan 30, 2018
Recommend to a Friend
Great Scope
5.0
As an aging guy who used to do more with electronics in his youth, I needed a new scope for various things including digital and this scope provides. The added bonus features/software were great and was promptly delivered on-time and unscathed. Love my first scope in many decades!
Verified Purchase
Richard Berg on
Jan 30, 2018
Recommend to a Friend
Great scope for the money
5.0
I don't think you can beat this scope for the money. It has many of the advanced features and if you don't need the additional bandwidth or sampling rates, it is a great scope to have. Good as a portable scope or as a bench backup.
Verified Purchase
Dan on
Jan 28, 2018
Recommend to a Friend
Lots of Bang for the Buck
5.0
I am amazed how much one gets with this scope. I am replacing an excellent Tektronix 475. I like the accuracy of the frequency counter, accurate values of level and time with a cursor. It has measurement values featured I am not aware of. I do wish dB would be one of those front line values shown. That could be fixed with a software upgrade. Yes, I did work with the Math and Measurement function and saw dB, but it not like being there as a choice with other main values. Fluke meters can express dB levels. The probe tips are brittle, I lost a tip by bumping the probes. The excellent support of Tequipment said they are sending a replacement. That is excellent support. I haven't received it yet, but several follow ups indicated they have not forgotten me.
I hope Rigol can offer a dB reference value, easier than the doing the Math and Measurement.
I give it 5 stars, it is such a great deal!
David Messing on
Jan 26, 2018
Recommend to a Friend
HAKKO FX888D-23BY
5.0
very well designed , and built , heats up real fast , this unit is great for the shop and hobby user ,extremely high quality at a great price
RON on
Jan 25, 2018
Recommend to a Friend
Wow! Great Scope!
5.0
LOADED with features! Very impressed! I've worked with scopes 10x the price that didn't do all this!
Verified Purchase
Bradley Goodman on
Jan 24, 2018
Recommend to a Friend
Works great for the short time I’ve used it.
5.0
This looks and feels like a very high quality product. Nicely painted metal housing, great feel in your hand, and they even used highly flexible silicone insulated wire for the iron. It heats up in a flash, and holds the temperature brilliantly. Highly recommend, though I haven’t used it very long.
Chad on
Jan 23, 2018
Recommend to a Friend
fantastic investment for the electronics hobbyist
5.0
There are certain milestones that, looking back, the hobbyist recognizes as huge leaps in their understanding and capability.
Buying and using a digital storage oscilloscope turned out to be one of those times for me.
There are so may ways in which a circuit can malfunction, appearing inert. The diligent, clever technician can probably work through these, given time and some basic tools. For the hobbyist with limited time, such a situation can prove a major roadblock.
A scope like this provides unprecedented insight into the workings (or failings) of the circuit, often reducing troubleshooting from hours to minutes. My only regret is in not having prioritized investment in an instrument like this years ago.
issac on
Jan 21, 2018
Recommend to a Friend
Great scope but Tequipment logistics screwed up.
4.0
My Tequipment shopping experience was sub-optimal, so I have to ding the product to air my concern with the agent. First off, great scope!!! I can't fault it at all and the deal from Tequipment was excellent also. My issue was delivery. I asked for a single shipment (I ordered several items at once) to minimize fees at my receiver since they charge me per package received. Tequipment ignored my request and shipped each item as it became available. Added $40 extra to my purchase. I was not happy. Contacted Tequipment and they offered a discount on my next order but I really would have preferred they followed my shipping instructions first time.
Robert on
Jan 20, 2018
Recommend to a Friend
Great scope for the money!
5.0
Shipped quickly with great packaging. The free expansion upgrades were a big plus. Scope seems to preform as expected and shows a high degree of accuracy when compared against some none reference standards. A lot of capability for the money.
Verified Purchase
Clarence Canterbury on
Jan 18, 2018
Recommend to a Friend
Absolutely terrific scope value for the money
5.0
I had ordered a competitor's 2ch higher bandwidth scope since that one had serial decoding included in the price. It was a nice scope but locked up hard two times over two days, one time while just sitting on the bench not really doing anything.
So I returned that one, and as I was getting ready to reorder I found out that Rigol was doing the bundle special to turn on nearly all the features in the DS1054Z. So even with only 50 MHz bandwidth that was too good a deal to pass by for a 4 Ch scope.
After a brief learning curve I can say this scope is great. It already saved me a great deal of time on an embedded system project I've been contracted to work on. The SPI decoding, even though it is only software based, works great.
Some people have complained about the multi-function knob being too sensitive. I have not found that to be the case, once in a while I may over or under shoot but that is rare.
So far the only negative, and it is pretty minor, is that the fan is a little bit noisy, Not excessively, but it is noisier than the competitor's model I had ordered orginially.
But a piece of test gear is only as good as the support behind it.
Tequipment is great, and they got me the free bundle upgrade very quickly, even though the Amazon e-mail system made it challenging to get them my direct e-mail address so the license details could be sent to me.
And I had a couple of learning curve related issues that I contacted Rigol support about and they were also very responsive and very helpful.
I would certainly purchase another Rigol product in the future if needed, and would purchase again from Tequipment for sure.
Burton Bicksler on
Jan 16, 2018
Recommend to a Friend
A great buy
5.0
This scope is one of the best scopes for the money. Rigol makes quality products. This is my third piece of Rigol equipment. I am very satisfied with all of the product by them that I own. This scope is one of the most popular entry level scopes for the hobbyist and professional alike.
Verified Purchase
WilliamL on
Jan 12, 2018
Recommend to a Friend
FX888D-23BY
5.0
Great soldering iron and easy to use! It would nice if it had a auto shutoff after 30 minutes for inactivity. For the price it's a great buy.
Verified Purchase
SGW Dave on
Jan 12, 2018
Recommend to a Friend
Great value and great customer service
5.0
This is a great scope for the money. One of the probes that shipped with the scope exhibited some unusual noise / signal dropout when moving the witch hat and TEquipment / Rigol were great with their customer service. In this case TEquipment provided contact info for Rigol for diagnosis, and Rigol promptly shipped a replacement probe.
Verified Purchase
Michael Fikes on
Jan 12, 2018
Recommend to a Friend
Great entry levelscope with lots of online support
5.0
EEV Blog recommended this scope and I am very happy with it. There are lots of Youtube users running this scope so it is really helpful for learning if it is your first digital scope.
Verified Purchase
Justin Kuntz on
Jan 10, 2018
Recommend to a Friend
GREAT scope
5.0
I bought this for a Christmas present for myself, so I did not get to review it until I opened it. However I was extremely impressed with what it can do. At this point I have only got to play for a short time, but it does more than I know how to do, and is going to take some time to learn it.
The feel of all the buttons are great, I was worried that beings this is a less expensive unit, it they would have skimped on the controls, however they feel like buttons used to feel before everything went cheap.
Cant wait to start using in more. My father also bought one, after I found this one on sale, he was going with a different brand, but after he got his, he is glad I found this unit, as he is extremely happy with his.
Verified Purchase
Jerry Shepherd on
Jan 07, 2018
Recommend to a Friend
Review
5.0
It is a very high quality oscilloscope for the price.
Verified Purchase
Anonymous on
Jan 07, 2018
Recommend to a Friend
Mechanical Engineer
5.0
Great Oscilloscope, I purchased this oscilloscope for analysis of ignition waveforms and various arduino projects, this thing works great. For a four channel digital oscilloscope, this is well worth the money. When you look at performance vs cost this scope is hard to beat.
It was easy to learn how to use this scope, has good resolution, it also comes with four leads. I would highly recommend this scope to anyone looking for a beginner scope.
Bernard M. on
Jan 07, 2018
Recommend to a Friend
Satisfied customer
5.0
I'm very pleased receiving this item promptly and in good condition.
This best selling instrument, works well. I admit that I have five other oscilloscopes, from bottom of the line to the top [25 years old] Tektronic and other scopes) but for general purpose, and portable units, this is hard to beat. I also use this for my electronic presentations.
dmattila on
Jan 06, 2018
Recommend to a Friend
ds1054z
5.0
Great 4 channel scope. Compact, light, feature rich!
Verified Purchase
Jim Leftwich on
Jan 06, 2018
Recommend to a Friend
Worth the money
5.0
It's hard to find a scope this capable for this amount of money. The added free software functions are also a bonus.
The buttons respond nice and the color and intensity of the display is good. My only real concerns are some of the cursor and measurement functions are difficult to navigate through the onscreen commands and the lack of the automatic probe compensation pads surrounding the BNC connectors. The latter isn't much of an issue though if you just use the probes that come with it.
I highly reccommend picking one up if you're a beginner or hobbyist, the price is hard to beat
MicroDave on
Jan 05, 2018
Recommend to a Friend
Good scope for the price
5.0
The price was very good and the shipping was fast. Although most people get this scope to hack it, this was an even better deal with the bundled upgrades for the scope, legitimately.
I use this mainly for audio frequency work and spi debugging. I'm satisfied with the performance considering the price.
Kanurys on
Jan 05, 2018
Recommend to a Friend
Awesome Scope!
5.0
I recommend this product to anyone that needs a decent product. I have been pleasantly surprised with the build quality, look and feel of this oscilloscope that does everything I needed and much more. The display has a beautiful phosphor look-and-feel with an adjustable persistence that is sharp and clean. This is the best product I have purchased and for the price it is an exceptional scope. I have played with other scopes in the same class and Rigol has cornered the market with build quality, options and user interface that is easy to use. Without hesitation, I would purchase the Rigol DS1054z again.
John Wilson on
Jan 04, 2018
Recommend to a Friend
Perfect scope for my needs
5.0
I am in love with this scope. It has all the features that I need for working with digital and analog circuitry. I am still an avid TTL and CMOS user along with working with PI's, Arduinos, and other circuitry. With the four inputs and math functions built into this scope, it has proven itself such a useful tool that I wouldn't know what I would have done without it. Grade A design, and very portable for my needs. Thank you for the suggestion, and I am pleased with the results.
Verified Purchase
Christopher Hicks on
Jan 03, 2018
Recommend to a Friend
Great devoce
5.0
I have been in business since 1973 and have bought many scopes over the years but, regardless of price, this was the best all around unit. The only additional feature that one device that I have is a higher bandwidth but this seldom required. I use it so much that I have bought a second DS1054Z so I can have one for development and another for the service bench.
Gene on
Jan 01, 2018
Recommend to a Friend
everything you have heard is true
5.0
Amazing value! Hard to find anything to criticize and easy to upgrade. Don’t hesitate any longer.
Verified Purchase
Paul Mathews on
Dec 29, 2017
Recommend to a Friend
Exelente Cost Benefit Ratio
5.0
The Rigol DS1054z (04 channels) oscilloscope was an excellent purchase, with great cost-benefit ratio. It is possible to say that I researched a lot and did not find anything better for the price, I did not find anything with so many possibilities of upgrades, connectivity and so on.
The decisive point for my purchase was when the price dropped to $349 with a promotion where some licenses to upgrade the equipment were given for free.
I'm a detail oriented person. The equipment is not perfect. Looking for finishing problems may be possible to find small flaws, however, nothing to bother with. It is a good product for the price.
Anyway, for now, the equipment is worth 5 stars. I need to use it more to be able to do more considerations. For now, I would buy it again.
Verified Purchase
Anonymous on
Dec 28, 2017
Recommend to a Friend
Hakko FX888D
5.0
Soldered iPad Air 2 charging port with Hakko FX888D. I had to use small and flat tips for the micro-soldering.
My complete order was delivered on time by TEquipment.net. I would recommend this site.
Verified Purchase
Kiran Thapa on
Dec 22, 2017
Recommend to a Friend
Excellent value, does everything it should
4.0
Very good utility, great feature set (particularly as the official full-option trigger/decode/memory bundle was included free). Controls could be a bit quicker/more responsive, some menu items more straightforward, screen text bigger; but overall a very quick learning curve and everything seems to work.
My "50 MHz" DS1054Z arrived with 3.8 ns rise time (10-90%) and 98 MHz -3dB bandwidth on all four channels, at 100mV/division. It is evidently rated conservatively. YMMV...
Verified Purchase
Zike on
Dec 20, 2017
Recommend to a Friend
You get more than what you pay for
5.0
I bought this scope during a sale for $350. For that price I got 4 channels, a nice big screen, a bunch of decoders and so much more. Even though I've spent most of my time playing around with it's fancier features I keep finding new things that this scope is capable of doing for me. It's a great tool, it has a nice build quality to it and the tooling is great. It's a bargain for $350 and it's reputation as the "most popular oscilloscope" is well deserved. Recommended for hobbyists and professionals alike.
Verified Purchase
David Díaz on
Dec 20, 2017
Recommend to a Friend
Great scope! Awesome software bundle for free.
5.0
I love the new scope. While I wont go into the performance details, the newest firmware seems to slightly improve FFT. EEVblog was harsh on this, but for the price, I don't really care. Buying from Tequipment meant that I got almost all of the software upgrades bundled for free! I'm glad I skipped ordering from amazon!
Verified Purchase
Joe S on
Dec 18, 2017
Recommend to a Friend
Rigol DS1054Z Digital Oscilloscope
5.0
Rich in features, easy to use, accurate. This is a lot of scope for the price.
Verified Purchase
J Namgreb on
Dec 09, 2017
Recommend to a Friend
DS1054Z with all the Options Enabled
5.0
Rigol DS1054Z
I have read reviews on the this scope for a while and when the free options were offered no brainer to pull the trigger and purchase this scope. The people at Tequipment were knowledgeable and pleasant to when I had questions and talking my order. (Thank you)
I like the design and layout of this scope and its intuitive controls with a context help menu button is a great feature in learning the advanced functions.
This scope feels solid (not a toy) and the resolution of the display is good and clear and the data display is easy to see pleasing to the eye.
After just a week I found that the new options are spectacular it has a similar feel as the analog scope
I have already tested the I2c and serial options and found that they are great for analyzing data and troubleshooting communications issues with ham radio and microcontrollers.
The XY plots are much improved over the older version of the Rigol entry series scopes.
The persistence settings have a phosphor look to them in either dot or vector settings.
I like the FFT option but it could use some love from the programmers and the navigation system
with the user interface and scrolling through the spectral waveform markers would be a nice options.
Unbelievable options
At $350 Bucks with all the options enabled this scope is a great deal.
This gets my “I Would Buy it Again!” Stamp of approval!
John Wilson on
Dec 08, 2017
Recommend to a Friend
Best bang for the buck
5.0
We purchased one of these scopes for our makerspace (www.hive13.org) and it has been working in our electronics area for a while.
I liked it so much I purchased one for myself. My previous hobby scope was a Hantek, but with only 2 channels and the weak interface I just wasn't happy.
The Rigol has been preforming well beyond expectations and with the current sale the price can't be beat.
I did some quick comparisons with a function generator and the scope was right on the money.
I don't think you can get more bang for your buck right now.
Brad
Verified Purchase
Brad Walsh on
Dec 08, 2017
Recommend to a Friend
Tech upgrade
4.0
I purchased this as an upgrade for my portable old Tectronix. Installed key options package with little effort and now getting opportunity to increase my tech abilities to fix electronics on my repair bench. Scope has plenty of possibilities and modes. A new challenge to keep my skills growing at an affordable price.
Verified Purchase
James Krivitsky on
Dec 07, 2017
Recommend to a Friend
Rip Van Winkle awakes!
5.0
From an R D Technician back in the early 70's using cart-borne monster 'scopes; then fast-forward to almost 2018. Wow! What a difference ˜45 years make. The DS1054Z is an amazing tool, function wise as well as price wise.
Now at 77, I am developing an electronics course for 4-H kids using the Raspberry Pi and Arduino. This scope will be perfect for the lab sessions and to help visualize theory in the lecture sessions. I look forward to many hours using it at home and in the classroom. Thanks RIGOL
Richard St John on
Dec 07, 2017
Recommend to a Friend
Great first scope for me!
5.0
This is my first DSO. I had some limited experience in college with analog scope. So far it has worked well. The build looks solid, power on seems to be quick enough and the fan noise I’ve read about is not much at all. I got several advanced options free 24m memory, serial decode and I’m planning to work through SPI decode using a NodeMCU to OLED display next. I expect good things from the DS1054Z.
Tequipment ordering was easy and shipping prompt and on time.
Verified Purchase
Ricky Steele on
Dec 06, 2017
Recommend to a Friend
DS1054Z
5.0
I Purchased the DS1054Z O'Scope and was very much surprised by the quality of the scope. I have been using digital scope for over 20 years and this unit is well worth the money.
Verified Purchase
Jeffrey Schmidt on
Dec 06, 2017
Recommend to a Friend
First oscilloscope
5.0
I used analog scopes in college but just recently decided to buy one for my hobbyist interests (learning electronics pi and arduino). So fare the RIgol 1054Z has worked very well. Fan noise you see mentioned is not much of an issue at all. I’m still learning but this device seemed to have a lot to offer! Oh and I got the decode and 24meg options free. So no need to hack. Tequipment delivered the item quickly so no hassles!
Verified Purchase
Ricky Steele on
Dec 05, 2017
Recommend to a Friend
Amazing Value for Hobbyists and Beyond
5.0
I purchased this after hearing about it multiple times on EEVBlog. I am returning to electronics as a hobby after nearly 20 years.
I haven't used an oscilloscope since my high school days in the late 90s. Those scopes were old school analog CRT. The DS1054Z has been easy to use so far. I'm not sure how it compares with more expensive scopes but this is quite the upgrade from what I used back in the day.
You can't beat the value of this thing for a hobbyist maker. I am sure it has applications for education and even more advanced users.
Verified Purchase
Jeremy Morgan on
Dec 05, 2017
Recommend to a Friend
Very Impressive unit for the price range.
5.0
The product come in a timely manner and although I purchased it for Christmas I did a quick look at it before my wife said I have to wait for Christmas. The controls felt like they were of a good quality and the package is small enough to fit nicely on my desktop. I studied several You Tube videos and am really excited to use it in a comprehensive study of electronics. The 4 channels and the various features made it my choice over a unit that was priced about $100 less than this unit. As a retired electronic technician, I can't wait to open up the package at Christmas and really put it through it's paces.
Verified Purchase
Anonymous on
Dec 05, 2017
Recommend to a Friend
good scope, good value
5.0
haven't had too much time with it yet but so far an amazing scope for the value!
Verified Purchase
Brian on
Dec 05, 2017
Recommend to a Friend
unregulated to this = 125cc scooter to new civic
5.0
Up to this purchase I had bought about 6 different unregulated irons. Weller, Goot, etc. I had succeeded in assembling several projects, such as an x0xB0x, but had also failed at a lot of assembling.
For years I had blamed myself, thinking I was missing some key point of technique. I watched videos, used extra flux, roughed terminals up that I was soldering. I tried a lot of things. Eventually I gave up and had partners and employees do all my soldering between their other responsibilities (seriously).
Recently I have needed to do a lot of assembly, including parts with different thermal conductivity and different mass (like soldering to chassis and big ground planes, pots, and still small parts). So, I needed a solution to my soldering situation.
After reading reviews I bought this and some Kester 63/37.
Now, soldering is easy. I'm talking like, had I used this system for the last 20 years, I would never have been convinced there was anything to soldering.
One star off because I don't like the UI. It's fiddly if you want to change temperature. I would prefer a plain old knob. Currently, I'm set for Kester 44. But if I ever have to change it, I'm sure I'll need to RTFM.
Anyways, this thing works, and it works exactly as I would have expected a soldering iron to work if I had never known better. It's not a Tesla or a Cadillac, but it's definitely going to do the job, do it reliably, and do it well.
I would recommend this purchase unless you're going to be soldering a lot of SMT -- then you'd need to consider spending another hundred or two hundred bucks and getting something more suited to the task.
For everything else, this guy does just fine.
Verified Purchase
Jonathan Pratt on
Dec 01, 2017
Recommend to a Friend
High School Robotics Coach and Electronics Mentor
5.0
LOVE THIS SCOPE! Oh my goodness....it has SO MANY features.
We're a county-wide team, and we have students from many schools. This scope just fits right in with us. it's so easy to read. Has a bright-clear display. Auto-display waveform voltages, frequencies, locks right on in a heart-beat to all of our sensor and arduino (and other microcontroller) waveforms. The Stop/Run is basically perfect. You press Stop, then roll the Horizontal Position dial a tiny bit, and the waveform for all (4) channels clears up instantly.
We have it plugged into the LAN, and we "PRINT" directly to a USB Memory Stick for moving files to the PC, for email, posting into slack.com (our team management blog), and for displaying waveform graphs in meetings (we are currently building a Low Earth Orbit (LEO) Satellite for launch in 2018....besides our regular robotics duties! We're trouble shooting Arduino to DAC protocols over SPI and other I2C packets.
We haven't yet paid the approx. $180 to upgrade to the packet decoding firmware. But, the first 30 hours using it was phenomenal. That's a little steep of a price for just that functionality, but it'll prove worth it. And, we'll probably be paying another $180-$200 for the other I2C, RS232, serial data, etc., decoding capability. By the time we finish with that, yes, now we're going to be up to an $800 scope. But, it's operating so pro-like, that I'm not feeling hesitant to do these upgrades. Do wish we could locate a not-for-profit 1/2 off discount, though, for these upgrades!
Rob on
Nov 28, 2017
Recommend to a Friend
Scientist
5.0
Pro branch supply, great value.
Anonymous on
Nov 25, 2017
Recommend to a Friend
A great power supply for the price
5.0
I bought the DP-832 from TEquipment. Good price and it was shipped quickly.
The power supply is a very good value. It does everything that it claims to do. Build quality is much better than many imports. I will likely buy another.
No real complaints. The fan is a little loud.
T
DaveD on
Oct 29, 2017
Recommend to a Friend
Rigol DP832
4.0
Good:
* Product works just fine as expected.
* I love the OVP and disable channel button. Keeps people from messing up the knobs.
Negative:
* I actually like this model better than the DP832A with their new display.
* The programming is disabled and requires a key (LAN). I guess I will not be programming it quite yet. #disappointment.
Verified Purchase
Brian Holaday on
Oct 19, 2017
Recommend to a Friend
Amazing value
5.0
This is a very nice scope for the money. There are several features that also can be upgrade via purchasing a key. If you are looking for a scope, this is hard to beat. Check out the review on EEVBlog, he goes in depth with feature reviews and a tear down.
Matt on
Oct 15, 2017
Recommend to a Friend
Excellant Scope
5.0
The scope readings match exactly to my Tektronics Scope.
Verified Purchase
Robert Parenton on
Oct 03, 2017
Recommend to a Friend
Great Value
4.0
Phenomenal value. Incredibly deep memory, and features can easily be upgraded to those of more expensive ds1000 series scopes later.
One caveat is that the front end electronics are noisier than Tektronics, etc which are admittedly MUCH more expensive. This is typical of inexpensive Chinese scopes, but if you don't use the highest sensitivity settings then you can save a tremendous amount of money.
Verified Purchase
eugene on
Sep 04, 2017
Recommend to a Friend
Good
5.0
Value on this thing is incredible. Wish the menu select knob had a detent or something. hard to select menu items. i2c decode works well
Torban Peterson on
Aug 14, 2017
Recommend to a Friend
Good
5.0
Seems to work well. Only issue I had was being careful with the highlighted voltage digit. one button press took me from 3.3v to 13.3v. Unit is very deep.
Torban Peterson on
Aug 14, 2017
Recommend to a Friend
A Great Value in a Programmable Power Supply
5.0
I have used this programmable power supply now for several projects over about a month to characterize the V-I characteristics of a series of TVS diodes. This power supply has shown itself to have outputs that are surprisingly accurate, stable, and quiet. Setting up a series of precise test voltages with a precise current limit was a snap. The unusual circular numeric keypad looks odd, but in practice it's very easy to become accustomed to it and I don't think it's a bad thing at all. Setting up voltages and currents with it is quite easy with very little practice.
As others have no doubt mentioned, this unit does have a fan, however at the low output power levels I used the noise level was minimal and not annoying to me at all.
FMT Dave on
Aug 13, 2017
Recommend to a Friend
Hakko Digital Soldering Station
5.0
Fast shipping. The specifications were out standing. Very happy with ti soldering station. Thanks for being there.
Verified Purchase
Dale Hanson on
Jul 09, 2017
Recommend to a Friend
Nice to have
5.0
It is really nice to have a good power supply. This power supply is easy to use and has some powerful features.
Scotty on
Jun 28, 2017
Recommend to a Friend
Great Value!
5.0
Jam packed with all the features of many high ticket brands. The best value by far in my opinion.
Verified Purchase
Pedro Castillo on
Jun 21, 2017
Recommend to a Friend
Solder station
5.0
Great product. Performs as advertised right out of box. Low learning curve. Great results.
Rick on
Jun 20, 2017
Recommend to a Friend
Great O-scope!
5.0
If you are looking for your first oscilliscope you can not go wrong with this scope! It has more features for less cost than a dual channel 20Mhz scope back in the 1980s!
Verified Purchase
Badass on
Jun 11, 2017
Recommend to a Friend
Awesome value for a well built 4ch scope
5.0
Outstanding value. Seems very well built and easy to use. All the trial options are a great added bonus so you can see what you would really use. Service from TEquiptment was top notch, friendly and helpful. My scope arrived sooner than I expected. Don't underestimate the value of 4 channels in a scope at this price point. Channels 3 and 4 are helpful more often than you think and when you must see 4 events at the same time to find an issue a 2 channel scope just won't do. My only suggestion to Rigal would be to use encoders with detents for all the knobs. The fan noise level.doesn't bother me .
Verified Purchase
David E Queen on
Jun 01, 2017
Recommend to a Friend
Excellent Power Supply
4.0
The Rigol DP832 has been working great for me. It is very intuitive and easy to operate, and the quality of the DC output is superb. I really enjoy the ability to turn each channel on and off individually.
The reason I removed 1 star is because:
1) The High Resolution Display/Control should be a standard feature, instead of an extra $110 for the unlock code. Everyone can benefit from the fine resolution control. I am OK with the other locked features being extra cost, since not everyone can use them.
2) I wish there was a way to internally configure the power supply to put channels 1 and 2 in series. They can be manually connected with a short jumper wire, but cheaper power supplies have this feature...and I am naturally lazy enough to not want to walk across the lab to get a jumper cable.
Overall, a great power supply for a decent price.
Verified Purchase
ROBBIE B on
May 25, 2017
Recommend to a Friend
This is the entry level scope to get
5.0
THIS is the entry level scope to get. The screen size and resolution are the smallest I'd want to use. It does not "feel" like a small screen. (because it isn't!) At first I did not think I'd used all four channels but with four I can have a useful logic analyzer. I'm working on embedded microprocessors and motion control I can see both logical level control and power on the same screen and take good-enough measurements. The ability to capture data and send it to people is so much better than emailing a cell phone photo of the analog scope screen
My only complaint is the FFT screens. They are hard to read and hard to interpret. Still 5 stars because of over all build , value and ease of use
Chris on
May 21, 2017
Recommend to a Friend
Great oscilloscope for the hobbyist
5.0
After having spent 8 years as an electronics technician in the Navy, I am getting back into it as a hobby for me and as a diversion from video games for my son. I have never owned an Oscope and my previous experience was with analog scopes. So far this is a great little scope. I have only used it a dozen or so times and, after fumbling around for a few hours (its amazing how much I have forgotten about scope usage in general), I am able to make measurements with confidence. For the price this thing cannot be beat. I have not tried to unlock any of the features but may if any future project require the advanced functionality. I highly recommend this little Scope.
Verified Purchase
Jason Kemper on
May 20, 2017
Recommend to a Friend
Best bang per buck scope
5.0
the scope has a lot of features, is a really good scope for the money, and
it dose have a few quirks with it , and the firmware, though, and i new this before making my decision to buy this scope, i don't think ll ever hit those said quirks.
Verified Purchase
Anonymous on
May 15, 2017
Recommend to a Friend
Very solid PS
4.0
Pretty good bang for the buck. I'm not using some of the advanced features yet, but it does the basics quite well. Only negative is the fan noise, it's LOUD.
Anonymous on
May 05, 2017
Recommend to a Friend
Great, Very Satisfied !!
5.0
Lots of features ! I had a Tektronix TBS1102b, it has way more Gsa/s per channel but for my intended use I needed much more depth memory and a serial decoder, with that I'm very pleased with the DS1054Z.
It has a lot of features, great interface, well construct, the four channels is amazing ( specially considering the price tag ), resuming is the "Best Bang fot The Buck" in the market !
Verified Purchase
Gustavo Komel on
Apr 29, 2017
Recommend to a Friend
Best bang for the buck ! By far !
5.0
It has all the features that a high end has and it's reliable, low noise, great interface, good construction, lots of features, really well made !
I don't think we have anything near this bang for the buck in the market today, even with the "better" ones ( much more expensive ones ) the gain is marginal, unless you need something more specific, other than that this is the one.
Verified Purchase
Gustavo Komel on
Apr 29, 2017
Recommend to a Friend
Hobbyist
5.0
I decided to get back into electronics because of another hobby, Model Trains, which have really become interesting with all the electronic features that they now have. I decided to set up a basic lab and settled on the Rigol DS 1054Z after reading the reviews. I am glad I did, it seems to be a lot of scope for the money and I am having fun learning how to use it. Rigol was not in my thinking but the more I see of their quality and price the more impressed I am.
David Birch on
Apr 22, 2017
Recommend to a Friend
Great inexpensive station
5.0
Excellent little station, heats up quickly and its very high quality. Great option if you need a good inexpensive soldering station.
Verified Purchase
Jorge PD on
Apr 20, 2017
Recommend to a Friend
Faulty on arrival
3.0
When I unboxed the unit I found it to be well packed and well padded by the packing material. I could not wait to start using the DSO. The user interface with the various buttons and dials took a little getting used to. I found the interface a little unresponsive, for example when enabling or disabling channels you might have to press the button a couple of times to get it accept the selection. I also found it disconcerting to hear relays clicking as I changed the vertical scale. I could have lived with this behaviour but when I started to examine the waveforms, either from the calibration output or from shorted inputs, I found there was high frequency noise present superimposed on the waveform.
The noise occupied 1 increment (2mm) on the vertical axis irrespective of the vertical scale and irrespective of the channel or channels selected. I tried different probes, those that came with the unit and others that I already owned, and it did not make any difference. There appears to be an issue with the vertical amplifier. I contacted TEquipment and they promptly organised an RMA to return the unit. Unfortunately I have to wait until they receive the unit back, and test it before sending a replacement. They did offer me the option of buying another and then getting a credit back when they receive back the original unit but who wants to pay double for something that arrives faulty?
I will update the review when I have received the replacement and tested it out.
Verified Purchase
Andrew Smallridge on
Apr 19, 2017
Recommend to a Friend
The DS1054Z
5.0
What value! This scope provides a lot of capabilities for the price. At $400, you get what, not too long ago, would have cost around $4000!
Once you get familiar with the scope and its many capabilities, you won't want to look at any other possibilities to meet your scope requirements.
I just can't believe I can get this much value in an essential instrument for this price.
The ONLY drawback I found to the scope is it doesn't provide a contrast setting so you're not able to adjust the display as well as you might like for the lighting conditions of the room.
But for $400, I'm adjusting quite nicely!
Verified Purchase
Raymond Leiter on
Apr 18, 2017
Recommend to a Friend
Good value
5.0
Great value for the money, and tequipment has the best prices I've found.
Verified Purchase
TimS on
Apr 12, 2017
Recommend to a Friend
A company that does right...
5.0
Second purchase with TEquipment, great product and service. Will look to them when other equipment is needed.
Jerry on
Apr 09, 2017
Recommend to a Friend
Great addition to hobby workbench
5.0
I'm a hsm and electronics hobbyist - casual user .
Replaced a Tek scope which took up about five times as much space on the bench.
Menu driven functions have a learning curve, but are readily mastered.
My old eyes have a bit of an issue reading alphanumeric info, but scope placement on the bench has made that a minor issue for me.
Very pleased with this scope
Verified Purchase
HowardST on
Apr 08, 2017
Recommend to a Friend
Hakko FX-888D-BY
4.0
Great fast shipping from TEquipment. Although I don't do much soldering I purchased this to assist in the construction of a model railroad. It replaces an old pencil style iron that was painful to use. This unit heats up fast and the station (something I never had) is very useful. My only complaint is the user interface. I had to go on line and look at the video to figure out how to put it in the Temperature preset mode. It came set up so it would turn on to 750 degrees F and you adjusted the temp from there. the instructions recommend that you clean/tin the tip at 482 degrees F. I adjusted the preset 5 temp from what it came with to 482 degrees thinking it will be easier to remember. Left the other presets as they were since most of my work is pretty basic. From a novice this unit is probably more than I needed , but I enjoy working with good tools.
Rick on
Apr 05, 2017
Recommend to a Friend
Excellent value
5.0
We purchased this scope for our makerspace (Hive13.org).
Our aging analog scopes were great for introduction to basic electronics but didn't have any storage (and the small CRT was hard for multiple people to see).
After a great deal of research the Rigol 1054Z arose to the top for the best "bang for the buck".
This is part of the new Asian value scopes that deliver almost all the features of the big names (Tektronix, Keysight) for about 1/2 the price.
While I don't think they have quite the build quality of the military grade Tek line, I do feel they meet the need of the hobbyist.
I personally bought a Hantek scope with similar features a few months ago, and I now wish I had gotten the Rigol.
All these types of scopes usually suffer mostly from poor user interface design. You can really feel the menu structure and language is not quite baked. Comparing the Hantek to the Rigol I really feel like Rigol spent much more time on usability and overall appearance.
I now know why the Rigol continues to win comparisons on the value scope line.
We plan on putting this scope in our electronics lab as the main unit.
I'm giving a class on the operation this weekend and I've dug pretty deep into the various menus and overall operation and I am still in love with this scope.
We are a happy customer.
BradmanOH
Verified Purchase
BradmanOH on
Mar 30, 2017
Recommend to a Friend
My first oscope
5.0
I'm a seasoned software developer of 30 years. I bought this scope to help me learn more about electrical circuits as I started doing more bare-metal embedded programming.
I haven't touched an oscope this century, so I was a little intimidated. All those fears were for naught - my experience with the Rigol DS1054z has been fabulous. It is very easy to use and I have been exploring/using various functions (e.g., math, triggers, etc.).
As a plus - the saving of screenshots to a USB drive is trivial and I actually use that feature almost every time I use the scope.
The size is nice, it's pretty quiet, and I've been using it nearly every day since it arrived. I've already recommended this scope to a number of people.
Verified Purchase
Willie Walker on
Mar 27, 2017
Recommend to a Friend
Great
5.0
A great step up from the single source supply that I have been using. The interface is intuitive and the quality of the unit is great for the price.
Verified Purchase
Jay on
Mar 22, 2017
Recommend to a Friend
Great Value for a Digital Scope
5.0
What can I say that hasn't already been said about this scope, it is fantastic. The build quality is great, the controls have good feedback, and the menus are very intuitive.
After using this scope I am going to seriously consider Rigol for any future replacements, additions, or upgrades on my bench.
Verified Purchase
James on
Mar 19, 2017
Recommend to a Friend
Great Power Supply
5.0
As most others have said, this is a great power supply. I spent a lot of time researching power supplies in the $500 - $600 CDN range and the DP832 really stood out. After receiving the supply and using it on a few projects I am pleased to say it performed flawlessly. Easy to use, great display, and is more than accurate enough for everything I plan to do with it.
Verified Purchase
James on
Mar 19, 2017
Recommend to a Friend
Rigol DS1054Z
5.0
The Rigol DS1054Z is an AMAZING oscilloscope! I had an Instek 100 Mhz dual trace from 2008 and this scope is so much more capable I can't believe it at a $399 price point. I particularly like the many trigger options including greater than less than triggering (pulse greater than 5 ms but less than 10 ms). Also the RS-232 decoding is a very nice feature. The many horizontal and vertical measuring options and the 4 input channels make this a real winner; a Tektronix scope that can do this is 2-3X more costly. I use this every day and aside from the slightly noisy fan (nit picking) I haven't found a downside.
Verified Purchase
Gus R on
Mar 14, 2017
Recommend to a Friend
Great Scope
5.0
Unbelievably good for the price point. Everything is solid. User interface is very intuitive, with very little need to reference the manual. Probes are decent. Has some fantastic features. At this price point, this seems to be the go-to scope for home use.
Verified Purchase
Anonymous on
Mar 12, 2017
Recommend to a Friend
Nice Soldering Station
4.0
Have used Wellers in the past. But, Hakko now seems to have more usable tip selection than Weller, and I've read reviews on quality issues with the Wellers. I'm not crazy about the look (color scheme) of this station, but it seems to be a good unit for an affordable station.
Verified Purchase
Barry on
Mar 12, 2017
Recommend to a Friend
Great Scope
5.0
This is a great scope with features that are missing on name brand scopes that cost several times more. At work I have access to many highend scopes that have all the bells and whistles one would want or need, this scope has most all of the same features just with lower bandwidth making it a great home bench scope. My only gripe with the scope is the yellow probe tip insulators do not stay on as well as they should. I normally use the clip ends anyhow making a non-isuue.
Verified Purchase
Eric on
Feb 24, 2017
Recommend to a Friend
Hakko FX888D
5.0
Just by looking at this soldering station you can see the quality is amazing. I own an Aoyue (older Hakko clone) and doesn't even come close in quality. For the small price difference I would definitely recommend this Hakko unit!
Verified Purchase
Raymundo Magana Gomez on
Feb 21, 2017
Recommend to a Friend
Fine scope, great for the money!
4.0
I'm an old-school analog scope user and this is my first digital scope and my first storage scope. So I've just barely scratched the surface of what it can do because I tend to use it in the way that's familiar to me from a long time ago. But it does a great job; no complaints, and it's great to have a scope this capable that's also so small and light.
It was priced very well and it arrived promptly. All in all a very satisfying purchase that I would recommend to anyone.
Robert on
Feb 16, 2017
Recommend to a Friend
Meets all my needs
5.0
I'm sure there are 'higher-end' power supplies out there, but we just need an easy-to-use, reliable unit with very few bells and whistles.
Overcurrent/overvoltage protection is handy, and has saved a couple of components on my bench.
42 Design Fab on
Feb 13, 2017
Love it
5.0
Use this for my RC hobby. Makes quick easy work of soldering. Well worth the money for its ease of us and reliability.
Paul on
Feb 09, 2017
Recommend to a Friend
Works like a charm
5.0
Worth the investment for a beginner. Heats up quick (15-30 seconds) and keeps temp. Work station is well built -- not flimsy. Keep the instructions, power station is easy to read but resetting the presets may not be intuitive without the instructions. Good value, reliable tool
Anonymous on
Feb 07, 2017
Recommend to a Friend
Very Nice!
5.0
My first solder station and I'm very happy with it. I have soldered before at my job but never owned my own until now. I'm glad I got it.
Verified Purchase
Angel S on
Feb 05, 2017
Recommend to a Friend
great scope
5.0
Nice scope with lots of features. It's solid and feels well built right down to the nice probes.
The display is small but nice and sharp with lots of info. The brightness is adequate, but it would be nicer to have a brighter backlight. The waveform has a nice analog scope feel thanks to the intensity grading. The viewing angle suffers a bit if put on a high shelf.
The main shortcomings are protocol decoding/triggering which are better done with a dedicated logic analyzer. The FFT isn't very useful, it just seems like a way to check off a feature item.
The deep memory is nice to have as are the 4 channels.
One minor annoyance is the huge battery of measurements turned on by the left row of buttons aren't as easily turned off and end up cluttering the screen. Holding down the "measurement" button for 5 seconds clears them all, but a more intuitive 2nd press on the left button should turn off the corresponding measurement.
The connectivity options over USB and ethernet are useful for extending the capability of the scope with PC based processing.
All in all it's a great scope and a very useful tool, and thanks to its popularity and widespread use is well supported by the manufacturer, and more importantly by the large user base and tools/info on the internet.
Verified Purchase
Jake on
Feb 04, 2017
Recommend to a Friend
Rigol DP832 Back to Reviews
5.0
Love this power supply for its CV and CC features.
Verified Purchase
Bill Steiner on
Jan 31, 2017
Recommend to a Friend
Great soldering iron!
5.0
I needed to replace some caps on an lcd monitor that was acting up. I broke out my old no name wand iron that took 5 minutes to get hot enough to tin the tip and was unable to maintain heat to desolder the caps. After receiving it, I plugged it in and was amazed when it heated to 750 F in a little over 10 seconds. I was able to desolder old cpas and resolder new caps in less than 5 minutes. I am incredibly happy with the purchase.
Verified Purchase
Dennis Partin on
Jan 31, 2017
Recommend to a Friend
Rigol DS1054Z
5.0
Just recently getting back to play with electronic...This is great price for a great scope
Hai Nguyen on
Jan 30, 2017
Recommend to a Friend
Excellent Product
5.0
I had an lcd monitor that lost horizontal hold because of a couple of bad caps. I broke out my old wand soldering iron that took 5 minutes to come up to a temp hot enough to tin the tip. It would not hold temp long enough to desolder the first cap. The Hakko heated up to 750 F in less than 10 seconds and made short work of the desoldering and resoldering 2 capacitors.
Verified Purchase
Dennis Partin on
Jan 28, 2017
Recommend to a Friend
Incredible value
5.0
4 channels at $399! Good enough to get you started captuing low-medium frequecy signals. Packed with software features (most of which I haven't explored yet).
Only gripe is the FFT hardly works (too few sample points). If this is feature you rely on, maybe bump up a model.
mppics on
Jan 27, 2017
Recommend to a Friend
Great scope
5.0
Bought this as my first digital scope an up grade from a Tek 935a and an RCA WC-91c an old but decent 4Mhz work horse both old scopes are best for low frequency work an the 1054Z will finally let me trouble shoot modern equipment. The 1054Z is easy to use once you get the feel for how the menus work.Great display frequency counter on channel 1 is hardware, accurate, and agrear feature. Can't say enough good about this entry level feature packed scope. Would definitely recommend this unit.
KD2GFO on
Jan 20, 2017
Recommend to a Friend
DS1054Z
5.0
Very nice scope for the money.
Does all that I need.
Solid build.
Cal time is a bit long.. But not a big deal for me
Upgrade to 100MHZ went well.
4 channel nice to have
Lot of user feedback and help on the web
Verified Purchase
Anonymous on
Jan 13, 2017
Recommend to a Friend
Instrument Tech
5.0
I really enjoyed the way you plugged it in and 30 sec later you were ready to go. The holder also works great.
Scott Lindsey on
Jan 13, 2017
Recommend to a Friend
Hakko FX888D
5.0
Excellent soldering station. Heats up quickly. Easy to adjust temperatures.
Verified Purchase
Carlos Giroud on
Jan 08, 2017
Recommend to a Friend
Nice Product
5.0
Nice good quality and affordable can use different soldering tip and tips are inexpensive.
Al on
Jan 08, 2017
Recommend to a Friend
Best bang for buck Scope!
5.0
I bought this scope for some automotive applications and I am more than happy with the quality of the Rigol 1054z. With the ability for 100 MHz bandwidth and 4 channels all for under $500 you simply can't beat it!
Verified Purchase
Michael Kushnerik on
Jan 05, 2017
Recommend to a Friend
ds1054z
5.0
This is actually m first DSO, so far I am very pleased with its capabilities, lots of features yet very compact, though it can be intimidating at first but once you get the hang of it , it's definitely worth the time
Verified Purchase
bob7185 on
Dec 27, 2016
Recommend to a Friend
Rigol 1054Z
4.0
Delivery was prompt and scope arrived in perfect condition. Does everything I want in a scope. Great performance at the price level. Screen is a little small but adequate.
Verified Purchase
David Schuh on
Dec 18, 2016
Recommend to a Friend
Great unit, well priced
5.0
Recommended on the EV blog as an entry level scope, which was just what I needed. It is well built and has enough features to grow along with me in my new hobby. Love it!
Verified Purchase
Gary Udstrand on
Dec 15, 2016
Recommend to a Friend
Quality Scope
5.0
Very pleased with this Rigol DS1054Z scope it is my first digital scope. I have two analog scopes and this will be an asset to me. The scope works great and is small and compact. The overall quality seems to very good for a scope in this price range. I will purchase a Rigol product again.
Verified Purchase
cartec on
Dec 13, 2016
Recommend to a Friend
Digital Oscilloscope for everyone
5.0
I have been considering to buy a digital oscilloscope for months and spent a lot time reading and watching reviews.
The EEV blog is a great source of inspiration.
Finally decided to get the Rigol DS1054Z and I am very happy with my purchase. As beginner enthusiast I want to learn how signal behave in my Arduino projects and needed something powerful but easy to use, at the reasonable price and the Rigol strikes the right balance. In addition I find the context help an awesome feature. I appreciated the product value so much that I immediately followed up with The Rigol DG1022Z signal generator and the Rigol DP832 power supply.
Now I feel I have all I need to fully enjoy my hobby.
Ivan Pedruzzi on
Dec 08, 2016
Recommend to a Friend
Great Ocilloscope
5.0
My first "dso" oscilloscope.
have been using about a week now. Repairing old fm am radio its seems to be working ok.
If you have never used a dso before, learing curve is a little steep, but I'm getting the hang of it.
mine came with latest firmware
never has locked up even once.
A
Verified Purchase
Benjamin Clowdus on
Dec 05, 2016
Recommend to a Friend
Great Digital Oscilloscope for The Price
5.0
DS1054Z is a great digital oscilloscope at the price. There is better one, Tek's scope, but is very expensive.
It comes with most functions for general usage. I like the huge screen and 12MB deep memory very much.
The shipping box does not has a CD inside, although the website says that it has a "Resource CD (User’s Guide and Application Software)". Anyhow, the software can be downloaded online.
Verified Purchase
Anonymous on
Dec 01, 2016
Recommend to a Friend
Spoldering is fun!
5.0
After years of struggling with non-temperature controlled soldering irons, oxidizing tips and poor solder joints I found that my new Hakko is a pure delight. Should have bought one years ago!
Albert Z on
Nov 25, 2016
Recommend to a Friend
New Scope
5.0
Great for a general use scope. Just fits my hobby bench and is easy to use.
Mike on
Nov 21, 2016
Recommend to a Friend
Hakko FX-888D
5.0
Awesome unit at a great price..Easily better than anything I've used in the past.. Heats up very quick, digital temp controller is very accurate. TEquipment's customer service is top notch!
Verified Purchase
Jordan M on
Nov 18, 2016
Recommend to a Friend
Very nice Scope
4.0
Very impressive scope and probably the best on this price range and a little above. The only complaint about it is the probes that are too fragile.
Verified Purchase
Anonymous on
Nov 15, 2016
Recommend to a Friend
DS1054Z
5.0
Received in a timely manner and as advertised. I had to update the firmware. Otherwise, this scope performs better than I expected.
Verified Purchase
Charles Stacy on
Nov 15, 2016
Recommend to a Friend
Owner
5.0
This scope is a fantastic value for anyone who is in the repair business like I am. I have two Rigol scopes and the rigol dg1022 function generator, They are very reliable and gear that I depend on day in and day out hundreds of hours of use per month. So yes I recommend them and I also recommend Teqquipment.net for providing fast friendly shipping and over the top great customer service.
Chris Church on
Nov 06, 2016
Recommend to a Friend
Great Scope, Accessories not so much
4.0
This scope is amazing value for money. Probably the best on the market right now.
I was disappointed with the quality of the probes, two of which came to pieces the day they arrived. Tequipment gave me a $50 refund, which isn't enough to replace the two but is a start. Manufacturer's warranty isn't available internationally so I had to glue them back together :(
Matthew on
Nov 03, 2016
Recommend to a Friend
Amazing entry-level scope
5.0
This is my first scope and will primarily use it for my hobby. After tons of research, I found this scope to be a bit more than I need, however I couldn't really pass it up. It has all the goodies you see in the higher dollar scopes, while maintaining an entry-level price point. I figure it is something I'll have for a long time and it has the option to pay for upgrades (sadly no official bandwidth upgrade though, at least no official one, I heard there's a hack...at your own discretion)
A lot of people recommended this scope and I can totally see why. Just make sure you are current with the firmware updates because there are occasional glitches that get discovered and ironed out.
Verified Purchase
Robert Freeman on
Oct 27, 2016
Recommend to a Friend
Great Scope!
5.0
I upgraded from an old analog scope to the Rigol DS1054Z for my first digital scope. This thing is so easy to use and I love the fact that I get voltage and frequency measurements in the form of min, max, avg and so on. I can't say enough about this scope!
Gregg on
Oct 21, 2016
Recommend to a Friend
Great Hobby Scope
5.0
I'm an EE student and avid hobbyist. Most of my work tends to revolve around microcontrollers and audio. This is my first scope.
Pros:
Great measurement and analysis functionality
Easy to use
Easy and versatile triggering
Easy interface to PC (I typically use Matlab)
Cons:
Interface is just a bit slow, but I've adjusted to it and it doesn't bother me. Nothing that hinders use.
FFT is too low resolution for any real use, at least in my experience. I find myself grabbing the waveform over the LXI connection and then performing the FFT in Matlab on my PC.
Fan is a tad loud, but it is quieter than my PC
Kevin on
Oct 17, 2016
Recommend to a Friend
Awesome!
5.0
This soldering station is awesome, I can't say enough good things about it!
Verified Purchase
Lowpuller on
Oct 16, 2016
Recommend to a Friend
Unbelievable, at this price.
5.0
I love the scope and have no complaints. Fast shipping too. I spent quite a while trying to pick out one that met my budget and my needs. This one does, but it does very much more.
Verified Purchase
vectorspace on
Oct 11, 2016
Recommend to a Friend
So Far ----- Great
5.0
I only had this a few days so far, so I can not comment on the performance. I have been using a Tektronix 7503 150 MHtz for years, but my wife bought a new car and I now have no room in the garage for it. The 7503 was huge and heavy and the DS1054Z is small and very portable compared to it. I had to bring all the equipment to be tested down to the garage before. Now, it will be a pleasure to be able to bring the DS1054Z upstairs where I need it.
I can tell there will be quite a learning curve with all the menus etc. All the controls on the analog scopes are pretty intuitive. Going through the different menus, I can see this scope has many-many more functions than the old one.
TEquipment shipped the unit very quickly, but FedX's shipping was very slow and their tracking was sparse.
Verified Purchase
Chuck on
Oct 07, 2016
Recommend to a Friend
Nice power supply
4.0
I'm very happy with the supply. Having a good linear supply on my bench is important as it doesn't have all the high frequency noise a cheap switcher has. I looked at several reviews including the one on eevblog and have found it works well and meets my expectations. It took a bit to get used to the user interface however in now find it easy to use. I recently used it to charge the lipo batteries in a piece of gear, being able to current limit was important and it worked very well. I plan to buy the hires display option, the only reason I gave it 4 stars is it doesn't come with the option from Rigol.
Verified Purchase
NEIL BREEDEN on
Oct 04, 2016
Recommend to a Friend
Great Scope!
5.0
If you're even considering getting this scope, do it! You won't regret it.
Verified Purchase
pvillegeek on
Sep 23, 2016
Recommend to a Friend
Nice
5.0
really nice equipment , quick shipping
thanks
mike on
Sep 23, 2016
Recommend to a Friend
Hakko FX-888D
5.0
Great soldering station. Up to set temperature within 15 seconds of switch on. Nice light iron. Tips are easy to change and come in a great variety. Excellent service from TE .. It will probably last longer than I will .. well designed and built.
Verified Purchase
Robert Reiber on
Sep 06, 2016
Recommend to a Friend
Hakko FX888D
5.0
I agonized quite a bit before buying this - concerned about the price, and whether I should be getting a Weller instead. After completing a lengthy SMD project using this iron, I'm extremely happy I made the purchase. The ergonomics, temperature stability, and overall performance are all great. It's just a case of investing in quality tools - they'll last a long time.
Anonymous on
Sep 04, 2016
Recommend to a Friend
Best Low Cost Scope
5.0
The BEST beginner scope for the price! Works with Matlab & NI software. The probes that come with it are a little cheap, but they work well enough. UART/SPI/I2C decoding is available for a reasonable price along with some pretty nice triggering options.
Verified Purchase
Boone Angel on
Aug 31, 2016
Recommend to a Friend
Best value for the money!
5.0
We needed a digital scope for adding waveforms to our documentation. As a bonus, we got a lot of features for a very low price. TEquipment offered an even better price than Amazon or any of the unknown vendors on eBay.
The Rigol DS1054Z is currently the best value scope available by a huge margin. Lots of features, such as 4 channels, digital phosphorous, more math and measurement functions than I think we will ever need, and LXI Ethernet!
My only real complaint is that the "trial" features timeout based on the scope's "on time" not the time using the features. We won't have time to test most of them before the trials expire. (Yes, I know they are "hackable", but that's not the point.
Verified Purchase
Shier Solutions on
Aug 31, 2016
Recommend to a Friend
Hakko Digital Soldering Station
5.0
Hakko Digital Soldering Station is one of the best inexpensive soldering station out in the market. If you are looking for high quality soldering station with a low-budget, Don't think twice about it, get the Hakko FX888D-23BY Digital Soldering Station! look at me I sound like a infomercial it just shows how much I like it.
Verified Purchase
Garcia on
Aug 26, 2016
Recommend to a Friend
Great Soldering Iron
5.0
This was recommended to me by a car buddy. I purchased it for replacing about 25 capacitors in my car stereos amplifier. This made the job a pleasure, the temperature control is great. I would recommend this iron to anyone looking for a digital soldering station, you get a lot of iron for the $$.
Anonymous on
Aug 08, 2016
Recommend to a Friend
Fantastic Power Supply
5.0
This is a very impressive power supply. I love all the features which really set it apart from cheaper typical power supplies. You might also want to order test leads along with it. Some reviews around the internet complained about the dial knob but I see no problem with it and don't see why it was an issue. Very happy with my purchase. Working with TEquipment was a complete joy on this purchase. They were amazingly helpful, fantastic service !
Verified Purchase
Bryan on
Aug 03, 2016
Recommend to a Friend
Hakko FX-888D
5.0
This is my first Temp Controlled soldering station.
Took a few minutes to set some temp presets. Easy peasey!
The station is exactly as advertised.
Now you can purchase this station from many vendors but the price was great and more importantly, the customer service guy was outstanding. Customer service is important to me and I will go to TEquipment for my next purchase.
Verified Purchase
Thomas Vogt on
Jul 28, 2016
Recommend to a Friend
Great beginner's scope
5.0
Bought this at the recommendation of numerous other hobbyists and I've had some fun with it. Great tool for inspecting how bad your hobby hardware really is, and to explore how noisy different power supplies are in their output; I recently used it as a simple frequency counter to tune an antenna too.
Lots of features that I've yet to explore. Love the nice clear display.
Verified Purchase
Eric Brundick on
Jul 26, 2016
Recommend to a Friend
Outstanding Product
5.0
This is easily my favorite power supply of all that I have purchased.
Features I like:
1. quality and accuracy of output (very low noise),
2. the ability to (optionally) do a full power cut-off on over-current,
3. the default start-up mode with outputs being off (while you make adjustments) and then you can switch them on when you have the output(s) set as desired, and the ability to turn off the outputs while you make adjustments. Aside from the obvious circuit-board safety factor this provides, this also makes it undeniably safe to leave your equipment attached between sessions.
4. One thing I really, really like is its user interface -- probably best in the industry. While it is a good idea to dig into the manual and practice every operation, once you have done so, you will probably never need to refer to the manual again. Reason: the interface (button sequences, etc.) is very intuitive, and gets my highest compliments in that they have also managed to make it VERY DIFFICULT to use incorrectly. In other words, it is very difficult to do anything that would damage your circuit boards by accident. It is VERY easy and quick to get what you want.
Also, when you want a specific output setting, there are typically 2 or 3 ways to get it, and each method is intuitive.
Features I MIGHT change (undecided):
1. The layout of the numeric buttons in a circle is different. However, I have not found this to be annoying or encumber my use of this power supply in any way. Two things that I actually find NICE about this are:
a. the fact that they surround the adjustment knob, which makes for proximity of controls that provide alternate ways to achieve a specific output setting, and
b. the fact that I am MUCH LESS LIKELY to hit a numeric button that is very far away (value-wise) from the button I intended. In other words, if you want '8', it is quite difficult to hit '5' by accident. I suspect this is an intentional user interface design to reduce errors (which in the world of powering [sometimes expensive, prototype] circuit boards, is much appreciated by me).
If I was going to stock up a team of technicians with power supplies, this is the one I would purchase.
Verified Purchase
Victor Wheeler on
Jul 15, 2016
Recommend to a Friend
An Excellent Power Supply
5.0
I bought two of these power supplies. Initially one of the was faulty, but Rigol and Tequipment took care of it very quickly:) These ARE the updated DP832 power supplies. I bought these power supplies because I felt like that I would be getting a lot for the price. They are right there on that fine line between a cheap lab power supply and a very expensive one. They look amazing, they have a good amount of weight to them, the display is amazing as well. A total win.
Verified Purchase
charles remson on
Jul 14, 2016
Recommend to a Friend
Excellent Value
5.0
All I can really say is; WOW! This is a Terrific Value works Great. Packaging is tidy and Small enough to Carry on Planes and to Job sites. I now don't know how I got along without it. Thinking of purchasing another just for my Lab.
Verified Purchase
Kevin on
Jul 14, 2016
Recommend to a Friend
Great Scope from Best dealer - TEquipment
5.0
This is the best Entry Level Scope in it's class; I don't need to list the features, you can read them.
However, I would like to comment and thank the sales team at TEqupment - they are the best. It was simple, easy and fun buying from TEquipment. By far they had the best deal all over the internet. I highly recommend Rigol 1054Z and specially TEquipment. Thanks Guys :-)
Verified Purchase
Masood Raoofi on
Jun 16, 2016
Recommend to a Friend
Rigol DP832
5.0
I was looking for a hobbyist bench top supply and after a lot of research the Rigol DP832 seemed to offer the best value.
Verified Purchase
Christopher Rust on
Jun 15, 2016
Recommend to a Friend
Great product, Great service.
5.0
Rigol equipment has always been high quality and this power supply was no exception. Tequipment shipped very quickly and I will definitely be buying more equipment from them as soon as my wallet allows.
Verified Purchase
Jason Chamblee on
Jun 14, 2016
Recommend to a Friend
Works great
5.0
This is my first programmable power supply and I did not know what I was missing. It has a ton of great features. It powers up quickly which is nice.
Anonymous on
Jun 14, 2016
Recommend to a Friend
Excellent Quality
5.0
I have purchases a lot of equipment from Tequipment over the years and in fact, Tequipment is the number one vendor for Electronics Test Instrumentation for my Industrial and Medical Electronics lab.
I recently purchased the Rigol DS1054Z Oscilloscope and this piece of equipment far surpassed my expectations! Simply mind-blowing is the power and performance of this feature-packed product and at such an affordable price.
Future acquisitions for the bench will be Power Supply and an Arbitrary Waveform Function Generator and I am going with Rigol for these also.
Cletus Berkeley on
Jun 04, 2016
Recommend to a Friend
A great scope
5.0
I purchased this item as an upgrade from a cheaper USB/PC based oscilloscope. This unit is so much more functional than what it replaces:
1. quick access to a much larger number of measurements
2. working consistently -- no software issues
3. large number of trigger setup
4. larger buffer of data points at smaller time bases
5. faster to work with large buffers
The human factor of how an oscilloscope is used cannot be ignored. With a PC based scope the mouse is used for almost all functions limiting the possible interactions. With this unit many functions can be performed with one hand easily(e.g. single trigger) while using the other hand to work with a probe. The scope UI has very excellent shortcuts to make quick work of common functions (e.g. selecting horizontal/vertical cursor positions with the multifunction knob).
I am impressed with the value and performance of this instrument. I would recommend it to anyone who is looking for a scope.
Verified Purchase
Robin Caron on
Jun 03, 2016
Recommend to a Friend
No problems at all
5.0
Works great!
Jeff on
Jun 02, 2016
Recommend to a Friend
Excellent Entry Level Scope Shipped Fast!
5.0
First of all, I received this in two days with ground shipping. Wow!
The scope is excellent. I did not care about the other two channels until I used them all together. to see all signals from a project I am working on - microphone, opamp, Schmitt trigger, and timer - all helped me solve some timing issues so I am liking the four channels now.
The scope was easy to set up and use. Follow the directions for calibrating the probes. They are not factory set. This is my first DSO so I am having lots of fun. A huge step from my 1980~ B&K briefcase scope. It died and then so did my projects. I bought this because multiple reviews from EEvblog.com - Thanks Dave!
Verified Purchase
B Race on
May 26, 2016
Recommend to a Friend
Best value investment
4.0
I have been searching ebay, craigslist and other online marketplaces for almost a year for a good used scope that didn't require half of my workbench (nor 2 weeks' wages!) without luck. Most of the affordable ones available were older analog 2 channel, 20mhz or less (I already have an analog 10mhz tek 4 channel) and the digital scopes were either low specs and old, or a bit better performing but but high priced. I kept coming back and comparing to TEquipment.NET I even saw tequipment sells on ebay!
Finally decided on the rigol DS1054Z, and am still discovering new functions, like waveform storage, fft math, other math, etc,
Still learning the ins and outs of this instrument, but I don't think I'll ever use all the features. While I've run across some instances where a built-in signal source or even a MSO would come handy, I'l make do with the 4-channel (for now)
The instruments' design and appearance is wonderful, the buttons have a nice soft nonslip texture, screen is very sharp and shows clear waveforms.
Now for the bad:
Fan is noisy, and I can see where it will get to be annoying if I used it more.
The two blue colored channels are too much alike. One of them should have been a different color.
Both these negs could be easy fixes: fan should not have made it into the box, as loud as it is, and a firmware update should take care of the channel color. I look forward to seeing this color change update in the near future, as I'm sure I am not the first or only one to complain about it.
All considering, Nothing I've seen on the market (used or new) comes close to matching this value, and I have no qualms recommending this scope for hobby use or even light industrial use. A BEST BUY for sure.
mitim on
May 20, 2016
Recommend to a Friend
DS1054Z
5.0
My new DS1054Z arrived within 4 days of placing the order. I also ordered Kit 1, which also arrived at the same time. The scope arrived in great shape and when fired up for the first time, was in great calibration with all options functional (free for 36hrs.). The only calibration needed was to compensate the 4 probes (not unexpected). I recommend this scope as an entry level scope. The price to feature ratio is outstanding.
Verified Purchase
Mark on
May 17, 2016
Recommend to a Friend
DS1054
5.0
The scope works beautifully and is a pleasure to use. Unbelievable for the price.
KDR on
May 14, 2016
Recommend to a Friend
Bang for the buck
5.0
First, excellent speed in shipping. Upon opening and unboxing, I noticed the oscilloscope was heavier than I expected, and smaller I got the scope hooked up, powered on and went through the menus. this is going to be an excellent addition to any home or hobbiest's work bench. Its compact size lends itself to smaller benches but still is packed full of features. an excellent buy.
Verified Purchase
Ryan Meldrum on
May 10, 2016
Recommend to a Friend
Professional quality, hobbyist price
5.0
I've used Keysight/Agilent, Tek, Fluke, etc. test equipment for decades and had some bad experiences with low-priced import brands, so I was surprised upon receiving the Rigol DP832 how well it was constructed, the clarity of it user manual, and its overall quality. An excellent value and great performance! I will consider Rigol for all future equipment needs.
SparkyStublength on
May 05, 2016
Recommend to a Friend
Get One
5.0
This is the first temperature controlled iron I've used. Compared to the popular 'power' controlled iron I was using: this is twice as expensive and infinitely better! Heats up in less than a minute, with temperature read-out. The default 750 deg F quickly does joint after joint without waiting for the temperature to rebound. When you set it aside hot for a while, there is with very little oxidation on the tip - i.e. it does not overheat when idle. Only suggestion I can make, besides GET IT, is to also get the 1.2 mm tip for through-hole circuit boards.
Verified Purchase
Howard Matthews on
May 03, 2016
Recommend to a Friend
Very nice scope with lots of features
5.0
I used an oscilloscope with my job many years ago. At the time, it would have been very cost prohibitive for a hobbyist to own. After retirement, I began playing with electronics again and had a need for an oscilloscope. I read many reviews and on a recommendation, I went to the TEquipment website and had a chat with a sales representative. She recommended the Rigol 1054Z. It was priced right and was shipped quickly. The scope capabilities are far more than the Tektroincs scope that I used before. I'm very happy with the capabilities and the support I got from TEquipment.
kbellco on
Apr 29, 2016
Recommend to a Friend
Cant beat for the price!
5.0
After looking at a few scopes, the 1054z cannot be beat for value or performance. To get a 4 channel scope like this in this price range in astounding. Highly recommend the 1054z for a good all around quality scope.
Verified Purchase
Justin on
Apr 24, 2016
Recommend to a Friend
Fantastic for $400.
5.0
I bought this about a year ago for recording capacitor discharge on a 72.5kV circuit breaker. I've had many digital scopes over the years starting with a Nicolet Explorer III , various Tektronix scopes, and this is the best. The noise immunity is fantastic. We are measuring up to 100kA discharges at about 120kHz, and as long as one is careful with grounding the scope performs super well. Most scopes don't doo well in high voltage (large dv/dt), and High current (high di/dt) environments. 2 years earlier I bought a 2 channel TENMA scope ($369) which works but the screen is hard to read and the manual is impossible.
The Rigol manual is of the best ever. The English is great and all the details are explained well.
I figure this is a "loss leader" to get folks hooked on such a great scope. Getting the data out is quite cumbersome. I believe it is probably easier on the higher priced models. It would be nice to have isolated inputs with no common "ground" probably available for more $$ also a lithium battery powered version would be good. sometimes the 1500V isolation transformer isn't enough and a totally floating scope would be useful. I can run it for 50 minutes with an inverter powered by a 14.4V NiCad drill battery (3AH size) the inverter pulls about 3.5A
So improvements for me:
1) More direct I/O capability to store wave forms as .xls format with scaling etc.
2) internal battery for 2 hour operation (minimum)
3) fully isolated inputs to withstand 1kV between input "grounds"
my company paid 10k$ for a Tektronix with 4 channels and a whopping 30k of memory per channel. yes that was 25 years ago. Really for $400. this is a super bargain. I don't need more than 50MHz bandwidth, but the other features I mentioned would be nice. Grace & Peace Roy
Roy Alexander on
Apr 23, 2016
Recommend to a Friend
Great value
5.0
A pleasure to use. Seems to have excellent build quality and very precise when checked against my other bench equipment. Has more options than I can foresee ever needing really. Great value for the price even when compared to the cheapest stuff on the auction sites. It's almost fun to use. Really impressed with the value of Rigol products so far.
Tjinla on
Apr 21, 2016
Recommend to a Friend
Great Beginners' Scope
5.0
This is my first oscilloscope and I'm still learning how to use it to its fullest extent, but I've been very pleased so far. The features and quality you get for the price are unbelievable.
Verified Purchase
John Langston on
Apr 18, 2016
Recommend to a Friend
Great scope for the price
5.0
Great scope for the price. Easy to use USB interface for LabVIEW automation.
Verified Purchase
Steven Donaldson on
Apr 11, 2016
Recommend to a Friend
Rigol DP832 w/Hi-Res Option
5.0
In my energy research, I had a problem with a Tek PS2520G power supply that could not handle negative energy being fed back to the supply from a pulsed rotating electromagnetic field device and decided to purchase the Rigol DP832 after reading it's reviews. The supply performed flawlessly and handled the reverse energy perfectly. I also find the power output display convenient as well as all the display options. I am so impressed with the DPDP832, I would purchase another is needed!
Jon F
Jon F on
Apr 11, 2016
Recommend to a Friend
Rigol DS1054Z
4.0
A very good scope. I had a brand new Tektronix EDU series 70MHZ. But due to its low memory(2,5KPTS), the waveforms captured were not accurate. This Rigol, has 24MPts optins, wich i have, and the Ultra vision feature, that delivers a very good waveform in the screen. For a entry level scope, i think is enought for me.
Flavio on
Apr 08, 2016
Recommend to a Friend
amazing scope for the price
5.0
I have been out of electronics for a few years and I am now starting to get back into audio and arduino/raspberry pi projects. This scope was a GREAT buy for the price and it works wonderful. I use it to check my tube amps for channel consistency. Also to do SPI/I2C on my raspberry pi/arduino projects. I would highly recommend this scope for a beginner or someone like me who is just getting back into electronics after a break.
Verified Purchase
John Adams on
Apr 06, 2016
Recommend to a Friend
Amazing Product for the price!
5.0
This product is compact and powerful. This is exactly the kind of product I was hoping to buy at 5 times the price I paid for this model. Couldn't be happier.
Verified Purchase
Edwin Fetzer on
Apr 05, 2016
Recommend to a Friend
Dp832
4.0
Great power supply for the price, very user friendly
Verified Purchase
Anonymous on
Apr 04, 2016
Rigol DP832
2.0
Bought this specifically for the LAN control but it doesn't do LAN commands well, IMHO. Too fast and it hangs up the instrument. Does not appear to conform to the IEEE commands it supports, namely "*OPC?" for synchronization. One is supposed to be able to issue this command and wait until the instrument completes all previous commands, but the DP832 sees this and others (sometimes) as an invalid command,. Appears to need arbitrary time delays between commands, some times, so one is never sure if you've added enough delay. This leads to too slow scripting and erratic faults so never sure if a long scripted measurement will work or not.
Tequipment Response: The DP832 (with the interface option to enable LAN communication) is commonly used both for benchtop front panel operation and remote automation. Regardless of whether the program is using LXI, USB, or GPIB we recommend adding delays on the order of 100-200 milliseconds between commands. Because of the standard time in which a DC power supply responds and services these requests we find that to be sufficient a majority of the time. Certain commands such as creating or editing sweeps or saving and recalling setups can take longer and care should be taken. The *OPC command is supported and can be used, but should only be used for certain asynchronous operations. Sending repeated *OPC commands every 10 milliseconds to see when it is ready can overwhelm the buffer service just like sending other commands too quickly. Given the speed and capability at which the DP800 series set and measure voltages and currents one can fully utilize its capabilities with a delay set between commands.
DanS on
Apr 04, 2016
Recommend to a Friend
Great scope for the price
4.0
Pretty much cannot be beat in this price class. Four channels is awesome. You will not be able to go back to only two. My last scope was analog. Going digital takes a bit of getting used to--a *lot* of functionality is buried in layers of menus. Download the REAL manual from rigol--the one that comes with the scope is very sad :(
Verified Purchase
Randall McRee on
Apr 02, 2016
Recommend to a Friend
RIGOLDS1054Z
5.0
This is going to be a short review because there is not a single dang thing I can say negative about this scope. It's awesome, has every feature you could possibly ask for unless you make a living using one and Tequipment was simply hands down quick, professional, and courteous. Shipping was only 2 days. AWESOME, just plain AWESOME.
Frank on
Apr 01, 2016
Recommend to a Friend
Rigol DS1054z DSO
5.0
Received my Rigol on Friday in good condition. Found the instrument to be well built (considering the cost and application) and functional. First day found one of the problems in the hardware I've been trying to figure out. The I2C decoder is great (too bad I've used a chunk of the trial period.) Very nice piece of equipment. If you are doing any work with the small micro controllers and hardware, you will need one of these on your bench.
Verified Purchase
Jack Wilborn on
Mar 26, 2016
Recommend to a Friend
FX-888D
5.0
Excellent Soldering station for the price. Very responsive and well made. TEquipment has great prices and makes the ordering process easy.
Verified Purchase
Multer kevin on
Mar 23, 2016
Recommend to a Friend
DS 1074Z - What a great value!!
5.0
This is the easiest yet sophisticated scope with the most features out there. Incredible value! Thanks!
Verified Purchase
don peters on
Mar 16, 2016
Recommend to a Friend
Very good Power Supply
5.0
Very good value.
Being able to set the max ADJUSTABLE current or voltage is a great idea. Now you don't have to worry about having a senior moment and over adjusting the setting output by mistake when you are working on sensitive devices.
Verified Purchase
Joseph Torelli on
Mar 14, 2016
Recommend to a Friend
What more could one ask for @ 2X the price.
5.0
I am coming at my review from the angle of an analog scope user. I am comfortable using analog scopes and wasn't sure if upgrading to a modern, more complex and feature rich scope would lead to a noticeable improvement or enhanced workflow. I was wrong. It is dead simple to use for even a beginner (with excellent help menus for nearly every function, button and measurement capability) yet stocked full of advanced options for the experienced engineer. It comes with FOUR 150mHz passive probes (a real bargain especially at the asking price), fully functional USB and Ethernet ports and a solid users manual.
I cannot imagine a more feature packed, well built, upgrade able oscilloscope with performance matching much more expensive units. The display is bright with clear text and easily viewable from most bench top angles. The supplied probes or better than expected, flexible and well constructed. Did I mention you get FOUR included with your purchase?
The key factor with any piece of test gear is performance. That is an area well handled by the Rigol DS1054Z. During my initial use of the scope I found it to be accurate and reliable with repeatable results. It is simple to use with reliable results and comes with an extensive onboard help menu for nearly every aspect of the oscilloscope and its operations.
I do not often write reviews but when I do it is for something I feel strongly about. If you are looking for a well featured, reliable and accurate oscilloscope but can't justify spending $1000 or more on one I wouldn't hesitate in purchasing the Rigol DS1054Z.
Bad Hair Audio on
Mar 12, 2016
Recommend to a Friend
Rigol OSCOPE
5.0
Awesome little scope!
Verified Purchase
Cody Campana on
Mar 11, 2016
Recommend to a Friend
Rigol DS1054Z
5.0
Excellent scope. I am a relative beginner to digital electronics and this scope seems to be perfect for my needs. It works exactly as advertised. The build quality of this scope is fantastic......
Verified Purchase
Charles Daniels on
Mar 11, 2016
Recommend to a Friend
Banana Plug Don't Fit Positive terminals
4.0
Great product. The only complaint is the tolerance of the Positive connector. For some reason my Elenco banana plug fit on the negative terminals but not the positive. I am not sure if this is by design or just parts that are too tight.
I would still recommend this product.
Michel on
Mar 09, 2016
Recommend to a Friend
Great soldering station!
5.0
Great soldering station for the price. This is my second Hakko. I also have the analog station which I purchased quite a few years ago. Pick up some different tips and you can do just about anything with this iron. Nicely made unit.
Mike on
Mar 08, 2016
Recommend to a Friend
Hakko Rocks
4.0
Great soldering station. Great features. Should last decades. Only four stars because my original Hakko 926 is still going strong after 20 years (but the 926 is no longer available). You can't go wrong with the FX888. Worth every penny. I could have got this at my local store, but Tequipment.net had the best price, by far, and fast shipping. Thanks Tequipment.net!
Verified Purchase
teamSMITHusa on
Mar 03, 2016
Recommend to a Friend
rigol 1054Z
5.0
Excellent O scope, have only used it for 3 days and it works perfectly. most utility for the money you can buy . Wish it had bigger screen fonts.
Verified Purchase
mack frost on
Mar 03, 2016
Recommend to a Friend
ICE,Inc Hakko FX888D-23BY
5.0
Added the Hakko FX888D-23BY soldering station in with our two older Hakko 926 stations. Our long time preference has been Hakko's.
They have excellent heating element and tip life, fast accurate heat. Proper tip selection handles lead free solder nicely. Hand piece is cool operating when on for long periods. Our Hakko's have far outlived any of the other name brands we've used in the past.
Richard Misturak on
Mar 02, 2016
Recommend to a Friend
Great addition to my bench
5.0
If you are in the market for an easy on the pocket quality oscilloscope, this is it.
Verified Purchase
Joe C on
Mar 01, 2016
Recommend to a Friend
ICE, INC, Rigol DP832
5.0
We added the Rigol DP832 programmable output DC power supply to our electronics test bench. Not only was it a great addition, it was a great subtraction; getting rid of a dual 12 vdc, and two 24 vdc chassis type power supplies and all the associated fuse contraptions for low current protection. The Rigol unit is rock solid with clean power ; fast and easy setup. We make use of the over current limiters for fragile 4-20ma (32ma limit) analog loop development.
Verified Purchase
Richard Misturak on
Feb 26, 2016
Recommend to a Friend
Great scope for the price
5.0
Great little scope with lots of features (like math operation functions). Very easy to work with due to side buttons menu controls. Beats my old (1980's)Tektronix hands down. Some great functions are optional though (meaning they have to be purchased separately) like wave recording/playback. Overall, so far (I have it for about a month), I like it a lot.
Edward on
Feb 23, 2016
Recommend to a Friend
Best Bang for your Buck!
5.0
This scope has proven to be the best value in test equipment for me. This scope is full featured, and relatively easy to use in the price range.
cjurczak on
Feb 19, 2016
Recommend to a Friend
Great scope
5.0
I have purchased 3 oscilloscopes, 1 DC power supply, and 1 signal generator during the past year from TEquipment; all Rigol and we could not be happier with the quality and value. I am a volunteer adviser in our school's STEM education club where our students learn about subjects such as robotics, electricity\electronics, and aeronautics. Our latest equipment purchase was the Rigol DS1054Z oscilloscope. It is perfect for us and will be a very good addition to our students' technical education resources. We would like to recognize the TEquipment staff too for their outstanding sales and support.
Verified Purchase
GSMCS on
Feb 18, 2016
Recommend to a Friend
Rigol 1054z
5.0
I purchased this to replace my Rigol 1052E. TEquipment had it in stock, I ordered it and received it three days later with free shipping. It surpassed the already high expectations I had for this scope.
Verified Purchase
John Ellinger on
Feb 17, 2016
Recommend to a Friend
Rigol digital oscilloscope
5.0
Products are good quality and customer service is great!
Verified Purchase
Serge Vallve Monrose on
Feb 16, 2016
Recommend to a Friend
CEO SaviCorp
5.0
Great service
Great price
Great quality
Serge Monros on
Feb 15, 2016
Recommend to a Friend
Best bang for the buck
5.0
This power supply is worth three times it's cost, compared to more well known brands.
It's only issue is a relatively high impedance between the common grounds of CH2 and CH3, so if current sinks from one channel to the other, voltage regulation is affected. Easily solvable though.
Verified Purchase
mizvekov on
Feb 12, 2016
Recommend to a Friend
Great Scope for the price
5.0
I bought this scope (Rigol DS1054Z, 4 channels, 50MHz) as a second scope, for an associate to use in helping me develop an embedded product. My other scope is an Agilent DSOX3014A (4 channels, 100MHz). The Agilent is certainly the better scope in some respects, but the Rigol seems to come close in many respects. Given the serious cost difference (the Agilent list price is now about 10x what I paid for the Rigol), the Rigol scope seems to me to provide much more value/$. For most of my applications, the Rigol scope is very adequate.
Some pluses: Both LXI and USB interfaces are included.
A fairly intuitive interface. A good-size screen on a relatively small enclosure. Good memory depth. Four nice looking probes with 1x/10x selection (my Agilent only came with four 10x probes; I prefer the Rigol probes).
A few cons: Apparently there is no real-time clock, so files all are saved with a default date/time, which makes it harder to track the screenshots, etc. Trace colors include dark blue and light blue (rather than blue and green), seems somewhat of an odd choice of colors. No way to upgrade to a mixed-signal scope. Other upgrade options are rather limited compared to the Agilent scope.
Conclusion: For the price (I paid $399), this is a great scope. If its advertised features are all you need in a scope, I don't think you'll be disappointed.
Thomas on
Feb 11, 2016
Recommend to a Friend
Rigol power supply
5.0
This device is really nice and works just like you'd expect. I own a single position variable power supply but it doesn't hold a candle to this guy. The operation of this device is particularly easy. Being able to easily set both voltage and current will help me to not blow up so much stuff when I'm tinkering with my electrical projects.
Verified Purchase
John Westerman on
Feb 10, 2016
Recommend to a Friend
Great !!
5.0
Great scope. Very will put together. Every thing seems to work. Not throwing away my TEK 2565B, but this guy does things that one does not do. It's a lot easier to lug around as well.
Verified Purchase
Bob Camp on
Feb 05, 2016
Recommend to a Friend
Solid scope and a steal for beginners
5.0
Beginner electronics enthusiast? This scope is for you. You simply can't beat the price for the capabilities offered in this package.
Verified Purchase
Kevin Neubauer on
Feb 05, 2016
Recommend to a Friend
Excellent buy, but please include extra software
4.0
Very good 'bank-for-the-buck'. Still learning the capabilities of the scope, but most are fairly intuitive. Small size makes the unit very easy to move. Screen more than adequate to see display. 4-channel improves flexibility of scope significantly for more complex monitoring tasks.
I am a little disappointed that there are quite a few 'software' capabilities that are not included with the scope. You get a short time window to look at the capabilities before loosing access to them. Purchasing these extra's could cost more than the original purchase price.
Steve M on
Feb 04, 2016
Recommend to a Friend
Awesome Value
5.0
This oscilloscope is a really great value. Four channels, 12 Mpts of trace memory, 30,000 waveforms/second, and 1 GS/s sampling. It has a good weight too. Heavy enough but not too heavy. I don't know what is inside that gives it the weight, but it feels good. A really solid scope that I would highly recommend.
greg on
Feb 03, 2016
Recommend to a Friend
Simply the best scope for beginners,
5.0
I bought this scope with many recommendations from Dave's eev blog, and it has been a pleasure from the first moment. Great scope, easily hackable to 100 mhz(just google hack and ds1054z) many functions and math options imho for its price simply the best in this class period. You will not regret it.
Verified Purchase
Kees Hessels on
Jan 30, 2016
Recommend to a Friend
Excellent
5.0
Received this item very quickly, very happy with TEquipment service and shipping.
Product is excellent. I bought it to replace an old Weller soldering station which I've had for years. This is definitely an upgrade. Heats up quickly, holds temp, Soldering pen and tips are very nice. Would definitely recommend to anyone looking for an inexpensive but great performing station.
Verified Purchase
Robert Privitere on
Jan 30, 2016
Recommend to a Friend
Best performance/cost around
5.0
The value without any mods is good already.
Look around the web to know what else can you get with this scope.
Anonymous on
Jan 25, 2016
Recommend to a Friend
Great oscilloscope
5.0
The best oscilloscope for the price, great delivery service and support app. I recommend buying from tequipment.
Miguelangel Lopez on
Jan 24, 2016
Recommend to a Friend
Effective scope with all the right stuff
5.0
The scope has an awesome large LCD screen, which is the best part. The controls make sense, although they are bit too tightly packed due to the screen size. Not having individual vertical and horizontal adjustments for each channel is a bummer; you get used to it though. The measurements features are easy to use on the left side of the screen. The Ethernet/usb connection is great. You can use it to take screenshots and save right on your scope. I used the waveform counter a lot for testing, although it is a bit slow and doesn't count the complicated waveforms I use. If you have simple pulses, etc. it will count well at certain settings. I reported a waveform count glitch and the engineer at Rigol was responsive and sent me beta firmware to test. They eventually solved this bug that was overflowing my count, rendering it useless. For the price, it rocks!
Anonymous on
Jan 23, 2016
Recommend to a Friend
Nice Scope
5.0
REc'd my scope, works as well as I can run it. Recommend it.
Verified Purchase
Mark Johnsen on
Jan 21, 2016
Recommend to a Friend
Great oscilloscope for the price!
5.0
Everything was as good as I expected, great support chat app, the delivery was sooner and the product just as described. Great big screen and lightweight. I do recommend to buy it from tequipment.
Miguelangel Lopez on
Jan 20, 2016
Recommend to a Friend
Great oscilloscope for low price
5.0
The DS1054Z is a nice entry oscilloscope for beginners and even advanced users get much functionality for a very low price. As mosz of the basic oscilloscopes have only two channels, the four channels on the DS1054Z are a great help if you want to decode protocols. But the buying option for the serial protocols is way to expensive.
Verified Purchase
markbee on
Jan 19, 2016
Recommend to a Friend
Works as advertised
5.0
Works as advertised.
Verified Purchase
Electrical Engineer on
Jan 18, 2016
Recommend to a Friend
Awesome power supply
5.0
This is a very versatile programmable power supply. Great build quality!
Verified Purchase
LeoUCDavis on
Jan 16, 2016
Recommend to a Friend
Great unit!
5.0
Can't beat it for the price! TONS of bang for the buck!
Verified Purchase
borgdanceparty on
Jan 13, 2016
Recommend to a Friend
Best little scope on the net
5.0
Check any EE hobbyist on YouTube and you will see this scope. It cannot be beat at the price and will meet the needs of audiophiles, Hams and IoT inventors alike. The perfect complement to my Rigol function generator.
Verified Purchase
TeslaPunk on
Jan 05, 2016
Recommend to a Friend
Nice scope overall
5.0
I have used the scope for basic measurements so far, mostly audio signals and comparisons of such signals. It works well and the construction is as good as that of expensive top-brand items. The packaging was adequate and protects the instrument well. RIGOL has tried hard to pass themselves as a decent company to buy equipment from and they have succeeded, at least with this scope. I have used lots of lab equipment for many years in college labs and this would fit perfectly in every lab, given its low price, specifications and support. Highly recommended for tight budgets and high expectations. :-)
DrF on
Dec 31, 2015
Recommend to a Friend
This PSU rocks!
5.0
Best value for the money.
suhl on
Dec 28, 2015
Recommend to a Friend
Brilliant beginners scope
5.0
Doesn't get better than this. A 4 channel scope for under $400. If you are in the market for a new beginners scope, don't even think twice, just buy the 1054Z. You will not be disappointed.
Verified Purchase
Vibhor Chowdhary on
Dec 25, 2015
Recommend to a Friend
DS1054z
5.0
Really great oscilloscope. Great price.
Verified Purchase
Allen Heim on
Dec 24, 2015
Recommend to a Friend
Solid smart and stable PSU
5.0
Well, try to find PSU close to Rigol DP832 in abilities and comparable by price AND with same reliability... I bet you'll be unable to.
Numeric keyboard is surprisingly comfortable to type values, information displayed is clear and interface has almost no learning curve.
You can upgrade this PSU to same precision as almost twice expensive DP832A, add LAN and monitor/analyze and then think hard how to utilize all that stuff =)
Since overheating issues fixed with revised version (I think it's been 2 years since then) - it's time proven reliable and precise PSU capable to handle all needs for home or repair lab.
Rigol - still the best in mid-range price segment!
P.S. And you don't want 832A because it has different way of displaying information. Trust me. Colored buttons and messy UI don't worth extra $350.
Verified Purchase
Ilia Sharin on
Dec 23, 2015
Recommend to a Friend
Great scope for the money
5.0
This scope is very nice for the price. It includes 4 scope probes that are decent and has the capability (if upgraded) for decoding UART, SPI, and I2C. Can't beat the value of this scope at this price point.
Verified Purchase
Keith on
Dec 22, 2015
Recommend to a Friend
Hakko 888d Soldering Station
5.0
We gave one of these to our son last year for Christmas so now I've actually purchased two! My husband is a technician at Lockheed Martin and uses this product at work so he wanted one for his home workshop and requested this. The quality is top-of-the-line and is a nice compact size.
Verified Purchase
Kerry Atkins on
Dec 15, 2015
Recommend to a Friend
Good entry level scope
4.0
These are good low cost entry level scopes. The interface is responsive if a tad slow. Probes are okay quality, but nothing to write home about. Four channels is a great plus as compared to only two as in most scopes. Wish Rigol had included a 10x probe detection ring around the coaxial inputs, but at this price point they are excused for not having included it.
Verified Purchase
Gustavo Fernandes on
Dec 10, 2015
Recommend to a Friend
Nice scope!
4.0
This little Rigol is a really nice general purpose scope! Works great, easy to use. lots of features for the price! One minor quibble is the small screen legends.
Seems to be really well made, and feels substantial. Tested on my scope cal equipment, and easily exceeds the specs!
Verified Purchase
Robert Koller on
Dec 08, 2015
Recommend to a Friend
DS1054Z A great low cost scope.
5.0
I've found no major problems with this scope. Some awkward wording on display prompts (chinglish). Same with the instruction manual. Other than this It's been great!
Also, It comes with four probes.
When inputting the feature registration codes use Ultra Sigma. It's much easier than typing in those long numbers using the scope knobs.
Verified Purchase
Luke Mester on
Dec 08, 2015
Recommend to a Friend
DP832 triple output power supply
4.0
This is a precision triple output power supply. It has 2 independent 0-30 volt outputs and one 0-5 volt output.. The middle 0-30 volt supply is not isolated from the 5 volt supply. This will probably never cause a problem in my case.
I like the corner bumpers which allow me to stand the power supply on end instead of setting it on a table if the situation merits it. This unit is upgradable to one extra digit if it is useful to you. The upgrade should be less than $100.00 US$. Too many features to mention. The only thing so far that Rigol could improve on this is to make the adjustment control knob stick out more so that you are not wheeling it around with your finger. Other than that the supply seems to be a very good buy for the price!
Verified Purchase
DenL on
Dec 04, 2015
Recommend to a Friend
My New Scope
5.0
Bought my DS1054Z as a replacement for a conventional 50 Mhz scope , and couldn't be happier.The DS1054Z is excellent value for the price. Small in size, it has cleared up a lot of bench space and is in daily use now.
Ned Kay on
Dec 03, 2015
Recommend to a Friend
Rigol DP832
5.0
I've had this power supply for a couple of days, and I can say that I'm very happy with it. It does everything I could ask for in a unit at this price. It has a very friendly interface, allowing multiple ways to adjust voltage/current set point.
It's worthwhile to note that this unit has a color LCD screen but the interface is monochrome. It would have been nice if the three outputs were color-coded, but I guess that is a distinguishing feature of the DP832A, the higher-end model.
Overall, I would definitely recommend this power supply.
Verified Purchase
Braeden on
Dec 02, 2015
Recommend to a Friend
Great overall value and best bang for your buck!
4.0
This scope (DS1054z) is worth much more than the price tag shown.
The fact it has 4 channels, numerous math functions and triggers speaks for itself. It has a decent noise floor and noise reduction techniques like averaging but unfortunately only has a one BW limiting function.
Some of the best features are as follows:
4 analog channels
USB storage
advanced trigger settings
AC/DC/GND coupling on all ports
Math functions (FFT/Digital/arithmetic)
12-24MPt
Very portable
intensity grading
record/replay function
and so much more!
If you are a beginner in electronics or an EE like me wanting to do home projects and you don't have a scope yet... This is the first one you should buy. And you might say 4 channels is a bit much, let me tell you I didn't think I'd need all four but it makes debugging go much, much quicker. It's a steal with that $400 price tag because it's worth so much more.
Verified Purchase
Nicco Horvath on
Nov 29, 2015
Recommend to a Friend
Solid and stable
5.0
At last, a power supply that just works perfectly every time. Love the accurate built-in metering. The interface looks a bit odd at first, but is actually pretty user-friendly.
Verified Purchase
Captain Kirk on
Nov 25, 2015
Recommend to a Friend
Awesome Soldering Station
5.0
I have been using this soldering station for a while now. This thing heats up FAST! It is worth every cent. You can be soldering all day and you won't be burned. It always stays cool at the handle. It is easy to change tips and setting the temperature its easier.
I would recommend buying this, is it built with great quality and definitely will last you al long long time.
Verified Purchase
Kamel Kafati on
Nov 25, 2015
Recommend to a Friend
Soldering station
5.0
Great piece of equipment at an excellent price!
Terry on
Nov 24, 2015
Recommend to a Friend
Awesome Product and Great Customer Service..
5.0
I got this a while ago and it's an awesome product and Tequipment is one of the best companies around to buy and deal with case of a problem..
Verified Purchase
jason on
Nov 18, 2015
Recommend to a Friend
Awesome Product and Great Customer Service..
5.0
I got this a while ago and it's an awesome product and Tequipment is one of the best companies around to buy and deal with case of a problem..
Verified Purchase
Anonymous on
Nov 18, 2015
Recommend to a Friend
Rigol DS1054Z has a few minor quirks.
5.0
A very good value for the money.
However, the colors for the 4 channels... Yellow, light blue, and Pink, OK, but dark blue for channel 4! Did they run out of green?
Also, it has roll mode for slow scan rates, but has to be manually switched to that mode. Every other DSO I have used automatically changes to that mode with slow timebase settings.
Kevin Clark on
Nov 17, 2015
Recommend to a Friend
Rigol DS1054Z Oscilloscope
5.0
Exceptional value for the money. Work as advertised.
Verified Purchase
Albert Peacock on
Nov 12, 2015
Recommend to a Friend
Good Value for a Programmable Bench Supply
5.0
I just received my DP832 a couple of days ago. It arrived double-boxed in two sturdy, close-fitting double-walled cardboard cartons, with ample fitted padding to survive the worst punishment it might receive in transit. I wish that more products were packaged so well for shipment.
I had no trouble bringing up remote control over USB from my Mac using python-usbtmc and python-ivi, both of which are available at Github. Note that license keys are required to enable remote control over Ethernet. After entering them (a somewhat laborious process), it was easy to bring up network remote control using python-ivi and python-vxi11.
I would have preferred a traditional rectangular arrangement of number keys over the odd circular arrangement, but that's really just a nitpick. Entering voltage and current settings is easy using either the encoder knob or the keys.
The "All on/off" button turns off power with a single push, but turning power on requires a confirmation on the menu keys under the display. That surprised me a bit based on experience with other programmable supplies which don't require the confirmation, but it's probably a bit safer. Turning individual outputs on or off just requires a single push of their dedicated on/off keys.
Overall, I think this power supply is a good value.
Verified Purchase
NF6X on
Nov 12, 2015
Recommend to a Friend
hakko
5.0
excellent product. took a little long for shipping, must have been on back order.so far was worth it.
Verified Purchase
Daniel Mertowski on
Nov 07, 2015
Recommend to a Friend
Awesome Oscilloscope! Great for prototyping
5.0
Simple to use. Great display, tons of functionality. Highly recommended.
David A on
Nov 05, 2015
Recommend to a Friend
Best scope for the money!
5.0
Everything a home hobbyist could want in a scope and more, at a price a home hobbyist can afford. What else could you ask for?
Verified Purchase
Marc Strickland on
Nov 05, 2015
Recommend to a Friend
Good value
4.0
I have put the Rigol DP832 through a series of test/evaluations and find it good in all respects. It is easy to use, quite accurate and should suit almost everyone's needs.
The software is not top-level, but is useful; I had to export data to a csv file, which opens in Excel, to determine the energy (power x time) used by an LED array that I evaluated.
One minor nit is the additional cost for more accuracy and other features; but this seems to be the way of much current technology.
Verified Purchase
Charles Schuler on
Oct 30, 2015
Recommend to a Friend
really nice scope
5.0
This was my first Digital Scope and I really like it. I will probably never use all of it's capabilities, but it is nice to have 4 channels and the big screen is easy to read. the price was very good and Tequipment shipped it fast.
Verified Purchase
Richard Keller on
Oct 30, 2015
Recommend to a Friend
Quality Iron
5.0
Added this iron to a fleet of Hakko 936/908 Irons. Mixed feelings, Iron works great but the digital is a little cumbersome to change the temperature setting. Will be perfect for less skilled workers that shouldn't be adjusting the temp.
Steve on
Oct 28, 2015
Recommend to a Friend
Great workstation in a small package
5.0
This station has it all: simple controls, quick warm-up, and a low price. A great addition to my workbench!
Verified Purchase
Nick from DC on
Oct 25, 2015
Recommend to a Friend
HAKKO FX888D-23BY
4.0
Awesome product, my only problem, it was difficult to understand the preset settings after that though everything is good. If you want a great soldering station this is it.
Tom on
Oct 16, 2015
Recommend to a Friend
Rigol 1054Z Scope Delivers as Promised
5.0
I saw the review for this scope on EEVBlog, and was impressed with the feature list, especially when seeing the price. After receiving the scope and a few days exploring the functionality, I am happy to say that I am very pleased with this purchase!
Verified Purchase
Chris Laffoon on
Oct 14, 2015
Recommend to a Friend
Rigol DP832
4.0
Unit arrived in a timely fashion. Have had no problems with it. Engineers are happy with the product.
Verified Purchase
karen on
Oct 12, 2015
Recommend to a Friend
Rigol Power Supply
5.0
This product is perfect for a small engineering operation. Easy to use, outputs are right on the money.
It is big and heavy and does not have any connectors for the outputs. Other than that, I really like this product!
Verified Purchase
Kevin Cook on
Oct 09, 2015
Recommend to a Friend
So hot, so fast
5.0
This solder station is exceptionally well functioning. It heats up from room temp to 899? F in about 45 seconds. The thermal recovery is great and it only took a couple of days for delivery with the free shipping.
Verified Purchase
Joshua Condict on
Oct 07, 2015
Recommend to a Friend
perfect oscilloscope for the price
5.0
the oscilloscope is awesome, best price/quality ratio. documentation is accurate.
Verified Purchase
Christophe Guittard on
Oct 04, 2015
Recommend to a Friend
Hands Down the Best!
5.0
If your looking for a sub $1000 dollar scope and have seen some crap. Do not skip this one due to the price. I have seen reviews from the EEVBlog and other various you-tubers raving about this scope. It is truly the best entry level scope you can get your hands on.
Verified Purchase
Chris Oakley on
Oct 02, 2015
Recommend to a Friend
Awesome!
5.0
I have been using this for the last few days and it has been awesome. It was easy to setup and start using right away. Also it has been the most stable power supply I have ever worked with.
Verified Purchase
Chris Oakley on
Oct 02, 2015
Recommend to a Friend
Rigol DP832
5.0
Have had this unit for about nine months and it has been working great. It is easy to use. Was a little worried about the circular numeric input being a little goofy but works fine. The power supply has nice logging features. For example, you can attach a USB thumb drive and have the power supply log voltage and current every second (you can choose the log rate). Feature works great, however, output is a little cryptic. Rigol does provide a documentation sheet to make sense of the ROF (data log file). I submitted a request to Rigol saying that it would be nice to have a Windows program to parse the data. Rigol says they are working on it. Rigol did supply an Excel spreadsheet to help deocode the data. A nice supply.
Verified Purchase
Dan on
Sep 28, 2015
Recommend to a Friend
Just buy it!
5.0
This seems to be "the" value buy for a great consumer-level scope. Easy to use, great screen, super help menu, and the pricing is so low. You would twice this amount just a couple of years ago. Go for it.
Verified Purchase
Mike Rivera on
Sep 28, 2015
Recommend to a Friend
hakko fx-888d
5.0
Very well built soldering station. Highly recommended.
angel l torres on
Sep 27, 2015
Recommend to a Friend
Quality Station
5.0
I got this with the 4 extra tip package. The extra tips should be good for all package sizes from 0603 to medium size thermal pads. Everything works as it should. My only complaint is the incomplete user guide. The guide doesn't explain how to change the station to the preset mode which toggles the operating temperature between 2 to 5 preset temps. This mode is a must and changing to the mode is unintuive. Changing the temp on the digital version of the 888 takes a few too many button presses is the normal mode. Once I got the online manual it took a few minutes to set my temp presets and now is running as I need it. The setup is a one-time thing and automaticly saves all last settings and presets on startup. Best value I found. Small, cheap and quality.
Verified Purchase
Edward McLean on
Sep 25, 2015
Recommend to a Friend
nice scope; second one
5.0
I just bought my second DS1054Z for the shop.
I must like it.
I don't know what people mean with "entry level".
It is just a good piece of gear.
I hope it lasts longer than the previous ones.
The only problem is that the UI is a bit clumsy.
But I get used to it.
I can recommend this one.
Verified Purchase
PHIL MARCHAND on
Sep 16, 2015
Recommend to a Friend
Rigol DS1054
5.0
Amazing amount of functionality for the price. No regrets. The I2C decode and trigger functions work great.
Verified Purchase
Garry Barton on
Sep 14, 2015
Recommend to a Friend
Best Entry Level Digital Oscilloscope
5.0
This scope comes very well-packaged in a cardboard box with roughly 6 inches of foam padding protecting all sides. After unboxing, the scope immediately powers up, and is ready to use. At first, the scope contains a trial firmware, good for 200 minutes of use, or something like that. I immediately entered the license key to unlock all features of the scope, including the 200Mhz sample rate! You can get this key either by contacting rigol, or you can find a third-party site that will provide you with a key based on your model and serial number. The interface take only minutes to become familiar with, after which it is very intuitive. Everything is where you expect it to be, and does what you'd expect it to do. The build quality of the scope is superb, and all buttons and knobs look and feel fine. Upon bootin the unit, you can see 2 lights behind the front panel where it looks like buttons should be. These spaces contain buttons on other models, however (most likely for cost of production) they did not remove the backlights for these buttons on this model. The lights stay off after the scope boots, so this isn't really an issue in any way. The performance of the firmware is amazing for a scope in this price range. The signal refresh rate is essentially instantaneous with the memory depth and timescale properly set. There are oodles of useful measurements which can be chosen from a persistent menu on the left side of the display that has its own set of buttons. The scope has xy-mode, however it is limited to dot-display in this mode, and I have not found a way to enlarge the xy display, as by default xy is shown on the bottom of the screen, and a time-domain view above that. The scope probes feel somewhat cheap, however the build quality looks fine, and they function perfectly; it is only the material that makes them feel cheap. The scope has probe calibration terminals, and the probes come with a tool to easily adjust the probe's compensation. I have already used it the scope to observe the output of a pwm motor speed controller, and view audio signals with the xy mode successfully. If you'd like more info, Dave Jones reviews this scope on his EEVBlog: https://www.youtube.com/watch?v=W2qdtQkBKhc
Thanks TEquipment for an awesome scope!
Dylan Dailey on
Sep 14, 2015
Recommend to a Friend
The Best Scope for the money
5.0
This is the best selling scope and I know for sure why. It's really good scope for the price. I totally recommend it!
Verified Purchase
Manuel Malagon on
Sep 08, 2015
Recommend to a Friend
DS1054Z
5.0
I bought a B&K 20MHz analog scope 20 years ago and it did its job ok. Just ordered and received the DS1054Z from Tequipment; wow what a scope! It has everything the electronic hobbiest and Ham Radio operator would ever need. Just trouble-shot an IF circuit and found my problem with a DSTAR receive problem. I am in scope heaven.
Verified Purchase
Dave on
Sep 05, 2015
Recommend to a Friend
Great features/price
5.0
I'm a longtime electronics hobbyist, but never owned a real oscilloscope, and only occasionally used one in classes or work. This is my first, and it's a learning experience. From what I can tell, this scope has a great set of features and is fairly easy/intuitive to use. I like that it's easy enough to learn for a beginner, but powerful enough that it will still be useful when I'm not a novice.
Jim on
Sep 04, 2015
Recommend to a Friend
Rigol DS1054Z
5.0
This was an upgrade from an old B&K scope. Very happy with purchase and price. Scope does everything I need. I do CB radio repairer , Would recommend, Easy to use.
Ke5etn on
Sep 03, 2015
Recommend to a Friend
DS1054Z review
5.0
I haven't used all of the features of the scope yet, primarily because there are so many! The scope is easy to use, built in help is great and the screen is sharp and clear. I use it for debugging code with microchip PIC controllers. The I2C and SPI decoders have already saved me tons of debugging time. It's solidly built and I can say honestly, you won't be disappointed with this scope!
Verified Purchase
Phillip Brooks on
Sep 02, 2015
Recommend to a Friend
The DP832 is a great instrument for the price
5.0
This unit has become my main power supply because of the ease of which I can set the outputs.
I upgraded to the 1 mv/ma option. When I set a voltage it is always within the 1 mv range I want. Normally it is spot on. My Agilent voltmeter confirms the values on the display are accurate.
I am very pleased with the unit.
Verified Purchase
David Bishop on
Sep 01, 2015
Recommend to a Friend
Bedore you buy...
4.0
...consider the Instek GDS-1054B which looks like it might be a better 50 MHz scope with a few more features and better user interface for a few $ less.
The Rigol only has one vertical control multiplexed among the 4 channels which can be slightly clunky & annoying. Also, the 1054Z FFT uses only something like 20K points whereas the Instek uses 1M pts. That's the difference between a white noise spectrum looking like a bunch of peaks on the Rigol vs. a relatively straight line.
However, if you need/want a 100MHz scope and are comfortable hacking the 1054Z to get the extra bandwidth, this is the one!
Verified Purchase
JD on
Sep 01, 2015
Recommend to a Friend
I can't believe this is < $400!
5.0
Once in a while, I buy something because it's a bargain (which this is) and end up loving it because it's just great period. This is one of those times.
Rigol, if you're reading this, a few suggestions to make a great product perfect:
- need an easy button press to automatically move the vert position of a signal so that its CENTER (average) is in the middle of the screen. In modern designs we often work with single supplies, so our signals often have a Vcc/2 bias. Alternately, make a fast/coarse adjustment option. The way it is now, signals with a proportionately large DC offset force you to twirl the vert position knob for literally OVER A MINUTE to get your signal on screen.
- group some menus more logically, e.g. in the FFT menu the Offset & Scale must typically be changed together you shouldn't have to scroll the menu to go between those options.
- make the last-pressed illuminated channel-select button glow brighter. That way you wouldn't accidentally press the button twice in a row and unintentionally turn off the channel instead. This tends to happen because the channel-select buttons do double duty as a menu-select key.
MilesK on
Sep 01, 2015
Recommend to a Friend
Great soldering station
5.0
I know there are more expensive solder stations out there, but this one does everything I need, and does it very well. Highly recommended!
Verified Purchase
BK on
Aug 31, 2015
Recommend to a Friend
DS1054Z not so "basic" scope
5.0
Loaded with too many goodies to detail here. But that's the point. Really good all purpose scope in a small, modestly priced package.
Verified Purchase
Rudolf Hanau on
Aug 29, 2015
Recommend to a Friend
The scope for my bench!
5.0
The scope DS1054z from Rigol is a great piece of technology.
It has the higher price vs performance ratio in the family line. The controls and menus are easy to learn and handle, supported by an ever present help access.
FFT works fast even at really low frequencies allowing a real time analysis without too much lag.
The homework paid dividends after buying the DS1054Z.
Verified Purchase
Jose Martinez on
Aug 26, 2015
Recommend to a Friend
HAKKO FX88D
5.0
Very well built station. Would tell others to buy this SOLDERING station.
danny on
Aug 23, 2015
Recommend to a Friend
4 Channel Scope for the win.
5.0
Great Product, Does exactly what it says.
KurTrox on
Aug 21, 2015
Recommend to a Friend
Fantastic deal on a feature rich scope
5.0
Before deciding to purchase a Rigol DS 1054Z, I did my homework and read a lot of reviews of this unit. I've only had a couple of days of hands on time with the unit so far, but the scope is living up to the praise its been receiving! For the price, this simply can't be beat and I wouldn't hesitate to recommend it other out there.
Verified Purchase
Francis Brennan on
Aug 19, 2015
Recommend to a Friend
good quality supply
5.0
So far I've just done some basic work with this power supply and have not used its more advanced features. But I can comment on the overall fit and finish and build quality, which I think are excellent. The controls are intuitive. I'm very impressed so far with Rigol. I've also purchased a scope and bench multimeter from them which have worked out well.
Verified Purchase
Stephen Muckle on
Aug 19, 2015
Recommend to a Friend
Strong Scope for an Amazing Value
5.0
I recently received this oscilloscope as I needed a fairly strong and easy to use scope for when I am in a crunch.
After using it a for a couple of days I can honestly say that it would be dumb of me to not consider using this scope as my main tool when I need to get the job done.
One of the only downsides is it is 50MHz, but for what I am doing it is more than enough. You may want to be sure that your applications only need 50MHz.
All-in-all this scope is an amazing buy and I would absolutely recommend to any hobbyist who needs an entry scope or any long-time engineer who wants a scope that is easy to carry around and easy to use quickly.
~Shane~
Verified Purchase
Shane Kent on
Aug 19, 2015
Recommend to a Friend
great scope
5.0
more bang per buck than anything else currently in existence. great user experience with help menus that actually you know... help. perfect for someone who is picking up a DSO for the first time.
rcircuit96 on
Aug 17, 2015
Recommend to a Friend
Great Product, Great Price, Great Vendor
5.0
Quick and responsive sales team that is willing to provide answers and support. The product is reliable and a very good quality for the price. Haven't used it for very long yet, but am happy with the early testing.
Verified Purchase
Kevin S. on
Aug 10, 2015
Recommend to a Friend
Excellent Scope!!!
5.0
I purchased this scope for my various E-hobbies and have been completely satisfied with the features and build quality. For the price point, there just isn't a scope that offers 4ch and this much functionality. I have found the menu structure easy to navigate, probes are of decent quality, and buttons feel nice to the touch. The display is excellent, offers great contrast and quick response in regards to waveforms. I'm completely sold on this unit. A big thanks to TEquipment for such an easy ordering process, answering my questions, and fast shipping! Ya'll rock!
Verified Purchase
Christopher Ruhs on
Aug 06, 2015
Recommend to a Friend
Awesome PSU
5.0
No problems at all with this power supply. It's a nice mid-range unit that does everything I need in the lab. The circular arrangement of the number buttons is a little annoying, but I got over it. After reading the hackaday article about controlling these over a network, I'm even more excited about being able to automate tests. Big thumbs up.
geo_leeman on
Jul 30, 2015
Recommend to a Friend
DS1054Z is a great value
5.0
As a professional electronics engineer and hobbyist, I decided I needed an oscilloscope at home, but within household budget eliminating professional Keysight and Tek scopes.
So I decided to take a chance on the Rigol. It's really the best value in a scope that I've seen and for anyone with on old analog scope, this is light years ahead. Don't bother buying a used scope on Ebay, etc. Check out the Youtube videos and comments on EEV Blog on this scope. If you do any kind of serial interfacing, the deep memory, the serial decode option, and the waveform recording (segmented memory) will help you see the serial communications.
Doug on
Jul 27, 2015
Recommend to a Friend
Very nice equipment
5.0
I saw this oscilloscope on the EEVBlog, and it was recommended as a market changer, it seems like it was all true. The build quality is really good the plastics are firm nothing is flimsy, the scope is easy to use and most of the functions can be seen on the scope because it has good illuminated buttons for most functions, the screen is very big and also has a really nice resolution. The downsides which I have found are that the rotary encoders are a little bit unresponsive some times and to move the waveforms on the screen it takes it's time, but other than these waiting issues I've been taking measurements really comfortably and usefully.
Ricardo on
Jul 27, 2015
Recommend to a Friend
Hobbyist Review
5.0
I'm a hobbyist slowly learning more about electronics, and buying a non wall-wart power supply was a big step, but I've been very happy with this unit.
It's been easy to work with, it's made it much easier to change things around on my workbench, and it's made it possible for me to really understand power draw for the first time.
I'm very pleased!
Anonymous on
Jul 20, 2015
Recommend to a Friend
So far so good!
4.0
I am extremely impressed with this very affordable unit. I only managed to play around with it for one evening, but all the features seem to be working.
The scope is pretty responsive, the only negative point I can think of now is that the FFT doesnt work if channel 1 is not connected (even if you do an FFT on channel 2, 3 or 4).
Verified Purchase
SdC on
Jul 18, 2015
Recommend to a Friend
Oscilloscope (DS1104Z)
4.0
I purchased this product for my granddaughter college classes. She is attending WPI and majoring in robotics. She has already gave it a name and we believe it will add to her education.
Gene on
Jul 17, 2015
Recommend to a Friend
Unbeatable value
5.0
This scope is feature packed, and feels like a high quality piece (haven't had it long enough to judge the actual quality). I was originally going to buy a used Tek DSO off eBay, but you can get one of these for less, and with a ton more power and memory.
The only things I can really complain about is the menu select knob and the lack of a dedicated back key. The select knob doesn't have detents, which makes it very easy to shoot past what it is you are trying to select, and also makes it too easy to advance or back up one item when you press down on the knob to make a selection. The lack of a physical back button often makes you hunt two pages of menus away to get to the soft back key.
Overall, though, I can live with those two minor items at this price point.
Verified Purchase
Steve on
Jul 16, 2015
Recommend to a Friend
Great Oscilloscope
5.0
This is a great oscilloscope for the price. It has some advanced triggering features, data decoding (I2C,SPI,RS232) option, data interface for remote logging and a clear easy-to-use interface to set it up.
I have (2) of these - one at my home lab and one at my day job!
Verified Purchase
Craig Bishop on
Jul 16, 2015
Recommend to a Friend
Works for me
5.0
Bought it in Nov 2014 and every time I use it I am glad that I have it. My Tektronix, Eico, and B&K scopes now sit on the shelf collecting dust. And my digital meters and freq counters are getting lonely because this scope does it all. Pros: Lots of functionality. Feels solid. All knobs are clickable. Comes with 4 probes. Multi-color traces on the screen (match the probe rings). Cons: None come to mind.
Verified Purchase
Allan Sieker on
Jul 15, 2015
Recommend to a Friend
Great beginner scope
5.0
This is the first scope I've purchased. After a lot of research and forum reading I decided to start with this device. It has been well received by the online community and has numerous demos and videos on how to operate it. It is packed with a lot of features for a very modest price. TEquipment had fast and accurate shipping, the item was packaged well.
Verified Purchase
Matt LaPaglia on
Jul 14, 2015
Recommend to a Friend
hakko 888d
5.0
great soldering station, heats up within 30 seconds
Verified Purchase
Robert De Guarde on
Jul 10, 2015
Recommend to a Friend
Excellent value keeps getting better
5.0
I have been in the hobby for over 30 years. Buying an affordable oscilloscope never quite made the cut (there are other "workaround" ways to visualize or trace a signal) due to the limited tool-set an entry level oscilloscope has.
This is different. Working on an Arduino and want to figure out what page the demuxer really sees? No problem. Want to capture a signal and analyze it for spectrum (within the limited window)? Want to see the input analog signal as well as the A/D serial out? No problem.
And since I purchased it a month ago, already a firmware update added new FFT configuration options as well as a new math filter capability.
Well built, extraordinary value for money that will change the scope business forever.
Assaf on
Jul 09, 2015
Recommend to a Friend
Rigol DS1054Z
5.0
I found the operation of scope and its features to be self explanatory & very easy to use. It has a Deep memory. A nice color screen that stores a substantial amount of information. It has a convenient USB interface on the front and and additional one on the back.
The probes that supplied are adequate and work pretty well but do not have the same quality feel as the rest of the unit. The probes are not proprietary so if you can use your own standard oscilloscope probes and they should be compatible. The menu selection for probes is per channel and accommodates a very wide range of probe values.
In my opinion this is a really nice scope and a great value for the price. The look and feel of the unit is comparable to more expensive scopes and if you're only going to use it for less than 50Mhz this would be a very safe choice.
Verified Purchase
Ray on
Jul 07, 2015
Recommend to a Friend
top notch site and sales help
5.0
The tequipment.net site is perfect for helping one to choose among all the test gear they offer. The "compare" feature is very helpful in narrowing down equipment choices.
The salesmen/ladies were very helpful suggesting a digital 'scope that met my requirements.
Lee
Verified Purchase
Lee Clinton on
Jul 06, 2015
Recommend to a Friend
Great Price!
5.0
Great price for this 4 channel oscilloscope! Can't beat the price and free shipping!
Verified Purchase
Mark Canlas on
Jul 05, 2015
Recommend to a Friend
Great value
5.0
Great value for the money. The button/knob layout and waveform colors could be improved but the great performance for the $$$ make these details easy to deal with.
Verified Purchase
Steve on
Jul 04, 2015
Recommend to a Friend
Hakko FX888D-23BY
5.0
For general purpose and home electronics. The build quality of this device was surprisingly good and the small footprint is great for those with limited space. A variety of tips are available to suit just about any need. The UI is a bit taxing, but once I get more practice with it I should get used to it. For the price you would be hard pressed to beat this.
Verified Purchase
Stefan Ignasiak on
Jul 02, 2015
Recommend to a Friend
Really Love The Scope
5.0
I wanted an inexpensive to moderately priced scope for hobby bench work. Did a ton of research and noticed this DS1054Z. I absolutely love this product. Really feature rich, lightweight and small desktop footprint so great for my crowded workbench. The deep memory is a treat at this price point. The probes are fine. One worry I did have was potential fan noise since that seemed to be a common concern in many forums. My room is normally perfectly quiet so I knew this could be an issue. Well, now I have it and can say I can hear the fan but I do not find it offensive at all. It's really a soft low volume background thing that I don't even think about. The screen shares real estate with menus and read outs but it's still nice. The turn on time is 23 seconds, so I turn it on when I sit down and arrange other stuff. Input impedance is not switchable. I wish it was. So I guess I'll buy an adaptor. For the price it has soooo many functions and four channels which is fabulous. The warranty is 3 years, but, at this price that's fine too. All in all I'm very happy with my choice. BTW, shipping was reasonably fast and free and easy to track so thumbs up to Tequipment- I will use them again. Also, i have no affiliation with any of these companies but I do like to recognize good products or services.
Verified Purchase
GeoMan on
Jun 30, 2015
Recommend to a Friend
What a bargain
5.0
This scope is almost to good to be true, especially for $400. I had bought a TENMA 2 channel scope 2 years ago, but the Rigol so outshines the TENMA in every respect.
The capabilities are amazing. Ireally wanted a battery powered scope for field work. so with somw $30 14.4V drill batteries running my incerter, I have a totally isolated scope great for transient work. I got by for decades with a 1MHz bandwidth that 50 seems like overkill for power system measurements.
The instruction book is great. Very detailed, and well written for a Chinese product. Isolated inputs would be nice, but I can live with 3 current loaded CT inputs, and one ground referenced voltage input.
I'm still discovering what this little scope can do.
I will be testing it soon ina high power capacitive discharge test to see how it survives that noisy environment. I have 2 power options: a 1599V isolation transformer, or my battery, inverter method It draws 2A from the battery about 25W A 3AH 14.4V nicad will run it for about 1 hr. This scope is so much better than my 35 year old 50# Nicolet (I'm a low budget operation) Grace & Peace!
Verified Purchase
Roy Alexander on
Jun 29, 2015
Recommend to a Friend
Excellent station for the money
5.0
After doing much research on soldering stations, I settled on this unit. I am very pleased with the purchase. The price-to-performance ratio makes this product difficult to beat. It is very well designed and heats up extremely fast. Highly recommend!!
Verified Purchase
vinyl_79 on
Jun 28, 2015
Recommend to a Friend
My 1054
5.0
I've been using o'scopes since 1960 servicing IBM computers. I DO wish I had the capabilities then that my DZ1054 now has. The only thing missing is the scope doesn't talk to you!! I do wish the DZ1054 had a probe that sensed that it was times one or times ten. I suggest to all that you should leave your probes in the times ten switch position and be sure to select or verify that setting on the vertical menu. I also recommend printing out the user guide from the furnished CD. An office supply store will do a print both sides for about $12.
Bob Walters
Verified Purchase
Robert Walters on
Jun 27, 2015
Recommend to a Friend
Great PSU!!!
5.0
This is an awesome DC power supply!
The only "complaint" I have is the unorthodox arrangement of the numeric keypad around the jog wheel!
Verified Purchase
Allen Gordon on
Jun 27, 2015
Recommend to a Friend
Great bargain, except for the options
5.0
I've had this for one week and am most impressed with its capabilites, as noted in many other posts. My only negatives (which in no way make me regret the purchase):
* Options are impressive but after 30 hrs turn into a pumpkin. Prices to buy are unreasonably high.
* The manual is clear but not complete. I couldn't figure out how to remove the math displays until I re-watched an old eevblog post.
The scope is a real upgrade from my old TEK analog!
Verified Purchase
Craig Johnston on
Jun 27, 2015
Recommend to a Friend
DS1054Z
5.0
Very nice scope for a low price. I have no complaints.
Verified Purchase
Tom Baker on
Jun 24, 2015
Recommend to a Friend
Hakko FX888D
5.0
High quality soldering iron for a home lab. It's a little pricey for the average weekend hobbyist, but if you take your soldering seriously or solder often, the price is nothing compared to the quality you're getting.
The UI was intimidating at first, but after a few minutes, I got used to it.
Verified Purchase
Tom Baker on
Jun 24, 2015
Recommend to a Friend
High end features...low end price.
5.0
This is a great scope. I spent months researching the perfect starter for my home workbench. I repair music gear for a living and this does everything I need it to and beyond. Highly recommended. If you are in the market for a scope just buy this one. I won't be upgrading anytime soon, and when I do it will be for a higher end unit. Cheers.
Verified Purchase
Jason Smith on
Jun 21, 2015
Recommend to a Friend
Nice update to Ham Radio Bench,welcome to 2015!
5.0
I have a bench loaded with Tek/HP equipment of vintage ages -- all still solid, calibration has been pretty stable and they remain as good functional equipment. All great for working on classic boatanchor radios, but somewhat lacking for troubleshooting the newer model transceivers.
This Rigol scope has been a terrific update, and does more than one needs for these troubleshooting and building projects. And it does so at a great low price, complete with 4 probes for under $400.
The digital functionality has much to recommend it, and the integrated on-screen measurements capabilities (customizable) as well as the math functions add to the ease of use. It's a real delight to see the full array of measurements from a device under test on screen. It would be nice to have a full printed manual instead of what is essentially a quick start guide, but it does come with the inevitable disk substitute for that.
As a secondary benefit, since it comes as a freshly calibrated device, traceable to NIST it has allowed me to check the calibration of most of my older pieces of HP/Tek equipment to a reasonable level of accuracy. That alone probably paid for the scope...
Anonymous on
Jun 19, 2015
Recommend to a Friend
Best Service
5.0
Hakko makes wonderful products and they are the best products out there for the money...I would suggest buying all your electronics and tools and needs from Tequipment.net you won't find a better place..
Verified Purchase
Torque on
Jun 17, 2015
Recommend to a Friend
Well designed, easy to use
5.0
for many years I have been looking at getting a bench power supply for my electronics projects. I had been building small power supply's to get by, but feel that this purchase was a necessary upgrade. I have only used this power supply a few times since it arrived, but the experiances are great. I really like the over current/voltage protections for when I am building test circuits. This unit will come in very handy. I highly recommend this unit to anyone looking to buy. This unit has many great features, but is not too complicated for new players to electronics. I also have had great experiences with the Rigol DS1102E oscilloscope for many years, so I don't see why this power supply can't be any different.
Verified Purchase
Ethan Taylor on
Jun 17, 2015
Recommend to a Friend
Great Scope
4.0
This Scope was recommended to me by my son ( the creator of the Tricorder Project). He uses it in his research and i trust his opinion. As a retired automation controls system developer for forty years i have used a lot of test equipment. The DS1054 4 channel scope is just great. My Techtronix's scopes are gone, they were to big for the bench and were starting fade away into the sunset. You have to love this scope, small foot print and a fair price.
Verified Purchase
Roy Jansen on
Jun 17, 2015
Recommend to a Friend
Rigol Oscilloscope
5.0
I've been been thinking about getting a new oscilloscope for a few years now. I'm glad I waited. What a great scope and what a great deal. I'm very pleased with this Rigol DS1054Z. I'm also very happy with the service from TEquipment. Thanks
Verified Purchase
Tim on
Jun 17, 2015
Recommend to a Friend
A great price for a good power supply
5.0
This power supply is a great buy. What makes it really nice is it's upgradable via software. You can purchase the model that has everything unlocked for about double the price of this one, or you can pay to unlock only the features that you need on this model. For example, if you want to be able to hook this up to the network and control it via the local area network, just pay to get the unlock code to enable Ethernet. Another great thing about this power supply is the wealth of support from people on the forums like EEVBlog. This is great in case something goes wrong with this unit when it's no longer covered under warranty. You can simply log into the forums and ask advice on how to fix it. I think that's wonderful. There was one issue with my unit that was a little displeasing. It turns out some of these units shipped with the wrong banana plugs. On my unit, two of the input jacks are just to dang small. The company was more than willing to send me adapters and although I do appreciate the adapters, I would of rather of had replacement jacks sent so I could replace the bad ones myself. Rigol knows of this problem and they have fixed it but there's still a chance you might get one of the defective units. I am positive if I wanted to return my unit to get another one without the same problem, Rigol would of sent me another unit.
Verified Purchase
Kenneth Swarthout on
Jun 16, 2015
Recommend to a Friend
Excellent Power Supply
5.0
Well built, easy to use, very versatile bench supply. Have shopped around and used many power supplies and for the money this one is the best, has features that match or exceed more expensive units, and can be upgraded for a fair price should you need the extra capabilities this unit offers. Some dislike the numerical keypad layout but I find it intuitive and easy to use. The only con I can even think of with this unit is some of the banana connectors I have don't seem to fit or fit very easily. This could be the cheap ebay cables I purchased however.
Heath on
Jun 16, 2015
Recommend to a Friend
Best Quality iron for this price range
5.0
The Hakko FX888D is a great digital soldering iron. The display is great, the digital display is much better than the old analog version. The temperature control is accurate and fast. There is very little down time when changing temperatures either up or down and when starting up the iron.
The preset temperature function is somewhat confusing to operate. Also, the iron could use a LED ON/OFF indicator. This can be a safety concern because it is very easy to leave the iron on overnight if the display is concealed.
Overall, this is the best quality iron for this price range. It is definitely versatile with multiple different tips available for multiple applications. The build quality is strong and durable, yet lightweight. Iron is comfortable for long hours of soldering at a time, should not hurt your fingers.
Malcolm on
Jun 16, 2015
Recommend to a Friend
not bad
3.0
not bad considering the price, this oscilloscope has a lot useful features with easy push buttons. The fan is a little loud, and the clicking noise when power on or sometimes switching between modes is a little anoying. nicely built, light wieght, and the probes feels really good. I haven't use it much so I cant really say more about it. But over all, Its a good entry level scope.
xxngo on
Jun 14, 2015
Recommend to a Friend
Great Scope
5.0
Arrived well packed - complete package with 4 probes - very clear display - first simple checkout all looks good - I have a Siglent 1072CML that I am replacing - this is much better especially the higher bit encoding on front end and gradient display - looks more like regular analog scope - for the $ with TE discount & free shipping a no-brainier to update to it. Does have fan noise albeit low.
Verified Purchase
David Edson on
Jun 11, 2015
Recommend to a Friend
Excellent Scope for a the Hobbiest
4.0
For a tinkering at home and light weight development projects, this is a great scope. There are not many scopes in this price range that offer the features that this scope does. I've been able to trigger on signals and have the scope show frequencies and voltage peaks with ease. As shipped, all the bells and whistles are unlocked in trial mode and the serial decode under the waveform is quite useful. The notable draw backs are that the scope probes feel pretty cheap but functional and the crispness of the drawn waveform is nowhere nice as the high end scopes that I use at work. Its a great device for its price, but certainly won't dislodge higher end oscilloscopes for corporate use.
Verified Purchase
Anonymous on
Jun 09, 2015
Recommend to a Friend
Rigol DP832
4.0
I am quite pleased with the power supply and as I am just a hobbyist it was a big purchase for me. None the less as value per dollar I consider it rather inexpensive.
First the bad parts, the jacks are a little tight and all my leads don't fit in as well as they should. Once the warranty is off I will probably drill or sand them out. I find this quite annoying and feel it drags down the unit considerably when judging quality of build. The other thing I find quite annoying for me is the length of the unit. It is considerably longer than any other piece of equipment I have so it does not sit well on my bench. That being said I knew the length before I bought it and still went ahead. Two minor issues are the fan noise and it has a color screen, why not let a user use it as such.
Now the nice parts. I thought I would hate the keypad layout, turns out I love it. The unit is responsive and switches nicely as the power is brought up and down. It switches from output to output nicely and the display shows this clearly. Although I faulted the lack of nice color display patters the display is beautiful, it is crisp and easy to read even from across my bench.
To summarize, if I were to be able to choose this unit over again, I would. Hopefully my jumper leads will fit properly in a newer production model.
Cam Mayor on
Jun 06, 2015
Recommend to a Friend
Great Scope Value
5.0
I've just touched the surface of this scope's capability. Display is vivid and accurate and feature selection is easy. Delivery was quick and painless. The leads should be slightly better quality but they will be good for a few months until I can find better ones.
Budman on
Jun 05, 2015
Recommend to a Friend
Tremendous Value
4.0
This bench power supply is incredible value at a $450 price point. It has all the features I was looking for plus options for upgrades. I also purchased the Hi-Res option for 1mv/ma resolution.
I agree with most people that the display is much better than on the DP832A. I don’t know what Rigol was thinking. It would have been nice to have a slightly larger display for my aging eyes, but it is definitely adequate.
I would have given it 5 stars if it were not for the issue of the output terminals. The banana plugs are inconsistent in sizes. I had to ream the holes out so they were all the same. Not that big a deal. For some it might be.
All in all, very happy with this unit.
Verified Purchase
Nicholas Ivano on
Jun 04, 2015
Recommend to a Friend
Excellent Price/Performance
5.0
Very comprehensive feature set and 4 channels. Easy to use, haven't had to open the manual yet. A lot of measurement options and screen can get crowded becoming an eye test. Unit is compact especially for 4 channel and even though the buttons are close together, I haven't had a problem operating. Overall, very happy with the Rigol.
Verified Purchase
Karl Edwards on
Jun 04, 2015
Recommend to a Friend
Decent Iron for the money
3.0
For the price I dont think you can go wrong, in terms of getting a iron thats reliable and that you will be able to buy parts for in the future.
That being said I think I still prefer my chinese Aoyue branded iron, as it has a much higher thermal capacity, I have done a lot of soldering with this Hakko over the past month, and any large joint or high thermal mass part requires really cranking the irons temperature, or it takes a long time to wet the joint.
Contrasting with my cheap and old Aoyue, which I have checked it does hold temperature reasonably accurately, not as well as the Hakko, but it is able to wet very large joints with ease.
The cable for the iron is very nice on this unit, and the small footprint is great for a small bench. I think this unit will grow on me once I get more practice with it and get used to it, and for the price you would be hard pressed to beat the build quality.
Justin on
Jun 02, 2015
Recommend to a Friend
DS1054Z
5.0
I purchased the DS1054Z to replace a 12 year old Tektronix TDS1012 DSO used primarily for audio amplifier development and testing. I was looking for more capability and the Rigol seemed to offer it. Tequipment were fast with their delivery, and the scope has more than lived up to my expectation. Very happy. I would recommend this item.
Gary on
May 31, 2015
Recommend to a Friend
BEST UPGRADE I'VE EVER DONE!!
5.0
I haven't had a new scope in over 15 years. For the cost, you can NOT go wrong! It saves me time by having multiple measurements "on-screen" so I don't have to use multiple instruments at the same time.
Having 4-channels at the ready makes my troubleshooting life so much easier! Also, being able to save "screen-shots" for archiving on a thumb-drive (I use them for future comparing) is a wonderful addition.
If you think you have more questions... Check out the "EEVblog #703". There are a few videos just about this terrific scope at the blog.
Don't wait! Buy it NOW! You won't regret it!
Anonymous on
May 30, 2015
Recommend to a Friend
Just great
5.0
Wow! What great piece of HAM radio equipment. Sturdy, easy to use and very accurate.
Verified Purchase
William Lampe on
May 30, 2015
Recommend to a Friend
DS1054Z an amazing value
5.0
I was a bit skeptical about the quality of this scope but after reading all the great reviews here and across the web I decided to roll the dice and go for it.
I'm one happy hobbyist.This thing is amazing for the price. You'll know as soon as you take it out of the box. It feels very solid. Not a cheap toy by any means. I had a coupon code for it and with the free shipping it was at my front door in 3 days for only $375.00. I have an Agilent 33220A function generator that I tested the scope on. With the Auto feature I was reading traces in seconds. Looks like the TEK will be collecting dust for many years to come. I highly recommend this scope for any beginner scope. it's awsome...
Verified Purchase
Ronald Dumas on
May 30, 2015
Recommend to a Friend
J.Rasmussen
5.0
Great Scope with lots of easy to use features, bought one for training co-worker. After the unit was tested, I purchased 3 more. Great buy at twice the price...
J.Rasmussen on
May 29, 2015
Recommend to a Friend
Great product!
5.0
I purchased this scope after quite a bit of research. It's a great product and more than capable of what I wanted to do. I'm using it for automotive signals and it's been flawless thus far. Recommeneded!
Verified Purchase
Andrew Darud on
May 28, 2015
Recommend to a Friend
Great value
5.0
I was surprised at the quality of this scope for such a low price. It's very easy to use, and 4 channels! I don't think there is anything else out there that can rival it at this price point. Definitely a good buy.
Verified Purchase
Anonymous on
May 28, 2015
Recommend to a Friend
hakko888d solder station
5.0
Got this hakko888d solder station and could not believe how well it solders,really works well.and Tequipment that I ordered from was really good to do business from,fast service and customer service was so nice.will be ordering again in the future.
Verified Purchase
Dennis Hall on
May 28, 2015
Recommend to a Friend
Stop reading reviews and purchase this already!
5.0
If your sitting at your desk and drooling over this scope and have looked at all the pictures and have been on youtube to see all the reviews then there is really no point to mention here all of the DZ1054 features.. because you already know them by heart. Just buy the thing already its the best scope for the price bracket.. and has more features you will ever need for an oscope.NOT TO MENTION 4 CHANNELS !!!
GaryD on
May 27, 2015
Recommend to a Friend
Great Scope!
5.0
This scope really impressed me. I sold my Tek TDS-210 and upgraded to the DS1054Z. I had read the reviews and I must agree with the majority of them, this is a great scope. The LCD screen is beautiful! It is 800x480, high resolution for a scope in this price category. It’s bright, crisp, has a wide viewing angle and is very legible even though some of the characters are pretty small. The buttons have a nice feel to them, many have LED back lights and the audible feedback works well. The shaft encoders for the voltage range selection have rotary detents but the other encoders do not. This makes sense on the channel vertical control, but the multi function encoder could use detents for easier selection of the menu items. The software drives them smoothly and accurately. All the shaft encoders have a detent setting when pressed, which is a time saver if you are near the extremes.
The amount of data the display shows is astonishing. Most simple measurements are made automatically, a great advantage for “on the fly” measurements. A manual cursor mode is available if needed. I really like the data decoder software. It’s perfect for decoding busses on microcontrollers. I mainly use this instead of my logic analyzer. The FFT math function is a welcome tool, as is the Multi level Intensity Grading feature. The measurements even includes statistics. The hardware frequency counter is a nice bonus. The Pass/Fail feature is very interesting, I can see myself using this for missing pulse detection or similar application.
The operation of this scope is straightforward in most cases. I figured out the majority of the features and operation without looking at the manual (in true engineering fashion!). There are a few idiosyncrasies, but nothing that would really interfere with most tasks. Most of these were cleared up once I read the manual.
The four scope probes are pretty nice. They are rated at 150Mhz, so they don’t interfere with the scope’s bandwidth. They feel sturdy, although not quite as beefy as the Tek ruggedized probes. They do have one advantage from the Teks. When placing the hook tips on, they make a nice solid click sound when seated properly. The Tek’s hook tips slide on without any sound, and I have missed a few times, as they didn’t make a solid electrical connection.
The only minor operational drawback I have encountered is that the record function does not work while in the logic analyzer decode mode. The large memory does help here, as the start-stop mode does work in the Logic Analyzer decode mode, so I can freeze the display and then review the data in detail. The fan noise issue isn’t a deal breaker, but it is noticeable, especially since my last digital scope was silent.
This is a fantastic entry priced scope. It doesn’t do it justice to be considered an “Entry Level” scope due to its vast feature set and construction. The fit, feel and finish implies this is a nice piece of test equipment. Nothing about this scope says “low cost or cheap”, other than the price. I am very satisfied with my purchase.
Verified Purchase
Vtech on
May 27, 2015
Recommend to a Friend
GREAT SCOPE
5.0
THIS A GREAT EATERY LEVEL SCOPE. YOU CAN NOT FIND A SCOPE LIKE THIS FOR UNDER $1000.00.EVERY HAM SHACK SHOULD HAVE ONE.
Anonymous on
May 26, 2015
Recommend to a Friend
Great scope!
5.0
Decided on the Rigol DS1054Z after watching the reviews on EEVblog and wasn't disappointed. It's a great scope! Watch the videos if you're looking for a hobbyist scope. Shopped around and TEquipment had the best price and free shipping. Shipped via UPS ground; tracking numbers posted within 48 hours; arrived in less than a week. No problems. Others at work have had similar good experience with them.
Verified Purchase
David Coon on
May 26, 2015
Recommend to a Friend
Excellent product for price-point!
5.0
I have been "scoping" everything in my shop since this arrived. The DS1054Z is everything promised and way more scope than I actually need! With a 100X probe, I'm able to capture beautiful waveforms in my tube amps!!
Verified Purchase
Allen Gordon on
May 26, 2015
Recommend to a Friend
Rigol DS1054Z Amazing scope for less than $400
5.0
Great service and shipping. Purchased the new scope on Friday, and had it delivered on Tuesday.
The scope itself worked flawlessly as I tried it on a number of circuits. Very intuitive interface, and a great feature set. Comes with all 4 probes, so that was nice.
Verified Purchase
rvnash on
May 26, 2015
Recommend to a Friend
Intuitive Tool
5.0
This scope is very easy to use. It came highly recommended from EEVblog and other places too. The feature set is rich and the four channels is hard to beat at this price. The large screen makes it easy to view measurement info as well as the signal traces. I also love being able to immediately save data/screenshots to a USB flash drive. I definitely recommend this scope. It works great for my hobby projects!
Verified Purchase
Peter Dudash on
May 25, 2015
Recommend to a Friend
Rigol 1054Z - great equipment for the price
5.0
I am very pleased with my Rigol 1054Z. It seems to do everything a Tektronix would do, at a price a home hobbyist can afford. I bought one for home hobby use but would recommend them to an electronics test or repair facility for basic measurements. The user interface is a little different, but I think it's actually more intuitive. You have one vertical scale knob, and you select which channel you want to adjust with it.
Also the probes seem just fine, they have 1x-10x attenuation switches on them. They did come with a little yellow plastic cap that I have no idea what to do with - looks like they are made to slip over probe tip, but they don't stay so I don't know.
I like having 4 channels because I can watch logic signals in real-time, then freeze the screen and zoom in to decode.
I give it 5 stars!
John Mc on
May 24, 2015
Recommend to a Friend
Excellent price/performance
5.0
Very comprehensive feature set and 4 channels. Easy to use, haven't had to open the manual yet. A lot of measurement options and screen can get crowded becoming an eye test. Unit is compact especially for 4 channel and even though the buttons are close together, I haven't had a problem operating. Overall, very happy with the Rigol.
Karl Edwards on
May 22, 2015
Recommend to a Friend
Excellent value for money
5.0
This o'scope is one of the best buys currently available. the performance specs are met and the operation for most tasks is nearly intuitive. After using 'scopes for over 50 years, this unit has the best balance of functions, performance and value to take care of all usual and many unusual measurement needs I've ever had the pleasure of using.
Verified Purchase
Aarne Haas on
May 20, 2015
Recommend to a Friend
Great oscilloscope for the money
5.0
The oscilloscope arrived faster then I though it would. A similar Agilent scope that I used at work was about 3 times the cost, with similar functionality. So far the product works great for hobbyist electronics.
Verified Purchase
Daniel Ban on
May 19, 2015
Recommend to a Friend
Best there is for the money
5.0
Great scope, also upgradable. Can't be beaten for the price.
Verified Purchase
Mike Johnson on
May 19, 2015
Recommend to a Friend
Best value by far
5.0
This scope came highly recommended by eevblog and 4hv.org. It has not disappointed. Very rich feature set, especially if upgraded, good bandwidth, easy to use, and very well priced. I own multiple Tek and Fluke scopes and this scope comes impressively close to their performance and exceeds their features.
Verified Purchase
Aron on
May 19, 2015
Recommend to a Friend
HAKKO FX888D-23BY
5.0
The Hakko FX888D soldering station was shipped on time and is a joy to use. Heats up within a minute or two and soldering like a dream. If you have a problem with your soldering you can be assured it's not the gun. This thing is very well constructed and easy to use. Highly recommended!
Verified Purchase
Gregory Raft on
May 18, 2015
Recommend to a Friend
Great machine
5.0
More features plus four channels than competing DSO's. Software upgradable and best screen ever.
Steven on
May 18, 2015
Recommend to a Friend
Rigol DS1054
5.0
Great value for the money. Much more convenient to use than my 30 year old Tek 2215A. The DS1054 is an affordable scope for the amateur radio operator. SWR function was a big selling point - great for antenna work. Have suggest my radio club member should look into this scope!
Paul Avery on
May 17, 2015
Recommend to a Friend
High Quality Scope.
5.0
This is a very high quality scope, for the price of a quality multi-meter.
It is a rugged beautifully designed scope. That I was able to without directions start using. It is highly accurate, and very consistent.
I was able to connect with the scope over USB and Ethernet, using free software on the internet. It was not seamless but totally workable. I controlled the scope and I have received graphic images of the scope screen at my computer. You can also just use the USB memory port to store images of the scope screen to a USB memory key, as well. No interface or software necessary. You just have to push a button on the scope.
The scope truly surprised me, I had planed to use it for experiments that might damage the scope. After receiving the scope and seeing the quality, I am afraid to use it for that type of testing. I am going to risk one my old Tektronix scopes instead.
Sincerely,
William McCormick
William McCormick on
May 17, 2015
Recommend to a Friend
Great budget Scope
5.0
While I have had limited use with this product so far, it has been great at everything I required of it. The screen is beautiful and the quick access measurements are useful.
The ability to plug in any flash drive and take a screen shot with a single button is also a great plus.
Verified Purchase
Gregory Pohodich on
May 16, 2015
Recommend to a Friend
THE oscilliscope to buy!
5.0
The DS1054Z is the world's best selling oscilloscope.
It's a high quality, full featured, four channel digital storage oscilloscope. And has unbeatable specifications for the price: powerful trigger functions and broad analysis capabilities.
See also:
EEVblog #703 (12:47) http://www.youtube.com/watch?v=W2qdtQkBKhc
EEVblog #704 (1:18:43) http://www.youtube.com/watch?v=ETCOhzU1O5A
Tek's Oscilloscope primer http://info.tek.com/www-xyzs-of-oscilloscopes-primer.html
Verified Purchase
ericjwin on
May 16, 2015
Recommend to a Friend
Rigol 1054Z
4.0
Very nice, worth the money
c kaczor on
May 16, 2015
Recommend to a Friend
Great deal!!!!!
5.0
I decided to start searching for a digital scope a couple months ago. I've got a couple older teks but they're both quirky and unreliable. After extensive searching, reading tons of reviews about other scopes this one seemed to be the best value for the money. I really don't care for the quality of the supplied probes, but for the money it is what it is. The attachment that goes on the end of probe doesn't fit very snug and comes out quite easily if the probe is leaning downward, but since I have other probes I can make do. Scope wise it has way more than I can understand and use so I'm happy. A forewarning on the software, I decided to try to load it on my win7 computer, after restart windows wouldn't load. The software broke windows and I wasn't able to restore windows. It would be nice if there was a Linux variant for the software as I usually don't have problems with Linux stuff. If you're considering a purchase you won't find more value for your money look all you want but you're wasting your time, just go ahead and buy it NOW!!!!! :D
Verified Purchase
Jason Adams on
May 16, 2015
It takes a lot of guts to ask me for a review!
1.0
This transaction was possibly the most exasperating I can remember.
When product was ordered there were 22 in stock - which was good since we needed it immediately. We actually received it more than eight weeks later.
But wait - there's more. The ad stated that my credit card would not be charged until the product shipped. That was the ad - the reality was that my card was charged the day of the order.
To summarize - Great product - LOUSY customer service!
And they get one star because I keep thinking it could have been worse... but I am not sure how.
Tequipment Response: I review your order in our system. The customer used paypal. Paypal takes the money right away. We do not charge credit cards until we ship the order but paypal for us is not a credit card and works differently. We will make this more clear online. As for the product this item was on a 12 week back order from the end of dec until March. The port strike on the west coast delayed shipments 10 weeks. Our product just sat there on the dock due to the "slow down"at the ports. As for the item in stock, if the item was in stock it would ship right away. I cannot answer that statement other than that sounds very unusual. It may be possible we had 22 units in stock of the next model as we show our stock online. Thanks for the business and feedback. We will add some info online to avoid these issues in the future.
Burgess Macneal on
May 15, 2015
Recommend to a Friend
A really nice power supply.
5.0
This is my first power supply and I'm so certain now that I have picked the correct one! There are cheaper ones out there with so many less features. This thing is great. Although right now I don't use the two extra outputs, I'm sure sooner or later they'll come in handy. I love how you can set the amperage and the volts. If I want 3.0V and 1.5A, I got it, if I want 3.5v, 1.5A, I got it. It also appears to be well built. It has some weight to it, it's not flimsy. It's nice and solid. The only thing I'd like to see different is the monochrome display. You can change the colour but everything is that one colour. You can't have mixed colours like you do with the DP832A. Still, for the price, you can't go wrong!!! I love how some of the features are software unlockable. If you don't need them, you're not paying for them! If you do need them, you can purchase them for a few (around 100$ per feature).
Spork Schivago on
May 15, 2015
Recommend to a Friend
Still the gold standard
5.0
As always Hakko sets the bar for the everyday use soldering station. Heatup is very fast with the digital display counting up the degrees faster than the price on a gas pump. The cord is very flexible and does not pull the base unit around as you move the iron. The two options for tip cleaning built in saves me bench space from my separate brass wire cup.
Verified Purchase
TeslaPunk on
May 15, 2015
Recommend to a Friend
DS1054Z
4.0
This scope is the terrific value for a 4-channel 50MHz scope.
Verified Purchase
Alan Lowne on
May 15, 2015
Recommend to a Friend
Great Buy !!
5.0
Outstanding product excellent service quick shipping and quality packaging!!
Verified Purchase
Josh Adams on
May 13, 2015
Recommend to a Friend
Great scope, great price
5.0
Needed a new scope, saw the review on EEVBlog and knew I found the right one. The scope is as nice as I expected, a huge leap from my old 20mHz analog. TEquipment was great to deal with, I live close to a warehouse so I had it in a day. That night I was doing measurements, capture to pc via usb, and data analysis. Easy to use and very reasonably priced. Don't hesitate, just get it!
Verified Purchase
Michael Guntrum on
May 12, 2015
Recommend to a Friend
Buy 4 probes get scope free!
5.0
Amazing fact is that for the price of four probes from a well known scope manufacture you can also get this 4 channel 1GS scope. The UltraView seeks to make the display more "analog" scope like and is a nice addition to DSO. Very deep waveform memory allows one to view captured data.
A couple of things to note. (1) the sampling rate is divided by the number of active channels in use. 1ch=1GS, 4ch=250GS. (2) The input filter selection does not have the adjustable digital filter offered on the 2ch version.
REB352 on
May 12, 2015
Recommend to a Friend
Rigol DS1054Z Digital Oscilloscopes
5.0
Great product goes without saying. It was backordered for weeks but thanks to good communication and frequent updates from TEquipment all expectations were set accordingly. Happy with our purchase and the process.
Anonymous on
May 11, 2015
Recommend to a Friend
Gift
5.0
This oscilloscope was purchased by us for a Christmas present for our son who is a computer major @ UNR(University of Reno). He told us he is happy with the equipment and can use it for his academic projects.
EES
Edward Shure on
May 10, 2015
Recommend to a Friend
Great scope not so hot communications
4.0
Great scope when I finally got it. When I ordered it I was told it would be shipped shortly. A month later I call and emailed only to find out that the shipment was setting off the CA coast because of long shore mans strike. Took another month to actually get it. I think if they would have emailed me before I called and told me why it was being delayed I would have had no problem.
Bruce on
May 10, 2015
Recommend to a Friend
Rigol DS1054Z
5.0
Based upon various online reviews, I ordered the RIGOL DS1054Z. Although the original ship date was missed, it was due to no fault of TEquipment. Dock strikes on the west coast caused the delay. Packaging exceeded my expectations as well as the functioning of the unit. For the price, this is a great item. My oh my, how technology has advanced.
Bill B on
May 10, 2015
Recommend to a Friend
Good, cheap scope
5.0
Excellent scope for the price. Everything works as you'd expect, probes are of decent quality.
Verified Purchase
Mick on
May 10, 2015
Recommend to a Friend
It is an unbelievable tool
5.0
I always wanted to buy an oscilloscope buy price was a barrier. What are the options? Get used one from eBay and pray to get a good one? Nowadays you can get a great NEW unit for a reasonable money. This oscilloscope looks great, comes with a lot of useful goodies. You actually have everything you need right from the box and can start your tests right away.
Special thanks for tequipment for fast order handling and shipping.
Verified Purchase
Vladimir Levinson on
May 09, 2015
Recommend to a Friend
Rigols DS1074Z
5.0
Excellent Scope with more features that most will ever need. It has features on it that some years back were either not on scopes or only on research level gear that had many more 000's to the price - For all but the most demanding applications I am not sure why one would pay more.
Verified Purchase
Doug S on
May 08, 2015
Recommend to a Friend
Rigol DS1054Z
5.0
This oscilloscope is great. It might take a little bit to get used to finding some of the features in the menus, but for only $400 you are getting a very nice scope with a ton of features. The screen is also pretty large. I do wish that you could hide the side menus on the screen when not in use so that the displayed signal could take up more space on the screen, but that is only a minor issue.
Verified Purchase
Anonymous on
May 08, 2015
Recommend to a Friend
Amazing scope for the price can't do better
5.0
This is absolutely the best deal there is for an oscilloscope. you get more than the rest and you get 2 more channels too. Arrived fast from Tequipment too. 5 stars.
Verified Purchase
joe walmer on
May 08, 2015
Recommend to a Friend
Rigol DS1054Z
5.0
I bought this scope because of the rave review it got from Dave Jones on EEVblog and I must say I couldn't be happier. I was originally going to purchase the DS1052E, but after the reviews I'm glad I spent the extra $70 and got the DS1054Z.
The only problem I had is that one of the scope probes broke, the first day I had it. I put the clip on the probe and when I pulled it off the probe tip stuck in the clip and pulled off of the probe handle. I sent an email to Rigol and they are sending me a new probe.
Verified Purchase
Kevin Kennedy on
May 07, 2015
Recommend to a Friend
Great Price, Fast Shipping, NICE Scope
5.0
Ordering experience could not have been better. Shipped same day as ordered and arrived 2 days later. No charge, no tax, cheaper than through Amazon Prime account.
Have not had much time with the scope yet but very happy with initial impression of overall quality and ease of operation.
All the "optional" features are enabled on a trial basis for 32 hours so don't leave it running.
Verified Purchase
Blair on
May 06, 2015
Recommend to a Friend
Fantastic scope and an unreal value!
5.0
It amazes me what you can get for $399. I never expected the solid build quality, snappy screen updates, and measurement capability that this scope offers. Not much to complain about, perhaps some fonts could have been a little larger and some features get lost in the menus. Hard to avoid either with so many features crammed into this small package. Highly recommended.
Verified Purchase
Jimww on
May 05, 2015
Recommend to a Friend
Rigol DS1054Z Digital Scope
5.0
First off great turnaround by TEquipment on the order, placed on the 14, in my hands on the 20th.
I have been looking for a digital scope to supplement my Tek 2465a. After seeing the many positive reviews and comments on this scope I decided to go with it. I do not regret that decision. I haven't yet tested/tried all the capabilities this scope offers but so far it has stacked up well against the Tek scope. A slight learning curve on the controls and UI but after some use it becomes natural. There may be a few other quirks but the positives far outweigh the negatives.
I don't think you can go wrong with this scope if you are looking for a capable device for a great value.
Verified Purchase
DKS on
May 05, 2015
Recommend to a Friend
Rigol DS1054Z entry-level scope
5.0
Received my Rigol DS1054Z yesterday via UPS. Arrived on time and was in great condition. Calibrated the channel-one probe with the built-in square-wave signal generator and began testing some PWM controllers. The scope is a great little scope loaded with many features some of which I will probably never use. The feature I need are easy to find and understand. The measure button automatically provides detailed measurements about the signal and the statics option provides a wide variety of real-time monitoring metrics. The sampling rate is great for this price range, and the display and rendering are fast and clear. Included are four probes with grounding clip and spring-loaded end-hook. The probe ends are very sharp. My probe rings came in yellow, black, pink, and blue, rather than yellow, cyan, pink, and blue as are the colors on the scope. No big deal. You also get some additional parts with the probe for special situations. I wish it came with a little bag for all the parts and the probes. I will just go buy one at Walmart for $5. This scope is the best for the price range and can be upgraded.
Verified Purchase
Curtis Smith on
May 05, 2015
Recommend to a Friend
DP832 Impression
5.0
As advertised, a good well featured DC power supply.
Anonymous on
May 04, 2015
Recommend to a Friend
Outstanding For The Price
5.0
An incredible value for the orice, the ds1054z blows away everything in it's class. Besides a few little UI quirks, usability is very high. I wanted to make sure I got through several projects before writing a review and the overall impression was the ds1054z is a true winner for the general purpose scope crowd.
The only negatives I could find were the limitations on the decoder being stuck to screen buffer memory (turns out originally it was supposed to be capable of pulling from screen or memory), a few oddities with the UI (like not being able to fully remove measurements from screen without a power cycle or reset and the keyboard starting in Chinese while in English mode), and that a few of the probes had very touchy attenuation switches (sometimes not working at all on 1x. Fine on 10x).
Besides the quirky probes, the hardware is quite good. Dave's right, there may be some bugs, but the scope is overall very capable and especially so for the price.
Verified Purchase
Mike D on
May 03, 2015
Recommend to a Friend
Great service, price, and product
5.0
Very pleased with my DS1054Z purchased from TEquipment.com. First time owning a digital scope after many years with an old analog. There has been a lot floating around the internet about a hack for this scope, but the scope already being such a great deal, I went ahead and "purchased" all the software options, seeing that as being the right thing to do as a way of saying thanks for keeping the initial cost so low with the option of upgrading to some features that are great to have but not absolutely necessary for getting a job done. Really great scope. I've had it for a few weeks and having nothing bad to say about it.
Verified Purchase
TIM VAN DUSEN on
Apr 30, 2015
Recommend to a Friend
Feature Rich
5.0
I received this several weeks ago, I needed it sooner, but it was the victim of the shipping strike. Well, the need has passed, and today I opened the box, plugged it in, and spent about a half hour with it. It's going to take me awhile to gain some proficiency at operating this scope. However, my first impression is this is a feature rich instrument, especially at this price. I would feel more comfortable if each input had its own input adjustment, without the "switch then adjust that channel" arrangement found on this oscilloscope. Still, I think that's something I will get used to. So, for the price, I'm quite happy and haven't found any deal killers. It does everything I need, and I would definitely buy it again.
MagstarUSA on
Apr 29, 2015
Recommend to a Friend
Power Supply
5.0
Great power supply. Fun to use and all the features work great. I find the round keypad not a problem to use. Its nice to not have a rectangle key pad for once.
Anonymous on
Apr 29, 2015
Recommend to a Friend
great scope
5.0
To start: I like this scope a lot.
I just bought it last week.
It seems to work as advertized.
There are two things I needed to get used to:
1: The user interface is a little weird. I never read a manual, so I expect things to be intuitive. For example, when selecting a channel you get a pull-down menu, but it is hard to get out of that menu again.
2: There is no trigger input connector, like most scopes have. You have to use one of the 4 channels as a trigger channel. This is OK, but it does waste one channel in many cases.
The screen is very nice and high resolution. I think this is one of the better Tektronix knockoffs.
Verified Purchase
PHIL MARCHAND on
Apr 28, 2015
Recommend to a Friend
Rigol DS1054Z
5.0
I just got the scope and haven't used it much, but it seems really nice. There are a lot of features for such a low price. Very solid construction.
Verified Purchase
John Abbitt on
Apr 28, 2015
Recommend to a Friend
Rigol DS1054Z Digital Oscilloscopes Review
5.0
Great scope for beginners and home enthusiast. Grew up on the old analog scopes and what a difference using the Rigol digital scope. No more counting boxes, just look the readout and you get an exact value for most of the values want with one connection.
Highly recommend!
Bob D on
Apr 28, 2015
Recommend to a Friend
Great Scope
5.0
excellent value for the price. Can't beat it. No complaints whatsoever.
Verified Purchase
Roger Meli on
Apr 27, 2015
Recommend to a Friend
The BEST iron for the money!
5.0
Hands down the best soldering station I have ever had, especially for the price! Heats up within about 20 seconds to 800* and works perfectly! I love it!
Verified Purchase
EVAN WILLIAMS on
Apr 27, 2015
Recommend to a Friend
First experiences with the DS1054Z
5.0
After having used a competitor's scope for a few days on a trial basis, I bought the DS1054Z (untried) because of it has more channels, much more memory, and a better display, all for a lower price. The initial learning-to-use-it time was longer for the Rigol, but that is because it has so many more options for capturing and displaying a signal. After two calls to the Rigol tech support line I was on-track and doing more than I thought possible. The User Manual is very detailed, but could use a going over by a native English speaker. For example: "Turn clockwise to increase the position..." should be "...raise the position..." And "push the button continuously" should be "repeatedly." But all in all it is an excellent manual except for the term "Memory Depth" which has more to do with the display than the fixed 12M point memory.
Bottom Line: a great scope at a very low price.
William Gromen on
Apr 26, 2015
Recommend to a Friend
Affordable and easy to use
5.0
My first "real" soldering iron. This is quick to set up and easy to use. It preheats quickly to the set temperature and gets the job done.
No frills, but everything I expected!
Anonymous on
Apr 26, 2015
Recommend to a Friend
ds1054z
4.0
Great machine.Four channel for a great price Easy to use. Nice big screen.
Verified Purchase
Anonymous on
Apr 25, 2015
Recommend to a Friend
Fantastic First Scope!
5.0
Very happy with this purchase! I am a Hobbyist getting back into electronics again and figured it was time to get a scope. This Rigol DS1054Z is Great with lots of bells and whistles not found on any other scope. The four channels are a little over kill for me right now, But I'm sure I will glade I have them later. It was a little tricky to figure out what how to used it at first(who reads the manuals, Not me) But the green help button helped out with that. The only thing I'm not happy with is all of the coolest triggers are trail only. But still very happy with the scope Over all. Great first scope with very nice features at a price not touched by other manufactures.
Verified Purchase
Hammer on
Apr 24, 2015
Recommend to a Friend
Perfect Scope for a beginner.
5.0
I've been researching scopes for a while. This is an amazing deal. 4 channels for 399! It comes with a manual, however, there are tons of info online. There are some videos on youtube...I saw someone hacking the firmware to allow 100mhz. Cool!
It also has the capability for I2C - handy if you are into the Arduino platform.
Shipping was delayed a few weeks, however, I see TE has quite a few in stock as of this post.
Verified Purchase
skhan on
Apr 22, 2015
Recommend to a Friend
Hakko FX888D-23BY Soldering Station
5.0
This is an outstanding soldering station in terms of design and portability. It is very easy to both set and change temperature. The hand piece is light and the separate holder with sponge and cleaning mesh makes it simple to clean.
Anonymous on
Apr 20, 2015
Recommend to a Friend
Really nice scope for the price
5.0
I'm really enjoying my scope!
Verified Purchase
keith black on
Apr 20, 2015
Recommend to a Friend
Awesome PS - high value, great features
5.0
This is a great power supply that provides great features, at a low cost. Build quality is superb- and coupled with the $100 add-on, it can deliver and measure in 1mv/ma increments. I use this unit for delivering regulated power to Harris and Motorola public safety radios during maintenance and repair.
I like the display on the 832 better than the higher model 832A, which I find to be a bit more complex and unnecessary.
This is the 4th device that I have from Rigol - every one has been superb value for the money and every one of them compare favorably with my "lab quality" units from Agilent and TEK.
Whether you're just starting your test bench, or already have lots of equipment - these Rigol units are definitely worth a look. Although priced a bit higher than some of the other "economy" units, they perform very well.
Highly Recommended
Mike Lee on
Apr 19, 2015
Recommend to a Friend
Rigol DS1054Z - 50Mhz
5.0
The Rigol 1054z is a super, everyday bench scope!
This scope is a must have if you're working on electronics. A great addition to the shop.
Anonymous on
Apr 19, 2015
Recommend to a Friend
Fantastic Instrument for the $
5.0
This is a fantastic scope for $399. ! I'm just getting started, but the users manual and programming manual are well written and straight forward. (over 200 pages each) The capabilities of this instrument are amazing. my first digital scope was a Nicolet explorer III from 1978 it weighed 50# had a screen you could barely see in bright light, and had a whopping 2k record length storage was on a 5-1/4" floppy disc and it stored unformatted a total of 8 records! It had a max sampling rate of 500kHz ( 5 MHz with a special plug in. I did like the standard 12 bit vertical resolution. (I still have 2 of these scopes I resqued from the scrap pile.
Getting the beast to trigger on what you wanted was trial and error. Since I was recording utility switching transients that was a problem. Using them in the field (utility HV substation) was a bear. in 1978 the Nicolet cost 10k$! and that is 1978 $! Anyway, this Rigol is 0.1 x the weight and 1000x the capability, and has 4 channels not just 2.
I'll give a better review after I've put it through some paces. So far it seems better than the 4k$ Fluke or Tectronics portables I've used.
One down side , no internal battery power, But I can run with an inverter off my own battery.
Grace & Peace
Roy
Verified Purchase
Roy Alexander on
Apr 18, 2015
Recommend to a Friend
Neat scope
5.0
Really nice scope for the money!
Verified Purchase
keith black on
Apr 18, 2015
Recommend to a Friend
Guitar amp repair
5.0
Wonderful soldering unit! Perfect for a small shop. Very easy to change to different temperature seating. It heats up to the set range in matter of seconds, I would buy it again.
Alexander on
Apr 18, 2015
Recommend to a Friend
Great 4 Channel Oscilloscope
5.0
This oscilloscope it to replace my owon 60mhz 2 channel. I can't belive the detail compared to the owon. The controls are different but easy to understand. I have been using for about a week and recommend the DS1054Z to anyone who is looking for an entry level 4 channel oscilloscope.
Verified Purchase
Anonymous on
Apr 17, 2015
Recommend to a Friend
Best Soldering Station at Reasonable Price
5.0
Right out of the box I was soldering in minutes. This is a quality tool and would recommend to anyone especial for personal hobbies. TEquipemnt is also tops for customer service. I had a question on the presets and they were very helpful.
Verified Purchase
Shuttleman on
Apr 17, 2015
Recommend to a Friend
Top is its Class
5.0
Right out of the box I was soldering in minutes. This is a quality tool and would recommend to anyone especial for personal hobbies. TEquipemnt is also tops for customer service. I had a question on the presets and they were very helpful.
Verified Purchase
Tom Howard on
Apr 17, 2015
Recommend to a Friend
Best soldering device I've ever owned.
4.0
When I complained to my brother-in-law, an electronics techie, that my soldering irons always did a poor job, he recommended the Hakko FX888D. I took his advice and am glad I did. It heats up quickly and my soldering projects are so much better.
Davorco on
Apr 16, 2015
Recommend to a Friend
Quality Control
5.0
Very reliable. Precise temperature control. Heats up quickly. Currently using two of them. One at a business and the the other for home use.
Anonymous on
Apr 16, 2015
Recommend to a Friend
DS1054Z O-Scope
4.0
This Scope is an easy to use entry level 4 channel scope. Pro's are large color display, large buttons, multiple menus. Con's are vertical portions or square waves are not very clear and some of the language (text) is written in an unclear manner, hard to understand. Overall I would rate this product very good.
Verified Purchase
Curtis B* on
Apr 16, 2015
Recommend to a Friend
Scope Review
3.0
I think the scope is a great value. Works good and has many nice measurement features. However, one of the reasons I purchased this scope was for the I2C decoding feature which doesn't work properly. Rigol has acknowledged that there appears to be a bug in the software. Internet searches reveal other frustrated owners with similar findings. Rigol is not addressing the issue to anyone's satisfaction.
Verified Purchase
Jack Hammer on
Apr 16, 2015
Recommend to a Friend
Digital Soldering Station ESD Safe with FX-8801 ir
5.0
This soldering station is great! I use it almost daily; it heats quickly, is powerful, has quick & easy adjustments, and a nice stable body. Highly recommended.
Robert on
Apr 16, 2015
Recommend to a Friend
Great Product
5.0
The Hakko FX888D is definitely reliable and convenient. Heats up in about 30 seconds and gets plenty hot. The added caddy keeps the tip clean and ready for use. The wire going to the soldering iron is made with good rubber like material that won't get brittle on you.
Andyo on
Apr 16, 2015
Recommend to a Friend
Hakko FX888D-23BY
5.0
I've used Hakko in the past and recently needed a new iron. Outstanding price and quality.
Henry on
Apr 15, 2015
Recommend to a Friend
Impressive
5.0
Good unit. I was tired of using the cheap lab power supplies, and got this one. You can use the outputs in series for double the voltage. You won't find a better unit at this price, I searched for a month and this gets you a name brand product with great features and is very easy to use. I'll end up getting a few more of these.
Technosteve on
Apr 15, 2015
Recommend to a Friend
Bargain of the century
5.0
This Rigol O-scope is amazing and the low price makes it almost unbelievable. I have used the big "name brand" scopes at work that cost 10 to 20 times what this one cost and it is just as capable, if not more. And to top it off, some of my "maker" friends purchased a couple of these locally from another distributor and waited almost 3 months for it to arrive. I bought mine from TEquipment and got it in 16 days.
Verified Purchase
Mark Bolla on
Apr 15, 2015
Recommend to a Friend
Wonderful supply for the price
5.0
I really like being able to set the voltage before applying power to the circuit, something i couldn't do with my old analog supply. It's riddled with features, but still pretty easy to use.
Verified Purchase
Douglas Kennedy on
Apr 15, 2015
Recommend to a Friend
Excellent value
5.0
This is a great, easily portable scope with tons of functionality that rivals anything out there for twice the price. I had no problems getting it set up and configured, the menus are user friendly and intuitive.
Verified Purchase
John M on
Apr 15, 2015
Recommend to a Friend
Excellent scope for $400
5.0
Great functionality, light and easily portable, have used pretty much all the functions available and it works at least as good as scopes priced 2-3x higher.
Mugs on
Apr 15, 2015
Recommend to a Friend
Terrific Scope
5.0
Perfect scope for me as a home hobbyist. Now that I have it, I really believe this is the best value out there. The interface is a lot more intuitive than I expected. Intensity grading is awesome and feels just like my analog. Display resolution is very good and fast.
The only negative I'd have is that the PC software that came with it doesn't make a lot of sense. Not as easy to get working as I think it should be. But I don't think I'd need it much. A USB stick makes it simple to download data from it and works great.
Shipping was delayed a few weeks, probably due to demand, but TEquipment did a fine job communicating the back order status which was out of their control. Totally worth the wait.
Verified Purchase
Matt Dwyer on
Apr 15, 2015
Recommend to a Friend
Amazing Scope with Your Money
5.0
1) It is so compact that you can bring it anywhere with ease.
2) It is surprised such many function scope that only cost around $400.
3) I will definitely recommend to all electrical engineer friend.
Verified Purchase
MOUZHI DONG on
Apr 15, 2015
Recommend to a Friend
Can't beat it, especially for the price!
5.0
This is my first oscilloscope, and I'm really happy with it. Great features, the big screen is super nice, everything works great!
I could see someone pining for the Logic Analyzer, but personally I have not needed it.
colinta on
Apr 15, 2015
Recommend to a Friend
Amazing First Scope
5.0
This is my first scope, and so far I love it. It's packed with features. The I2C decoder works great for my small projects! Highly recommend.
Verified Purchase
Tom Young on
Apr 15, 2015
Recommend to a Friend
Great little scope!!
5.0
This is not my first scope, but if you're thinking about buying it as your first scope, don't hesitate! It's a great scope, especially for $400!! The only bad part is these things are so popular, you might get upset waiting for it to arrive!!!
Verified Purchase
Tony Karavidas on
Apr 15, 2015
Recommend to a Friend
Wonderful Product!
5.0
This solder station is excellent quality and extremely easy to achieve and maintain a precise temperature. The digital display and presets makes it simple to make sure your soldering iron is set at the correct temperature for the project you are working on. Stand is very sturdy. Overall, an incredible value.
Dennis on
Apr 14, 2015
Recommend to a Friend
Rigol DP832/Programmable Power Supply
5.0
We are currently using for are new project and it succeeds all are expectations.
Verified Purchase
Ron Duran on
Apr 14, 2015
Recommend to a Friend
Hakko FX-888D
5.0
I have been using a foreign clone of the older Hakko for a few years now and it did a good job for me. I found that it couldn't keep up with me on it's recovery and I had difficulty with some of the clone tips. I ordered the Hakko FX-888D and immediately noticed the difference. It gets up to temperature quickly and recovers well. The presets let me move up and down quickly if I need.
I have been using genuine Hakko tips with it. They tin up beautifully and are easy to keep clean.
This is a great little soldering station for just a few dollars more than an imitation.
Kevin Youngberg on
Apr 13, 2015
Recommend to a Friend
Rigol DP832/Programmable Power Supply
5.0
We our currently using the Power Supply and we find
that it succeeds all our expectations.
Verified Purchase
Anonymous on
Apr 13, 2015
Recommend to a Friend
DP832
3.0
For the price, it is a nice performer.
The screen is very hard to read and the entry control system is awkward. The fan is noisy and comes on at low power. But, as I said, the price is right.
Anonymous on
Apr 13, 2015
Recommend to a Friend
Fantastic Scope!
5.0
The DS1054Z is a very high quality piece of equipment and I would certainly recommend it to anyone looking for an entry level scope but not wanting to shell out the cash for the higher-end models. Although, do not let my words fool you, this 'scope is packed with a great deal of the features you find on these upper-end scopes too! The 7" screen only makes it that much better.
The only "bad" thing I have to say about this model is that the cooling fan is a bit loud if you are in quiet room - maybe a little louder than the average desktop PC.
Verified Purchase
Branden Sherrell on
Apr 10, 2015
Recommend to a Friend
Hako Soldering Station
5.0
Hako soldering station works as advertised and works well. Seems to be very well built, well designed and does a fine job on any soldering application I can fine, from fine work to power wires. Only real downside is tips and so-forth are relatively expensive for what you get. Other than that, no complaints. Unit is at a fair price point. Recommended.
Verified Purchase
scotty h on
Apr 10, 2015
Recommend to a Friend
Awesome value scope!
5.0
This is an awesome scope, incredible value for the price, 4 channels, 4 high frequency probes, awesome functionality. This is the best scope you can buy for under 400, no question about it.
Verified Purchase
Tim on
Apr 10, 2015
Recommend to a Friend
The new "First" Oscilloscope.
5.0
The Rigol DS1054Z is an exceptional 4 channel oscilloscope, decent bandwidth, and a beautiful screen. Despite the two month wait which was caused by a supply issue with Rigol (Not tequipment) after receiving the unit I put it right to work in the lab. Any annoyance at the wait was gone after experimenting with the features, previously I had access to a two channel techtronix set up which was great but having the two extra channels made sampling multiple points easily, accelerating troubleshooting. For the price, with the specs and built in features this really is a no brainer. While there is something nostalgic using a massive old school analog scope, the smaller digital scopes have easier to read screens with awesome built in functions.
The search is over. Looking for your first scope - this is the one you want.
-CP
Verified Purchase
Corey Palmatier on
Apr 10, 2015
Recommend to a Friend
Rigol DS1054Z Comments
5.0
What more can be said that has not already been said praising this unit. It is great. A couple things that I noticed were as follows:
1) the "Hook Clip" probe extensions have to be pushed on rather firmly until they click in place; I am apparently not the only one that didn't feel comfortable pressing them on as hard as they needed;
2) the "Measure" variables that can be put on the bottom of the screen are great until you try to remove them; I found where they can be "Deleted" but they stay in position greyed out. I haven't found yet how to get rid of them and bring up variables in a different order. Perhaps setting to the Factory Default will do that, but that should not be required.
These are admittedly very minor items and the scope is just what I needed, lots of functionality at a reasonable price.
Verified Purchase
Anonymous on
Apr 10, 2015
Recommend to a Friend
Love this scope!
5.0
This is a great scope at a great price! I was able to operate it right out of the box and am getting much use out of it. The user interface is simple and intuitive. The manual is a bit weak. I have not messed with the PC software yet. I got rid of 3 "big iron" scopes and upgraded to the Rigol. It's amazing how many features it has! Delivery took a while, but I am glad I waited. They are in high demand.
Verified Purchase
Ernest Stedman on
Apr 10, 2015
Recommend to a Friend
Excellent Scope! Great Value!
5.0
A truly excellent scope, and that's before we get to the price! Which is insane.
The screen is clear, bright, and large. The functions, such as measure, are clearly labeled, intuitive, and easy to use.
Highly recommended!
JG on
Apr 10, 2015
Recommend to a Friend
The best !!!!!
5.0
Grand oscilloscope . Good cost- benefit ratio . It incorporates many features that other teams do not have the same price .
Verified Purchase
Carlos Alex Macias on
Apr 10, 2015
Recommend to a Friend
Great Value
5.0
My time with this oscilloscope so far is limited, but it has been great for the small tasks I have used it for so far. There are many features to explore. It has a good quality feel and it is vastly more capable than the analog scopes I learned on. Really can't go wrong at this price.
Verified Purchase
Jake on
Apr 10, 2015
Recommend to a Friend
will buy again from tequipment
5.0
I have not used it yet, but the product arrived in excellent condition. I ordered a bunch of other things from TEQUIPMENT. Their pricing is better than most. Their customer service was efficient and helpful. The whole experience was great.
Verified Purchase
Rishabh Kasliwal on
Apr 10, 2015
Recommend to a Friend
Good Scope
5.0
This is a very portable and reliable scope easy to calibrate and setup.
The display is excellent and the automatic features rapidly bring in the results
Artful on
Apr 10, 2015
Recommend to a Friend
great 'scope
5.0
This is a terrific little 4 channel storage oscilloscope for money. Intuitive menus make this quite easy to set up and use. For a hobbiest like myself this is an excellent choice.
Bocamo on
Apr 10, 2015
Recommend to a Friend
Very satisfied
5.0
The only way I could be happier with this product is (1) If the upgrades and options were more sensibly priced, and (2) if it accepted a 12V power source. I am off the grid and don't like jacking 12V up to 120V just to have the instrument jack it right back down.
Todd on
Apr 09, 2015
Recommend to a Friend
Amazing value
5.0
This scope is amazing! It does everything that most people will need, and well. I've got an Agilent on my desk at work that cost 35x as much as this Rigol, and there are some things that the Rigol actually does *better*. I would recommend this to any hobbyist or professional looking for a good oscope who doesn't need to observe extremely high frequencies.
Verified Purchase
Anonymous on
Apr 09, 2015
Recommend to a Friend
DP832
3.0
This power supply works fine. The software needed to be updated, because the system was displaying some bogus information. The software update worked flawlessly, which is not always the case for Rigol's products. Basically you get what you paid for.
Marcel on
Apr 09, 2015
Recommend to a Friend
rigol ds1054z
5.0
pretty awesome little unit for the price. 4 channel scope, plenty of memory, 4 probes included. a lot of people complain about the fan noise but i have a ps3 sitting next to me and it's about twice as loud as this, I don't consider the noise to be a problem at all. tequipment has replied fast to all my email questions. I would recommend this scope and site to any of my friends.
Verified Purchase
Andres Ortiz on
Apr 09, 2015
Recommend to a Friend
Great product
5.0
Excellent product, really improves space and cost with the 3 channels of this PPS. Highly recommend this item.
Miguel on
Apr 09, 2015
Recommend to a Friend
The Ham Radio Guy
4.0
The most awesome soldering iron I have ever owned. Stable at any temperature. Quick recovery. The only thing that might throw people off at first is using it to its fullest capabilities especially if they are the type to not read the manual. To these people I say, "Read the manual carefully and then refer to it as you tailor this awesome iron to your needs."
Beware of imitators. There is a country that is making cheap knockoffs of this soldering iron. That tells you how popular this iron is all around the world.
I bought mine here because their price was the cheapest
An engineer friend of mine first told me about this iron, and it is just as great as he described to me.
The on
Apr 09, 2015
Recommend to a Friend
Rigol DS1054Z Scope
4.0
Great product. Was able to download and install software update to upgrade to a DS1104Z.Very high marks on the hardware but the Rigol operating software and manuals leave much to be desired. If only Rigol could outsource their software and documentation to the USA.
Jeff on
Apr 08, 2015
Recommend to a Friend
mr
5.0
I have had to use old Weller stations in the past, and just discounted this type of iron as lacking. I was talked into this one, and I'm very impressed! I get more done quicker, and can trust the tip to be "spot on" at the temperature I want, without cooking the tip so every time I want it I don't have to sand and re-tin! I don't know what I would want that would do better! super tips too!
Bruce on
Apr 07, 2015
Recommend to a Friend
Very good quality soldering station
5.0
Nice product, quality looks very good.
It has a nice thermal mass and solders very well.
I would have liked a knob for setting the temperature instead of buttons.
Verified Purchase
Mircea Dan Gheorghe on
Apr 07, 2015
Recommend to a Friend
Rigol DS1154Z
5.0
Great scope at a ridiculously low price.
Tony B on
Apr 07, 2015
Recommend to a Friend
Rigol DS1054Z Oscilloscope
5.0
Impressive instrument that exceeds my expectations. Especially noteworthy is the bright, high definition display. I was looking for a basic, low cost 4 channel scope for analog use and found TEquipment.net. Pleasant purchase experience, free on time delivery as promised followed by a post sales satisfaction check and support pledge. Very pleased with my new scope and TEquipment.
Frank Z. on
Apr 07, 2015
Recommend to a Friend
Best soldering station ever
5.0
I use this in my field service kit and this is the best station I have owned so far and I've owned several Hakko stations, heats up fast and is small and portable.
Verified Purchase
Robert Spoon on
Apr 04, 2015
Recommend to a Friend
Best Scope for under $400.00
5.0
With the new firmware that fixed some major issues this scope is amazing for the price. It also has upgradable options that can be purchased and added at any time. Easy to use and seems very accurate.
I don't think you can find a better scope for the price.
Verified Purchase
jkrichards on
Apr 03, 2015
Recommend to a Friend
DP832 Leaves nothing to be desired
5.0
Controls are intuitive (except for entering options codes), display is well organized, voltage output is well within spec (according to my DM3068), fan noise is ok and all the features I've tried so far work flawlessly. The DP832 is an easy-to-recommend bench supply for precision power needs - I've been using it for mostly 3V electronics and the precision output for testing brownout conditions are exactly what I needed. It's so nice not to need a multimeter to verify the voltage on the P/S anymore.
Verified Purchase
Nathan Crum on
Apr 03, 2015
Recommend to a Friend
Is there a downside to this P/S?
5.0
There's not a lot to say about a product when everything "just works". Controls are intuitive, voltage output is WELL within spec according to my DM3068 and I haven't any issues yet. My only potential gripe is that the fan is a bit loud at full output and only acceptably loud/quiet at idle where it's fairly similar to the noise of my MSO4014. At least it's just a "whir" though and not a rattle. All things considered - it's a top notch P/S and I'd highly recommend for anyone needing a precision bench supply.
Nathan C on
Apr 03, 2015
Recommend to a Friend
Best Soldering Iron I Have Used!
5.0
It is always an enjoyable experience soldering with the Hakko FX888D-23BY. The iron heats up quickly and does not take up much space at all. The tips are very high quality and hold the temperature needed. I believe this to be the best iron for someone with experienced or novice soldering experience. The labs at my college even carry these same soldering stations for students to learn how to solder properly.
The item was well-packaged and shipping was fast. Also, the price was the lowest. Thank you!
Verified Purchase
DCB on
Apr 03, 2015
Recommend to a Friend
Rigol is now the leader in the market!
5.0
this is my first digital scope, and it is just too incredible to say, just buy one and use it. For the price you can't beat it! I like the one button press to save an image to a flash drive. So buy one the people at Tequipment are great and they will treat you right, oh yeah and free shipping, what a deal. Come on 400 bucks for 4 channel digital scope 50 MHz that can be easily hacked to 100 MHz and be able to keep all the trial stuff for free, hackers gotta love'em. this scope comes HIGHLY recommended by me!!!
Mike on
Apr 03, 2015
Recommend to a Friend
Just buy it.
5.0
Great oscilloscope best quality/price unit on the market.
You just must have it. Model ds1054z so popular that stores usually have empty stock and only way get it is preorder. Don't waste your time: need o`scope you have 400$=buy Rigol DS1054Z (then crack it and have DS1104Z and save 430$) profit
http://mysku.ru/blog/usa-stores/29367.html
sairus on
Apr 03, 2015
Recommend to a Friend
Great Soldering station
5.0
great product
Anonymous on
Apr 03, 2015
Recommend to a Friend
Rigol DS1054Z
5.0
Everything you've read about this scope is true. Amazing feature set for an incredible price. Fast service and shipping.
Verified Purchase
Ken on
Apr 03, 2015
Recommend to a Friend
DS1054Z
5.0
Rigol DS1054Z is the best value and a great o'scope for the bench. Easy to use!!! I find myself using the scope more than before.... TE Equipment is the first call for price, customer service and delivery.
Anonymous on
Apr 03, 2015
Recommend to a Friend
Great scope for the buck
5.0
Great scope with tons of features. Checkout eevblog video if you are unconvinced.
Chromguy on
Apr 03, 2015
Recommend to a Friend
Excellent Scope
5.0
This oscilloscope offers excellent features at an astounding price. Look no further for an entry level scope.
Verified Purchase
Spencer Davis on
Apr 02, 2015
Recommend to a Friend
Excellent Product and Service
5.0
This scope performs very well for its cost. It provides many useful measurement features and is easy to learn to use.
Anonymous on
Apr 02, 2015
Recommend to a Friend
Great scope but Tequipment was frustrating!
4.0
My Rigol DS1054Z arrived today after a frustrating wait from TEquipment.NET. I had six estimated ship dates. I don't recommend buying from them if they don't have the product in stock. The scope looks good and works well. There are even upgraded features that will work for 36hrs. The extra features clock ticks down only while the scope is powered on, so you can stretch out the trial period for weeks or months.
I ordered the scope on the 15th of December. The fact that it arrived 7 weeks later doesn't bother me much. Let your customers know that it will take about 8 weeks before they see their new equipment arrive. Do not move the estimated ship day around more than twice after setting the initial ship date. And never let the estimated ship date enter the past! Below is a list of my actual estimated ship dates (ESD) in order.
12/15/2014: Ordered my scope
12/16/2014: ESD 12/31/2014
12/22/2014: ESD 1/20/2015
1/5/2015: ESD 1/5/2015
1/16/2015: ESD 1/16/2015
1/19/2015: ESD 1/26/2015
1/22/2015: ESD 1/22/2015?
TEquipment.NET response: Thank you for your feedback. I share with you the frustration with getting this unit on time. The multiple updates is noted as well. The port strike or slowdown delayed shipments up to 9 weeks longer than usual. We had units sitting on the dock for months. As we were getting updated we were sending these to our customers. In addition to this our normal 8 week lead-time to get items from Rigol ended up being 14 weeks plus the port delays on top of this made this item very difficult to nail on the lead-time. We did however finally get ahead of these issues this week and have lots of stock. The port slowdown has lifted as well.
Jason M. on
Apr 02, 2015
Recommend to a Friend
DS1054Z
5.0
The service and support from TEquipment was great. I had questions, they had answers with no run around answers. The DS1054Z is a great value and I recieved it in perfect condition. You cant beat the price for this scope. I will be shopping here again.
Autotech1975 on
Apr 02, 2015
Recommend to a Friend
Ceo
5.0
I love it!! Very Fast Heating, with all adjustable heat control very nice. Fast delving to boot just 3 days .Cost was five below the norm, nice job gang. I have told all my friends about this too.
Tim Burgess on
Apr 01, 2015
Recommend to a Friend
Great Scope
4.0
Scope is well equipped. Works great!
Verified Purchase
galaxgirla on
Apr 01, 2015
Recommend to a Friend
Rigol Power Supply
5.0
Good bench power supply. I like the user interface and controls. Would consider using them in a rack based tester as well.
john cox on
Apr 01, 2015
Recommend to a Friend
Excellent Purchase
5.0
Nothing can beat this oscilloscope in price vs. performance relation! I'm very happy with it. =D
Anonymous on
Apr 01, 2015
Recommend to a Friend
Excellent Scope!
5.0
I highly recommend this scope if you are going to purchase your first scope. I picked one up for school and personal projects and its worked great so far. I haven't had the chance to test everything out yet but so far it has done the simple things well. If you thinking of getting the DS1052E don't bother, this scope has 4 channels and a high res. screen that is actually pretty nice to look at. If you havent done it already, check out the EEVBlog review by Dave Jones on Youtube. Also, shipping from Tequipment was fast, like 4-5 days from the day I ordered it fast(shipping sucks where i live). Would order from here again. *Educational pricing was a nice bonus as well*
Verified Purchase
Anonymous on
Mar 18, 2015
Recommend to a Friend
Great power supply for the money
4.0
I have been using this power supply for a few weeks now and I so far I like it. The interface might seem a bit weird at first with the ring of number buttons, but it works pretty well once you've gotten used to it. Based on the limited test gear that I have, it appears to be well within its claimed specifications. I've been able to leave it for long periods of time (2 hrs) outputting ~60 watts out of two channels without issue.
The only issue I have with this power supply is the calibration date. I understand that there will be some time lost due to shipping and time in a warehouse, but the unit I received will require calibration only 2 months after receiving it. I don't care that much about the calibration because I'm using this for my electronics hobby, but I'm sure some people will.
Verified Purchase
Garrett Ingram on
Mar 18, 2015
Recommend to a Friend
Rigol user
5.0
I received the Rigol DP832 and Fluke TL221 yesterday, in good condition, opened and examined parts and components. Today I installed the HI-RES license key and am proudly well on my way to repairs that have been waiting on my bench. Thanks to the folks at TEquipment for the quotes and great prices.
Verified Purchase
James Krivitsky on
Mar 18, 2015
Recommend to a Friend
Great Buy!
5.0
You absolutely cannot beat the performance for the cost! This is a no brainer. Why are you even looking at the reviews?? Just get it!
DW on
Mar 18, 2015
Recommend to a Friend
Fantastic Soldering Station
5.0
I've been soldering since I was 12 years old with all sorts of different irons and setups. I've been using a cheaper weller for the past 10 years, and the Hakko blows it away. It is built extremely well, and heats up to full temp in 30 seconds (I counted). Youll be amazed at how much better things work with a real station like this than a cheap one or a cheap iron.
Verified Purchase
Aaron Morris on
Mar 17, 2015
Recommend to a Friend
Cheap and useful
5.0
This soldering iron is perfect! Hakko always innovating and making it better.
Verified Purchase
Anonymous on
Mar 11, 2015
Recommend to a Friend
Rigol DS1054z
4.0
Upon opening this affordable oscilloscope, I was very impressed with its size and specifications. Upon first use, I found it to work very well in biasing a solid state power amp. The signal was clear and clean. I would like to make the trace signal even thinner, but can't ask too much for the price point. While working on a voice board for an analog synth, I got to know this scope even better. The self-calibration is very useful as well as the depth of detail necessary to adjust a 300 mVp-p signal. It did require a little bit of reading the manual, but the controls are user friendly for anyone who has worked on other scopes. I say this is a great entry-level oscilloscope with plenty of options.
Verified Purchase
Shane Radtke on
Mar 05, 2015
Recommend to a Friend
Scope bargain of the year!
5.0
I heard about this 'scope from a Facebook group post, and when I checked out the link, I ordered it immediately, as I knew that the price was amazing. A colleague owns some other pieces of Rigol test equipment, and has been very happy with them, so I didn't think I was taking much of a chance with this 'scope. I received the 'scope, started using it, and have nothing but good results. 4 channels, fast and DEEP sampling, bright, sharp screen all contribute to a great usage experience. The 'scope comes with 4 switchable 1x/10x probes, and is USB connectable to a computer. I use mid-range Tektronix 'scopes for work, and this Rigol is very comparable in the important aspects, and has a much deeper sample memory, allowing high-resolution zoom. As I said in the title - 'scope bargain of the year!
Verified Purchase
David Telling on
Feb 22, 2015
Recommend to a Friend
Digital Soldering Station ESD Safe with FX-8801 ir
5.0
Heats up quickly, accurately and maintains steady temp.
Verified Purchase
Kevin Colvin on
Feb 20, 2015
Recommend to a Friend
Great quality scope at reasonable price.
5.0
I love this scope. I also own an Owon MSO7062TD and a Quantasylum QA100 and the Rigol is very high quality and software is stable. For general use (something like automotive electronics development with microcontrollers) this scope is perfect.
Schnibb on
Feb 19, 2015
Recommend to a Friend
Great for the price
5.0
I'm loving this scope. It's my first one and so far hasn't let me down. It's easy enough to learn and since there's already a huge community of other novices using them, there's plenty of people online willing to help. It comes with 35 hours of trial time on all of the extra features, which for me is going to end very soon, so hopefully it's still "just as good" after I lose those features.
For the price it's a no-brainer.
Verified Purchase
Evan on
Feb 19, 2015
Recommend to a Friend
DP832 Power Supply
5.0
Just purchased the DP832 a week ago... I was initially worried about what looks to be kind of an odd interface for number entry but was proved wrong. Have used the the supply several times with different loads and it has been very easy to use. Accuracy of the volts and amps appears very accurate. Attached the output to my electronic load and both units agreed on voltage and current measurements. Is also nice to have watts calculated and displayed. Need to explore some of the logging capabilities of the supply. Pleased so far with the purchase.
Verified Purchase
Dan on
Feb 17, 2015
Recommend to a Friend
Thanks for the serviceTequipment
5.0
Great service from Tequipment and the DS1054Z was just what I was expecting and it was here in less than 3 days. I will definitely be ordering from you again!
HB
Verified Purchase
Anonymous on
Feb 14, 2015
Recommend to a Friend
Great Scope Great Value!
5.0
I am a hobbyist/educator. I am very impressed by the quality and feature set of this oscilloscope, particularly relative to the price and other units on the market. It will take me a while to work through all of the features. Yes, the sheer number of features can make some of them a little tricky to figure out, but I do not see this as a major problem. The manual is adequate, but not stellar, but I find I can still figure out what I need from that plus Google plus a little trial and error. Some people have mentioned that it is noisy. You can definitely hear it running, but I would not describe it as overly noisy. Overall, this unit more than meets my needs and expectations. This is an easy one to rate 5-stars.
Verified Purchase
Anonymous on
Feb 11, 2015
Recommend to a Friend
Good quality
5.0
Stable, fast, sturdy and cheap!
Verified Purchase
Anonymous on
Feb 09, 2015
Recommend to a Friend
Pro scope at budget price!
4.0
Professional grade 4 channel scope at a starter scope price! This unit is way beyond my expectations. Fairly quick and very accurate. Reasonably easy to use user interface, nice screen and a small workbench footprint. User manual can use some more detail, but otherwise very informative. My main gripe I have (as well as other reviewers have) is that the controls need to have a firmer detent to instill some confidence in quick setting changes. Not a biggie, but its something that could use improvement. Another issue I would like to see improved is the refresh speed of the UltraScope software when connected to a pc via USB.
If you have a version of the scope that was manufactured in 2014, be sure to apply the latest firmware update that addresses the jitter issues. Mine is new from the manufacturer (Jan 2015) and has no issues whatsoever. The biggest issue of this scope is to find it in stock! These things sell out FAST! Tektronix needs to watch their back!
If you are a hobbyist, a student or someone just looking for a good scope that won't break the bank, you can't beat it!
Verified Purchase
Dusty on
Feb 08, 2015
Recommend to a Friend
Can't be beat for a first scope!
5.0
After reading A LOT of reviews online about this scope, I purchased it without any regrets. It really is the best value scope for a beginner wanting to get serious.
The only dislikes I have about it is the fan is more noisy than I like and the small rotary encoders feel like they have no detents in them. Not bad enough to remove 1 star but still less than perfect.
Verified Purchase
Rob on
Feb 05, 2015
Recommend to a Friend
Perfect scope for the electronic hobbyist
5.0
As an electronics technician I used scopes on a daily basis back in the 80's. The cost of a decent oscilloscope prohibited the purchase for personal use. Then Rigol came out with this feature packed, low cost scope. This is exactly what I needed for my home electronics bench, no regrets.
Verified Purchase
KEN KIRKPATRICK on
Feb 05, 2015
Recommend to a Friend
Excellent scope
5.0
I got it yesterday and worked out of the box. Quality is good for the price. There are so many functions available for one to use.
I wish I had bought one with logic analyzer.
Verified Purchase
Alok Bhargava on
Feb 04, 2015
Recommend to a Friend
Awesome scope for the money...
5.0
Just look at the specs... read the online reports. This scope is awesome! its 4 channels, 50MHz (up-gradable to 100) BW, digital phosphor...
For what I use it for (primarily fixing old arcade games) its perfect.
Verified Purchase
Tim Iskander on
Feb 04, 2015
Recommend to a Friend
THE New Entry Level Scope
5.0
The DS1054Z replaced my DS1052E and I am very happy with it. There are plenty of reviews available, so I will comment on a few things that I personally like.
The overall feel of the instrument is quite good, with easy to operate controls and more functions exposed via buttons. It is a bit heavier than the DS1052E so button presses don't seem to move it around as much. They moved the power button to the front, which is good because I could not get to the top button on my shelf-mounted DS1052, but bad because the unit slides around when you press the front button unless you hold it with two hands.
Of course, the larger display is the big upgrade. It is a lot easier for my tired eyes to read.
While I will eventually read the manual to understand what this instrument can do, I found it very easy to just plug it in and start using it
Verified Purchase
Anonymous on
Feb 04, 2015
Recommend to a Friend
Nice but not Tektronics nice
4.0
Being able to upgrade to the higher spec functionalities is nice. The user interface is a little confusing, switching between 4 probes. The plastic casing is average, doesn't look like it would last if moved around too much. The screen is nice and big with good clarity and viewing angle. The probes are just adequate.
Verified Purchase
Anonymous on
Feb 04, 2015
Recommend to a Friend
Best 4 channel scope
5.0
I just received my Rigol 1054Z and have to say that I am very pleased with the performance and construction. At work I have access to many scopes from Tektronix, and Agilent (now Keysight). While this scope cannot compete with these high end models in bandwidth , it blows them out of the water in the price/performance category. I know of no other 4 channel scope that can even come close.
Verified Purchase
Tom Kelley on
Feb 04, 2015
Recommend to a Friend
Great Scope
5.0
If you need a good scope and are on debating which one to buy, look no further. This scope is great value for money and is very well documented and reviewed. Check out Dave's review at eevblog and others on youtube. There is a reason everyone is picking them up. Get on the list and get one for yourself. 399 for a 4 channel quality oscilloscope, enough said.
Verified Purchase
Raymond Adams on
Feb 04, 2015
Recommend to a Friend
Great scope
5.0
Great scope, great specs, interface (buttons and menus) MUCH improved over the 1000e/d series. Insanely good value for money!
Verified Purchase
Anonymous on
Feb 04, 2015
Recommend to a Friend
Incredible value
5.0
I haven't used an oscilloscope since an analog one in college. The features and findings offered in this box is simply amazing. I've used it extensively and everything works extremely well. I love the compact form factor. It does make access to few things a little cumbersome but I Rigol choose well in the trade-offs that had to be made to get a four channel scope in such a small package. If you considering an oscilloscope but this one.
Verified Purchase
Michael Officer on
Feb 04, 2015
Recommend to a Friend
Took a while but worth the wait
5.0
It took a few weeks to come back in stock at TEquipment, but as soon as they got it, they shipped it out and it came quickly. This is a fantastic scope. Build quality looks good, UI is good, and I couldn't be happier, especially for TEquipment's great price.
Verified Purchase
Nick Triantos on
Feb 04, 2015
Recommend to a Friend
Great Product
5.0
I just received my new Hakko FX-888D Soldering Station today. I have never used Hakko before but I have heard nothing but good things about them. I haven't really had a chance to use this yet, but I can tell just by looking at it and handling it, that it is well made and it also has some weight to it. There is nothing cheap about it and I think it gives Weller a good run for the money. It looks like a great product.
Verified Purchase
Edwin Karges III on
Feb 03, 2015
Recommend to a Friend
Great Scope for the Money!
5.0
Own and operate a small electronics start up. Got my first Rigol product (power supply) a little over a year ago and needed to add an oscilloscope to my arsenal of lab equipment. Received this scope a week ago and I could not be more happy with it. Great product and quality that I have come to expect with Rigol!
Verified Purchase
AK on
Feb 03, 2015
Recommend to a Friend
Beginner, loving it
5.0
I haven't had much experience with oscilloscopes before I bought this, but I bought this because of Dave's recommendation from the EEVBlog. The scope has a very useful help feature that explains all of the features with both text and graphics, an awesome feature for a beginner.
Verified Purchase
Peter Slater on
Feb 03, 2015
Recommend to a Friend
Awesome scope!
5.0
I was set on buying a Tek, but after all the glowing reviews on the EEVBlog, I decided to bite the bullet. All I can say is wow, this thing is great. It's really nicely built, has everything I need, and I never thought I'd have a (recent) 4 channel scope for this price. I haven't put it through its paces yet, but it looks like it'll handle everything I'm planning to throw at it, and then some.
Mine was the newest batch (late Jan 2015) and I don't see any jitter issues. Haven't checked yet to see if they included the most recent firmware for me, but it's holding steady. All in all, a great scope, and if you're just moving to a digital like me, it'll hold you over for most things. TEquipment was awesome and kept me posted, and the free voltage tester is actually one of my favorite new tools.
Verified Purchase
DC on
Feb 03, 2015
Recommend to a Friend
No Brainer
5.0
This is the best bargain in oscopes by far. The measures bandwidth out of the box it over 90mhz. The features and functions are mind boggling to find in a scope at this price. The biggest problem is they don't stay in stock for long you must act fast to get one.
Verified Purchase
Anonymous on
Feb 03, 2015
Recommend to a Friend
great product, authentic, good price!
5.0
This is a fantastic, basic digital-controlled soldering station that simply works well. Temps seem very stable, and the 30 second warmup time makes it completely feasible to use it stop-and-go instead of always on. After determining I wanted this model, and searching around for prices, Tequipment.net had the best price for an authentic Hakko machine. Sure, there were slightly cheaper versions available from direct-from-China vendors, but many of those are undoubtedly clones or copies, and not authentic Hakko originals. Furthermore, they would also take 3-4 weeks to arrive whereas I got mine in just a few days by free UPS Ground from Tequipment.net (I added a few spare tips to break the $100 free shipping. Anyway, I'm happy I finally made this purchase, and I expect to get many years of good use out of this.
Verified Purchase
MarkB on
Jan 27, 2015
Recommend to a Friend
A lot of scope for the money.
5.0
My unit had the dreaded jitter problems upon arrival, but with the new firmware update, those seem to have gone away. All told, very happy with this purchase. It does a lot; much much more than my old DS1052E, so my only real complaint would be that it's taking some time to learn how to use all the new fancy features. As problems go, I'll take that one any day.
Verified Purchase
Joseph P. on
Jan 22, 2015
Recommend to a Friend
So far so good...
5.0
Replaced my aoyue with a 888 and it has been great so far. heats up quickly, remembers the temp settings (unlike the aoyue).
Verified Purchase
Tim Iskander on
Jan 20, 2015
Recommend to a Friend
Real Nice
5.0
What can I say, this unit is fantastic. Worth every penny.
Joseph Flammia on
Jan 19, 2015
Recommend to a Friend
Everyone's right - best value
5.0
The positive reviews you are seeing here and places like EEVBLOG are true. This is an amazing piece of equipment. If you're debating between this and a cheaper unit, this is the one to get.
I've only used analog oscilloscopes in the past, yet the learning curve for the 1054Z is minimal. If you're familiar with using oscilloscopes/theory, you'll have no trouble learning it.
Everything you'd expect is there plus so much more. Single sweep mode is especially useful for inspecting digital signals you'd never catch on an analog one. Many automatic measurement options are available - Pk to Pk, RMS, rise/fall time, frequency, etc. Optional decoding features seem to work well, so far I've only tested i2c and had no trouble decoding.
Price is very reasonable considering all that you get. You'll find 4 probes, usb cable, software cd, manual and calibration certificate in the box.
Verified Purchase
John on
Jan 18, 2015
Recommend to a Friend
Great product for the price
5.0
This scope is great for a little more than a starter price. The four channels are awesome and the measurement functionality works well. So far there are only two specific nuances i noticed.
1. The menu botton on the top left corner of the screen only seems to switch between what type of measurements are shown next to the buttons (horiozontal, vertical, etc). It seemed like there could have been more functionality to it.
2. When zooming on a trace the cursor measurements do not follow onto the zoomed section, they are only visible on the main traces.
Otherwise this scope seems to be an awesome grab for the price. It is nice and small so it does not use a lot of desk real-estate. It has a nice clear screen. The buttons are fairly easy to navigate and use. Looking forward to test it even further. Have not had a chance to try the PC software yet.
Verified Purchase
Anonymous on
Jan 12, 2015
Recommend to a Friend
Currently the best value scope
5.0
I bought this to replace the DS1052E. As others have mentioned there is extensive discussion of this scope on the EEVBlog forum. Rigol does seem to read the forum and has released new firmware to address problems that users have found with this scope.
I should note that lead times on this scope are fairly long at this point (up to two months perhaps) due to high demand.
I would highly recommend this product.
Tequipment Response: As of 1/9 we have 400 units coming into stock in 11 days.
Verified Purchase
Chris King on
Jan 09, 2015
Recommend to a Friend
EEVBlog Dave made me get it
5.0
The build quality on this instrument is top notch. It feels heavy, substantial; won't slide around the bench. The knobs and buttons are quality and nothing on this scope feels cheap. The fan is a bit loud, but is not too distracting.
It is also small, no larger than the DS1052E it was designed to replace. It has a very nice high resolution widescreen LCD as well. For the most part the menus are intuitive and well designed. The four probes are decent and have a 150MHz bandwidth.
Get the latest firmware from Rigol and update this scope -- it completely fixed the AC coupled trigger jitter and the 5us jitter problems that have been discussed on the eevblog forums.
4 channels, up to 1Gsps, 50MHz, with options for I2C/SPI/RS232 decoding, "digital phosphor" graded intensity display, super fast screen redraws, super deep memory... all for $400. No better value in any entry level DSO right now! Just outstanding stuff from Rigol.
Verified Purchase
Jamieson Olsen on
Jan 07, 2015
Recommend to a Friend
Great Scope
5.0
This is the new default hobby level scope. 4 channels, $400, lots of trigger options, big screen, can be upgraded to have digital signal decoding, lots of trigger options, large memory depth, and many more features.
For the price this scope can't be beat.
Verified Purchase
Michael Gagan on
Jan 06, 2015
Recommend to a Friend
Basic Soldering Iron works well
5.0
This basic soldering iron provides the approx tip temperature. The tip quality is good and the tips are reasonably priced. Buying 4 tips of various sizes for under $25 total is wonderful. For the occasional usage where proper soldering is required, this system for less than $100 is a great choice.
Verified Purchase
Mike Pollack on
Jan 04, 2015
Recommend to a Friend
Excellent Iron
4.0
This is a fantastic piece of kit. I've been using one hakko iron or another for quite awhile. They have always been great performers and this FX888D is no different. The iron heats up amazingly fast and keeps it's temperature pretty well. The iron and associated cable are quite light weight which makes soldering with this a breeze.
I however had to knock a star off my rating because the front panel controls are not at once intuitive. In fact if you jump right in and start mashing buttons you can easily mess up the temperature calibration settings. That would be fine, except that Hakko hasn't included the reset instructions in the manual you receive.
Other than that one niggle, which I only made once, this is a fantastic iron and despite that one flaw this is still one of my favorite irons. Highly recommended.
JMP on
Jan 03, 2015
Recommend to a Friend
Great bang for the buck
5.0
I just can't say enough about this scope. As a hobbyist, it more than meets my needs. I create smart gadgets, and having the 1054Z on the bench saves countless hours testing hardware and code. Thanks Rigol, and TEquipment.net for this fantastic tool.
Verified Purchase
KD Sarchet on
Jan 02, 2015
Recommend to a Friend
Great entry level scope
5.0
A huge step up from Rigol's previous model, the DS1052E. The performance is not significantly changed, but the improved display resolution, much larger memory, and vastly improved software/user interface make this scope much easier to use. The extra two channels come in handy too.
As you'd expect for a scope in this price range, there are a few limitations - some odd behaviors with the probes in 1x mode, some jitter in certain triggering modes, and a menu system that can be tricky to navigate. None of these issues are particularly limiting, and some fixes appear to be in the works (see http://www.eevblog.com/forum/testgear/new-rigol-ds1054z-oscilloscope/ and http://www.eevblog.com/forum/blog/eevblog-683-rigol-ds1000z-ds2000-oscilloscope-jitter-problems/ for more details).
Verified Purchase
Anonymous on
Jan 01, 2015
Recommend to a Friend
Fantastic value for the price
5.0
This oscilloscope packs a huge feature set despite its entry level pricing. Large, high resolution screen is easy on the eyes and user interface is easy to manage. All functions are readily accessible. Search the web for riglol for comments about how to get even more from this unit. Very happy customer.
Verified Purchase
Jamie Heston on
Jan 01, 2015
Recommend to a Friend
Rigol DS1054Z Oscilloscpe
5.0
I belong to old school engineering, read dinosaur, having worked at Hewlett Packard when Bill and Dave were alive back in the 1980's. Think Heart in the pop charts, and Back to the Future (original) movie. I was pleasantly surprise to find this scope comparing well to those. The functions over 30 years have improved a lot for the price, and the build quality, although not an HP heavyweight / over engineered, is functional and I think good and fit for its purpose.
Verified Purchase
Michael Chong on
Jan 01, 2015
Recommend to a Friend
excellent for the money
5.0
This is my first scope. After reading reviews on several forums, this came highly recommended. They were not wrong, this scope does more than I will ever need. I have spent hours learning (playing) with all the features. It is very well laid out and very intuitive. Being a novice, I can easily figure out most things.
For the money, I don't think you can go wrong with this one.
Verified Purchase
Lee Eberle on
Dec 29, 2014
Recommend to a Friend
Excellent bang for the buck
5.0
Just unboxed my DS1054Z, and really stoked about the quality. Build quality appears to be excellent, and useage is fairly intuitive. Happy customer here!
Verified Purchase
Jimbo on
Dec 28, 2014
Recommend to a Friend
great product at great value
4.0
I needed a basic multi channel scope for a home project and this Rigol unit fits the bill. All the features required to analyze four channels of sensor data and optimize the design.
Verified Purchase
Ken C on
Dec 28, 2014
Recommend to a Friend
DS1054Z 50 MHz Digital Oscilloscope
5.0
Everyone will tell you that this is the best oscilloscope for the price. What you are paying for are the specifications. The user interface is lackluster, but with a little practice, this oscilloscope operates fine.
Verified Purchase
Deirdra Rogers on
Dec 27, 2014
Recommend to a Friend
Great scope for the money
5.0
This scope is a great scope for the money. Comes with everything you need if you are hobbiest/student. The only thing I could complain about is there is some trial software built in that you have to pay extra for to use it's features; however, you can use it without those features.
Verified Purchase
Anonymous on
Dec 27, 2014
Recommend to a Friend
Review of the Rigol DS1054Z
5.0
I have now had a couple of days and have been using it. First off this scope is great value. For the price nothing can beat it. If you need a basic up to 4 channel oscilloscope, I am not sure you can do better this. That said if you expecting to use some of the more advanced features like math functions and serial decoding there are some limitation to know about. First the serial and math functions only work on the information that is on the screen. This is kind of a big limitation. The amount of serial data that can really be decoded is very small. For math functions like the FFT this is very limiting on the spectral resolution that you have.
I have one major problem with my scope. There seems to be some leakage of the switch mode power supply of the instrument. It has a couple of spectral peaks in the range of 500KHz to 2-3MHz. The amplitude is about 20 to 200 mV at the 1x setting.
Pros:
Great value, nothing can beet it.
Simple and fairly easy to use.
Great interface methods like USB and Ethernet.
Auto set function is fast
Statics are very good
Cons:
Serial and math functions only use the data on the screen. This is kind of a limitation for what I had in mind when buying this scope.
Sample rate drops down when using multiple channels.
Not hardware upgradable for function generator or logic analyzer.
Still has the AC trigger coupling jitter problem.
Seems to have some switch mode power supply leakage to the analog front-end.
Verified Purchase
Anonymous on
Dec 26, 2014
Recommend to a Friend
Best oscilloscope for the money
5.0
Very nice user interface, quick response to commands, reliability and a good massive construction for this tool. A great value for money choice for everyday use in simple works. I think is the king of the competitors in this class. Keep the great job RIGOL.
Spasev on
Dec 26, 2014
Recommend to a Friend
Excellent scope
5.0
I have a degree in electric engineering, but it's not what I do for living. I was looking for a scope for my hobby of building audiophile quality gear. I was considering: 1) old-fashion CRT-based Tektronix scope, 2) USB-based scope, 3) Rigol DS1052E. I think that many hobbyists make similar decision and I hope my review will be helpful.
I was initially leaning towards option 1 due to better price, easy of operation and a great deal of experience I have with a 'regular' scope. However, after some lurking on eevblog.com and watching videos on digital scopes I realized that with a regular scope I will miss a whole bunch of functionality (self-calibration, measurements, FFT, etc). Digital scopes are packed with functionality, that will be fun to play with even if I will never need most of that functionality! :-)
I quickly decided against option 2 as a USB scope will need a laptop and the overall solution will be very bulky and clumsy. Price-wise, reasonable quality USB scope is on par with the DS1054Z.
Option 3 was an easy decision. For extra $80 you get 4 channels instead of 2, 12-bit resolution, a much better screen, and other perks.
Using DS1054Z for a week, I am glad to report that I am extremely happy with my decision. It's a very solid scope. The user interface is very intuitive and it took me only a few hours to understand how to use its advanced functionality. I cannot recommend this scope enough. If you are making a similar decision, I suggest to watch a couple of videos on youtube and visit eevblog.com.
seavan on
Dec 26, 2014
Recommend to a Friend
Excellent Oscilloscope!
5.0
I' m upgrading from a vintage, analog, 1 Mhz sampling rate oscilloscope. Yeah, from 1 MHz to 50 and all digital! Probably more than a hobbyist needs but will work on my desk for many years.
Verified Purchase
Greg Whitmore on
Dec 26, 2014
Recommend to a Friend
Amazing oscilloscope for the price
5.0
I've worked in electronics technology for many years - and the progression of improvements in the fundamental instruments of the business continue to amaze me. I purchased this for my home shop - to add to my capabilities. While I still have an older analog 'scope, this new digital unit has so many "bells and whistles" you need some time to sort out the many options and adjustments. For the most part, the same logical system is used in other Rigol oscilloscopes I've encountered. The digital signal analysis modes for communication protocols are very nice tools, but they time out after a trial period. I'll probably get those later when the budget permits. The unit is light and compact. It comes with 4 probes as well. A cordless option would be nice, but not absolutely essential for my uses. So far I'm very pleased with the value and performance.
Verified Purchase
Eric Albert on
Dec 26, 2014
Recommend to a Friend
DS1054Z
5.0
Starting from the outside. Very well packed and with documentation. 4 probes, nice. Solid feeling piece of equipment, not light and flimsy. Turned on and was pleasantly surprised to find all of the optional software was loaded for a 36 hr ('scope time) period. After using for a bit I have no complaints. Going from an analog (Tek 2465B) to the digital world it has a lot of features I have to learn about to be able to use all of it's abilities. Mainly I deal with RF and it works fine. Surprising enough a 400 MHz sine wave is viewable, with reduced level(2 div) but enough to tell there is a signal there.
Very pleased overall, excellent value for the money.
Verified Purchase
Clif Holland on
Dec 20, 2014
Recommend to a Friend
Greate Scope at a Great Price
5.0
Purchased this scope to replace an older Rigol and I am not disappointed. I really love the fact that this scope has built in decoding for most of the serial protocols like I2C, SPI, RS232, and more. This saves me having to break out other equipment when testing communications. Everything about this scope is on par with other Rigol scopes. The only thing that I didn't like (and it's the only) is the fact that they use the larger screen to display the menus permanently. I would of like to have seen the extra space used for waveform display, but oh well.
Sophtware on
Dec 18, 2014
Recommend to a Friend
Great Soldering Station
5.0
Absolutely love this thing. Heat's up quick, easy to use and is made very well. I was very surprised and happy with just the weight of the unit itself along with the rigid metal iron holder. Would definitely recommend this to a friend.
Jason Stewart on
Dec 12, 2014
Recommend to a Friend
Great Soldering Station
5.0
The item arrived within three days and was packaged very well. This is more of a testament to Tequipment than Hakko, but is still important as they are who you deal with.
I now have the "clown station", as my kids call it on my bench and set up for soldering wiring harnesses and some circuit boards.
Small footprint, quality burn-proof cord, balanced iron, and rapid heat up make it great for most of what your typical home or small business tech could want. It heats up amazingly fast and keeps a fairly constant temperature. I use the 2.4mm chisel tip set at 600deg F with 63/37 solder and it recovers just fine.
Download the longer instructions and look at YouTube videos on some of the features as the included manual is not real intuitive.
The tips are high quality, but I cannot comment on the longevity of the tips or iron as I have only had it for a couple of weeks.
My experience is with a Radio Shack unit and a Weller unit. The RS was ok but like using a butter knife when a scalpel should have been used. The Weller was great but gave it up after 12 years
I would recommend this unit. If you use it day in and day out, other features on higher end units might be required. However, for most of us, this is a great fit.
Dave
Verified Purchase
David Drewyor on
Dec 11, 2014
Recommend to a Friend
Fantastic power supply
5.0
This is a great power supply. The user interface is easy to use and it is packed with useful features. Current limiting works very well and is suitable for battery charging (constant current transitioning to constant voltage) and halogen lamp drive testing.
Verified Purchase
mhilden on
Dec 11, 2014
Recommend to a Friend
Hakko FX888D-23BY
4.0
Solder irons work great. Could use a place/holder to store extra solder tips.
Verified Purchase
Anonymous on
Dec 11, 2014
Recommend to a Friend
Excellent all around
5.0
As others have pointed out, this soldering station looks like a kids toy. The build quality is excellent and it works great. Heats up fast. With a wider tip this iron can put a lot of heat into a component, even a component with a good connection to a power plane. I used a Weller WTCPT for many years, and this is a much higher quality station. The base/holder appears to be solid metal with a ceramic or powercoat finish. Very nice heavy feel to it.
It comes with a 1/16" tip which is good for soldering wires and some large component pins. I'd recommend spending another few dollars and get a very fine point tip for soldering fine pitch stuff. And get another wide tip for dealing with those power planes.
The 888D is as good as the high end Metcal units I use at work. Very impressed with station at this price point.
Verified Purchase
Jamieson on
Dec 08, 2014
Recommend to a Friend
Incredible Value
5.0
I've had this scope for a few weeks now and it has proven to be an incredible value for the price!
Very happy to see all the features I'm used to using on much more expensive Agilent models.
Verified Purchase
Zachary Cross on
Dec 01, 2014
Recommend to a Friend
Happy so far
5.0
So far this has been a great buy. I've been able to easily see the timing for an electronic circuit I'm building that needs to track A/C zero crossing. With four channels I can monitor the output of a H1AA, my data signal and the output signal and line up the output exactly with the wave.
There is some jitter on the screen so it's difficult to get precise measurements but that could easily be coming from the circuit.
Of course I've only used it for 2 weeks so I can't comment on the long term reliability but so far I'm extremely satisfied.
mark on
Nov 27, 2014
Recommend to a Friend
Great scope!
5.0
Great scope! 4 channels at this price?...yes please.
Verified Purchase
KR on
Nov 26, 2014
Recommend to a Friend
DS1054Z/Digital-Oscilloscopes
5.0
I just purchased this Rigol DS1054Z Digital-Oscilloscope and so far, just love it. I have used a Hantek DSO5202B that was a little bit more expensive than the Rigol but the difference in quality is unbelievable. The Rigol is solid, well built and excellent quality and also nicer to use than the Hantek. For someone who needs a powerful scope but has a limited budget, check out this Rigol scope. Look at EEVBLOG too to see all the happy users!!!
Verified Purchase
dr_when on
Nov 25, 2014
Recommend to a Friend
So far, so good!
5.0
I recently purchased my Rigol oscilloscope and I have to say that the unit is very impressive so far. I like the fact that it has 4 channels and all of the bells and whistles that one could need. Even though I am an amateur technician I think that Rigol is giving me a high quality full featured precision instrument for an awesome price. I will post a new review as soon as I have played with my new toy.
Verified Purchase
Pedro Castillo on
Nov 23, 2014
Recommend to a Friend
Fantastic scope
5.0
I was looking for a scope to get myself after my good ole Tektronix scope was starting to limit my hardware debugging skills. I needed a scope that had a nice large screen, 2 or more channels, and a good amount of memory to store long intervals of waveform data.
After scouring eevblog forums and asking there for suggestions, I bought this guy. Came very quickly, well packaged, and tequipment was really quick to reply to all my questions.
The scope itself is fantastic and does everything I need. 4 channels are extremely useful, the included probes seem rather descent, it is pretty well build and feels very solid. My one gripe is that the rubber feet for it are nowhere near slip-prevention enough. It still slides if you give it a good push, so when you are pressing those knobs to input your selection, which require a good bit of push, then the scope slides.
Other than that, fantastic product. I am probably going to buy myself a Rigol power supply soon too based on how well build this Rigol product is.
Verified Purchase
Elwira Ziemianowicz on
Nov 23, 2014
Recommend to a Friend
Best for the price
5.0
I have been looking for a power supply for awhile. The Rigol had the most options at the best price point. The user interface takes a little bit to get used too. The fan is a little loud. But the power supply output is very accurate and stable. I don't think I could justify spending more for the "A" version.
Verified Purchase
SEAN SEELY on
Nov 22, 2014
Recommend to a Friend
Amazing Upgrade to DS1052E
5.0
As a long time owner of the older DS1052E I was very excited when this new model was announced. It's essentially an upgrade in all areas effectively making the previous model obsolete.
My experience over the last few days shows that every advertised feature seems to work perfectly. The probes are good enough quality and everything about the unit itself is fantastic quality for the money.
Screen is very big, detailed, and clear. (Huge plus for me)
4 channels! Yes!
Protocol deciding works quite well.
Accuracy appears very much within spec.
Rigol is absolutely killing it in terms of value right now. This is my third Rigol product and potentially my favorite.
Verified Purchase
Craig on
Nov 22, 2014
Recommend to a Friend
Best scope for the money
5.0
This scope is an amazing deal. It has features that $4,000 scopes lack. It's fast, accurate, and easy to use. Highly recommended.
Verified Purchase
RT on
Nov 18, 2014
Recommend to a Friend
excellent scope astounding value for money
4.0
I got this scope to replace a 6-year-old BK2534. The difference is striking. The BK2534 is not a bad digital scope, but for the most part it is a digitalized analog storage scope, coupled to a nice digital multimeter. In the DS1054Z, Rigol has provided any number of features that simply couldn't have been implemented a few years ago. Some of them (some of the triggering modes, for example) are of uncertain (to me) utility, and they may have been provided only because they were so easy to implement. There's nothing wrong with that; maybe someday I'll realize that one of them is exactly what I need.
During several hours of exploring the scope, I experienced one freeze, requiring reboot. Similar experiences have been reported in some on-line forums. I can't reproduce the freeze, and I suppose that a firmware update will appear within the next few months.
Comparing it to the BK2534, the only criticisms I'd make of the DS1054Z are (1) the bigger case of the BK2534 let it be quieter, and allowed its manual and probes to be stored neatly inside it; (2) the handle of the BK 2534 could be swung around to hold it in various stable attitudes; in contrast, the DS1054Z can be only flat or tilted 15 degrees up, and the little legs allowing the tilt tend to fold up if the scope is jostled; and (3) the BK 2534 had a real-time calendar clock, so files and screen captures were automatically timestamped. These are niggles; the DS1054Z is an excellent instrument.
Robert R. Fenichel on
Nov 16, 2014
Recommend to a Friend
Nice and got here fast
5.0
Super fast shipping. This is a great station. I had a Radio Shack digital station and there is no comparison. This is so much better. Looking forward to many years of service.
Verified Purchase
Chad Johnston on
Nov 16, 2014
Recommend to a Friend
Excellent Item!
4.0
Wow! this Oscilloscope is more than what I thought I would get. Awesome colors, the 4 channels you cant getting any better than that for that price. Excellent item, I would recommend this to anyone who is looking for a scope to start out a Home lab with.
Thanks!
Verified Purchase
Emiljano Shapte on
Nov 12, 2014
Recommend to a Friend
Solid Power Supply
5.0
Overview: Simply put, this power supply is a brick. The construction is stout and the exterior has an amazing attention to detail. Performance is spot on.
Pros:
-Two isolated supplies
-Intuitive configuration, I didn't have to consult the manual to get it working how I wanted
-Rigol packaging is first class, I have no doubt that the unit is well protected while shipping. Double outer box and custom formed foam supports on either end of the unit.
Cons:
-Since it doesn't have feet and the screen has somewhat poor side viewing capability, it can be hard to read the LCD when it is sitting on my bench and I am standing above it looking down at an angle of 45 degrees. I remedied this by placing a small piece of wood under the front to angle the front slightly.
-Does not come with any stock banana clips
-The power connector on the back comes out the left side when facing the front of the unit. This is opposite to my Rigol oscilloscope. I wish they could make up their mind.
Verified Purchase
Charles Rogers on
Nov 08, 2014
Recommend to a Friend
Excellent Value
5.0
Having used nice power supplies in the labs of others before but only hacking together cheap junk for my own lab, I decided to try the DP832 for myself. Rigol has been impressing everyone for the last few years now with an amazing amount of professional quality for a hobbyist price.
This supply is no exception. It's responsive, the screen is clear, control is easy, and the voltages are more than plenty accurate. The USB data is fantastic for logging/monitoring purposes for app developers. I've found that it's quite easy even for novice coders to write custom data logging software for this scope.
I can't recommend the supply enough for anyone from hobbyists to professionals on a budget. After examining Rigol's entire line I felt this was the best value. I'm even more confident in this after using it for a few weeks.
Verified Purchase
Craig on
Nov 07, 2014
Recommend to a Friend
DS1054Z
5.0
This is my first Digital Oscilloscope and I must say it performs to my expectations. It was out of stock when I ordered it but I got it a week before the expected date thanks to the prompt shipping by TEquipment. Yes I would recommend this to anyone looking for an entry level scope.
Verified Purchase
DonaldM on
Oct 24, 2014
Recommend to a Friend
Good service
4.0
I ordered a Rigol 4 channel oscilloscope. The equipment got shipped promptly and delivered on time. I would recommend to anyone.
Verified Purchase
minh tran on
Oct 19, 2014
Recommend to a Friend
Excellent scope
5.0
I snapped this up out of the first batch to hit the store because of the features per buck. I expected a featherweight plastic piece similar to other scopes of this type that I have used, but was very impressed as it came out of the box. Very much more impressed after using it for a couple of weeks. A superb scope at a budget price. My only gripe is that the little plastic insulator caps on the probe tips fall off easily - a minor gripe, and the only one.
Verified Purchase
Rod Ralston on
Oct 18, 2014
Recommend to a Friend
Oscilloscope 1054Z
3.0
I have not had a chance to give this gift to my Husband yet he has been out of town but as far as the ordering process it was very friendly and easy. I had to email a few times about tracker information and was always responded to on a timely manner and they answered my questions. I would recommend this company to others and once my Husband starts to use his scope I am sure that he will love it.
Verified Purchase
Laurie Tullo on
Oct 07, 2014
Recommend to a Friend
Great quality power supply for the price
5.0
My cheap electronics superstore power supply blew up in the middle of a project. Ordered this from TE based on the reviews and my good experience with other Rigol gear we have in the lab. Was very easy to setup and use and was able to complete my project the same day. It is now my daily bench power supply and has worked perfectly. The display is easy to read, the color choice is a nice touch. I like that I can software upgrade it if I need those features later on. The rotary dial style buttons are a little odd, I would have preferred a regular keypad, but it's a a minor issue and I've got used to them. I couldn't find another power supply with the same quality and features anywhere near this price. Very happy.
mission on
Oct 07, 2014
Recommend to a Friend
Great bang for the buck
5.0
I bought this scope as soon as I heard about it - I have two older Rigol scopes that I like just fine, but they were getting a bit dated - I was particularly interested in the higher-res (and color) screen.
I have only used it for a few hours so far, but it has worked perfectly. The feature set is great for the price. If only it had a touch screen...
I would highly recommend the Rigol brand in general for their great value.
I will probably be buying the option for I2C and SPI which are pretty reasonable at < $200.
Verified Purchase
Joel W on
Oct 02, 2014
Recommend to a Friend
Huge for the price
5.0
The DS1054Z is a *fantastic* scope for the price, there is nothing on the market right now that gives so much for so little. Pluses include 4 channels, comes with 4 probes, bandwidth is better than advertised, long memory, better than the 30K waveform update rate advertised, 7" 800x480 widescreen display, and usb/lan standard. Read over at the eevblog on how to tweak it.
Verified Purchase
Alan Kamrowski II on
Oct 01, 2014
Recommend to a Friend
Great bang for the buck
5.0
I took a flyer on this scope since it literally came out of the first batch of scopes that TEquipment got. I have previously used two older Rigol scopes and was very happy with them, so I thought I'd try their latest model.
I have only used it a few hours so far, but it has been really fine. The features are really quite nice for something this inexpensive. In particular, the full-color, fairly hi-res display is quite nice. (If it were only touchscreen...!)
Will probably buy the SA-DS1000Z for I2C and SPI triggering and decoding.
Verified Purchase
Joel Weber on
Oct 01, 2014
Recommend to a Friend
Great soldering station
5.0
This is a great product from Hakko. I use this for building musical equipment with through hole components, and it is perfect. It heats up fast, came with a nice base for the iron, and has a pretty wide variety of different tips available.
Verified Purchase
Patrick on
Oct 01, 2014
Recommend to a Friend
Rigol PD 832
5.0
I JUST CHECKED ON THE DP832 POWER supply that i just purchased from TE and found that the one I got has the newer modified Hardware with the bigger heatsink.
you can check it by looking on the RHS holes, if you see silver color heat sink, then you got the new one.
the old heat sink was black and very small that caused the regulator to get hot and caused the PS to reset intermittently.
I wanted to upgrade to the bigger version with "A" at the end of the model name, i think it means accurate, but it costs double.
may be purchacing the Hi-Res option for $102 is a cheaper logical option.
so I'm so happy with my DP832 Power supply and it does serve its purpose very good.
and may be I'll add the DP1116A later in near future.
Verified Purchase
Ahmed on
Sep 22, 2014
Recommend to a Friend
WOW
5.0
WOW, is it. A very nice power supply that has survived my daily abuse and still keeps tracking along.
You cannot get a better power supply for the money.
Verified Purchase
Joel on
Sep 12, 2014
Recommend to a Friend
Solid value in a triple supply!
5.0
So far the performance and features of this supply have exceeded the price point. The output has been clean an stable so far with good options and adjustability. Build quality seems up to par as well. Would buy again!
Verified Purchase
Ethan Hall on
Sep 11, 2014
Recommend to a Friend
DP832
4.0
I have just received this power supply and found that I had to order the power leads for it. I haven't had the opportunity to use it. The power supply is well made and well packaged with great documentation. The full manual is on CD. This unit is big and has some weight to it so it should hold up. I would give it 5 stars if it had the leads for it and it worked (haven't used it yet) as I think it will.
Verified Purchase
Mark Roberts on
Sep 08, 2014
Recommend to a Friend
excellent all over
5.0
I really was impressed by the quality of the make, and my god, this thing is heavy...i mean real heavy.
the front panel controls are great, and the display is awesome.
10mv tolerance for this cheaper unit is ok for what i think i'm going to use it for.
the more expensive one DP832A costs nearly double and gives tolerance 1mv, and have color coded buttons.
and Tequipment really great service and fast delivery
i'm very pleased with every thing.
I also purchased Rigol scope and function generator from them.
thanx 4 reading my review.
Verified Purchase
Ahmed Gaafar on
Aug 21, 2014
Recommend to a Friend
Perfect solution to bench supply
5.0
This is a great power supply... very precise and robust. You can have upgrade to 3 digits resolution, There are a lot of functions and the 3channels are amazing ! Also it has almos no noise at all ! My osciloscope almost does not see any level of noise..
Verified Purchase
Tiago Baracho on
Aug 17, 2014
Recommend to a Friend
Soldering station
5.0
Bought this as a gift for my husband. He loved it. It was even better then he had expected. Being able to change the heat setting was very helpful.
Verified Purchase
Shelli Jackson on
Aug 07, 2014
Recommend to a Friend
I am more than satisfied with my choice
5.0
The Rigol 832A full meets my expectations and needs. For the price, the quality and functionality are exceptional.
Verified Purchase
Art Goldstein on
Aug 05, 2014
Recommend to a Friend
Hakko FX888D
5.0
Works great which was no surprise as this station is highly recommended by most.
Verified Purchase
Ryan Cole on
Aug 01, 2014
Recommend to a Friend
Excellent for high-vol hobbyists or low-vol pros.
5.0
Beware of Chinese knock-offs sold on auction sites. Part of what makes the authentic Hakko parts great is the quality of each component. It's built to last. Though this looks like it could be a fisher price "my first soldering station", the build is actually very impressive! The stand that looks plastic is actually metal with ceramic paint. Quite durable and heavy enough that it will not get knocked over. Overall, the 888D is an extremely reliable system that increases productivity.
Verified Purchase
Christopher Whitmore on
Jul 22, 2014
Recommend to a Friend
Hakko Solder station
5.0
It is a wonderful solder station so far. It holds the temperature well even when trying to solder large heat sinks.
The service was, once again, very good and I have enjoyed doing business with them.
Thanks!
Verified Purchase
Jerry Sweeney on
Jul 18, 2014
Recommend to a Friend
Hakko FX888D-23BY Digital Soldering Station
5.0
I started out by doing intensive research. I looked at stations that would meet my present and future needs; however the price of the stations were way beyond my budget. So after careful consideration, I choose the Hakko FX88D-23BY, it has met all my expectations. Rapid heating to my selected heat ranger, plenty wattage for the work I do (repairing vintage tube amps and guitars). Very sturdy base, love the presets for quick changing of heat range. I had it now for about a year and no regrets!
LastNote on
Jun 23, 2014
Recommend to a Friend
Solid built with range of options and reliability
5.0
I've got a DP832 only for a few days to replace my old power supply. Not having heard about Rigol before, I was pretty skeptical about what to expect.
After a few days of usage, I've grown to like its easy to understand user interface and range of options/features I didn't know I need until now.
Also, the output is accurate and stable at what I specified.
Verified Purchase
Anonymous on
Jun 13, 2014
Recommend to a Friend
Great iron
5.0
Easy to use iron with great temperature control. Heats very quickly. Comes with fitted sponge and cool tip cleaning brush for the base. I would definitely recommend this to someone that is looking to make a cost effective purchase for their tool bench.
Verified Purchase
MikeD on
May 05, 2014
Recommend to a Friend
Great unit
5.0
Aside from YouTubing and Googling, I decided to try the unit for myself. Great price and solid performer. Only issue I had was the small instruction manual that came included was small and seemed lacking in instruction. Just went online to Hakko and downloaded the pdf manual for it and was able to read it clearly on my iPad and also, seemed a bit more instruction in the pdf version. Great customer service and pricing from these folks at TE!!!!!!!!!!
Verified Purchase
Mr. C on
Apr 24, 2014
Recommend to a Friend
Great PSU
4.0
I would buy it again.
Screen can be changed from amber,green,or white font.
I like the knob for adjusting, but the number pad around is just stupid. I'm knocking one star off because of that.
Verified Purchase
Anonymous on
Apr 23, 2014
Recommend to a Friend
Review for FX888D Digital Soldering Station
5.0
Excellent product with probably the best benefit/cost characteristics in the mid-range products. FX888D has many variants of soldering tips to use all different types of soldering.
Verified Purchase
Anonymous on
Apr 03, 2014
Recommend to a Friend
One stop station for all your needs
5.0
Went with this model instead of the Weller WESD51 and haven't looked back. This station gave me more wattage which relates to be a better temperature range. It is super easy to use and maintenance is minimal and easy when necessary. I look forward to using this station for many years to come.
CT TDI on
Mar 28, 2014
Recommend to a Friend
Easy to use general supply
4.0
In general I'm very happy with the operation of this supply. All features I've tested work as expected. Rating marked down due to cons.
Pros:
* I've found the somewhat odd but flexible value input control very useful for fine and coarse control.
* High accuracy option usually eliminates need to add external voltage and current meters; displayed values were within specs.
* Channel controls are easy to use. Ability to turn channels off and on is very useful.
* Over-voltage and over-current controls work well, and can prevent damaging circuits.
* Remembers last values entered between power cycling.
Cons:
* Entering feature option codes is unpleasant, difficult and slow. In some cases they won't work if microcode isn't correct but it isn't obvious that's the cause.
* Not all outputs are independent; grounds are shared between 2nd 30v and 5v.
* Takes several seconds from time power switch is turned on to when the supply is ready to use.
JIM MOOMAW on
Mar 19, 2014
Recommend to a Friend
Wow Wow Wow
5.0
How does this unit heat up so fast? Amazing! I have been using an old Weller station for many years: I replaced the thermal switch in my iron a couple years ago, but it started acting up recently. I was in a bit of a rush this time, so rather than attempt another repair I decided to try a new station. The Hakko FX888D was within my budget and had decent reviews except from those who had difficulty with temp setting, etc. While the blue/yellow coloring is not my favorite, I am very impressed with the iron/station operation. I ordered it with several different tips although I have not tried them all yet. While I somewhat miss the "click-click" of my old weller operating, I sure enjoy the performance of this station.
Verified Purchase
Gerry L on
Mar 04, 2014
Recommend to a Friend
Great product
5.0
Great product
Jj on
Feb 21, 2014
Recommend to a Friend
Excellent power supply at an excellent price
5.0
Very solid and well built power supply. Intuitive interface, low output noise, and fast boot times. My unit was recalled, but Rigol was very helpful in getting the modifications performed. Highly recommended, especially since new units have the improvement anyway.
Verified Purchase
Berkeley Fisher on
Feb 13, 2014
Recommend to a Friend
hakko soldering gun
5.0
I bought one of the older model of same, it is an amazing devise that i do all my electric hobby work as i fly electric model jets (electric turbine fan) as i needed a very reliable soldering iron for my electric jets equipment ESC ,motors and lipos battery etc .Though i had to pay a lot to be shipped to Canada but well worth it .Thanks
Ross from Oshawa Ontario
Ross on
Feb 04, 2014
Recommend to a Friend
Great PSU
4.0
This is a nice power supply for the price. Good resolution and programmable. The over current/voltage protection comes in handy.
I'd give it a 5 if it had knobs for each channel instead of having to hit the button then turn the knob to adjust.
Verified Purchase
Anonymous on
Feb 03, 2014
Recommend to a Friend
The Best Midrange Soldering Station
5.0
A thoughtfully-designed and powerful unit. Iron heats to 371 C in about 30 seconds and slots solidly into the base. Cord is made of supple, heatproof silicone and is about 4' long, which can get a little unmanageable on the workstation. Tips are high-quality and easily available. The two-button interface is a little tough to get used to, but you'll rarely need to use it once it's configured.
Verified Purchase
Zachary Freedman on
Feb 03, 2014
Recommend to a Friend
Best Product
5.0
Performed very well!!
Anonymous on
Feb 03, 2014
Recommend to a Friend
Quality soldering iron
4.0
This is a quality soldering iron with a very solid construction and a nice exterior design (even if it looks a bit like a toy). It heats up very quickly. I personally would have enjoyed the old model, which featured a knob to regulate the temperature (this is why I give it 4/5 stars). Nevertheless, the two button system isn't too cumbersome, and the temperature display is nice and bright. The iron stand is sturdy. Having both a sponge and the steel wool is quite convenient. For the price, I'm very pleased with it overall.
NV on
Jan 28, 2014
Recommend to a Friend
DP832
5.0
I would highly recommend the Rigol DP832 Power Supply. When I ordered my DP832 in September 2013, TEquipment.net held off shipping the unit until a Rigol thermal design issue with initial production units was solved and implemented. My unit works extremely well and I am very well satisfied with it.
Verified Purchase
Anonymous on
Jan 28, 2014
Recommend to a Friend
Soldering Station
5.0
Best I ever owned!
Verified Purchase
Marvin Meit on
Jan 28, 2014
Recommend to a Friend
Excellent
4.0
Excellent product. Heats up fast and last forever!
CHRISTI MCFADDEN on
Jan 28, 2014
Recommend to a Friend
super good
5.0
Super awesome. Heats up fast stays hot and is super comfortable to use
stormmageddon on
Jan 17, 2014
Recommend to a Friend
Good
5.0
Great value power supply. I agree with the previous reviewer that the numbers in the circle is terrible.
I had heard there was some overheating on a earlier (2013) and it sounds like they have that resolved and tequipment has the newest hardware.
BRYCE JOHNSON on
Jan 16, 2014
Recommend to a Friend
Excellent Bench PSU
5.0
Excellent bench power supply for the money. High precision, intuitive controls, and easy to read display. The only issue I have with it is the inexplicable arrangement of the number keys in a circle. A normal, rectangular configuration would have taken about the same amount of space, and been infinitely easier to use.
Verified Purchase
Daniel Wilhelm on
Jan 05, 2014
No reviews found to display for this rating.