More Ways to Save
Save time and money in more ways than ever with LanTEK II.

Universal Link Testing
The patented testing process eliminates the need for costly permanent link adapters. By using universal test adapters for Category 5E through 6A certification, patch cords are typically the only item that needs to be replaced when worn or damaged. This eliminates the wait and expense of proprietary adapters meaning more time is spent testing and less time searching for replacement parts.

Channel and Permanent Link Testing with One Adapter
Only LanTEK allows permanent link and channel certification without changing adapters. The patented DualMODE™ function allows cabling to be certified to two different standards with one press of the Autotest button; half the time it would take with any other certifier. Certify cabling to both Category 6 permanent link and Category 6 channel link standards at the same time, satisfying requirements from cabling manufacturers and end users without costing any more time in the field. Or certify cabling to existing current standards and proposed future standards which eliminates retesting at a later date.


Fast Test Times
Category 5E certification in 11 seconds, Category 6 in 14 seconds, and Category 6A in only 16 seconds with graphs! Plus enjoy fiber certification that’s 3x faster and 10 gigabit alien crosstalk certification that’s 4x faster than the competition. 

Most Memory Capacity
LanTEK II has 7x the storage capacity as competitive certifiers. Save an astonishing 1700 Category 6 results with graphs. If the memory fills, simply off-load the data to a USB flash drive for portability and archiving.

Cut the Power Cord
The new smart lithium battery technology provides an amazing 18 hours of use in the field. The revolutionary battery technology has two charging modes that offer the best flexibility available. Slow charge the battery overnight while it is inside the LanTEK II, or remove the battery and plug in to its dedicated charging port for a quick five hour charge. Plus, the battery’s internal fuel gauge automatically self-adjusts every time the pack is completely discharged and recharged, providing accurate charge readings over the life of the battery pack. 

Three Models to Suit Any Need
LanTEK II is offered in three models: 350, 500 and 1000. The LanTEK II-350 offers 350MHz of frequency sweep to certify Category 6 cabling and below. LanTEK II-500 sweeps to 500MHz, and is the only certifier designed specifically for Category 6A cabling. LanTEK II-1000 is the world’s fastest certifier with a full 1GHz of certification bandwidth to go well beyond Category 7/ISO Class F (600MHz), all the way to ISO Class FA (1000MHz) standard to support shared sheath applications such as CATV, Ethernet and voice in the same cable.

Maximum Reporting Power
The new IDEAL DataCENTER (IDC) software puts the power in the fingertips of the user. The main test grid display can be customized to display and sort by virtually any test parameter allowing for quick identification of tests that are below desired performance margins. Quickly scan through plot data by choosing a plot type and scrolling through the test list to instantly refresh the plot for each test. This makes visually scanning through reports and searching for anomalies a breeze. IDC offers many reporting options such as detailed, brief, and single line reports, plus export data in XML, CSV and PDF formats. Plus the unique ability to customized the plots by inverting the scales, toggling linear or log frequencies and even adjusting colors makes IDC the most user friendly and powerful cable reporting software ever.


FiberTEK FDX

Time Saving Fiber Certification
The FiberTEK FDX option allows users to add full Tier 1, standards compliant fiber certification capability to the LanTEK II certifier. Tier 1 certification utilizes a light source and power meter to measure the power loss of optical cabling. FiberTEK FDX modules incorporate dual light sources and a wide range power meter to allow testing loss of fiber links as well as to measure the light emitted from active network equipment for troubleshooting. 

The full-duplex FiberTEK FDX represents the pinnacle of fiber optic certification, saving time and simplifying documentation by completely eliminating the need to swap launch cords or swap modules. The unique full-duplex operation tests a single strand of fiber at two wavelengths and in both directions, plus measures the length with one press of the Autotest button. This means that for each fiber, five test parameters are saved for each cable ID making it the easiest to use fiber certifier ever.

Three types of FiberTEK FDX are available to suit every installation. Multi-mode (850/1300nm) kits are available with either LED light sources for 10/100/1000Mbps certification, or VSCEL/laser sources with high dynamic range for certification of links greater than 2kM in length. Single mode (1310/1550nm) kits feature laser sources as well. Combination multi-mode and single mode kits are available to further increase the FiberTEK FDX value.

Simplified Testing
Unlike other fiber certification add-ons that require up to four separate testing steps to test each fiber at both wavelengths and in both directions, FiberTEK FDX can accomplish this task in one easy step. FiberTEK FDX revolutionizes the whole fiber certification process by utilizing a sophisticated full duplex optical module that lets each fiber be certified in one simple step with no reversing of patch cords or swapping of optical modules. Four attenuation measurements plus length in one press of the Autotest button. The simplest way to certify fiber.