| Accuracy is guaranteed at 23 5 (73 9 ) and 80% RH max for one year, or opening and closing of the clamp sensor 10,000 times, whichever comes first. |
| Rated current | 1.0 AAC (f.s.) |
| Output voltage | 25 mVAC/A |
| Amplitude accuracy | ±3.5% rdg. 12µV (45 to 66 Hz) (Regarding the accuracy: refer to the specification of the each product that you use with this clamp on sensor) |
| Maximum input current | 30 A continuous at 45 to 66 Hz |
| Effect of conductor position | within ±0.4% (in any direction from sensor center)) |
| Effect of external magnetic fields | 400 AAC/m corresponds to 5 mA, max. 7.5 mA |
| Remaining electric current character | 1 mA max. (in 10 A go and return electric wire) |
| Dielectric strength | 2224 VrmsAC for 15 seconds (between electric circuit and case) |
| Maximum rated voltage to earth | Within 150 Vrms (Insulation conductor) |
| Operating temperature and humidity range | 0 to 50 (32 to 122 ), within 80%RH (no condensation) |
| Storage temperature and humidity range | -10 to 60 (14 to 140 ), within 80%RH (no condensation) |
| Location for use | Altitude up to 2000 m (6562 feet), Indoors |
| Standards applying | EMC
EN 61326:1997+A1:1998+A2:2001 +A3:2003
Safety
61326:1997+A1:1998+A2:2001+A3:2003
EN 61010-2-032:2002
Type B current sensor
Measrement Category III, Pollution
Degree 2 (anticipated transient
overvoltage 2500 V) |
| Diameter of measurable conductor | Within 10 mm x 28 mm (0.39" x 1.10") |
| Cable length | Approx. 3 m (118.11") |
| External dimensions | Approx. 65W x 52H x 18D mm (2.56"W x 2.05"H x 0.71"D) (excluding protrusions) |
| Mass | Approx. 100 g (3.5 oz.) |
| Accessories | Instruction manual |