Recommend to a Friend
Excellent Product
5.0
This is an excellent unit. It pays for itself after the first use. Works as intended and saves you a lot of headaches. Comes with extra filters and tool to service the unit. Replacement tips in different sizes can be purchased but the tops seem to last pretty long depending on how you maintain them. U.S. Say the only downfall is it is a bit big/bulky but the usefulness of this unit way outwits any negative. You won't be dissapointed.
Anonymous on
Apr 28, 2015
Recommend to a Friend
Hakko 808-Kit Desoldering tool
5.0
Great Tool! Easy to work with and does the job neat, clean & fast
Paul on
Apr 17, 2015
Recommend to a Friend
Hakka 808
5.0
We had a huge project to complete in recapping a vintage Neve recording console and the 808 worked great and sped up our efficiency quite a bit. It worked great and was very beneficial in the project. Hily recommend it.
Anonymous on
Apr 16, 2015
Recommend to a Friend
Hakko 808-KIT Desoldering Gun Kit
5.0
Quick delivery!
Have been using the unit regularly for several months, and it performs well.
Does everything I've needed so far.
Good suction and easy to handle
Ken on
Apr 16, 2015
Recommend to a Friend
Hakko solder suction device
5.0
great device for electronic work of all kinds
mark on
Apr 15, 2015
Recommend to a Friend
The best desoldering solution, by far
5.0
If you read articles on repairing or refurbishing equipment, where multiple desoldering operations are required, it becomes apparent that the Hakko 808-KIT is the best desoldering solution, by far !
Saves a lot of time, easy on the equipment being worked on.
Verified Purchase
Thomas Parsons on
May 13, 2014
Recommend to a Friend
Excellent for hobbyists.
5.0
I purchased this unit in February. I am in the process of restoring a 1974 Seeburg Jukebox. I had removed some components with a standard solder station and one of those plastic "suckers', but due to the age of the PC boards, some of the lands were still coming off of the board from the heat. This unit works just as well as the bench top commercial units I used as a medical equipment technician. And for the hobbyist the price makes it an affordable alternative to plastic suckers and the desoldering wick. I plan to use it on some much older antique radios which are point-to-point wired, so I purchased a larger tip due to the greater volume of solder.
I have 2 Hakko soldering stations. My first I bought 25 years ago and it's still going strong. When Tequipment introduced their new model last year I decided to get another, as I have one bench for my business and another for hobby pursuits. This desoldering pump is of the same high quality as those Hakko stations and I would highly recommend it to anyone contemplating a purchase.
Verified Purchase
Cliff Shelby on
May 07, 2014
Recommend to a Friend
Excellent for hobbyists.
5.0
I purchased this unit in February. I am in the process of restoring a 1974 Seeburg Jukebox. I had removed some components with a standard solder station and one of those plastic "suckers', but due to the age of the PC boards, some of the lands were still coming off of the board from the heat. This unit works just as well as the bench top commercial units I used as a medical equipment technician. And for the hobbyist the price makes it an affordable alternative to plastic suckers and the desoldering wick. I plan to use it on some much older antique radios which are point-to-point wired, so I purchased a larger tip due to the greater volume of solder.
I have 2 Hakko soldering stations. My first I bought 25 years ago and it's still going strong. When Tequipment introduced their new model last year I decided to get another, as I have one bench for my business and another for hobby pursuits. This desoldering pump is of the same high quality as those Hakko stations and I would highly recommend it to anyone contemplating a purchase.
Verified Purchase
Cliff Shelby on
May 07, 2014
Recommend to a Friend
Hakko Desolodering Iron
5.0
Great iron for desoldering. Heats to a good temperature and has available tips for most applications. Easy to clean and comes with replacement filters as well as cleaning tools.
MikeD on
May 01, 2014
Recommend to a Friend
Hakko 808 desoldering gun
5.0
Best soldering gun I ever used I repaired 8 monitors with it very fast power full suction. tip stay's clean no clogging. very fast shipping.
Verified Purchase
Jack Schiffer on
Apr 01, 2014
Recommend to a Friend
Love this desoldering tool!
5.0
I use this for working on vintage synthesizers snd video games. I researched desoldering tools carefully and selected this gun.
The unit works very well and only needs cleaning about every 50 or so desoldering operations. Cleaning is a very quick painless operation. I've used it for a couple of years and it still has the original filter in it, although it's about to go. Plenty of spare filters come with it.
I did a full recap on an OB-Xa and lots of smaller jobs of probably 10 synths. I think only one size tip comes with it so you need to get the larger tip if you want to do stuff like large transformer wires.
It's well balanced and heats up pretty quickly. Would be nice if the cord was more flexible. It's kind of stiff and takes a set when coiled for a while. The plastic carrying case is of nice construction as well.
A bit on the expensive side at first, but you'll have no regrets if you've been using solder wick.
My one trick that's not in the manual is when you get the joint good and melted, "wiggle" the tip around a bit to move the wire around in the pcb hole for a good, full cleanout.
Verified Purchase
scottrod on
Feb 18, 2014
Recommend to a Friend
Hakko the magnificent
4.0
I have read about the 808, and finally took th plunge..
I bought a few extras tips, stand, extra filters, etc..
Well it is my 'go to' tool on the work bench..
Great for circuit boards, and also antique electronics, test gear, and radios that I do most of my work with.... I had been using my 808 at home and work, and talked my boss into buying me one just for work....
Great device..
I have two recommendations for the next version..
1- a 'power' light to indicate it is 'on ' & hot..too eay to forget to unplug it..
2- a longer , thinner , more flexible cord, silicone would be nice
Adamc on
Feb 14, 2014
Recommend to a Friend
Hako 808 Kit
5.0
I have been looking for an affordable, rugged tool that does what it is supposed to. This kit fills the need and is totally portable. For the typical desolder job on the go, this kit is "da bomb"!
Highly recommended!
Keith on
Feb 13, 2014
Recommend to a Friend
A tool I don't know how I lived without!
5.0
Every once in a while you purchase a new tool that make it's intended work so easy - you don't know how you ever did without it. This is such a tool.
From the first moment of use it's apparent your quality of work just went up. The time you spend on a project just went down. Using this desoldering iron to rebuild an old Heathkit Tube Tester has made the difficult chore of removing components from old style solder lug construction a breeze. Use on a dual sided PC board and removing RS-232 connectors (for example) without lifting a trace - this is what you need.
Jim on
Feb 11, 2014
Recommend to a Friend
Hakko Despldering tool
5.0
I bought this tool in the hopes that it would work for removing IC's and other components from PC boards. I wasn't all that sure that it had enough suction to match the larger and more expensive commercial units.
When the tool arrived I put it to the test. WOW was I amazed at its performance. In a number of cases capacitors would just drop off the board. It took a bit of getting use to before I realized that rotating the tool while desoldering IC's would loosen the pins as well as the solder inside of the plated thru holes.
One tip for others is to use the long probe to keep
the solder from sticking to the inside of the suction
portion. The large reservoir holds quite a bit of removed solder and is very quick and easy to remove and empty.
To say that I am satisfied would be a bit of an injustice. This is a professional grade desoldering tool and a worthwhile investment for any of your desoldering needs.
Verified Purchase
Dan Ellis on
Feb 08, 2014
Recommend to a Friend
Great De-soldering tool
5.0
The unit works as well or better than any de-soldering tool I have ever used. Much better than a manual solder sucker or solder wick. The case and cleaning tools are a bonus.
Verified Purchase
Anonymous on
Feb 05, 2014
Recommend to a Friend
reliable and heavy duty!
5.0
I have 8 years using hakko products and all of them are very reliables snd heavy duty use.
I recomend it
HERMES FLORES on
Jan 29, 2014
Recommend to a Friend
Nice Unit
4.0
I was a bit apprehensive when I ordered the Hakko 808. Having "butchered" several double sided PC boards, while changing out caps and other stubborn components, I decided it was time to get serious. The 808 zipped through several other boards I was working on without any mishaps. It did a very nice, clean job of removing components. So far, I have had very good luck with this unit, and I would recommend it to save yourself tons of grief. The only complaint I have is I think the tips are a bit pricey and thus, I gave it 4 stars instead of 5. Other than that, a very nice unit for my work.
Mike on
Jan 29, 2014
No reviews found to display for this rating.