Recommend to a Friend
Very effective soldering iron
5.0
This is my 3rd Hakko soldering iron and I love them. I have one analog version of this and this is now my 2nd FX888D. My first one lasted me years and still works well even after Hours of soldering and being dropped numerous times. I just had to order a new power switch to replace the original as it was starting to stick. But overall this iron is a nice setup for both bench and in my case a travel set. Heat recovery is pretty quick.
Verified Purchase
Very effective soldering iron on
Jun 24, 2020
Recommend to a Friend
Great soldering station, came with wire cutters
5.0
The quality one might expect from Hakko is seen in this soldering station. I wasn't disappointed. Everything is solid and heavy. The base and stand both stay in one place on your bench, and between the unit's rubber feet and the decent construction/weight, it stays where you put it. It's well worth the money! Don't keep buying cheap soldering irons; get yourself a good decent soldering iron like this Hakko.
Verified Purchase
Matthew on
Nov 09, 2019
Recommend to a Friend
Very sharp
5.0
I got a pair of these from amazon and it was a knockoff, which seems to be the direction it's heading over there in general. Glad to have the real deal from a company i trust. Very sharp and works for my needs. I have a few brands from venders other than amazon and while they are good, i've been reaching for this pair the most. Thank you TEquipment!
Verified Purchase
Richard Morris on
Feb 21, 2023
Recommend to a Friend
HAKKO FX888D
5.0
The form factor is proper for a crowded workbench. I have not tried the iron yet but I believe that it will live up to its reputation
Verified Purchase
Bruce Zibung on
Oct 27, 2022
Recommend to a Friend
Great clippers
5.0
I've used these a few times. They're very sharp and cut wire and solder with ease. Highly recommended! I'll update this review if I have any issues later with long term durability or quality.
Kyle T on
Aug 28, 2022
Recommend to a Friend
It is a good investment
5.0
I have only had the Hakko FX-888D soldering station for a few weeks but I concur with the other reviews: the unit heats up very quickly, the temperature recovery time is short, it appears to be well built, the iron is nice and light and comfortable and is easy to maneuver, and my soldering experience has been great so far. I definitely should have purchased this soldering station a lot sooner. One thing about the preset temperatures, before you can access them you need to change the temperature setting mode selection to preset mode (1) and verify that the number of presets is set to 5P in the parameter settings (see the Setting mode selection section of the manual).
Anonymous on
Jul 19, 2022
Recommend to a Friend
Awesome
5.0
Been using and reccommending Hakko soldering stations for years. The FX888D is compact, rugged, reliable and works great.
Paul T. on
May 30, 2022
Recommend to a Friend
Great tool
5.0
Easy to use, has everything you need except solder. Tips are great too. Small footprint on work bench, stable, does everything you need it to. With my arrangement, the wires are not in the way and it has made my workflow a lot easier.
on
May 03, 2022
Recommend to a Friend
Great purchase
5.0
It is so much fun to have a professional soldering iron system. VERY highly recommended. Just dial in the temperature, use the convenient holder with cleaning add ons, use whatever tips you want--and you are good to go.
Anonymous on
Nov 20, 2021
Recommend to a Friend
great product
5.0
Cuts great, very sharp, comfortable in the hand. Great product for a great price.
stephen hill on
Nov 18, 2021
Recommend to a Friend
Great Cutters
5.0
Great small cutters , great price, I have 2 or 3 of these so I always have a pair handy at home and work.
Verified Purchase
Tim on
Nov 06, 2021
Recommend to a Friend
Another great Hakko product
5.0
I bought this to give my old Hakko 936 a break, I have used it hard for quite a while and decided it was time to go with the smaller , digital version and this didnt let me down.
Got a great price and free shipping could not be happier with my purchase.
Verified Purchase
Tim on
Nov 06, 2021
Recommend to a Friend
hakko fx 888d-23y
5.0
purchased iron and 4 extra tips. am loving it. better than the other 2 i have. ty
Anonymous on
Oct 19, 2021
Recommend to a Friend
awesome unit
5.0
this unit works great, does the Job !!
Verified Purchase
Kevin Habhegger on
Sep 28, 2021
Recommend to a Friend
A Great Soldering Iron
5.0
I replaced a Weller WTCPS with the Hakko FX888D after using the Hakko at the WMU plasma lab to do some repairs on equipment. It is better at maintaining tip temperature than the Weller, which makes it easier to get work done properly.
Verified Purchase
Jim Cotton on
Jun 08, 2021
Recommend to a Friend
Hakko FX888D
5.0
Great product...Hakko is #1 best soldering iron. I have purchased many Hakko products from you and have been happy with product and delivery times!
Verified Purchase
Valerie Fish on
Apr 28, 2021
Recommend to a Friend
Finally got my own!
5.0
I have used this station for many years at my workplace and now I finally got my own. It's simple and quick to use once you get the hang of it, works well for all kinds of jobs - tiny 0201 SMD to big power electronics parts!
Also, I was happy to know that it now comes included with a chisel tip by default!
Verified Purchase
Sri on
Apr 05, 2021
Recommend to a Friend
soft cutter
5.0
excellent product
Parameswar Hari on
Apr 04, 2021
Recommend to a Friend
Great little station
5.0
I love these cheap stations. We have expensive soldering equipment but we seem to grab for these more often then we'd like to admit. Just works the way a station should.
Verified Purchase
Robert Dee on
Mar 20, 2021
Recommend to a Friend
Hakko soldering station
4.0
Works as advertised. Plenty of accurately controlled heat when needed and the presets and programming are very convenient --BUT-- for some unknown reason, the user guide distributed in the US does not fully explain how to set up and program the unit. You must go to the web site and download the other user guide.
Also a bit disappointed that the tip did not last as long as I would have expected.
Anonymous on
Feb 27, 2021
Recommend to a Friend
even a beginner can do well with this
5.0
as long as they understand the theory behind soldering. High heat and stronger power supply make good soldering much easier and faster.
Verified Purchase
Anonymous on
Feb 23, 2021
Recommend to a Friend
Amazing Starter Station
5.0
Great solder station for the price. Easy to use and program. Other tips are easy to find. Make sure you are using good solder.
Verified Purchase
Ryan Clark on
Feb 21, 2021
Recommend to a Friend
Excellent product and service
5.0
Top notch customer service. You actually get to talk to a real person here in the states who actually sounds like they like their job and cares about keeping you as a customer. Due to me being a new customer, I had some questions and they were very helpful!! Fast shipping and product was packaged well. The iron is fantastic. I have been using an old weller for years and procrastinating upgrading. But holding components in place with my third hand waiting for the iron to warm up finally got old and I ordered this one. For the life of me, I can't figure out why I didn't get this earlier!! Trust me, get this iron, you will not regret it! Heats within 20 or 30 seconds to 650 f. Stand is stable, iron chord is just right length, tip stay hot on demand. Will be ordering future needs through Test Equipment!!
Verified Purchase
Dave F on
Feb 17, 2021
Recommend to a Friend
great soldering iron
5.0
I've purchased several things from TEquipment. Great products and fast shipping. I recommend.
Anonymous on
Jan 23, 2021
Recommend to a Friend
Excellent First Choice for RC Electric Soldering
5.0
Since involving myself in Radio Control electric planes, all my soldering jobs were done by my Local Hobby Shop. They stopped doing that and I was left without a solution. My requirements involved components with a wire size from 10-14AWG for large batteries and barrel connectors that range from 3.0-4.0mm diameters of gold-plated material. Too expensive to screw up! Especially when some plugs are encased in a silicone housing. Apply excessive heat and they will melt to the point where they become distorted and not safe to use. The LHS uses the Hakko 951 which they use on a near daily basis. A step down from that is the FX888D-23BY. After 2 months of usage, it has turned out to be a great choice. It is easy to use and amazingly effective. It makes my soldering jobs look like I am a pro. No more wasted connectors, and no more frustration. I am totally satisfied with TEquipment's price for this great little machine which is a complete soldering station for my needs. It didn't take me long to figure out how to get it going. Of course, a few YT videos, the right solder wire, and flux made my success easier to arrive at. I recommend this station to any one with similar needs as mine.
Alamo Stetson on
Jan 23, 2021
Recommend to a Friend
Great for trimming leads on circuit boards, they can cut very well.
5.0
Lots of other cutters went into the garbage when i got these, they are sharp, and can cut leads very easily. I love using them.
Verified Purchase
Joseph Massimino on
Jan 15, 2021
Recommend to a Friend
Hakko CHP-170
5.0
Great cutters!
Used them on some sheet metal, still holding up.
For the price you can"t beat them.
Hakko CHP-170 on
Jan 03, 2021
Recommend to a Friend
PURCHASING
4.0
GREAT ITEM
on
Dec 21, 2020
Recommend to a Friend
PURCHASING
4.0
GREAT ITEM
on
Dec 21, 2020
Recommend to a Friend
Hakko FX888D-23BY
5.0
Great iron!
I been using an 20 dollar unit.
This kicks a$$.
Verified Purchase
Jose Desousaj. dEsOUSA on
Dec 20, 2020
Recommend to a Friend
Hakko FX888D
5.0
Nice, beats my 25 dollar unit of 15 years.
Verified Purchase
J DeSousa on
Dec 02, 2020
Recommend to a Friend
Better than the rest.
5.0
I'm glad I bought name brand, the "low cost" cutters are not really that much cheaper.
Sorry Hakko, I used them as tin snips (on slightly oversized gauge sheet metal).
They held up.
Verified Purchase
J. DeSousa on
Dec 02, 2020
Recommend to a Friend
Quality Product
5.0
Quality product but you should check out soldering stations on YouTube. This technology is quite old and for the price, it's quite a lot. The soldering station takes around 25 sec or so to reach the default 700 Degrees F. It can seem like a long wait if you need to turn it off for a bit and turn it back on. As most reviewers mentioned, the interface is not intuitive at all. But regardless, I'm still pleased with the product.
Verified Purchase
Timothy Chan on
Dec 02, 2020
Recommend to a Friend
Hakko FX888D
5.0
As always when dealing with tequipment the item showed up before the deadline. Well packaged. The Hakko is a great little soldering station. My only regret is I didn't order one years ago, looking back at all the cheap crap I've 'made work' seems like it cost me more than what would have if I just ordered the right tool for the job. Lesson learned.
Will Masters on
Nov 30, 2020
Recommend to a Friend
Nice soldering station
5.0
Works great! Worth every penny.
Verified Purchase
DW on
Nov 27, 2020
Recommend to a Friend
Great flush cutters
5.0
Nice pair of flush cutters for electronics work.
Verified Purchase
Anonymous on
Oct 29, 2020
Recommend to a Friend
Decent cutters
5.0
Affordable and durable flush cutters. I would buy again.
Verified Purchase
Tekmahn on
Oct 15, 2020
Recommend to a Friend
tiny lead clipper very helpful
5.0
small, lightweight, easy to use.
Robert Berman on
Sep 29, 2020
Recommend to a Friend
Small handy and perfect for small electronics work
5.0
These are pretty sturdy and cut cleanly
on
Sep 27, 2020
Recommend to a Friend
Small handy and perfect for small electronics work
5.0
These are pretty sturdy and cut cleanly
on
Sep 27, 2020
Recommend to a Friend
hakko cutter
5.0
This is a nice cutter that you can get a close cut on all kinds of wires. They are just the right size to get in close.
on
Sep 27, 2020
Recommend to a Friend
Nice Upgrade
5.0
This soldering iron was a huge upgrade from the cheap one I bought at Walmart. It keeps heat and distributes it evenly. Very nice for smaller components that need precise heat. Would definitely recommend. Worth the price.
Verified Purchase
Ryan on
Aug 25, 2020
Recommend to a Friend
Great side cutter!!
5.0
Great side cutter for cutting off legs from soldered diodes. I also have used this to cut the pieces for my gundam kits and it works great!
Verified Purchase
Ryan on
Aug 25, 2020
Recommend to a Friend
it's The One
5.0
It's never let me down
Sam Rad on
Aug 13, 2020
Recommend to a Friend
Would recommend
5.0
These work great and are a good price. I like the angled cutter head for getting into tighter spaces. I do wish the spring loaded action was a little stronger but it's not a big enough concern to look elsewhere.
Verified Purchase
Kyle on
Aug 08, 2020
Recommend to a Friend
Hakko CHP-170
5.0
Very satisfied with the tool and the service
Verified Purchase
Jose Andrade on
Aug 02, 2020
Recommend to a Friend
Really nice
5.0
These get extremely close to the solder and make a nice clean cut. I highly recommend
Verified Purchase
Kirk on
Jul 16, 2020
Recommend to a Friend
Best soldering gun
5.0
I have been soldering for years mostly using cheap soldering irons but having to replace them often. This gun is extremely reliable and heats up really fast.
Verified Purchase
Kirk on
Jul 16, 2020
Recommend to a Friend
Great Soldering Station
5.0
I picked this soldering station up recently and I am very pleased with my purchase. The unit is built very well and is reasonably priced. It’s a pleasure to use. Highly recommended!
Verified Purchase
Ron Franks on
Jul 07, 2020
Hakko FX888D works great, but terrible controls.
2.0
This iron can definitely put out and maintain some heat, build quality feels excellent, but unless you solder at a fixed temperature, changing the temperature will be quite frustrating. Only after calling Hakko support have I got it working properly, they are very helpful and quite familiar with this product and how to correct the settings (I wonder why). Despite how well the iron works, having to memorize or look up how to use a SOLDERING IRON is insane. I would have never guessed it possible to over engineer a soldering iron.
Verified Purchase
Francis on
Jul 05, 2020
Recommend to a Friend
Hakko Cutters
4.0
What I expected. Good price Took a long time to arrive.
Anonymous on
Jun 29, 2020
Recommend to a Friend
Great inexpensive cutters
5.0
I am only an electronics hobbyist but also a professional building contractor, so I am familiar with tool quality. These are great, sturdy little cutters and while maybe not what a pro would want for heavy use, for 5 bucks and light-duty use they are super comfortable to hold and use and you can't beat 'em. They will easily and cleanly cut one single strand of stranded wire, or snip a clean end on a pre-tinned 14g wire end. Grab a couple of these bad boys and put 'em in your kit.
on
Jun 15, 2020
Recommend to a Friend
Great product at a great price
5.0
Soldering iron works as advertised, lots of different tips available for whatever the use case is.
Verified Purchase
Aaron on
Jun 04, 2020
Recommend to a Friend
Great Workhorse Iron
5.0
I do a lot of soldering at home and at work on a variety of circuits, big and small, and this iron has never let me down. Heats up quick and stays hot, and the iron itself feels great and ergonomic. The user interface is confusing but well-documented, and for how I use it, I've never needed to make any adjustments so it's only a minor annoyance. I'd recommend this in a heartbeat.
Verified Purchase
Evan on
May 19, 2020
Recommend to a Friend
Hardened steel, sharp edges, ergonomically engineered
5.0
This wire cutter is a precision device, with very sharp cutting edges. I reach for it, and only it, every time.
Paul Simone on
May 15, 2020
Recommend to a Friend
Great soldering station!
5.0
I would have never been able to solder circuit boards on flight controllers without this tool. Unlike some reviews, I found it easy to navigate the menu. It is super easy to change temperatures while on the fly. Heats up in seconds which is amazing and also cools down quickly to change tips. Haven't got into the programming presets but I'm sure its not difficult.
Kevin on
May 15, 2020
Recommend to a Friend
Reviews are on spot!
5.0
Great tool for beginners and novice hobbyist. Will grow into this as my skills develop. Well built and worth the price.
Verified Purchase
Bryan B on
May 07, 2020
Recommend to a Friend
All that and then some!
5.0
Great product by Hakko. It's light and strong. Awesome price for such quality craftsmanship.
Verified Purchase
Bryan B on
May 07, 2020
Recommend to a Friend
Can't go wrong with this one
5.0
At this price.. I have from cheap crappy ones to 10x more expensive. This one is a good quality, pretty well aligned. Will tell you what happens a year from now :)
Verified Purchase
JJ on
May 06, 2020
Recommend to a Friend
Haako FX-888D
5.0
Nice solder station kit. Combo kit came with extra tips (good selection!) Should read the manual first to figure out how the controls work, but you can just set the temp and forget it if you're doing simple soldering. Perfect for hobbyists, makers, amateur radio, etc. Simple for younger users, too.
Verified Purchase
KD9CJX on
May 04, 2020
Recommend to a Friend
Best price for the best nippers by Hakko
5.0
It is hard to find good nippers, but I have very good luck using these. TE has the best price when you buy in bulk.
Joseph Massimino on
Apr 10, 2020
Recommend to a Friend
Hakko FX888D-23BY
5.0
I am very pleased with the performance with my new tool. I have been using cheap soldering irons for a long time and the Hakko is a huge upgrade.
Verified Purchase
Jim Tesseneer on
Mar 09, 2020
Recommend to a Friend
Excellent Value
5.0
I picked up this unit based on several recommendations from professionals. I'm very pleased with the performance thus far. I chose this because I wanted something that was of decent quality but I'm not a pro so I didn't want to spend hundreds. This is the perfect balance of quality and price. They even threw in a roll of solder, picked up the tax and gave free shipping.
Verified Purchase
Lefty on
Feb 25, 2020
Recommend to a Friend
Excellent station
5.0
Excellent station to use. Prior to this, used an iron with controls built into the handle. This station makes soldering much easier. Quick heat up and recovery times. UI leaves a bit to be desired, but perfection is a concept, not a state.
Verified Purchase
Trent on
Feb 10, 2020
Recommend to a Friend
Nice little clipper
5.0
Cuts little wires nicely. Not too wide at tip so it gets into smaller spots. Handle fits hand well and is non slip. Black rubber on outside of grip is nice shape and grippy without being soft or sticky.
on
Nov 09, 2019
Recommend to a Friend
Decent side cutters
5.0
I was pleasantly surprised when I took this out of the package, considering the cost. It looks like it will do the job for many years. It fits in my hands very well, and has nice rubberized handles.
Verified Purchase
Matthew on
Nov 09, 2019
Recommend to a Friend
High Quality Soldering Station
5.0
Do yourself a favor and get a quality soldering iron like this Hakko. The base station is heavy and solid, it is well made, and even the stand is made of metal, decently heavy, with rubber non-slip feet. So it's not going to slide all over the place on your bench or get easily knocked over. The soldering iron itself has similar quality, and Hakko irons/tips are so good, there are a whole ton of cheap knockoff versions out there! This iron is a case of "one and done" - buy this one, and be done with buying soldering irons for a long, long time.
Verified Purchase
Matthew on
Nov 09, 2019
Recommend to a Friend
Excellent product, supper fast shipping
5.0
I used this iron regularly for the past four months. Never give a problem and very solid performance. With the fast shipping and price here, you cannot go wrong with this.
Verified Purchase
Dave on
Nov 08, 2019
Recommend to a Friend
Hakko clipper for circuit board components and wires
4.0
Good clipper for (relatively) soft wire and component leads on circuit boards. Appears well made (it IS a Hakko) and was delivered promptly. Glad I bought one!
Verified Purchase
Lawrence Gutter on
Oct 18, 2019
Recommend to a Friend
FX888D Soldering Station
5.0
Great iron/station. Intuitive UI/controls, gets up to temperature fast, solders great. Thanks.
Verified Purchase
Scott Brown on
Oct 11, 2019
Recommend to a Friend
Great Soldering Station
5.0
Had held off buying one of these for a while, but I finally decided to take the plunge. Tequipment had the absolute best price I could find, especially as an educator. Soldering station is well built and works great. Only wish I had more soldering projects to work on!
Verified Purchase
Andy on
Aug 15, 2019
Recommend to a Friend
I like this iron
5.0
My first digital soldering station with the Preset mode. I need to figure this out as the factory settings seemed to be working fine, but I touched one of the two front panel control buttons and it was off to the races / instant 899°F. Nice compact Digital Soldering Station - My first jump over to Hakko - and I am pleased as punch. The iron fits well in my hand - cools down so so when I need to change a tip, it seems that a 10mm wrench does the trick. Overall I am very pleased - The price is right and it came with a 1 lb Amerway - SN63 / PB37 Tin / Lead Solder. I even like the USA Blue/Yellow Colorway.
Verified Purchase
Jonathan on
Aug 06, 2019
Recommend to a Friend
Great Tool......
5.0
All the hype is true, if you do more than just a little soldering this is the bomb. Spend a little extra and go for it, you won't regret it. So happy with my purchase.
Verified Purchase
Jim Doherty Jr on
Jul 29, 2019
Recommend to a Friend
Quality product
5.0
This is an amazing soldering station. I did a lot of research before buying this product.
It's about a hundred USD so it's not the cheapest soldering station out there. However, this product is really well built - I'm probably going to get a new station for features before this stops working, and replacement parts are really easy to find.
Hakko also produces literally every tip type you may need!
Verified Purchase
Devyash Lodha on
Jul 19, 2019
Recommend to a Friend
Good Iron
5.0
So far this is a very good soldering station. Easy to use and heats up quickly.
Thanks;
David
Verified Purchase
David on
Jul 04, 2019
Recommend to a Friend
Good & Cheap
5.0
Great price for Great cutters
Verified Purchase
Anonymous on
Jul 01, 2019
Recommend to a Friend
Good standard iron
5.0
A good "standard purchase" iron, this one has been serving me well for quite a while, as well as a great many others.
My only complaint is the user interface and how easy miscalibration is, which caused me to erroneously set the calibration temperature versus the set point temperature on more than one occasion. That in turn caused me to buy the Hakko FG100-2 tip thermometer to recalibrate the station, which is more than double the cost of the station itself! (But worth it, in any case.)
If I had to do it again though I would probably buy the Pace ADS200; not because there is anything wrong with the Hakko station, which is really pretty good, but just because the Pace is that much better without being unreasonably priced like some of the JBC/Metcal equipment.
Verified Purchase
Michael H. on
Apr 29, 2019
Recommend to a Friend
Perfect affordable soldering station
5.0
Ideal for 99% of my soldering needs. A bit pricey, but it's built properly and won't burst into flames like a typical low-dollar Chinese unit. Cheap clone tips work great, too.
Verified Purchase
Anonymous on
Apr 15, 2019
Recommend to a Friend
Great shipping great product
5.0
HAKKO FX888D-23BY DIGITAL SOLDERING STATION, is an awesome soldering station, and TEquipment was great to work with and shipped quickly.
Verified Purchase
Kevin Allred on
Mar 26, 2019
Recommend to a Friend
Excellnent value
5.0
I purchased this unit last week and after using it I was very impressed. Iron heats up quickly and adjustable temp works well! Tips last for a long time as well!
Verified Purchase
Robert M. Gaw on
Mar 19, 2019
Recommend to a Friend
Hakko FX888
5.0
Hakko iron is well made Solid and heats to temp quickly. . Delivery was prompt and pricing excellent.
Using for small jobs on vintage stereo equipment.
Order from Tequipment-the product is the real deal and not some knock off.
Verified Purchase
Anonymous on
Mar 04, 2019
Recommend to a Friend
Great value soldering station
5.0
The Hakko FX888D soldering station is a great value for money. For around $100, it heats up faster, and does a better job than a more expensive Weller it replaced. The built quality is excellent as well. Good variety of low priced tips are available for it. A definite buy.
Verified Purchase
keith virge on
Feb 18, 2019
Recommend to a Friend
Amazing soldering station
5.0
Great product, heats quickly, holds the heat well even when soldering thick PCB. My first major purchase of a more professional oriented soldering station, and I am greatly impressed. I'll never go back to local hardware store junk irons again. Been eyeballing a Hakko station for years and glad I finally made the purchase. Ill highly recommend this station to anyone who is looking to invest in a high quality soldering station.
Verified Purchase
James Gosnell on
Feb 07, 2019
Recommend to a Friend
Good Cutter
5.0
Good cutter that works well. Nice handles that are comforable to hold. Spring works well to open cutter.
Verified Purchase
Carl Smith on
Jan 23, 2019
Recommend to a Friend
Great for the price
5.0
Heats up really fast. Easy to control and lots of different size tips to use.
Verified Purchase
Kenneth Veznaian on
Jan 20, 2019
Recommend to a Friend
A well-made tool !
5.0
After struggling along with an older soldering station, the HAKKO FX888 soldering station and its quick heat recovery time has made work a breeze! ps... don't forget to order a variety of tips.
Verified Purchase
Bruce Manning on
Jan 17, 2019
Recommend to a Friend
Very Nice Instrument!
5.0
The Hakko soldering station was recommended by a seasoned tech. I am enjoying the quick heat-up and recovery. A solidly built tool. Just a reminder... be sure to order a variety of tips for your projects.
Verified Purchase
Bruce Manning on
Jan 15, 2019
Recommend to a Friend
Convenient and sturdy.
5.0
A convenient tool for flush cutting along my circuit boards. 'Nuff said.
Verified Purchase
Mordecai Glicksman on
Dec 09, 2018
Recommend to a Friend
Awesome solder station
5.0
I thought I was horrible at soldering and decided to give it one more go. Did a ton of research and landed on this. Turns out I dont suck at soldering, my old iron did...
This gets hot quick and the holder/cleaner is a nice bonus. Menu is a bit wonky but I dont have to change temps to often
Verified Purchase
Ryan Conroy on
Oct 19, 2018
Recommend to a Friend
The Gold Standard
5.0
These are just the best, as everyone knows, and you probably need two or three pairs around the workstation so that you don't have to reach very far for them.
Verified Purchase
John Mortensen on
Oct 12, 2018
Recommend to a Friend
Great quality
5.0
My favorite cutter.
Verified Purchase
JAIRO ALBERTO ROJAS BOYACA on
Aug 18, 2018
Recommend to a Friend
Great tool
5.0
One of the most important tools a hobbyist should have. In my opinion, the form factor is the best, as it fits even on a small bench.
Verified Purchase
JAIRO ALBERTO ROJAS BOYACA on
Aug 18, 2018
Recommend to a Friend
Good Iron Given the Cost
4.0
I’ve used this iron for a few years now and find it to be a huge improvement over the old 30W radio shack iron. Heats up quickly and is a decent iron for through-hole component soldering. It does struggle a bit on ground planes or speaker terminals (large thermal masses). Overall it represents good value given its low cost.
Verified Purchase
DK on
Jul 10, 2018
Recommend to a Friend
hakko irons
5.0
Hakko makes the best soldering irons. Tequipment offers great service and prices.
Thanks--
garry
Verified Purchase
GARRY FROCKLAGE on
Jun 25, 2018
Recommend to a Friend
useful
5.0
practical to access small spaces and precise cuts
Verified Purchase
mauricio zamudio on
Jun 16, 2018
Recommend to a Friend
It takes Quality Tools to deliver Quality Work
5.0
I’ve used many different brands of hand tools, & these are the best flush-cutters by far. Comfortable, precision made, & durable!
Gfkdrobi on
Mar 24, 2018
Recommend to a Friend
Nice, Budget Cutter
5.0
One day, I might splurge on an expensive cutter, but for an inexpensive cutter, these work fine and last reasonably long.
Verified Purchase
Thom Mackris on
Mar 24, 2018
Recommend to a Friend
Great upgrade to my dying Weller WES50
5.0
A great upgrade to my dying Weller WES50. The temperature read-out is helpful - especially when soldering larger parts which drain heat.
It's a bit more compact than my well-used, WES 50, and work space on the bench top is always at a premium.
I initially purchased the WES51 (the WES 50's replacement), but the blinking LED status was confusing and when the Weller rep said the behavior was normal, I returned it. An LED that's off when temperature is reached is an absurd convention, IMHO.
Temperature setting controls are a bit non-intuitive (with only two buttons), but I'm sure this will become second-nature after a bit of use.
Initially, I can't figure out how to get the 5 presets to work (when following the instructions) but direct setting of the temperature is easy and I tend to only adjust temperature by the job (i.e. a work session on a circuit board vs. a hard-wiring job). Usually, this involves a tip change as well.
The iron holder is compact, although I wish it had storage "holes" for alternate tips.
Verified Purchase
Thom Mackris on
Mar 24, 2018
Recommend to a Friend
HAKKO Quality
5.0
I am very pleased with the FX888D. When it comes to a soldering station, I look for good temperature regulation and a good selection of tips; browsing through the offering by TEquipment will show you just what's available. At 65W, this is capable of soldering larger lugs and heavy gauge wire, while still handling 0603 resistors just fine. Hands down, this is my favorite soldering station. I'm glad to now have one on my own workbench!
Verified Purchase
Prof_F on
Mar 20, 2018
Recommend to a Friend
Good Cutter
5.0
Good quality, useful for flush-cutting through-hole component leads/
Verified Purchase
Pierre-Luc Drouin on
Mar 13, 2018
Recommend to a Friend
Go-to soldering station for the working tech
5.0
I've had quite a few solder stations/irons in my 20 years as a tech, the Hakko is by far my favorite. Heats quickly, maintains it well, and having 5 presets means it's easy to switch temps as needed. Stop shopping, just buy it!
backstage tech on
Mar 05, 2018
Recommend to a Friend
A joy to work with!
5.0
I've been using R**io Sh*ck irons forever. I had an important project coming up and a friend of mine told me how much he loved his Hakko. I decided it was finally time to get a good soldering station and ordered this one. Wow! This thing heats up almost instantly and my soldering work was done so quickly I couldn't believe it. Now I'm looking for other stuff that needs to be fixed!
JSantus on
Feb 20, 2018
Recommend to a Friend
HAKKO FX888D-23BY
5.0
very well designed , and built , heats up real fast , this unit is great for the shop and hobby user ,extremely high quality at a great price
RON on
Jan 25, 2018
Recommend to a Friend
Works great for the short time I’ve used it.
5.0
This looks and feels like a very high quality product. Nicely painted metal housing, great feel in your hand, and they even used highly flexible silicone insulated wire for the iron. It heats up in a flash, and holds the temperature brilliantly. Highly recommend, though I haven’t used it very long.
Chad on
Jan 23, 2018
Recommend to a Friend
FX888D-23BY
5.0
Great soldering iron and easy to use! It would nice if it had a auto shutoff after 30 minutes for inactivity. For the price it's a great buy.
Verified Purchase
SGW Dave on
Jan 12, 2018
Recommend to a Friend
Quality tool
5.0
I bought two of these, one for my son, and one for myself. I've bought these before from other places, but the blades weren't as precisely aligned as from this company, another quality product.
TechnoMarie on
Dec 31, 2017
Recommend to a Friend
Hakko CHP-170 wire cutters
5.0
Great little wire cutters for the money. I keep several of these around. Great for hobbies and serious electronics work.
Verified Purchase
David BeDell on
Dec 28, 2017
Recommend to a Friend
Hakko FX888D
5.0
Soldered iPad Air 2 charging port with Hakko FX888D. I had to use small and flat tips for the micro-soldering.
My complete order was delivered on time by TEquipment.net. I would recommend this site.
Verified Purchase
Kiran Thapa on
Dec 22, 2017
Recommend to a Friend
Hakko CHP-170 wire cutters
5.0
These little side cutters have the perfect off set angle for circuit board work. They work great for cutting off the through hole component wires and have cut through everything very well. Great tool for the price. I would recommend them.
Verified Purchase
Steven Brauch on
Dec 12, 2017
Recommend to a Friend
unregulated to this = 125cc scooter to new civic
5.0
Up to this purchase I had bought about 6 different unregulated irons. Weller, Goot, etc. I had succeeded in assembling several projects, such as an x0xB0x, but had also failed at a lot of assembling.
For years I had blamed myself, thinking I was missing some key point of technique. I watched videos, used extra flux, roughed terminals up that I was soldering. I tried a lot of things. Eventually I gave up and had partners and employees do all my soldering between their other responsibilities (seriously).
Recently I have needed to do a lot of assembly, including parts with different thermal conductivity and different mass (like soldering to chassis and big ground planes, pots, and still small parts). So, I needed a solution to my soldering situation.
After reading reviews I bought this and some Kester 63/37.
Now, soldering is easy. I'm talking like, had I used this system for the last 20 years, I would never have been convinced there was anything to soldering.
One star off because I don't like the UI. It's fiddly if you want to change temperature. I would prefer a plain old knob. Currently, I'm set for Kester 44. But if I ever have to change it, I'm sure I'll need to RTFM.
Anyways, this thing works, and it works exactly as I would have expected a soldering iron to work if I had never known better. It's not a Tesla or a Cadillac, but it's definitely going to do the job, do it reliably, and do it well.
I would recommend this purchase unless you're going to be soldering a lot of SMT -- then you'd need to consider spending another hundred or two hundred bucks and getting something more suited to the task.
For everything else, this guy does just fine.
Verified Purchase
Jonathan Pratt on
Dec 01, 2017
Recommend to a Friend
Hakko Digital Soldering Station
5.0
Fast shipping. The specifications were out standing. Very happy with ti soldering station. Thanks for being there.
Verified Purchase
Dale Hanson on
Jul 09, 2017
Recommend to a Friend
Solder station
5.0
Great product. Performs as advertised right out of box. Low learning curve. Great results.
Rick on
Jun 20, 2017
Recommend to a Friend
Great inexpensive station
5.0
Excellent little station, heats up quickly and its very high quality. Great option if you need a good inexpensive soldering station.
Verified Purchase
Jorge PD on
Apr 20, 2017
Recommend to a Friend
Hakko FX-888D-BY
4.0
Great fast shipping from TEquipment. Although I don't do much soldering I purchased this to assist in the construction of a model railroad. It replaces an old pencil style iron that was painful to use. This unit heats up fast and the station (something I never had) is very useful. My only complaint is the user interface. I had to go on line and look at the video to figure out how to put it in the Temperature preset mode. It came set up so it would turn on to 750 degrees F and you adjusted the temp from there. the instructions recommend that you clean/tin the tip at 482 degrees F. I adjusted the preset 5 temp from what it came with to 482 degrees thinking it will be easier to remember. Left the other presets as they were since most of my work is pretty basic. From a novice this unit is probably more than I needed , but I enjoy working with good tools.
Rick on
Apr 05, 2017
Recommend to a Friend
Nice Soldering Station
4.0
Have used Wellers in the past. But, Hakko now seems to have more usable tip selection than Weller, and I've read reviews on quality issues with the Wellers. I'm not crazy about the look (color scheme) of this station, but it seems to be a good unit for an affordable station.
Verified Purchase
Barry on
Mar 12, 2017
Recommend to a Friend
Hakko FX888D
5.0
Just by looking at this soldering station you can see the quality is amazing. I own an Aoyue (older Hakko clone) and doesn't even come close in quality. For the small price difference I would definitely recommend this Hakko unit!
Verified Purchase
Raymundo Magana Gomez on
Feb 21, 2017
Love it
5.0
Use this for my RC hobby. Makes quick easy work of soldering. Well worth the money for its ease of us and reliability.
Paul on
Feb 09, 2017
Recommend to a Friend
Works like a charm
5.0
Worth the investment for a beginner. Heats up quick (15-30 seconds) and keeps temp. Work station is well built -- not flimsy. Keep the instructions, power station is easy to read but resetting the presets may not be intuitive without the instructions. Good value, reliable tool
Anonymous on
Feb 07, 2017
Recommend to a Friend
Very Nice!
5.0
My first solder station and I'm very happy with it. I have soldered before at my job but never owned my own until now. I'm glad I got it.
Verified Purchase
Angel S on
Feb 05, 2017
Recommend to a Friend
Great soldering iron!
5.0
I needed to replace some caps on an lcd monitor that was acting up. I broke out my old no name wand iron that took 5 minutes to get hot enough to tin the tip and was unable to maintain heat to desolder the caps. After receiving it, I plugged it in and was amazed when it heated to 750 F in a little over 10 seconds. I was able to desolder old cpas and resolder new caps in less than 5 minutes. I am incredibly happy with the purchase.
Verified Purchase
Dennis Partin on
Jan 31, 2017
Recommend to a Friend
Excellent Product
5.0
I had an lcd monitor that lost horizontal hold because of a couple of bad caps. I broke out my old wand soldering iron that took 5 minutes to come up to a temp hot enough to tin the tip. It would not hold temp long enough to desolder the first cap. The Hakko heated up to 750 F in less than 10 seconds and made short work of the desoldering and resoldering 2 capacitors.
Verified Purchase
Dennis Partin on
Jan 28, 2017
Recommend to a Friend
Instrument Tech
5.0
I really enjoyed the way you plugged it in and 30 sec later you were ready to go. The holder also works great.
Scott Lindsey on
Jan 13, 2017
Recommend to a Friend
Hakko FX888D
5.0
Excellent soldering station. Heats up quickly. Easy to adjust temperatures.
Verified Purchase
Carlos Giroud on
Jan 08, 2017
Recommend to a Friend
Nice Product
5.0
Nice good quality and affordable can use different soldering tip and tips are inexpensive.
Al on
Jan 08, 2017
Recommend to a Friend
Good Pair of Cutter
5.0
well made and good quality
Anonymous on
Jan 08, 2017
Recommend to a Friend
CHP-170
5.0
Great product for the price. We love these little clippers.
Amy on
Nov 28, 2016
Recommend to a Friend
Spoldering is fun!
5.0
After years of struggling with non-temperature controlled soldering irons, oxidizing tips and poor solder joints I found that my new Hakko is a pure delight. Should have bought one years ago!
Albert Z on
Nov 25, 2016
Recommend to a Friend
Hakko FX-888D
5.0
Awesome unit at a great price..Easily better than anything I've used in the past.. Heats up very quick, digital temp controller is very accurate. TEquipment's customer service is top notch!
Verified Purchase
Jordan M on
Nov 18, 2016
Recommend to a Friend
Awesome!
5.0
This soldering station is awesome, I can't say enough good things about it!
Verified Purchase
Lowpuller on
Oct 16, 2016
Recommend to a Friend
Hakko FX-888D
5.0
Great soldering station. Up to set temperature within 15 seconds of switch on. Nice light iron. Tips are easy to change and come in a great variety. Excellent service from TE .. It will probably last longer than I will .. well designed and built.
Verified Purchase
Robert Reiber on
Sep 06, 2016
Recommend to a Friend
Hakko FX888D
5.0
I agonized quite a bit before buying this - concerned about the price, and whether I should be getting a Weller instead. After completing a lengthy SMD project using this iron, I'm extremely happy I made the purchase. The ergonomics, temperature stability, and overall performance are all great. It's just a case of investing in quality tools - they'll last a long time.
Anonymous on
Sep 04, 2016
Recommend to a Friend
Hakko Digital Soldering Station
5.0
Hakko Digital Soldering Station is one of the best inexpensive soldering station out in the market. If you are looking for high quality soldering station with a low-budget, Don't think twice about it, get the Hakko FX888D-23BY Digital Soldering Station! look at me I sound like a infomercial it just shows how much I like it.
Verified Purchase
Garcia on
Aug 26, 2016
Recommend to a Friend
Great Tool
5.0
No regrets what so ever. Feels good in the hand cuts nice and clean.Great tool
Verified Purchase
Kamal Welcome on
Aug 20, 2016
Recommend to a Friend
Great Soldering Iron
5.0
This was recommended to me by a car buddy. I purchased it for replacing about 25 capacitors in my car stereos amplifier. This made the job a pleasure, the temperature control is great. I would recommend this iron to anyone looking for a digital soldering station, you get a lot of iron for the $$.
Anonymous on
Aug 08, 2016
Recommend to a Friend
Hakko FX-888D
5.0
This is my first Temp Controlled soldering station.
Took a few minutes to set some temp presets. Easy peasey!
The station is exactly as advertised.
Now you can purchase this station from many vendors but the price was great and more importantly, the customer service guy was outstanding. Customer service is important to me and I will go to TEquipment for my next purchase.
Verified Purchase
Thomas Vogt on
Jul 28, 2016
Recommend to a Friend
Get One
5.0
This is the first temperature controlled iron I've used. Compared to the popular 'power' controlled iron I was using: this is twice as expensive and infinitely better! Heats up in less than a minute, with temperature read-out. The default 750 deg F quickly does joint after joint without waiting for the temperature to rebound. When you set it aside hot for a while, there is with very little oxidation on the tip - i.e. it does not overheat when idle. Only suggestion I can make, besides GET IT, is to also get the 1.2 mm tip for through-hole circuit boards.
Verified Purchase
Howard Matthews on
May 03, 2016
Recommend to a Friend
FX-888D
5.0
Excellent Soldering station for the price. Very responsive and well made. TEquipment has great prices and makes the ordering process easy.
Verified Purchase
Multer kevin on
Mar 23, 2016
Recommend to a Friend
Great soldering station!
5.0
Great soldering station for the price. This is my second Hakko. I also have the analog station which I purchased quite a few years ago. Pick up some different tips and you can do just about anything with this iron. Nicely made unit.
Mike on
Mar 08, 2016
Recommend to a Friend
Hakko Rocks
4.0
Great soldering station. Great features. Should last decades. Only four stars because my original Hakko 926 is still going strong after 20 years (but the 926 is no longer available). You can't go wrong with the FX888. Worth every penny. I could have got this at my local store, but Tequipment.net had the best price, by far, and fast shipping. Thanks Tequipment.net!
Verified Purchase
teamSMITHusa on
Mar 03, 2016
Recommend to a Friend
ICE,Inc Hakko FX888D-23BY
5.0
Added the Hakko FX888D-23BY soldering station in with our two older Hakko 926 stations. Our long time preference has been Hakko's.
They have excellent heating element and tip life, fast accurate heat. Proper tip selection handles lead free solder nicely. Hand piece is cool operating when on for long periods. Our Hakko's have far outlived any of the other name brands we've used in the past.
Richard Misturak on
Mar 02, 2016
Recommend to a Friend
Excellent
5.0
Received this item very quickly, very happy with TEquipment service and shipping.
Product is excellent. I bought it to replace an old Weller soldering station which I've had for years. This is definitely an upgrade. Heats up quickly, holds temp, Soldering pen and tips are very nice. Would definitely recommend to anyone looking for an inexpensive but great performing station.
Verified Purchase
Robert Privitere on
Jan 30, 2016
Recommend to a Friend
Hakko 888d Soldering Station
5.0
We gave one of these to our son last year for Christmas so now I've actually purchased two! My husband is a technician at Lockheed Martin and uses this product at work so he wanted one for his home workshop and requested this. The quality is top-of-the-line and is a nice compact size.
Verified Purchase
Kerry Atkins on
Dec 15, 2015
Recommend to a Friend
Awesome Soldering Station
5.0
I have been using this soldering station for a while now. This thing heats up FAST! It is worth every cent. You can be soldering all day and you won't be burned. It always stays cool at the handle. It is easy to change tips and setting the temperature its easier.
I would recommend buying this, is it built with great quality and definitely will last you al long long time.
Verified Purchase
Kamel Kafati on
Nov 25, 2015
Recommend to a Friend
Soldering station
5.0
Great piece of equipment at an excellent price!
Terry on
Nov 24, 2015
Recommend to a Friend
Awesome Product and Great Customer Service..
5.0
I got this a while ago and it's an awesome product and Tequipment is one of the best companies around to buy and deal with case of a problem..
Verified Purchase
jason on
Nov 18, 2015
Recommend to a Friend
Awesome Product and Great Customer Service..
5.0
I got this a while ago and it's an awesome product and Tequipment is one of the best companies around to buy and deal with case of a problem..
Verified Purchase
jason standhope on
Nov 18, 2015
Recommend to a Friend
hakko
5.0
excellent product. took a little long for shipping, must have been on back order.so far was worth it.
Verified Purchase
Daniel Mertowski on
Nov 07, 2015
Recommend to a Friend
Quality Iron
5.0
Added this iron to a fleet of Hakko 936/908 Irons. Mixed feelings, Iron works great but the digital is a little cumbersome to change the temperature setting. Will be perfect for less skilled workers that shouldn't be adjusting the temp.
Steve on
Oct 28, 2015
Recommend to a Friend
Great workstation in a small package
5.0
This station has it all: simple controls, quick warm-up, and a low price. A great addition to my workbench!
Verified Purchase
Nick from DC on
Oct 25, 2015
Recommend to a Friend
HAKKO FX888D-23BY
4.0
Awesome product, my only problem, it was difficult to understand the preset settings after that though everything is good. If you want a great soldering station this is it.
Tom on
Oct 16, 2015
Recommend to a Friend
Good tool
5.0
This is a well designed and well made tool. Performs very well.
Verified Purchase
Joshua Condict on
Oct 07, 2015
Recommend to a Friend
So hot, so fast
5.0
This solder station is exceptionally well functioning. It heats up from room temp to 899? F in about 45 seconds. The thermal recovery is great and it only took a couple of days for delivery with the free shipping.
Verified Purchase
Joshua Condict on
Oct 07, 2015
Recommend to a Friend
hakko fx-888d
5.0
Very well built soldering station. Highly recommended.
angel l torres on
Sep 27, 2015
Recommend to a Friend
Quality Station
5.0
I got this with the 4 extra tip package. The extra tips should be good for all package sizes from 0603 to medium size thermal pads. Everything works as it should. My only complaint is the incomplete user guide. The guide doesn't explain how to change the station to the preset mode which toggles the operating temperature between 2 to 5 preset temps. This mode is a must and changing to the mode is unintuive. Changing the temp on the digital version of the 888 takes a few too many button presses is the normal mode. Once I got the online manual it took a few minutes to set my temp presets and now is running as I need it. The setup is a one-time thing and automaticly saves all last settings and presets on startup. Best value I found. Small, cheap and quality.
Verified Purchase
Edward McLean on
Sep 25, 2015
Recommend to a Friend
Great soldering station
5.0
I know there are more expensive solder stations out there, but this one does everything I need, and does it very well. Highly recommended!
Verified Purchase
BK on
Aug 31, 2015
Recommend to a Friend
HAKKO FX88D
5.0
Very well built station. Would tell others to buy this SOLDERING station.
danny on
Aug 23, 2015
Recommend to a Friend
Hakko wire cuters
5.0
Great
Verified Purchase
Robert De Guarde on
Jul 10, 2015
Recommend to a Friend
hakko 888d
5.0
great soldering station, heats up within 30 seconds
Verified Purchase
Robert De Guarde on
Jul 10, 2015
Recommend to a Friend
Hakko FX888D-23BY
5.0
For general purpose and home electronics. The build quality of this device was surprisingly good and the small footprint is great for those with limited space. A variety of tips are available to suit just about any need. The UI is a bit taxing, but once I get more practice with it I should get used to it. For the price you would be hard pressed to beat this.
Verified Purchase
Stefan Ignasiak on
Jul 02, 2015
Recommend to a Friend
Excellent station for the money
5.0
After doing much research on soldering stations, I settled on this unit. I am very pleased with the purchase. The price-to-performance ratio makes this product difficult to beat. It is very well designed and heats up extremely fast. Highly recommend!!
Verified Purchase
vinyl_79 on
Jun 28, 2015
Recommend to a Friend
Hakko FX888D
5.0
High quality soldering iron for a home lab. It's a little pricey for the average weekend hobbyist, but if you take your soldering seriously or solder often, the price is nothing compared to the quality you're getting.
The UI was intimidating at first, but after a few minutes, I got used to it.
Verified Purchase
Tom Baker on
Jun 24, 2015
Recommend to a Friend
Best Service
5.0
Hakko makes wonderful products and they are the best products out there for the money...I would suggest buying all your electronics and tools and needs from Tequipment.net you won't find a better place..
Verified Purchase
Torque on
Jun 17, 2015
Recommend to a Friend
Best Service
5.0
Hakko makes wonderful products and they are the best products out there for the money...I would suggest buying all your electronics and tools and needs from Tequipment.net you won't find a better place..
Verified Purchase
Torque on
Jun 17, 2015
Recommend to a Friend
Best Quality iron for this price range
5.0
The Hakko FX888D is a great digital soldering iron. The display is great, the digital display is much better than the old analog version. The temperature control is accurate and fast. There is very little down time when changing temperatures either up or down and when starting up the iron.
The preset temperature function is somewhat confusing to operate. Also, the iron could use a LED ON/OFF indicator. This can be a safety concern because it is very easy to leave the iron on overnight if the display is concealed.
Overall, this is the best quality iron for this price range. It is definitely versatile with multiple different tips available for multiple applications. The build quality is strong and durable, yet lightweight. Iron is comfortable for long hours of soldering at a time, should not hurt your fingers.
Malcolm on
Jun 16, 2015
Recommend to a Friend
Decent Iron for the money
3.0
For the price I dont think you can go wrong, in terms of getting a iron thats reliable and that you will be able to buy parts for in the future.
That being said I think I still prefer my chinese Aoyue branded iron, as it has a much higher thermal capacity, I have done a lot of soldering with this Hakko over the past month, and any large joint or high thermal mass part requires really cranking the irons temperature, or it takes a long time to wet the joint.
Contrasting with my cheap and old Aoyue, which I have checked it does hold temperature reasonably accurately, not as well as the Hakko, but it is able to wet very large joints with ease.
The cable for the iron is very nice on this unit, and the small footprint is great for a small bench. I think this unit will grow on me once I get more practice with it and get used to it, and for the price you would be hard pressed to beat the build quality.
Justin on
Jun 02, 2015
Recommend to a Friend
hakko888d solder station
5.0
Got this hakko888d solder station and could not believe how well it solders,really works well.and Tequipment that I ordered from was really good to do business from,fast service and customer service was so nice.will be ordering again in the future.
Verified Purchase
Dennis Hall on
May 28, 2015
Recommend to a Friend
Hakko Cutter
5.0
Hakko has good quality products.
Anonymous on
May 25, 2015
Recommend to a Friend
Hakko CHP-170 excellent tool
4.0
Have used this cutter for several days now for hours at a time and I am very happy with the comfort in my hand. Sharp clean cuts removing SMT and TH leads on components for reuse and repair. Would give it 5 stars, but need more time in use to evaluate wear and sharpness after a few months.
Verified Purchase
Henry on
May 19, 2015
Recommend to a Friend
HAKKO FX888D-23BY
5.0
The Hakko FX888D soldering station was shipped on time and is a joy to use. Heats up within a minute or two and soldering like a dream. If you have a problem with your soldering you can be assured it's not the gun. This thing is very well constructed and easy to use. Highly recommended!
Verified Purchase
Gregory Raft on
May 18, 2015
Recommend to a Friend
Still the gold standard
5.0
As always Hakko sets the bar for the everyday use soldering station. Heatup is very fast with the digital display counting up the degrees faster than the price on a gas pump. The cord is very flexible and does not pull the base unit around as you move the iron. The two options for tip cleaning built in saves me bench space from my separate brass wire cup.
Verified Purchase
TeslaPunk on
May 15, 2015
Recommend to a Friend
Great Buy !!
5.0
Outstanding product excellent service quick shipping and quality packaging!!
Verified Purchase
Josh Adams on
May 13, 2015
Recommend to a Friend
The BEST iron for the money!
5.0
Hands down the best soldering station I have ever had, especially for the price! Heats up within about 20 seconds to 800* and works perfectly! I love it!
Verified Purchase
EVAN WILLIAMS on
Apr 27, 2015
Recommend to a Friend
Affordable and easy to use
5.0
My first "real" soldering iron. This is quick to set up and easy to use. It preheats quickly to the set temperature and gets the job done.
No frills, but everything I expected!
Anonymous on
Apr 26, 2015
Recommend to a Friend
Hakko FX888D-23BY Soldering Station
5.0
This is an outstanding soldering station in terms of design and portability. It is very easy to both set and change temperature. The hand piece is light and the separate holder with sponge and cleaning mesh makes it simple to clean.
Anonymous on
Apr 20, 2015
Recommend to a Friend
Great
5.0
Great close clip on board. Nice for the price!
Verified Purchase
keith black on
Apr 18, 2015
Recommend to a Friend
Guitar amp repair
5.0
Wonderful soldering unit! Perfect for a small shop. Very easy to change to different temperature seating. It heats up to the set range in matter of seconds, I would buy it again.
Alexander on
Apr 18, 2015
Recommend to a Friend
Can’t Beat this Little Cutter!
5.0
Most important is that this cutter is sharp! It makes perfect straight cuts and will be one of the best tools in my box.
Verified Purchase
Shuttleman on
Apr 17, 2015
Recommend to a Friend
Best Soldering Station at Reasonable Price
5.0
Right out of the box I was soldering in minutes. This is a quality tool and would recommend to anyone especial for personal hobbies. TEquipemnt is also tops for customer service. I had a question on the presets and they were very helpful.
Verified Purchase
Shuttleman on
Apr 17, 2015
Recommend to a Friend
Top is its Class
5.0
Right out of the box I was soldering in minutes. This is a quality tool and would recommend to anyone especial for personal hobbies. TEquipemnt is also tops for customer service. I had a question on the presets and they were very helpful.
Verified Purchase
Tom Howard on
Apr 17, 2015
Recommend to a Friend
Best soldering device I've ever owned.
4.0
When I complained to my brother-in-law, an electronics techie, that my soldering irons always did a poor job, he recommended the Hakko FX888D. I took his advice and am glad I did. It heats up quickly and my soldering projects are so much better.
Davorco on
Apr 16, 2015
Recommend to a Friend
Quality Control
5.0
Very reliable. Precise temperature control. Heats up quickly. Currently using two of them. One at a business and the the other for home use.
Anonymous on
Apr 16, 2015
Recommend to a Friend
Digital Soldering Station ESD Safe with FX-8801 ir
5.0
This soldering station is great! I use it almost daily; it heats quickly, is powerful, has quick & easy adjustments, and a nice stable body. Highly recommended.
Robert on
Apr 16, 2015
Recommend to a Friend
Great Product
5.0
The Hakko FX888D is definitely reliable and convenient. Heats up in about 30 seconds and gets plenty hot. The added caddy keeps the tip clean and ready for use. The wire going to the soldering iron is made with good rubber like material that won't get brittle on you.
Andyo on
Apr 16, 2015
Recommend to a Friend
Hakko FX888D-23BY
5.0
I've used Hakko in the past and recently needed a new iron. Outstanding price and quality.
Henry on
Apr 15, 2015
Recommend to a Friend
Wonderful Product!
5.0
This solder station is excellent quality and extremely easy to achieve and maintain a precise temperature. The digital display and presets makes it simple to make sure your soldering iron is set at the correct temperature for the project you are working on. Stand is very sturdy. Overall, an incredible value.
Dennis on
Apr 14, 2015
Recommend to a Friend
Excellent clean cutter
5.0
This is an excellent pair of cutters. Very comfortable spongy grips. Cuts very cleanly.
Anonymous on
Apr 14, 2015
Recommend to a Friend
Hakko FX-888D
5.0
I have been using a foreign clone of the older Hakko for a few years now and it did a good job for me. I found that it couldn't keep up with me on it's recovery and I had difficulty with some of the clone tips. I ordered the Hakko FX-888D and immediately noticed the difference. It gets up to temperature quickly and recovers well. The presets let me move up and down quickly if I need.
I have been using genuine Hakko tips with it. They tin up beautifully and are easy to keep clean.
This is a great little soldering station for just a few dollars more than an imitation.
Kevin Youngberg on
Apr 13, 2015
Recommend to a Friend
Hako Soldering Station
5.0
Hako soldering station works as advertised and works well. Seems to be very well built, well designed and does a fine job on any soldering application I can fine, from fine work to power wires. Only real downside is tips and so-forth are relatively expensive for what you get. Other than that, no complaints. Unit is at a fair price point. Recommended.
Verified Purchase
scotty h on
Apr 10, 2015
Recommend to a Friend
Great Cutter
5.0
I have several types of the same brand, Cutters, long nose pliers, etc. These are great cutters. Lightweight makes these great if you have a lot of light gauge wire cutting or through-hole wire to cut after soldering. Would recommend these to both the enthusiast or professional
Great cutter on
Apr 09, 2015
Recommend to a Friend
Works great!
5.0
Very sharp & works perfectly! I would definitely recommend!
Verified Purchase
Sonja Smith on
Apr 09, 2015
Recommend to a Friend
The Ham Radio Guy
4.0
The most awesome soldering iron I have ever owned. Stable at any temperature. Quick recovery. The only thing that might throw people off at first is using it to its fullest capabilities especially if they are the type to not read the manual. To these people I say, "Read the manual carefully and then refer to it as you tailor this awesome iron to your needs."
Beware of imitators. There is a country that is making cheap knockoffs of this soldering iron. That tells you how popular this iron is all around the world.
I bought mine here because their price was the cheapest
An engineer friend of mine first told me about this iron, and it is just as great as he described to me.
The on
Apr 09, 2015
Recommend to a Friend
mr
5.0
I have had to use old Weller stations in the past, and just discounted this type of iron as lacking. I was talked into this one, and I'm very impressed! I get more done quicker, and can trust the tip to be "spot on" at the temperature I want, without cooking the tip so every time I want it I don't have to sand and re-tin! I don't know what I would want that would do better! super tips too!
Bruce on
Apr 07, 2015
Recommend to a Friend
Very good quality soldering station
5.0
Nice product, quality looks very good.
It has a nice thermal mass and solders very well.
I would have liked a knob for setting the temperature instead of buttons.
Verified Purchase
Mircea Dan Gheorghe on
Apr 07, 2015
Recommend to a Friend
Cutter review
4.0
Worked well for the intended application
Anonymous on
Apr 06, 2015
Recommend to a Friend
Great cutters
4.0
These cutters have sill got an edge after 6 months of use a real bargain over other brands.
Verified Purchase
Robert Spoon on
Apr 04, 2015
Recommend to a Friend
Best soldering station ever
5.0
I use this in my field service kit and this is the best station I have owned so far and I've owned several Hakko stations, heats up fast and is small and portable.
Verified Purchase
Robert Spoon on
Apr 04, 2015
Recommend to a Friend
Well-made wire cutter
5.0
Great side cutter that cuts and strips wire with ease.
Verified Purchase
DCB on
Apr 03, 2015
Recommend to a Friend
Best Soldering Iron I Have Used!
5.0
It is always an enjoyable experience soldering with the Hakko FX888D-23BY. The iron heats up quickly and does not take up much space at all. The tips are very high quality and hold the temperature needed. I believe this to be the best iron for someone with experienced or novice soldering experience. The labs at my college even carry these same soldering stations for students to learn how to solder properly.
The item was well-packaged and shipping was fast. Also, the price was the lowest. Thank you!
Verified Purchase
DCB on
Apr 03, 2015
Recommend to a Friend
Great Soldering station
5.0
great product
Anonymous on
Apr 03, 2015
Recommend to a Friend
Ceo
5.0
I love it!! Very Fast Heating, with all adjustable heat control very nice. Fast delving to boot just 3 days .Cost was five below the norm, nice job gang. I have told all my friends about this too.
Tim Burgess on
Apr 01, 2015
Recommend to a Friend
Nice cutters
5.0
This is a well built pair of cutters. A must have for anyone.
DJW on
Apr 01, 2015
Recommend to a Friend
Fantastic Soldering Station
5.0
I've been soldering since I was 12 years old with all sorts of different irons and setups. I've been using a cheaper weller for the past 10 years, and the Hakko blows it away. It is built extremely well, and heats up to full temp in 30 seconds (I counted). Youll be amazed at how much better things work with a real station like this than a cheap one or a cheap iron.
Verified Purchase
Aaron Morris on
Mar 17, 2015
Recommend to a Friend
Cheap and useful
5.0
This soldering iron is perfect! Hakko always innovating and making it better.
Verified Purchase
Anonymous on
Mar 11, 2015
Recommend to a Friend
A great little tool
5.0
I have purchased cheap side cutters in the past and got what I paid for. These side cutters, on the other hand, are inexpensive and work very well for cutting the small wires I frequently work with. The cuts are precise and clean. This is a must-have tool for your toolbox.
Verified Purchase
Peter Dudash on
Mar 03, 2015
Recommend to a Friend
Digital Soldering Station ESD Safe with FX-8801 ir
5.0
Heats up quickly, accurately and maintains steady temp.
Verified Purchase
Kevin Colvin on
Feb 20, 2015
Recommend to a Friend
Good quality
5.0
Stable, fast, sturdy and cheap!
Verified Purchase
Anonymous on
Feb 09, 2015
Recommend to a Friend
Great Product
5.0
I just received my new Hakko FX-888D Soldering Station today. I have never used Hakko before but I have heard nothing but good things about them. I haven't really had a chance to use this yet, but I can tell just by looking at it and handling it, that it is well made and it also has some weight to it. There is nothing cheap about it and I think it gives Weller a good run for the money. It looks like a great product.
Verified Purchase
Edwin Karges III on
Feb 03, 2015
Recommend to a Friend
great product, authentic, good price!
5.0
This is a fantastic, basic digital-controlled soldering station that simply works well. Temps seem very stable, and the 30 second warmup time makes it completely feasible to use it stop-and-go instead of always on. After determining I wanted this model, and searching around for prices, Tequipment.net had the best price for an authentic Hakko machine. Sure, there were slightly cheaper versions available from direct-from-China vendors, but many of those are undoubtedly clones or copies, and not authentic Hakko originals. Furthermore, they would also take 3-4 weeks to arrive whereas I got mine in just a few days by free UPS Ground from Tequipment.net (I added a few spare tips to break the $100 free shipping. Anyway, I'm happy I finally made this purchase, and I expect to get many years of good use out of this.
Verified Purchase
MarkB on
Jan 27, 2015
Recommend to a Friend
Solid Tool
5.0
Good set of cutters.
Verified Purchase
Mark Zientarski on
Jan 22, 2015
Recommend to a Friend
hakko chp-170
5.0
Great cutter, great price! Fast Delivery!
Verified Purchase
Anonymous on
Jan 21, 2015
Recommend to a Friend
So far so good...
5.0
Replaced my aoyue with a 888 and it has been great so far. heats up quickly, remembers the temp settings (unlike the aoyue).
Verified Purchase
Tim Iskander on
Jan 20, 2015
Recommend to a Friend
Real Nice
5.0
What can I say, this unit is fantastic. Worth every penny.
Joseph Flammia on
Jan 19, 2015
Recommend to a Friend
Basic Soldering Iron works well
5.0
This basic soldering iron provides the approx tip temperature. The tip quality is good and the tips are reasonably priced. Buying 4 tips of various sizes for under $25 total is wonderful. For the occasional usage where proper soldering is required, this system for less than $100 is a great choice.
Verified Purchase
Mike Pollack on
Jan 04, 2015
Recommend to a Friend
Excellent Iron
4.0
This is a fantastic piece of kit. I've been using one hakko iron or another for quite awhile. They have always been great performers and this FX888D is no different. The iron heats up amazingly fast and keeps it's temperature pretty well. The iron and associated cable are quite light weight which makes soldering with this a breeze.
I however had to knock a star off my rating because the front panel controls are not at once intuitive. In fact if you jump right in and start mashing buttons you can easily mess up the temperature calibration settings. That would be fine, except that Hakko hasn't included the reset instructions in the manual you receive.
Other than that one niggle, which I only made once, this is a fantastic iron and despite that one flaw this is still one of my favorite irons. Highly recommended.
JMP on
Jan 03, 2015
Recommend to a Friend
Great tool
5.0
nice and comfortable cutter
Verified Purchase
SHIHAB KHAN on
Dec 29, 2014
Recommend to a Friend
Great Soldering Station
5.0
Absolutely love this thing. Heat's up quick, easy to use and is made very well. I was very surprised and happy with just the weight of the unit itself along with the rigid metal iron holder. Would definitely recommend this to a friend.
Jason Stewart on
Dec 12, 2014
Recommend to a Friend
Great Soldering Station
5.0
The item arrived within three days and was packaged very well. This is more of a testament to Tequipment than Hakko, but is still important as they are who you deal with.
I now have the "clown station", as my kids call it on my bench and set up for soldering wiring harnesses and some circuit boards.
Small footprint, quality burn-proof cord, balanced iron, and rapid heat up make it great for most of what your typical home or small business tech could want. It heats up amazingly fast and keeps a fairly constant temperature. I use the 2.4mm chisel tip set at 600deg F with 63/37 solder and it recovers just fine.
Download the longer instructions and look at YouTube videos on some of the features as the included manual is not real intuitive.
The tips are high quality, but I cannot comment on the longevity of the tips or iron as I have only had it for a couple of weeks.
My experience is with a Radio Shack unit and a Weller unit. The RS was ok but like using a butter knife when a scalpel should have been used. The Weller was great but gave it up after 12 years
I would recommend this unit. If you use it day in and day out, other features on higher end units might be required. However, for most of us, this is a great fit.
Dave
Verified Purchase
David Drewyor on
Dec 11, 2014
Recommend to a Friend
Hakko FX888D-23BY
4.0
Solder irons work great. Could use a place/holder to store extra solder tips.
Verified Purchase
Anonymous on
Dec 11, 2014
Recommend to a Friend
Excellent all around
5.0
As others have pointed out, this soldering station looks like a kids toy. The build quality is excellent and it works great. Heats up fast. With a wider tip this iron can put a lot of heat into a component, even a component with a good connection to a power plane. I used a Weller WTCPT for many years, and this is a much higher quality station. The base/holder appears to be solid metal with a ceramic or powercoat finish. Very nice heavy feel to it.
It comes with a 1/16" tip which is good for soldering wires and some large component pins. I'd recommend spending another few dollars and get a very fine point tip for soldering fine pitch stuff. And get another wide tip for dealing with those power planes.
The 888D is as good as the high end Metcal units I use at work. Very impressed with station at this price point.
Verified Purchase
Jamieson on
Dec 08, 2014
Recommend to a Friend
hakko chp-170
4.0
very handy and use full product for its price
Verified Purchase
Constantin Chiru on
Dec 02, 2014
Recommend to a Friend
Nice and got here fast
5.0
Super fast shipping. This is a great station. I had a Radio Shack digital station and there is no comparison. This is so much better. Looking forward to many years of service.
Verified Purchase
Chad Johnston on
Nov 16, 2014
Recommend to a Friend
Great soldering station
5.0
This is a great product from Hakko. I use this for building musical equipment with through hole components, and it is perfect. It heats up fast, came with a nice base for the iron, and has a pretty wide variety of different tips available.
Verified Purchase
Patrick on
Oct 01, 2014
Recommend to a Friend
Great Hakko Side Cutters
5.0
These are the best side cutters I've used. They are sturdy, accurate and sharp.
Verified Purchase
GDS on
Sep 10, 2014
Recommend to a Friend
Great Side Cutter for Price
5.0
Extremely high quality tool for the price - my normal cutters are 2178M Xcelite side cutters which are 4x the price, and feel almost the same. Check out the -A version which has a little safety clip that stops component leads from flying off (see http://www.hakkousa.com/AHPDirect/images/CHP-170-A.jpg), although right now the -A version doesn't seem to be a normal stock item at TE.
Verified Purchase
Colin O'Flynn on
Sep 05, 2014
Recommend to a Friend
Soldering station
5.0
Bought this as a gift for my husband. He loved it. It was even better then he had expected. Being able to change the heat setting was very helpful.
Verified Purchase
Shelli Jackson on
Aug 07, 2014
Recommend to a Friend
Hakko FX888D
5.0
Works great which was no surprise as this station is highly recommended by most.
Verified Purchase
Ryan Cole on
Aug 01, 2014
Recommend to a Friend
Excellent for high-vol hobbyists or low-vol pros.
5.0
Beware of Chinese knock-offs sold on auction sites. Part of what makes the authentic Hakko parts great is the quality of each component. It's built to last. Though this looks like it could be a fisher price "my first soldering station", the build is actually very impressive! The stand that looks plastic is actually metal with ceramic paint. Quite durable and heavy enough that it will not get knocked over. Overall, the 888D is an extremely reliable system that increases productivity.
Verified Purchase
Christopher Whitmore on
Jul 22, 2014
Recommend to a Friend
Hakko Solder station
5.0
It is a wonderful solder station so far. It holds the temperature well even when trying to solder large heat sinks.
The service was, once again, very good and I have enjoyed doing business with them.
Thanks!
Verified Purchase
Jerry Sweeney on
Jul 18, 2014
Recommend to a Friend
Hakko FX888D-23BY Digital Soldering Station
5.0
I started out by doing intensive research. I looked at stations that would meet my present and future needs; however the price of the stations were way beyond my budget. So after careful consideration, I choose the Hakko FX88D-23BY, it has met all my expectations. Rapid heating to my selected heat ranger, plenty wattage for the work I do (repairing vintage tube amps and guitars). Very sturdy base, love the presets for quick changing of heat range. I had it now for about a year and no regrets!
LastNote on
Jun 23, 2014
Recommend to a Friend
Great quality cutters
5.0
I love this cutters, they cut any lead like butter.
Verified Purchase
Douglas Gordillo on
May 14, 2014
Recommend to a Friend
Great iron
5.0
Easy to use iron with great temperature control. Heats very quickly. Comes with fitted sponge and cool tip cleaning brush for the base. I would definitely recommend this to someone that is looking to make a cost effective purchase for their tool bench.
Verified Purchase
MikeD on
May 05, 2014
Recommend to a Friend
Great unit
5.0
Aside from YouTubing and Googling, I decided to try the unit for myself. Great price and solid performer. Only issue I had was the small instruction manual that came included was small and seemed lacking in instruction. Just went online to Hakko and downloaded the pdf manual for it and was able to read it clearly on my iPad and also, seemed a bit more instruction in the pdf version. Great customer service and pricing from these folks at TE!!!!!!!!!!
Verified Purchase
Mr. C on
Apr 24, 2014
Recommend to a Friend
Review for FX888D Digital Soldering Station
5.0
Excellent product with probably the best benefit/cost characteristics in the mid-range products. FX888D has many variants of soldering tips to use all different types of soldering.
Verified Purchase
Anonymous on
Apr 03, 2014
Recommend to a Friend
One stop station for all your needs
5.0
Went with this model instead of the Weller WESD51 and haven't looked back. This station gave me more wattage which relates to be a better temperature range. It is super easy to use and maintenance is minimal and easy when necessary. I look forward to using this station for many years to come.
CT TDI on
Mar 28, 2014
Recommend to a Friend
Great size, Ergonomic Handle, Clean cut
5.0
Excellent cutter. Provides clean cuts, and the handle is designed for extended use. Great price for a well-designed and high-quality cutter.
Verified Purchase
AGK on
Mar 19, 2014
Recommend to a Friend
Wow Wow Wow
5.0
How does this unit heat up so fast? Amazing! I have been using an old Weller station for many years: I replaced the thermal switch in my iron a couple years ago, but it started acting up recently. I was in a bit of a rush this time, so rather than attempt another repair I decided to try a new station. The Hakko FX888D was within my budget and had decent reviews except from those who had difficulty with temp setting, etc. While the blue/yellow coloring is not my favorite, I am very impressed with the iron/station operation. I ordered it with several different tips although I have not tried them all yet. While I somewhat miss the "click-click" of my old weller operating, I sure enjoy the performance of this station.
Verified Purchase
Gerry L on
Mar 04, 2014
Recommend to a Friend
Great product
5.0
Great product
Jj on
Feb 21, 2014
Recommend to a Friend
These are the BEST wire cutters!
5.0
I love these side cutters. Strip wire. Cut wire. Works great.
Anonymous on
Feb 20, 2014
Recommend to a Friend
hakko soldering gun
5.0
I bought one of the older model of same, it is an amazing devise that i do all my electric hobby work as i fly electric model jets (electric turbine fan) as i needed a very reliable soldering iron for my electric jets equipment ESC ,motors and lipos battery etc .Though i had to pay a lot to be shipped to Canada but well worth it .Thanks
Ross from Oshawa Ontario
Ross on
Feb 04, 2014
Recommend to a Friend
The Best Midrange Soldering Station
5.0
A thoughtfully-designed and powerful unit. Iron heats to 371 C in about 30 seconds and slots solidly into the base. Cord is made of supple, heatproof silicone and is about 4' long, which can get a little unmanageable on the workstation. Tips are high-quality and easily available. The two-button interface is a little tough to get used to, but you'll rarely need to use it once it's configured.
Verified Purchase
Zachary Freedman on
Feb 03, 2014
Recommend to a Friend
Quality soldering iron
4.0
This is a quality soldering iron with a very solid construction and a nice exterior design (even if it looks a bit like a toy). It heats up very quickly. I personally would have enjoyed the old model, which featured a knob to regulate the temperature (this is why I give it 4/5 stars). Nevertheless, the two button system isn't too cumbersome, and the temperature display is nice and bright. The iron stand is sturdy. Having both a sponge and the steel wool is quite convenient. For the price, I'm very pleased with it overall.
NV on
Jan 28, 2014
Recommend to a Friend
Soldering Station
5.0
Best I ever owned!
Verified Purchase
Marvin Meit on
Jan 28, 2014
Recommend to a Friend
Excellent
4.0
Excellent product. Heats up fast and last forever!
CHRISTI MCFADDEN on
Jan 28, 2014
Recommend to a Friend
super good
5.0
Super awesome. Heats up fast stays hot and is super comfortable to use
stormmageddon on
Jan 17, 2014
No reviews found to display for this rating.