| Requirements |
USB cable (provided); compatible logger with appropriate cable and/or base station
U-DT-2: HOBOware 2.6 or greater |
| Compatibility |
HOBO U30 series systems, HOBO Weather Stations and Micro Stations (H21), and HOBO Energy Logger (H22) |
| Firmware upgrades |
| Operating temperature |
0° to 50°C (32° to 122°F) |
| Storage temperature |
-10° to 50°C (14° to 122°F) |
| Time accuracy |
± 1 minute per month at 25°C (77°F); see Plot A |
| Logger-to-shuttle transfer speed |
USB 64K in approximately 30 seconds
Serial: 512K in approximately 60 seconds |
| Shuttle-to-host transfer speed |
Full shuttle offload (4 MB) to host computer in 3 to 5 minutes, depending on computer |
| Data capacity (full loggers) |
4 MB (minus 64 KB for shuttle information): enough for 7 readouts of 512K loggers |
| Idle timeout |
Shuttle powers down after two minutes of idle time, except when actively communicating with HOBOware or changing logger batteries (10 minutes) |
| Ports |
RJ-12 jack for communicating with smart sensors; mini-B full speed USB port for communicating with host computer; full speed USB port for communicating with U-Series loggers and base stations; high speed serial port for communicating with serial loggers. Shuttle communicates with only one device at a time |
| Batteries |
| Main |
2 AA alkaline batteries |
| Clock backup |
1 CR1225 lithium battery (3 V) |
| Battery life |
| Main |
One year or approximately 50 complete memory fills, typical use |
| Clock backup |
10 years typical use (with main batteries installed) |
| Weight |
153 g (5.4 oz) |
| Dimensions |
11.0 x 6.9 x 2.7 cm (4.35 x 2.70 x 1.05 inches) |
| Case materials |
ABS case with urethane rubber grips, polycarbonate label |
| The CE Marking identifies this product as complying with the relevant directives in the European Union (EU) |