Requirements |
HOBOware Pro 2.2.0 or greater; USB cable (provided)
Compatible logger with appropriate cable and/or base station |
Compatibility |
All U-Series loggers, HOBO Weather Stations and Micro Stations (H21), and HOBO FlexSmart loggers (H22); not compatible with the HOBO Waterproof Shuttle (U-DTW-1) |
Firmware upgrades |
Available on the Onset website as needed to provide compatibility with future supported logger models |
Operating temperature |
0° to 50°C (32° to 122°F) |
Storage temperature |
-10° to 50°C (14° to 122°F) |
Time accuracy |
± 1 minute per month at 25°C (77°F); see Plot A |
Logger-to-shuttle transfer speed |
USB/optic |
64K in approximately 30 seconds |
Serial |
512K in approximately 60 seconds |
Shuttle-to-host transfer speed |
Full shuttle offload (4 MB) to host computer in 3 to 5 minutes, depending on computer |
Data capacity (full loggers) |
4 MB (minus 64 KB for shuttle information): enough for 504 readouts of 8K loggers, 63 readouts of 64K loggers, or 7 readouts of 512K loggers |
Idle timeout |
Shuttle powers down after two minutes of idle time, except when actively communicating with HOBOware or changing logger batteries (10 minutes) |
Ports |
RJ-12 jack for communicating with smart sensors
Mini-B full speed USB port for communicating with host computer
Full speed USB port for communicating with U-Series loggers and base stations
High speed serial port for communicating with serial loggers
Shuttle communicates with only one device at a time |
Batteries Main |
2 AA alkaline batteries |
Clock backup |
1 CR1225 lithium battery (3 V) |
Battery life Main |
One year or approximately 50 complete memory fills, typical use |
Clock backup |
10 years typical use (with main batteries installed) |
Weight |
153 g (5.4 oz) |
Dimensions |
11.0 x 6.9 x 2.7 cm (4.35 x 2.70 x 1.05 inches) |
Case materials |
ABS case with urethane rubber grips, polycarbonate label |
The CE Marking identifies this product as complying with the relevant directives in the European Union (EU) |