The Super-Vee offers you a complete system for cleaning sink, tub, and laundry drain lines through 3″ in diameter. With a variety of cables, cutters, and accessories available, you have the right combination for any clogged drain problem.

The Slide Action Chuck makes drain cleaning easier. Just pull the Grip Shield back to engage the cable - slide it forward to release. It’s safer than a spinning chuck and it automatically adjusts for different cable diameters. As a result, you get your cable into the line faster, pull it out faster, and have full control at all times.

Quick Change Cable Cartridges make it easy to switch to a different diameter cable. You just loosen three screws, pull the front of the drum off and load another cartridge. Changing takes less than a minute and turns what could be a messy job into a clean one. The drain cleaning machine holds 50 ft. of 1/4” or 5/16”, or 35 ft. of 3/8” Flexicore cables.

The Super-Vee also comes with the new Band-It splashguard to minimize excess water spray from the spinning drum.

The Super-Vee is built to clear clogged drains for a decade or more. And our Dyna-Thrust bearing system is one reason why. It helps carry the weight of the drum, significantly reducing wear on the motor shaft bearing and extending the life of the tool. Of course, the drain cables are Flexicore – with an integral wire rope center. Nobody makes cables like General. 

• SV (100010) - Basic Super-Vee (with Slide-Action Chuck, Variable Speed Motor with Rev Switch, Plastic Cartridge).
• SVF (100120) - Super-Vee with 25HE1 (25 ft. x 1/4″) cable with EL Basin head.
• SV-D-WC (10090) - Super-Vee with carrying case and 25HE1-A (25 ft. x 5/16″) cable with EL Basin head.
• SVD (100080) - Super-Vee with 25HE1-A (25 ft. x 5/16″) cable with EL Basin Head.
• SV-C-WC (100070) - Super-Vee with carrying case, 50HE1 (50 ft. x 1/4″) cable with EL Basin Head, 35HE2 (35 ft. x 3/8″) cable with Female Connector, HECS cutter set, and extra cartridge.
• SVC (100060) - Super-Vee Package with 50HE1 (50' x 1/4 inch) cable with EL Basin Head, 35HE2 (35' x 3/8 inch) cable with Female connector, HECS Cutter Set, and extra cartridge.
• SV-B-WC (100050) - Super-Vee with carrying case, 50HE1 (50 ft. x 1/4″) cable with EL Basin Head, 35HE2 (35 ft. x 3/8″) cable with Female Connector, HECS cutter set, and extra cartridge.
• SVB (100040) - Super-Vee Package w 25HE1 (25' x 1/4 inch) and 35HE2 (35' x 3/8 inch) Cables, HECS Cutter Set, and extra cartridge.
• SVA (100020) - Super-Vee Package with 25HE1 (25' x 1/4 inch) cable with EL Basin Head, 25HE2 (25' x 3/8 inch) cable with Female Connector, HECS Cutter Set, and extra cartridge.
• HS-SV (100925) - Basic Super-Vee (with Slide-Action Chuck, Variable Speed Motor with Rev Switch, Plastic Cartridge) with Handy-Stand.
• HS-SV-F (100970) - Super-Vee with 25HE1 (25' x 1/4 inch) cable with EL Basin Head and Handy-Stand.
• HS-SV-D (100960) - Super-Vee with 25HE1-A (25' x 5/16 inch) cable with EL Basin Head and Handy-Stand.
• HS-SV-C (100950) - Super-Vee with 50HE1 (50' x 1/4 inch) cable with EL Basin Head, 35HE2 (35' x 3/8 inch) cable with Female connector, HECS Cutter Set, Extra Cartridge, and Handy-Stand.
• HS-SV-B (100940) - Super-Vee with 25HE1 (25' x 1/4 inch) cable with EL Basin Head, 35HE2 (35' x 3/8 inch) cable with Female Connector, HECS Cutter Set, Extra Cartridge, and Handy-Stand.
• HS-SV-A (100930) - Super-Vee Package with 25HE1 (25' x 1/4 inch) cable with EL Basin Head, 25HE2 (25' x 3/8 inch) cable with Female Connector, HECS Cutter Set, Extra Cartridge, and Handy-Stand.
  
  Click here for a full parts breakdown of each package: Super-Vee Package Guide

With a quick movement of the Grip Shield, you release or engage the cable – without the need for a chuck, and with automatic adjustment for different cable diameters. As a result, you get your cable into the line faster, pull it out faster, and have full control at all times. Because the Slide Action Chuck is linked to the Grip Shield, handling is easy and comfortable.

1. Slide Grip Shield FORWARD to release cable.

2. Pull Cable out of drum. Slide Grip Shield BACK to grip cable.

3. Run cable into line and repeat. It’s that quick!

To switch to a different diameter cable (or even connect two 3/8″ cables together), you just loosen three screws, pull the front of the drum off the cable, and load another cartridge. Changing takes less than a minute and turns what could be a messy job into a clean one. The tough plastic cartridges are so inexpensive, you’ll probably want to store all of your cables in them.

Heavy gauge wire is coiled around 49 strand wire rope and then heat treated. This cable has unequalled strength and the right amount of flexibility. It’s so tough, it has a one year warranty against defect or breakage.

• Please see Cable Application Chart for cable compatibility HERE
• Please See Cable and Cutter Guide HERE

• AH - Arrow Head Starting Drill (Gets water flowing)
• BG - Boring Gimlet For removing loose objects
• DHBG - Down Head Boring Drill For removing loose objects (Goes down waste, not up stack)
• FAH - Flexible Spring Arrow Head Cutter Starting Drill
• 1-1/4 SCB - 1 ¼” Side Cutter Blade (2-piece set) for cutting and scraping 

All-purpose Down Head Fitting (Catalog #DHF) can be used with all standard HECS cutters.

Closet Auger Attachment (Catalog #CAA) Guides 1/4″ or 5/16″cable into bowl.

Carrying Case (Catalog #MCC) For Super-Vee, Power-Vee and Handylectric.

The rugged Handy-Stand turns General’s popular and reliable hand-held drain cleaners into practical countertop or floor machines. Ergonomically balanced for maximum stability, the lightweight portable Handy-Stand fits the Super-Vee, Power-Vee, and Handylectric, All three models are ideal for unclogging sinks, tubs, and laundry drains.

Save your arms and make drain cleaning easier with General’s new Uni-Stand! It securely supports your hand-held drain cleaner when you’re working in tight spaces like under sinks and kitchen cabinets. Just slide the adjustable clamp around the motor housing – and lock it into place for safe, solid support. Adjust the length of the Uni-Stand leg to the height desired. Then rock your machine back and forth as you feed the cable into the line.

Uni-Stand snuggly fits General’s popular Super-Vee, Power-Vee, and Handylectric hand-held drain cleaners. All three are ideal for unclogging small diameter lines in sinks, tubs, and laundry drains. Uni-Stand works with many competitive machines, too!

¼” Flexicore Cables

5/16” Flexicore Cables

3/8” Flexicore Cables