| Specifications |
| Current ranges |
20 A
200 A
2000 A
AC rms |
| Output sensitivity (AC-coupled) |
100 mV
10 mV
1 mV
1 mV per A |
| Load impedance |
100 kΩ minimum |
| Accuracy |
at +25 °C ± 1 % of range (45 Hz to 65 Hz) |
| Linearity |
10 % to 100 % of range ± 0.2 % of reading |
| Noise |
8 mV ac rms (30 A)
2 mV ac rms (300 A, 3000 A) |
| Frequency range |
10 Hz to 20 kHz (-3 dB) |
| Phase error |
< ± 1 º (45 Hz to 65 Hz)
± 10 º (at 20 kHz) |
| Position sensitivity |
with cable > 25 mm from the coupling ± 2 % of range |
| External field |
with cable > 200 mm from the head ± 1 % of range |
| Power supply |
2 x AA/MN 1500/LR6 Alkaline, 200 hours, low battery indicator |
| Temperature Coefficient |
± 0.08% of reading per°C |
| Working voltage |
see Safety standards section 600 V AC rms or DC |
| General Specifications |
| Head Circumference |
610 mm (24 in) |
| Head cable diameter |
14.3 mm (0.56 in) |
| Head bend radius |
38.1 mm (1.5 in) |
| Cable length (head to electronics) |
2 m (6.56 ft) |
| Output connection |
Molded 4 mm safety plugs (not integrated) |
| Operating temperature range |
0 °C to +70 °C (32 °F to 158 °F) (head and electronics) |
| Storage temperature range |
-40 °C to +105 °C (-40 °F to 221 °F) (head)
-20 °C to +85 °C (-4 °F to 185 °F) (electronics) |
| Operating humidity |
15 % to 85 % (non-condensing) |
| Weight |
180 g (6.34 oz) (head)
190 g (6.70 oz) (electronics) |
| Safety standards |
EN 61010-1: 2001
EN 61010-2-032: 2002
EN 61010-031: 2002
600 Vrms, Category III, Pollution Degree 2
Use of the probe on uninsulated conductors is limited to 600 V ac rms or dc and frequencies below 1 kHz. |
| EMC standards |
EN 61326: 1998 +A1, A2, & A3 |
| Dimensions |
HxWxD 116 mm x 68.5 mm x 30 mm (4.56 in x 2.69 in x 1.18 in) |