The Fieldpiece SC660 is the top of the line clamp meter with wireless functionality for the HVACR professional. Receive wireless measurements from Fieldpiece accessory heads and wireless transmitters from anywhere on the jobsite. For instance, receive an indoor delta T temperature measurement wirelessly from a Fieldpiece transmitter while you work at the condenser. Send your electrical measurements to the Job Link™ mobile app via the Fieldpiece JL2 Transmitter.
Hang your SC660 clamp meter to any metallic surface with the heavy-duty magnet and when the job is done, snap your test leads in the back case for tidy and convenient storage. See both voltage and amperage readings at the same time on the large dual display, even in low light conditions using the bright blue backlight.
Easily see your amperage readings no matter how you clamp around a wire with the swivel head AAC clamp.
Verify the order of 3-phase voltage lines with just two leads. Capture L1-L2 and L1-L3 to check that motor lines are correctly installed with Phase Rotation test.
Measure the delta T across the evaporator with dual Type K temperature ports on the SC660.
Take more accurate VAC and AAC readings on variable frequency drives with True RMS sensing technology. Measure the starting amp draw of a compressor with Inrush current mode.
Illuminate the way with a powerful LED built into the clamp jaw. Easily see your measurements with the bright blue backlight on the display, and know what parameters you are testing with the backlit illuminated dial.
Take measurements more safely with one hand using the single test lead holder. Test leads come with removable gold plated tips to connect with Fieldpiece accessory heads.
The SC660 clamp meter is built to withstand the rigors of HVACR field work with high impact plastic and a display you can read in very hot or very cold environments.
Clamp Readings in Job Link™ App
The new SC460 and SC660 wireless clamp meters team up with the Job Link system to provide even more in-depth testing, diagnostics and reports. Clamp readings are wirelessly sent to the Job Link System via the long range JL2 Transmitter. Email reports and store them in the cloud for future reference. Plus, now you can document both power and system efficiency (SEER and EER) in Job Link with the wireless clamps and wireless psychrometer.
![]()
- Live Measurements
- Trusted Diagnostics
- Inspection Checklists
- Cloud Storage
- Report Emailing
- Power and System Efficiency Calculations