Fieldpiece SC460 True RMS Wireless Clamp Meter

• Display
• 10000 count dual display
• Backlight
• 5 minute duration with auto-off Blue color
• Overrange
• (OL) or (-OL) is displayed

The SC460 is an essential clamp meter with wireless functionality for the HVACR professional. Receive wireless measurements from Fieldpiece accessory heads and wireless transmitters from anywhere on the jobsite. For instance, receive an indoor delta T temperature measurement wirelessly from a Fieldpiece transmitter while you work at the condenser. Send your electrical measurements to the Job Link™ mobile app via the Fieldpiece JL2 Transmitter. (See Wireless section for more details).

Hang your SC460 clamp meter to any metallic surface with the heavy-duty magnet. See both voltage and amperage readings at the same time on the big dual display, even in low light conditions using the bright blue backlight. Verify the order of 3-phase voltage lines with just two leads. Capture L1L2 and L1L3 to check that motor lines are correctly installed with Phase Rotation test.

Take more accurate VAC and AAC readings on variable frequency drives with True RMS sensing technology. Measure the starting amp draw of a compressor with Inrush current mode.

Illuminate the way with a powerful LED built into the clamp jaw. Easily see your measurements with the bright blue backlight on the display.

Take measurements more safely with one hand using the single test lead holder. Test leads come with removable gold plated tips to connect with Fieldpiece accessory heads. The SC460 clamp meter is built to withstand the rigors of HVACR field work with high impact plastic and a display you can read in very hot or very cold environments.

Measurements Dial

The SC460 is loaded with the measurement parameters essential for HVACR professionals. Select the parameter on the dial you want to measure with the rotating selector switch.

Buttons

	Illuminate backlight.
	Activate Inrush AAC capture mode.
	Press for 1 second to connect to compatible Fieldpiece wireless tools.
	Activate and cycle through Hold, Maximum, minimum, and real-time measurements. Press for 1 second to clear and exit. Press to log measurements in Job Link.
	Deactivate autoranging and move the decimal point as desired.
	Cycle through displayed values on applicable switch positions.

Easy to Read Display

Easily see your measurements on the big dual display. You’ll never miss a reading no matter the lighting with the bright blue backlight to illuminate the way.