Models |
IRW-2C |
IRW-3C |
IRW-4C |
NEMA Environment Type |
Type 4/12 (outdoor/indoor) |
Type 4/12 (outdoor/indoor) |
Type 4/12 (outdoor/indoor) |
Voltage Range |
Any |
Any |
Any |
Automatically Grounded |
Yes |
Yes |
Yes |
Maximum Operating Temperature |
500°F/260°C |
500°F/260°C |
500°F/260°C |
Body Material |
Anodized Aluminum |
Anodized Aluminum |
Anodized Aluminum |
Gasket Material |
Silicone |
Silicone |
Silicone |
Hardware Material |
Steel |
Steel |
Steel |
Compatible with All FLIR Cameras |
Yes |
Yes |
Yes |
PIRma-Lock Installation System |
Yes |
Yes |
Yes |
Cover and Fastener Permanently Attached |
Yes |
Yes |
Yes |
Single-hole Installation |
Yes |
Yes |
Yes |
Thumb Screw and Safety Screw Included |
Yes |
Yes |
Yes |
Broadband IR -- Short-, Mid-, & Longwave |
Yes |
Yes |
Yes |
Visible Light Spectrum |
Yes |
Yes |
Yes |
Picture-in-Picture & Fusion Image Blending |
Yes |
Yes |
Yes |
Overall Height |
85.5mm (3.36”) |
107.4mm (4.22”) |
136.5mm (5.37”) |
Overall Width |
77mm (3.03”) |
99mm (3.89”) |
127.44mm (5.01”) |
Overall Thickness |
25.5mm (1.00”) |
26.86mm (1.05”) |
29.25mm (1.15”) |
Required Actual Hole Diameter (Nominal) |
60.3mm (2-3/8”) |
88.9mm(3-1/2”) |
114.3mm (4-1/2”) |
Greenlee Punch |
76BB |
739BB |
742BB |
Recommended Max Panel Thickness |
3.2mm (1/8”) |
3.2mm (1/8”) |
3.2mm (1/8”) |
Optic Diameter |
50mm (1.97”) |
75mm (2.95”) |
95mm (3.74”) |
Viewing Aperture Diameter |
45mm (1.77”) |
69mm (2.71”) |
89mm (3.50”) |
Viewing Aperture Area |
1590mm² (2.46in²) |
3739mm² (5.79in²) |
6221mm² (9.64in²) |
Optic Maximum Temperature |
1355.6°C (2474°F) |
1355.6°C (2474°F) |
1355.6°C (2474°F) |
UL Component Recognition (UL 50V) |
Yes |
Yes |
Yes |
UL 50 / NEMA Environment Rating |
Type 4/12 |
Type 4/12 |
Type 4/12 |
Arc Flash Testing, IEC 62271-200 (KEMA) |
5kV, 63kA for 30 Cycles at 60Hz |
IP Rating, IEC 60529 (TUV) |
IP67 |
IP67 |
IP67 |
Vibration Testing, IEC 60068-2-6 (TUV) |
100 m/s^2 Vibration Withstand |
Humidity Testing, IEC 60068-2-3 (TUV) |
Extreme Humidity Withstand |
Mechanical Testing, ANSI/IEEE C37.20.2 section A3.6 (TUV) |
Impact and Load Resistant Cover |
Maximum Pullout Strength |
657 kg (1450 lbs) |
1655 kg (3650 lbs) |
1678 kg (3700 lbs) |