Dranetz DRANFLEX300MH12 Micro-Flex 3/30/300, 12 FLEX PROBE

Name: Dranetz DRANFLEX300MH12 Micro-Flex 3/30/300, 12 FLEX PROBE
Brand: Dranetz
SKU: DranetzDRANFLEX300MH12
Price: 625.00 USD
Availability: InStock

0 reviews | Model: Dranetz DRANFLEX300MH12

Compare

Micro-Flex 3/30/300, 12 FLEX PROBE

Micro-Flex 3/30/300, 12 FLEX PROBE
Current sensor provides IP 50 protection, measuring amplifier IP 40
Reliable handling even with safety gloves – the sensor can be opened and the measuring range can be selected with one-hand operation
High levels of safety for the operator, measuring category 1000V @CAT III, 600V @CAT IV and unlimited overload capacity, designed for continuous operation
Broad range of applications, 3 measuring ranges (3, 30 and 300 A AC) and a large bandwidth of 20 Hz to 100 kHz for harmonic analysis
Accurate measurement, even with low current values, thanks to large dynamic range and high sensor sensitivity
Minimal influence due to conductor position or disturbance fields
Easy to use in tight spaces thanks to small sensor cross-section of just 6 mm

View Product Details

List Price: $625.00

In Stock:

View Payment Options

Recommended for you

Accessories

Choose a Category

Line Splitters

for the Dranetz DRANFLEX300MH12

HT Instruments LineSplitter Conductor Splitter Without Cable Stripping

Catalog: LineSplitter

(11)

In Stock!

Add to Cart

Micro-Flex 3/30/300, 12 FLEX PROBE

Flexible Probes

Flexible Probes are available in three lengths 24 inches, 36 inches, and 48 inch lengths and available in two maximum ranges of 3000 A RMS and 6000 A RMS. Each probe can be powered by battery or AC adapter and multiple probes can be powered by a single AC adapter. Flex probes are available as separate probes, or as four phase packages, which include power supply. All Flexible Probes listed here are compatible with Dranetz portable instruments: PowerXplorer, PowerGuide, PowerVisa, PowerGuia, Energy Platform, PP4300, 658 with CA4300 adapter; and Dranetz permanent instruments: Encore 61000 with 61MAC module, Signature System 5513. Adapters are available for use with other instrument configurations; contact us for details. Dranetz recommends only Dranetz-brand probes be used with Dranetz power quality equipment

Accuracy at 50 to 60Hz
Amplitude	10%-100% of full scale of probe range
30 / 300 A Range	±1% of reading ± 0.1A
3000 A Range	±1% of reading ± 1A
Note: Overall measurement accuracy is the probe accuracy plus the instrument accuracy. Refer to the applicable Dranetz-BMI instrument User's guide for measurement accuracy for the instrument you are using.
Phase (45 - 65Hz)	±1 degree
Rated Voltage	1000 V Maximum
Output Signal
Ranges 30 / 300 or 3000A	1.5VRMS
Frequency Range	10 to 10kHz (-1dB)
Maximum Conductor Size
	24 inch probe length conductor(s) up to 8 inch diameter
	36 inch probe length conductor(s) up to 11 inch diameter
	48 inch probe length conductor(s) up to 17 inch diameter
Environmental
Operating Temperature	-20°C to + 65°C 0-90% Relative Humidity (non-condensing)
Storage Temperature	-40°C to + 75°C
Altitude	2000m (6560ft) maximum)
	Installation Category III, Pollution Degree 2
Degree of Protection Probe IP65, (not certified by UL), Enclosure IP40
Power Supply	2 x AA MN1500 LR6 Alkaline Batteries, (2000 hours of continuous operation). OR External power supply (3V/100mA)
Safety Standards
	EN 61010-1:2001
	EN 61010-031:2002
	EN 61010-2-032:2002
	30V maximum between Output and Earth
EMC EN 61326-2-2	2006
Rated for continuous use.
Enclosure Material	ARNITE T06-200SNF, UL94 V0
Probe Material	Alcryn 2070 NC, LATI LATENE 7H2W V0