Pressure type |
Gauge pressure, absolute pressure |
Sealed gauge pressure *1 |
Gauge pressure |
Rated pressure range (MPa) |
0 to 0.1 |
0 to 0.2 |
0 to 0.7 |
0 to 1 |
0 to 2 |
-0.1 to 0 |
-0.1 to 0.1 |
-0.1 to 0.7 |
-0.1 to 1 |
-0.1 to 2 |
0 to 3.5 |
0 to 5 |
0 to 10 |
0 to 20 |
0 to 40 |
0 to 50 |
0 to 60 |
Expanded analog output range (MPa) |
0 to 0.11 |
0 to 0.22 |
0 to 0.77 |
0 to 1.1 |
0 to 2.2 |
-0.1 to 0.01 |
-0.1 to 0.12 |
-0.1 to 0.78 |
-0.1 to 1.11 |
-0.1 to 2.21 |
0 to 3.85 |
0 to 5.5 |
0 to 11 |
0 to 22 |
0 to 44 |
0 to 55 |
0 to 66 |
Max. pressure range (MPa) |
0.6 |
0.6 |
3 |
3 |
3 |
0.6 |
0.6 |
3 |
3 |
3 |
10 |
20 |
50 |
80 |
120 |
120 |
120 |
Burst pressure (MPa) |
0.6 |
0.6 |
3 |
3 |
3 |
0.6 |
0.6 |
3 |
3 |
3 |
15 |
30 |
75 |
120 |
160 |
160 |
160 |
Measured materials |
Liquid, gas, oil (lnappropriate to corrosion environment for stainless steel 316L) |
Power supply |
• Voltage output type: 8-36VDC (ripple P-P: max. 10%)
• Current output type: 11-36VDC (ripple P-P: max. 10%) |
Permissible voltage range |
90 to 110% of rated voltage |
Current consumption |
• Voltage output type: max. 20mA
• Current output type: max. 30mA |
Response time |
Max. 1ms |
Protection circuit |
Reverse polarity protection circuit |
Output type |
• Voltage output type: 1-5VDC
• Current output type: DC4-20mA |
Compensation temperature |
-10 to 80°C |
0 to 80°C |
Accuracy |
Max. ±0.5% F.S. (including linearity, hysteresis, reproducibility) |
Linearity |
Max. ±0.2% F.S. |
Hysteresis |
Max. ±0.2% F.S. |
Temperature Zero Shift |
Max. ±0.1% F.S./10°C (standard), max. ±0.25% F.S./10 °C (max.) |
Temperature Span Shift |
Max. ±0.1% F.S./10°C (standard), max. ±0.25% F.S./10 °C (max.) |
Temperature characteristics |
— |
-25 to 100°C: max. ±1.5% F.S.
-40 to 125°C: max. ±2.5% F.S. |
Load resistance |
Current output type: max. 700Ω (supplying 24VDC) |
Dielectric strength |
500VAC 50/60Hz for 1 minute |
Insulation resistance |
Over 100MΩ (at 500VDC megger) |
Environment |
Ambient temperature |
Voltage output |
• Head type, DIN43650-A connector type, M12 connector type, DT04-3P connector type : -40 to 125 °C , storage: -40 to 125 °C
• Cable type: -40 to 80 °C , storage: -40 to 80 °C |
Current output |
• Head type, DIN43650-A connector type, M12 connector type, DT04-3P connector type : -40 to 85 °C , storage: -40 to 125 °C
• Cable type: -40 to 80 °C , storage: -40 to 80 °C |
Ambient humidity |
35 to 85%RH |
Fluid temperature |
-40 to 125 °C |
Vibration |
10g, 20 to 2,000Hz |
20g, 20 to 2,000Hz |
Shock |
100g/6ms |
500g/1ms |
Tightening torque |
Max. 10N.m |
Protection structure |
• Head type, M12 connector type, DT04-3P connector type, cable type: IP67 (IEC standard)
• DIN43650-A connector type: IP65 (IEC standard) |
Material |
Stainless steel 316L (head part of head type: aluminium diecasting), connector: Polybutylene terephthalate G30, water-proof rubber: silicon |
Connection |
• Voltage output type: +, -, Vout
• Current output type: +, - |
Weight*2 |
• Head type: approx. 330g (approx. 250g)
• DIN43650-A connector type, M12 connector type, DT04-3P connector type: approx. 130g (approx. 50g)
• Cable type: approx. 200g (approx. 120g) |