| Power supply |
100-240VAC~50/60Hz |
| Allowable voltage range |
90 to 110% of rated voltage |
| Power consumption |
Max. 5VA |
| Display method |
7-segment (red) LED method |
| Character size (W×H) |
3.8×7.6mm |
6.0×10.0mm |
8.0×14.2mm |
| Input type |
RTD |
DPt100Ω (Allowable line resistance max.5Ω per a wire) |
| TC |
K(CA), J(IC) |
K(CA), J(IC), R(PR) |
| Display accuracy ※1 |
RTD |
●At room temperature (23ºC ± 5ºC): (PV ± 0.5% or ±1ºC, select the higher one) ± 1-digit
●Out of room temperature range: (PV± 0.5% or ±2ºC, select the higher one)± 1-digit |
| TC |
| Control output |
Relay |
OUT1: 250VAC=5A, 30VDC=5A, 1c, OUT2: 250VAC~2A, 30VDC=2A, 1c※2 |
| SSR |
Max. 12VDC=±2V 20mA |
| Current |
DC4-20mA (resistive load max. 500Ω) |
| Alarm/Sub/Dual setting output |
- |
250VAC~2A 1c |
- |
250VAC~2A 1a |
- |
250VAC~2A 1c |
| Sampling period |
100ms |
| Control method |
ON/OFF, Proportional control |
| Hysteresis |
F.S. 0.5% |
F.S. 0.2 to 3% variable |
| Proportional band |
F.S. 3% |
F.S. 1 to 10% variable |
| Proportional cycle |
20 sec |
| RESET range |
F.S. -3 to 3% variable |
| Relay life cycle |
Mechanical |
Over 5,000,000 times |
| Electrical |
OUT1: Over 100,000 times, OUT2: Over 200,000 times |
| Dielectric strength |
2,000VAC 50/60Hz for 1min (between input terminal and power terminal) |
| Vibration |
0.75mm amplitude at frequency of 10 to 55Hz (for 1 min) in each X, Y, Z direction for 2 hours |
| Insulation resistance |
Over 100MΩ (at 500VDC megger) |
| Noise immunity |
Square-wave noise by noise simulator (pulse width 1㎲) ±2kV R-phase and S-phase |
| Memory retention |
Approx. 10 years (when using non-volatile semiconductor memory type) |
| Environment |
Ambient temperature |
-10 to 50℃, Storage: -20 to 60℃ |
| Ambient humidity |
35 to 85% RH, Storage: 35 to 85% RH |
| Weight※3 |
Approx. 135g
(approx. 95g) |
Approx. 239g
(approx. 176g) |
Approx. 246g
(approx. 180g) |
Approx. 310g
(approx. 222g) |