| Model |
SPB-060-48 |
SPB-120-12 |
SPB-120-24 |
SPB-120-48 |
SPB-180-24 |
SPB-180-48 |
SPB-240-12 |
SPB-240-24 |
SPB-240-48 |
| 62.4W |
96W |
120W |
180W |
182.4W |
240W |
| Input condition |
Voltage |
100-240VAC~ (permissible voltage: 85-264VAC~/120-370VDC) |
| Frequency |
50/60Hz |
| Efficiency※1 (typical) |
100VAC~ |
85% |
82% |
85% |
85% |
89% |
89% |
87% |
89% |
89% |
| 240VAC~ |
87% |
85% |
88% |
88% |
92% |
92% |
90% |
92% |
92% |
| Power factor※1 |
--- |
Min. 0.9 |
Min. 0.9 |
Min. 0.9 |
| Max. current consumption※1 |
1.6A |
1.9A |
3.0 A |
3.8A |
| Current consumption※1 (typical) |
10VAC~ |
1.19A |
1.19A |
1.49A |
1.43A |
2.03A |
2.04A |
2.76A |
2.71A |
2.73A |
| 240VAC~ |
0.64A |
0.52A |
0.61A |
0.61A |
0.83A |
0.84A |
1.14A |
1.12A |
1.13A |
| Power factor correction circuit |
--- |
Built-in |
Built-in |
Built-in |
| Output characteristics |
Voltage |
48VDC |
12VDC |
24VDC |
48VDC |
24VDC |
48VDC |
12VDC |
24VDC |
48VDC |
| Current |
1.3A |
8A |
5A |
2.5A |
7.5A |
3.8A |
20A |
10A |
5A |
| Voltage adjustment range※2 |
Max. ±5% |
Max. ±5% |
Max. ±5% |
Max. ±5% |
| Input variation※3 |
Max. ±0.5% |
Max. ±0.5% |
Max. ±0.5% |
Max. ±0.5% |
| Load variation |
Max. ±1% |
Max. ±1% |
Max1±1% |
Max. ±1% |
| Ripple& Ripple noise※1,※4 |
Max. ±1% |
Max. ±1% |
Max. ±1% |
Max. ±1.5% |
Max. ±1% |
| Start-up time※1 (typical) |
100VAC~ |
1200ms |
1200ms |
1200ms |
1200ms |
87ms |
75ms |
75ms |
87ms |
75ms |
| 240VAC~ |
400ms |
400ms |
400ms |
400ms |
56ms |
45ms |
45ms |
56ms |
45ms |
| Hold time※1 (typical) |
100VAC~ |
15ms |
98ms |
75ms |
87ms |
36ms |
25ms |
33ms |
36ms |
25ms |
| 240VAC~ |
108ms |
97ms |
43ms |
86ms |
36ms |
25ms |
33ms |
36ms |
25ms |
| Protection |
Inrush current protection (typical) |
100VAC~ |
10A |
9A |
11A |
10A |
8A |
8A |
8A |
8A |
8A |
| 240VAC~ |
37A |
37A |
36A |
37A |
25A |
26A |
22A |
25A |
26A |
| Over-current protection※4 |
105 to 160% |
105 to 160% |
105 to 160% |
105 to 160% |
| Over-voltage protection |
--- |
16.0V ±10% |
30.0V ±10% |
58.0V ±10% |
30.0V ±10% |
58.0V ±10% |
16.0V ±10% |
30.0V ±10% |
58.0V ±10% |
| Output low-voltage indicate |
43.0V ±10% |
9.6V ±10% |
20.0V ±10% |
43.0V ±10% |
20.0V ±10% |
43.0V ±10% |
10.0V ±10% |
20.0V ±10% |
43.0V ±10% |
| Indicator |
Output indicator: green LED, output low-voltage indicator: red LED |
| Insulation resistance |
Over 100MΩ (at 500VDC megger between all input terminals and output terminals) |
| Dielectric strength |
3,000VAC 50/60Hz for 1 min (between all input terminals and output terminals |
| 1,500VAC 50/60Hz for 1 min (between all input terminals and F.G.) |
| Vibration |
0.75mm amplitude at frequency 10 to 55Hz (for 1 min) in each X, Y, Z direction for 2 hour |
| Shock |
300m/s² (approx. 30G) in each X, Y, Z direction for 3 times |
| EMS |
Conforms to EN61000-6-2 |
| EMI |
Conforms to EN61000-6-4 |
| Safety standards |
EN60950, EN50178 |
| Environmet |
Ambient temp.※ |
-10 to 50℃, storage: -25 to 65℃ (surrounding air temp.: max. 40℃) |
| Ambient humi. |
25 to 85%RH, storage: 25 to 90%RH |
| Input cable |
AWG21 to 19 (material: Cu) |
AWG21 to 19 (material: Cu) |
AWG21 to 19 (material: Cu) |
AWG18 to 16 (material: Cu) |
| Terminal tightening torque |
0.7 to 0.9N.m |
0.7 to 0.9N.m |
0.7 to 0.9N.m |
0.7 to 0.9N.m |
| Protection |
IP20 (IEC standard) |
| Approval |
|
| Weight※6 |
Approx. 347g (approx. 274g) |
Approx. 570g (approx. 466g) |
Approx. 609g (approx. 505g) |
Approx. 866g (approx. 736g) |
※1: It is for 100% load.
※2: The output voltage adjuster (V.ADJ) should be used within voltage adjustment range.
※3: It is for the rated input voltage 100-240VAC (85-264VAC), and 100% load.
※4: It is for the rated input voltage 100-240VAC. ※5: Refer to ' Output Derating Curve by Ambient Temperature'.
※6: The weight includes packaging. The weight in parenthesis is for unit only.
※Environment resistance is rated at no freezing or condensation. |