Autonics PRD Series DC 2-wire type General Specifications |
Model |
PRDT12-4O
PRDT12-4C
PRDT12-4O-V
PRDT12-4C-V
PRDLT12-4O
PRDLT12-4C
PRDLT12-4O-V
PRDLT12-4C-V
PRDWT12-4O
PRDWT12-4C
PRDWT12-4O-I
PRDWT12-4C-I
PRDWT12-4O-IV
PRDWT12-4C-IV |
PRDT12-8O
PRDT12-8C
PRDT12-8O-V
PRDT12-8C-V
PRDLT12-8O
PRDLT12-8C
PRDLT12-8O-V
PRDLT12-8C-V
PRDWT12-8O
PRDWT12-8C
PRDWT12-8O-I
PRDWT12-8C-I
PRDWT12-8O-IV
PRDWT12-8C-IV |
PRDT18-7O
PRDT18-7C
PRDT18-7O-V
PRDT18-7C-V
PRDLT18-7O
PRDLT18-7C
PRDLT18-7O-V
PRDLT18-7C-V
PRDWT18-7O
PRDWT18-7C
PRDWT18-7O-I
PRDWT18-7C-I
PRDWT18-7O-IV
PRDWT18-7C-IV
PRDWLT18-7O-IV
PRDWLT18-7C-IV |
PRDT18-14O
PRDT18-14C
PRDT18-14O-V
PRDT18-14C-V
PRDLT18-14O
PRDLT18-14C
PRDLT18-14O-V
PRDLT18-14C-V
PRDWT18-14O
PRDWT18-14C
PRDWT18-14O-I
PRDWT18-14C-I
PRDWT18-14O-IV
PRDWT18-14C-IV
PRDWLT18-14O-IV
PRDWLT18-14C-IV |
PRDT30-15O
PRDT30-15C
PRDT30-15O-V
PRDT30-15C-V
PRDLT30-15O
PRDLT30-15C
PRDLT30-15O-V
PRDLT30-15C-V
PRDWT30-15O
PRDWT30-15C
PRDWT30-15O-I
PRDWT30-15C-I
PRDWT30-15O-IV
PRDWT30-15C-IV |
PRDT30-25O
PRDT30-25C
PRDT30-25O-V
PRDT30-25C-V
PRDLT30-25O
PRDLT30-25C
PRDLT30-25O-V
PRDLT30-25C-V
PRDWT30-25O
PRDWT30-25C
PRDWT30-25O-I
PRDWT30-25C-I
PRDWT30-25O-IV
PRDWT30-25C-IV |
Sensing distance |
4mm |
8mm |
7mm |
14mm |
15mm |
25mm |
Hysteresis |
Max. 10% of sensing distance |
Standard sensing
target |
12×12×1mm(Iron) |
25×25×1mm (Iron) |
20×20×1mm (Iron) |
40×40×1mm (Iron) |
45×45×1mm (Iron) |
75×75×1mm (Iron) |
Sensing distance |
0 to 2.8mm |
0 to 5.6mm |
0 to 4.9mm |
0 to 9.8mm |
0 to 10.5mm |
0 to 17.5mm |
Power supply
(Operating voltage) |
12-24VDC (10-30VDC) |
Leakage current |
Max. 0.6mA |
Response frequency*1 |
450HZ |
400Hz |
250Hz |
200Hz |
100Hz |
Residual voltage*2 |
Max. 3.5V(for non-polarity type, max. 5V) |
Affection by Temp. |
Max. ±10% for sensing distance at ambient temperature 20°C |
Control output |
2 to 100mA |
Insulation resistance |
Min. 50MΩ(at 500VDC megger) |
Dielectric strength |
1500VAC 50/60Hz for 1minute |
Vibration |
1mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 2 hours |
Shock |
500m/s²(approx. 50G) X, Y, Z directions for 3 times |
Indicator |
Operation indicator(red LED) |
Environment |
Ambient temperature |
-25 to 70°C, Storage: -30 to 80°C |
Ambient
humidity |
35 to 95%RH, Storage: 35 to 95%RH |
Protection circuit |
Surge protection circuit, Reverse polarity protection circuit, Overcurrent protection circuit |
Material |
Case/Nut: Nickel plated Brass
Washer: Nickel plated Iron
Sensing surface: Heat-resistant ABS
Standard cable(Black): Polyvinyl chloride(PVC)
Oil resistant cable(Gray): Oil resistant Polyvinyl chloride(PVC) |
Cable |
ø4, 2-wire, 2m |
ø5, 2-wire, 2m |
(For cable type, 300mm, M12 connector), (AWG22, Core diameter: 0.08mm, Number of cores: 60, Insulator diameter: ø1.25) |
Approval |
CE |
Protection |
IP67(IEC Standard) |
Unit weight |
PRDT: Approx. 74g
PRDLT: Approx. 94g
PRDWT: Approx. 44g |
PRDT: Approx. 72g
PRDLT: Approx. 92g
PRDWT: Approx. 42g |
PRDT: Approx. 115g
PRDLT: Approx. 145g
PRDWT: Approx. 80g
PRDWLT: Approx. 42g |
PRDT: Approx. 110g
PRDLT: Approx. 140g
PRDWT: Approx. 75g
PRDWLT: Approx. 105g |
PRDT: Approx. 175g
PRDLT: Approx. 215g
PRDWT: Approx. 140g |
PRDT: Approx. 180g
PRDLT: Approx. 220g
PRDWT: Approx. 145g |
*1: The response frequency is the average value. The standard sensing target is used and the width is set as 2 times of the standard |
sensing target, 1/2 of the sensing distance for the distance. |
*2: Before using non-polarity type, check the condition of connected device because residual voltage is 5V. |
*The '' of model name is for power type. 'D' is 12-24VDC, 'X' is non-polarity 12-24VDC. |
*The last 'V' of model name is for the model with oil-resistance reinforced cable. |
*Environment resistance is rated at no freezing or condensation. |