Autonics PRDCM Series DC 2-wire type General Specifications |
Model*1 |
PRDCMT08
-2DO
PRDCMT08
-2DC
PRDCMT08
-2DO-I
PRDCMT08
-2DC-I |
PRDCMT08
-4DO
PRDCMT08
-4DC
PRDCMT08
-4DO-I
PRDCMT08
-4DC-I |
PRDCMT12
-4DO
PRDCMT12
-4DC
PRDCMT12
-4DO-I
PRDCMT12
-4DC-I
PRDCMLT12
-4DO
PRDCMLT12
-4DC
PRDCMLT12
-4DO-I
PRDCMLT12
-4DC-I |
PRDCMT18
-7DO
PRDCMT18
-7DC
PRDCMT18
-7DO-I
PRDCMT18
-7DC-I
PRDCMLT18
-7DO
PRDCMLT18
-7DC
PRDCMLT18
-7DO-I
PRDCMLT18
-7DC-I |
PRDCMT18
-7DO
PRDCMT18
-7DC
PRDCMT18
-7DO-I
PRDCMT18
-7DC-I
PRDCMLT18
-7DO
PRDCMLT18
-7DC
PRDCMLT18
-7DO-I
PRDCMLT18
-7DC-I |
PRDCMT18
-14DO
PRDCMT18
-14DC
PRDCMT18
-14DO-I
PRDCMT18
-14DC-I
PRDCMLT18
-14DO
PRDCMLT18
-14DC
PRDCMLT18
-14DO-I
PRDCMLT18
-14DC-I |
PRDCMT30
-15DO
PRDCMT30
-15DC
PRDCMT30
-15DO-I
PRDCMT30
-15DC-I
PRDCMLT30
-15DO
PRDCMLT30
-15DC
PRDCMLT30
-15DO-I
PRDCMLT30
-15DC-I |
PRDCMT30
-25DO
PRDCMT30
-25DC
PRDCMT30
-25DO-I
PRDCMT30
-25DC-I
PRDCMLT30
-25DO
PRDCMLT30
-25DC
PRDCMLT30
-25DO-I
PRDCMLT30
-25DC-I |
Sensing distance |
2mm |
4mm |
8mm |
7mm |
14mm |
15mm |
25mm |
Hysteresis |
Max. 10% of sensing distance |
Standard sensing
target |
8×8×1mm
(Iron) |
12×12×1mm
(Iron) |
25×25×1mm
(Iron) |
20×20×1mm
(Iron) |
40×40×1mm
(Iron) |
45×45×1mm
(Iron) |
75×75×1mm
(Iron) |
Setting distance |
0 to 1.4mm |
0 to 2.8mm |
0 to 5.6mm |
0 to 5.6mm |
0 to 9.8mm |
0 to 10.5mm |
0 to 17.5mm |
Power supply
(Operating voltage) |
12-24VDC (10-30VDC) |
Leakage current |
Max. 0.6mA |
Response
frequency2 |
600Hz |
500Hz |
500Hz |
400Hz |
250Hz |
200Hz |
100Hz |
Residual voltage |
Max. 3.5V |
Affection by Temp. |
Max. ±10% for sensing distance at ambient temperature 20°C |
Control output |
2 to 100mA |
Insulation
resistance |
Min. 50MΩ(at 500VDC megger) |
Dielectric strength |
1500VAC 50/60Hz for 1minute |
Vibration |
1mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 2 hours |
Shock |
500m/s²(approx. 50G) in each of X, Y, Z directions for 3 times |
Indicator |
Operation indicator(red LED) |
Enviro-
nment |
Ambient temperature |
-25 to 70°C, storage: -30 to 80°C |
Ambient humidity |
35 to 95%RH, storage: 35 to 95%RH |
Protection circuit |
Surge protection circuit, Reverse polarity protection circuit, Over current protection circuit |
Material |
Case/Nut: Nickel plated Brass
Washer: Nickel plated Iron
Sensing surface: Heat-resistant ABS |
Approval |
CE |
Protection |
IP67(IEC Standard) |
Unit weight*3 |
Existing |
- |
PRDCMT: Approx. 26g
PRDCMLT: Approx. 36g |
PRDCMT: Approx. 48g
PRDCMLT: Approx. 66g |
PRDCMT: Approx. 142g
PRDCMLT: Approx. 182g |
Upgrade |
Approx. 15.5g |
Approx. 15g |
Approx. 23.5g |
Approx. 22g |
Approx. 46.5g |
Approx. 42.5g |
Approx. 160g |
Approx. 165g |
*1: PRDCMT series is going to upgrade performance(4-side LED) and structure(comprehensive existing case and rear cap type). |
*2: The response frequency is the average value. The standard sensing target is used and the width is set as
2 times of the standard sensing target, 1/2 of the sensing distance for the distance. |
*3: Upgrade unit weight is only for PRDCMT( Upgrade ). Refer to the existing unit weight for the other models or existing products. |
*Environment resistance is rated at no freezing or condensation. |