| Autonics MP5S/MP5Y/MP5W Series Specifications |
| Display method |
7 Segment LED(Zero Blanking method) |
| Character size |
W4×H8mm |
W7×H14mm |
| Display range |
-19999 to 99999 |
| Power |
AC Voltage |
100-240VAC 50/60Hz |
| AC/DC Voltage |
24VAC 50/60Hz, 24-48VDC |
| Power Consumption |
AC Voltage |
Max. 7.5VA
(100-240VAC 50/60Hz) |
Max. 9.0VA
(100-240VAC 50/60Hz) |
Max. 10.0VA
(100-240VAC 50/60Hz) |
| AC/DC Voltage |
Max. 6.0VA (24VAC 50/60Hz), Max. 4.5W (24-48VDC) |
Max. 7.0VA (24VAC 50/60Hz), Max. 6.2W (24-48VDC) |
Max. 7.5VA (24VAC 50/60Hz), Max. 7.0W (24-48VDC) |
| Permissible voltage range |
90 to 110% of rated voltage |
| External sensor power |
12VDC±10%, 80mA |
| Sub power supply |
------ |
24VDC 30mA |
| Input frequency |
Solid state input: max. 50kHz (pulse width: min. 10µs)
Contact input: max. 45Hz (pulse width: min. 11ms) |
| Input method |
[Voltage input] High: 4.5-24VDC, Low: 0-1.0VDC, Input impedance: 2.4kΩ
[No-voltage input] Short-circuit impedance: max. 80Ω, Residual voltage: min. 1V, Open-circuit impedance: min. 100kΩ |
| Measurement range |
Mode F1, F2, F7, F8, F9, F10 : 0.0005Hz to 50kHz
Mode F3, F4, F5, F6 : 0.01 to max. of each time range
Mode F11, F12, F13, F16 : 0 to 99999
Mode F14, F15 : -19999 to 99999 |
| Measurement accuracy(23±5°C) |
Mode F1, F2, F7, F8, F9, F10: F.S.±0.05%rdg±1digit
Mode F3, F4, F5, F6: F.S.±0.01%rdg±1digit |
| Display cycle |
OFF (for F2, F16), 0.05, 0.5, 1, 2, 4, 8 sec (same as update output cycle) |
| Operation mode |
Frequency/Revolutions/Speed (F1), Passing speed (F2), Cycle (F3), Passing time (F4), Time interval (F5), Time differential (F6), Absolute ratio (F7), Error ratio (F8), Density (F9), Error (F10), Length measurement 1 (F11), Interval (F12), Accumulation (F13), Addition/Subtraction-individual input (F14), Addition/Subtraction-phase difference input (F15), Length measurement 2 (F16) |
| Pre-scale function |
Direct input method (0.0001×10-9 to 9.9999×109) |
| Hysteresis |
0 to 9999*1 |
| Output |
Main |
Relay(triple) |
------ |
250VAC 3A resistive load |
| Relay(Quintuple) |
------ |
250VAC 3A ressistive load |
NPN/PNP open
collector quintuple |
Max. 30VDC 30mA |
| Sub |
BCD Dynamic |
Max. 30VDC 30mA |
| Analog |
DC4-20mA/DC0-20mA max. load 500Ω |
| Communication |
RS485 communication output (Modbus RTU method) |
| Memory retention |
Non-volatile memory (number of inputs: 100,000 operations) |
| Insulation resistance |
Min. 100M? (at 500VDC megger) |
| Dielectric strength |
2,000VAC 60Hz for 1min. |
| Noise resistance |
±2kV the square wave noise (pulse width: 1µs) by the noise simulator |
| Vibration |
Mechanical |
0.75mm amplitude at frequency of 10 to 55Hz in each X, Y, Z direction for 1 hour |
| Malfunction |
0.5mm amplitude at frequency of 10 to 55Hz in each X, Y, Z direction for 10 minutes |
| Shock |
Mechanical |
300m/s² (approx. 30G) in each X, Y, Z direction for 3 times |
| Malfunction |
100m/s² (approx. 30G) in each X, Y, Z direction for 3 times |
| Relay Life cycle |
Mechanical |
------ |
Min. 10,000,000 operations |
| Electrical |
------ |
Min. 100,000 operations (250VAC 3A ressistive load) |
| Environment |
Ambient Temp. |
-10 to 50°C, storage: -20 to 60°C |
| Ambient Humi. |
35 to 85%RH, storage: 35 to 85%RH |
| Weight |
Approx. 191g (approx. 132g) |
Approx. 230g (approx. 140g) |
Approx. 334g (approx. 210g) |
*1: Setting range will vary depending on the decimal point.
*2: The weight includes packaging. The weight in parentheses is for unit only.
*: Environment resistance is rated at no freezing or condensation. |