| General Specifications |
| Model |
1-stage setting |
FS4-1P2 |
FS4-1P4 |
--- |
| Indicator |
--- |
--- |
FS5-I4 |
| Display digit |
4-digit |
5-digit |
| Character size (W×H) |
3.8×7.6mm |
4×8mm |
| Power supply |
24VAC~50/60Hz, 24-48VDCЗ |
100-240VAC~ 50/60Hz |
| Permissible voltage range |
90 to 110% of rated voltage |
| Power consumption |
Max. 3.5VA (24VAC~ 50/60Hz),
Max. 2.3W (24-48VDCЗ) |
Max. 4.6VA
(100-240VAC~ 50/60Hz) |
Max. 3.8VA
(100-240VAC~50/60Hz) |
| Max. counting speed for COUNT IN |
Selectable 1cps/30cps/2kcps/5kcps (DIP switch) |
| Return time |
Max. 500ms |
| Min. signal width |
RESET: approx. 20ms |
| Input method |
Selectable voltage input (PNP) method or no-voltage input (NPN) method
[Voltage input (PNP) method]-input impedance: max. 10.8kΩ, [H]: 5-30VDCЗ, [L]: 0-2VDC
[No-voltage input (NPN) method]-short-circuit impedance: max. 470Ω, short-circuit residual voltage: max. 1VDC, open-circuit impedance: min. 100kΩ |
| One-shot output time |
0.05 to 5 sec |
| Control output |
Contact |
Type |
Instantaneous SPST (1a) |
--- |
| Capacity |
250VAC~ 3A, 30VDCЗ 3A resistive load |
| Relay life cycle |
Mechanical |
Min. 5,000,000 operations |
| Electrical |
Min. 100,000 operations (250VAC 3A resistive load) |
| Insulation resistance |
Over 100MΩ (at 500VDC megger) |
| External power supply |
Max. 12VDCЗ ±10% 50mA |
| Memory retention |
Approx. 10 years (non-volatile memory) |
| Dielectric strength |
2,000VAC 50/60Hz for 1 min (between all terminals and case) |
| Noise immunity |
AC voltage |
±2kV the square wave noise (pulse width 1μs) by noise simulator |
| AC/DC voltage |
±500V the square wave noise (pulse width 1μs) by noise simulator |
| Vibration |
Mechanical |
0.75mm amplitude at frequency 10 to 55Hz (for 1 min) in each X, Y, Z direction for 1 hour |
| Malfunction |
0.5mm amplitude at frequency 10 to 55Hz (for 1 min) in each X, Y, Z direction for 10 minutes |
| Shock |
Mechanical |
300m/s2 (approx. 30G) in each X, Y, Z direction for 3 times |
| Malfunction |
100m/s2 (approx. 10G) in each X, Y, Z direction for 3 times |
| Environment |
Ambient temp. |
-10 to 55℃, storage: -25 to 65℃ |
| Ambient humi. |
35 to 85%RH, storage: 35 to 85%RH |
| Protection structure |
IP20 (front part, IEC standard) |
| Approval |
CE |
| Weight※1 |
Approx. 130g (approx. 90g) |
Approx. 120g (approx. 80g) |
※1: The weight includes packaging. The weight in parenthesis is for unit only.
※Environment resistance is rated at no freezing or condensation. |