Autonics ENHP-100-2-T-5 - Portable Incremental type with Handle

Name: Autonics ENHP-100-2-T-5 - Portable Incremental type with Handle
Brand: Autonics
SKU: AutonicsENHP-100-2-T-5
Price: 669.00 USD
Availability: InStock

0 reviews | Model: Autonics ENHP-100-2-T-5

Autonics ENHP Series Portable Incremental type with Handle

Compare

Pulse Generator, Hand Held, 100 PPR, 3 Feed Rates 5 Axis, Clickstopper Position Normal Low, Totemple Output, 5VDC

100 PPR, 3 Feed Rates 5 Axis, Clickstopper Position Normal Low, Totemple Output
Power supply: 5VDC
Suitable for manual pulse input type such as numerically controlled or milling machinery
Emergency stop switch, enable switch are available
Rotary switch for 6 Position, 4 Position
Application: Industrial tooling machinery

View Product Details

Your Price: $669.00

Sign-in for EDU Pricing!

In Stock:

Free shipping over $99 - Code: FREESHIP
Please note, FREE SHIPPING is only available on items that can ship via standard ground shipping and is only valid within the Contiguous United States. Any items that must ship via freight or to any destination outside of the Contiguous United States will be excluded. - USE CODE FREESHIP at checkout

Valid on Web Price Only!
View Payment Options

Request Quote

Items in This Series



Product	Autonics ENHP-100-2-T-5 Pulse Generator, Hand Held, 100 PPR, 3 Feed Rates 5 Axis, Clicksto ...	Autonics ENHP-100-1-L-5 Pulse Generator, Hand Held, 100 PPR, 3 Feed Rates 5 Axis, Quadratu ...	Autonics ENHP-100-2-L-5 Pulse Generator, Hand Held, 100 PPR, 3 Feed Rates 5 Axis, Quadratu ...	Autonics ENHP-100-1-T-5 Pulse Generator, Hand Held, 100 PPR, 3 Feed Rates 5 Axis, Clicksto ...
Price
In Stock
Compare	Add to compare	Add to compare	Add to compare	Add to compare

Recommended for you

Autonics ENHP-100-2-T-5

Suitable for manual pulse input type such as numerically controlled or milling machinery
Emergency stop switch, enable switch are available
Rotary switch for 6 Position, 4 Position

Pulse Generator, Hand Held, 100 PPR, 3 Feed Rates 5 Axis, Clickstopper Position Normal Low, Totemple Output, 5VDC

The ENHP series portable manual handle type incremental rotary encoders are ideal for manual pulse input applications including NC machinery and milling machines. The encoders can be easily connected/disconnected with the D-sub connector.

ENHP Series Ordering Information

General Specifications
Item			Portable incremental type of rotary encoder with handle
Resolution(P/R)			100
Electrical specification	Output phase		A, B phase(Line driver output A, A _ , B, B _ phase)
	Phase difference of output		Phase difference between A and B : T/4 ± T/8 (T=1cycle of A phase)
	Rotary switch output		BCD Code output Axis select switch(OFF, X, Y, Z, A, B) Rate select switch(R1, R2, R3, R4)
	Control output	Totem pole output	Low - Load current : Max. 30mA, Residual voltage : Max. 0.4VDC High - Load current : Max. 10mA, Output voltage(Power voltage 5VDC): Min.(Power voltage-2.0)VDC Output voltage(Power voltage 12-24VDC): Min.(Power voltage-3.0)VDC
		Line driver output	Low - Load current : Max. 20mA, Residual voltage : Max. 0.5VDC High - Load current : Max. -20mA, Output voltage : Min. 2.5VDC
	Response time (Rise/Fall)	Totem pole output	Max. 1㎲	Measuring condition - Cable length : 1m,I sink = 20mA
		Line driver output	Max. 0.5㎲
	Power supply		5VDC ±5%(Ripple P-P : Max. 5%), 12-24VDC ±5%(Ripple P-P : Max. 5%)
	Current consumption		Max. 40mA(disconnection of the load), Line driver output : Max. 50mA(disconnection of the load)
	Max. Response frequency		10kHz
	Insulation resistance		Min. 100MΩ(at 500VDC megger between all terminals and case)
	Dielectric strength		750VAC 50/60Hz for 1 minute(Between all terminals and case)
	Connection		25Pin D-SUB of connector type
Mechanical specification		Starting torque	Max. 1kgf·cm(0.098N·m)
		Shaft loading	Radial : 2kgf, Thrust : 1kgf
		Max. allowable revolution*1	Max. 200rpm(Normal), 600rpm(Peak)
Vibration			1.5mm amplitude or 300m/s2 at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 2 hours
Shock			Approx. Max. 50G
Environment		Ambient temperature	-10 to 70℃, storage : -25 to 85℃
		Ambient humidity	35 to 85%RH, storage : 35 to 90%RH
Cable			ø5, 18-wire, Length : 8m, Spring code cable (AWG28, Core diameter : 0.08mm, Number of cores : 18, Insulator out diameter : ø0.7)
Protection*2			IP67(IEC standards) for Box
Unit weight			Approx. 730g
1: Make sure that. Max response revolution should be lower than or equal to max. allowable revolution when selecting the resolution. [Max. response revolution(rpm)= Max. response frequency / Resolution x 60sec] 2: It is protection for the rear case and the wiring part. *Environment resistance is rated at no freezing or condensation.