Autonics BRE10M-TDTL Cylindrical Long Sensing Type, Through Beam, 10M Round Brass

Name: Autonics BRE10M-TDTL Cylindrical Long Sensing Type, Through Beam, 10M Round Brass
Brand: Autonics
SKU: AutonicsBRE10M-TDTL
Price: 84.95 USD
Availability: InStock

0 reviews | Model: Autonics BRE10M-TDTL

Compare

Sensor, Photo, Through Beam, 10M Round Brass, Light On, NPN Output, 12-24 VDC

Realizes long installation distance (10m)
High ambient illumination environment (Max. 20,000㏓)
Easy to mount by One Push type
Built-in reverse power polarity and short-circuit (over current) protection circuit
Sensitivity adjustment and TEST function by control cable
Protection structure IP66 (IEC standard)

View Product Details

List Price: $84.95

In Stock:

View Payment Options

Recommended for you

Autonics BRE10M-TDTL

Easy to mount by One Push type
Built-in reverse power polarity and short-circuit (over current) protection circuit
Sensitivity adjustment and TEST function by control cable
Protection structure IP66 (IEC standard)

Sensor, Photo, Through Beam, 10M Round Brass, Light On, NPN Output, 12-24 VDC

The BR series Ø18 mm cylindrical photoelectric sensors feature a high-speed response time under 1 ms and excellent noise immunity with digital signal processing. The sensors are ideal for installation in limited spaces, with narrow-beam reflective type sensing. Connector-type sensors are also available, offering easier maintenance and wiring work.

Model: BRE10M-TDTL Specifications
Sensing type	Through-beam type
Sensing distance	10m
Sensing target	Opaque material of min. Ø10mm
Response time	Max. 1ms
Power supply	12-24VDC ±10% (Ripple P-P: Max. 10%)
Current consumption	Emitter: Max. 20mA, Receiver: Max. 16mA
Light source	Infrared LED (850nm)
Sensitivity adjustment	Sensitivity adjustment by connecting external resistance on control cable (3kΩ to 10kΩ variable)
TEST function	Connecting output pin of control output cable to GND to enter into TEST mode.[Power indicator (green) of emitter flashes]
Operation mode	Light ON
Control output	NPN open collector Load voltage: Max. 24VDC Load current: Max. 100mA Residual voltage: Max. 1.6V
Protection circuit	Reverse polarity protection circuit, Output short-circuit protection circuit
Indicator	Operation indicator: red LED, Power indicator: green LED
Insulation resistance	Min. 20MΩ (at 500VDC megger)
Noise resistance	±240V the square wave noise (pulse width: 1) by the noise simulator
Dielectric strength	1000VAC 50/60Hz for 1 minute
Vibration	0.5mm amplitude at frequency of 10 to 150Hz (for 1 min.) in each X, Y, Z direction for 2 hours
Shock	500m/s² (approx. 50G) in each X, Y, Z direction for 3 times
Environment_Ambient illumination	Sunlight: Max. 20,000㏓ (Receiver illumination)
Environment_Ambient temperature	-25 to 50°C, storage: -25 to 80°C
Environment_Ambient humidity	35 to 85%RH, storage: 35 to 85%RH
Protection structure	IP66 (IEC standard)
Material	Case: polycarbonate LED CAP: polycarbonate Lens, Lens cover: polymethyl methacrylate
Cable	Ø3mm, 3-wire, Length: 5m (AWG 22, Core diameter: 0.08mm, Number of cores: 40, Insulator out diameter: Ø1.0mm
Approval	CE
Unit Weight	Approx. 130g