Autonics BPS3M-TDT-P PhotoelectricSensor, Through Beam, Dark On

Name: Autonics BPS3M-TDT-P PhotoelectricSensor, Through Beam, Dark On
Brand: Autonics
SKU: AutonicsBPS3M-TDT-P
Price: 91.00 USD
Availability: InStock

0 reviews | Model: Autonics BPS3M-TDT-P

Autonics Slim Photoelectric Sensor for Long Sensing Distance, Through Beam

Compare

Sensor, Photo, Through Beam, Miniature, Dark On, PNP Output, 12-24 VDC

Sensor, Photo, Through Beam, Miniature, Dark On, PNP Output, 12-24 VDC
Easy to mount by Flat type
Realization of 3m sensing distance as small size
Protection structure IP67(IEC standard)

View Product Details

Your Price: $91.00

Sign-in for EDU Pricing!

In Stock:

Free shipping over $99 - Code: FREESHIP
Please note, FREE SHIPPING is only available on items that can ship via standard ground shipping and is only valid within the Contiguous United States. Any items that must ship via freight or to any destination outside of the Contiguous United States will be excluded. - USE CODE FREESHIP at checkout

Valid on Web Price Only!
View Payment Options

Request Quote

Items in This Series



Product	Autonics BPS3M-TDT-P Sensor, Photo, Through Beam, Miniature, Dark On, PNP Output, 12-24 VD ...	Autonics BPS3M-TDT Sensor, Photo, Through Beam, Miniature, Dark On, NPN Output, 12-24 VDC	Autonics BPS3M-TDTL Sensor, Photo, Through Beam, Miniature, Light On, NPN Output, 12-24 VD ...
Price
In Stock
Compare	Add to compare	Add to compare	Add to compare

Recommended for you

Autonics BPS3M-TDT-P

Easy to mount by Flat type
Realization of 3m sensing distance as small size
Protection structure IP67(IEC standard)

Sensor, Photo, Through Beam, Miniature, Dark On, PNP Output, 12-24 VDC

The BPS series compact photoelectric sensors are easy to install with a compact, thin and flat design. The through-beam type sensors have long sensing distances of up to 3 m and a protection rating of IP67.

Autonics BPS Series General Specifications
Model	NPN open collector output	BPS3M-TDT	BPS3M-TDTL
	PNP open collector output	BPS3M-TDT-P	BPS3M-TDTL-P
Sensing type		Through-beam
Sensing distance		3m
Sensing target		Opaque materials of Min. ø5mm
Response time		Max. 1ms
Power supply		12-24VDC ±10%(Ripple P-P : Max. 10%)
Current consumption		Max. 20mA
Light source		Infrared LED(850nm)
Operation mode		Dark ON	Light ON
Control output		NPN open collector output Load voltage: Max. 30VDC Load current: Max. 100mA Residual voltage - NPN: Max. 1V, PNP: Max. 2.5V
Protection circuit		Reverse polarity protection, Output short-circuit protection
Indicator		Emitter : Power indicator(red LED), Receiver : Operation indicator(red LED)
Insulation resistance		Min. 20MΩ(at 500VDC megger)
Noise resistance		±240V the square wave noise(pulse width:1μs) by the noise simulator
Dielectric strength		1,000VAC 50/60Hz for 1minute
Vibration		1.5mm amplitude or 300m/s² at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 2 hours
Shock		500m/s²(approx. 50G) in each of X, Y, Z directions for 3 times
Environment	Ambient illumination	Sunlight : Max. 11,000lx, Incandescent lamp : Max. 3,000lx(Receiver illumination)
	Ambient temperature	-25 to 65°C, storage : -25 to 70°C
	Ambient humidity	35 to 85%RH, storage : 35 to 90%RH
Protection		IP67(IEC standard)
Material		Case: PC
Cable		ø3, 3-wire, Length : 2m(Emitter of through-beam type : ø3, 2-wire, Length : 2m) (AWG24, Core diameter : 0.08mm, Number of cores : 40, Insulator out diameter : ø1)
Approval		CE
Unit weight		Approx. 66g
*The temperature or humidity mentioned in Environment indicates a non freezing or condensation environment.