Autonics BL13-TDT Sensor, Liquid Level, Through Beam, Light and Dark On

Name: Autonics BL13-TDT Sensor, Liquid Level, Through Beam, Light and Dark On
Brand: Autonics
SKU: AutonicsBL13-TDT
Price: 162.00 USD
Availability: InStock

0 reviews | Model: Autonics BL13-TDT

Compare

Sensor, Liquid level, Through Beam, Light and Dark On, NPN Output, 12-24 VDC

Sensor, Liquid Level, Through Beam, Light and Dark On, NPN Output, 12-24 VDC
Detects liquid in a transparent/semitransparent pipe diameter Ø6 to 13mm, thickness 1mm
Compact size: W23×H14×L13mm
Built-in reverse polarity and output short-circuit protection circuits
IP64 of protection structure (IEC standards)

View Product Details

Your Price: $162.00

Sign-in for EDU Pricing!

In Stock:

Free shipping over $99 - Code: FREESHIP
Please note, FREE SHIPPING is only available on items that can ship via standard ground shipping and is only valid within the Contiguous United States. Any items that must ship via freight or to any destination outside of the Contiguous United States will be excluded. - USE CODE FREESHIP at checkout

Valid on Web Price Only!
View Payment Options

Request Quote

Items in This Series



Product	Autonics BL13-TDT Sensor, Liquid level, Through Beam, Light and Dark On, NPN Output, 12-24 ...	Autonics BL13-TDT-P Sensor, Liquid level, Through Beam, Light and Dark On, PNP Output, 12- ...
Price
In Stock
Compare	Add to compare	Add to compare

Recommended for you

Autonics BL13-TDT

Detects liquid in a transparent/semitransparent pipe diameter Ø6 to 13mm, thickness 1mm
Compact size: W23×H14×L13mm
Selectable Light ON/Dark ON operation mode by operation mode switching button
Built-in reverse polarity and output short-circuit protection circuits
IP64 of protection structure (IEC standards)

Sensor, Liquid level, Through Beam, Light and Dark On, NPN Output, 12-24 VDC

The BL series photoelectric liquid level sensors can detect the presence or absence of liquid in transparent pipes measuring 6 to 13 mm in diameter and less than 1 mm thick. Users can easily select between Light ON and Dark ON operation using the operation mode switch. With a compact design and easy installation, the BL series sensors are ideal solutions for non-contact detection of liquid in transparent pipes.

General Specifications
Model	NPN output	BL13-TDT
	PNP output	BL13-TDT-P
Sensing type		Through-beam
Applicable pipe		ø6 to 13mm(thickness: 1mm) transparent pipe(FEP(fl uoroplastic) or with equivalent transparency)
Standard sensing target		Liquid in a pipe*1
Response time		Max. 2ms
Power supply		12-24VDC ±10%( Ripple P-P : Max. 10%)
Current consumption		Max. 30mA
Light source		Infrared LED(950nm)
Operation mode		Light ON/Dark ON switching by operation mode switching button
Control output		NPN or PNP open collector output Load voltage : Max. 30VDC Load current : Max. 100mA Residual voltage : Max. 1V
Protection circuit		Reverse polarity protection circuit, output short-circuit protection circuit
Indicator		Operation indicator: Red LED, Operation mode indicator: Green LED
Insulation resistance		Min. 20MΩ(at 500VDC megger)
Noise resistance		±240V the square wave noise(pulse width: 1㎲ ) by the noise simulator
Dielectric strength		1,000VAC 50/60Hz for 1 minute(between all terminals and case)
Vibration		1.5mm amplitude or 300m/s2 at frequency of 10 to 55Hz in each of X, Y, Z directions for 2 hours
Shock		500m/s²(approx. 50G) in each of X, Y, Z directions for 3 times
Environment	Ambient illumination	Sunlight /Incandescent lamp : Max. 3,000 ㏓ for each (Receiver illumination)
	Ambient temperature	10 to 55 °C , storage: -25 to 65 °C
	Protection	IP64(IEC standards)
Material		Case: PC
Cable		ø2.5, 3-wire, Length : 1m (AWG28, Core diameter : 0.08mm, Number of cores : 19, Insulator diameter: ø0.9)
Accessory		Binding band 2EA, Anti-slip tube 2EA
Unit weight		Approx. 30g
1: This may not detect the liquid with low transparent, with high viscosity, or with floating matters. The temperature or humidity mentioned in Environment indicates a non freezing or condensation environment.