| Power supply |
10-30VDC ą10% (When connecting BD-C Series communication converter, 12-30VDC) |
| Power consumption |
Max. 2800mW (30VDC) |
| Control input |
No-voltage input |
| Judgment output |
NPN or PNP open collector output (Load current: Max. 100mA) |
| Alarm output |
NPN or PNP open collector output (Load current: Max. 100mA) |
| Residual voltage |
NPN: Max. 1.5V, PNP: Max. 2.5V |
| Protection circuit |
Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit |
| Response time |
0.33, 0.5, 1, 2, 5 ms (5-step adjustment) |
| Min. display unit |
BD-030: 1㎛, BD-065: 2㎛, BD-100: 4㎛ |
| Display method |
Dual display by 6-digit, 11-segment LED |
| Display range |
±99.999mm to ±99mm (4-step adjustment) |
| Display cycle |
Approx. 100ms |
| Insulation resistance |
Over 20MΩ (at 500VDC megger) |
| Noise immunity |
Square shaped noise by noise simulator (pulse width: 1㎲, cycle: 10ms) ą500V |
| Dielectric strength |
1,000VAC 50/60Hz for 1 minute |
| Vibration |
1.5mm amplitude at frequency of 10 to 55Hz (for 1 min) in each X, Y, Z direction for 2 hours |
| Shock |
300m/s˛ (approx. 30G) in each X, Y, Z direction for 3 times |
| Environment_Ambient temperature |
-10 to 50℃, storage: -15 to 60℃ |
| Environment_Ambient humidity |
Under 85%RH, storage: under 85%RH |
| Protection structure |
IP40 (IEC Standards) |
| Material |
Case: Polycarbonate, Cover: Polycarbonate, Cable: Polyvinyl chloride |
| Connection method |
Connector type |
| Sensor head compatibility |
BD Series sensor head: 1 |
| Accessories |
Mounting bracket, Side connector |
| Weight |
Approx. 228g (approx. 126g) |