| General Specifications |
| Model |
ATE8-4[] |
ATE8-4[]D |
ATE8-4[]E |
| Function |
Power ON Delay Timer |
| Control time setting range ※ 1 |
0.1 sec to 24 hour |
| Power supply |
100-240VAC 50/60Hz, 24-240VDC |
| Return time |
Max. 200ms |
| Time operation |
Power ON Start |
| Return time |
Max. 200ms |
| Time operation |
Power ON Start |
| Control output |
Contact type |
Time-limit SPDT (1c)+
Instantaneous SPST (1a) |
Time-limit DPDT (2c) |
Time-limit SPDT (1c)+
Instantaneous SPDT (1c) |
| |
Contact capacity |
250VAC ~ 3A, 30VDC = 3A resistive load |
| Relay life cycle |
Mechanical |
Min. 5,000,000 operations |
| |
Electrical |
Min. 100,000 operations (250VAC 3A resistive load) |
| Repeat error |
Max. ±0.3% ±0.01 sec |
| Set error |
Max. ±5% ±0.05 sec |
| Voltage error |
Max. ±0.5% ±0.01 sec |
| Temp. error |
Max. ±2% ±0.01 sec |
| Insulation resistance |
Over 100MΩ (at 500VDC megger) |
| Dielectric strength |
2,000VAC 50/60Hz for 1min |
| Noise immunity |
±2kV the square wave noise (pulse width 1 μ s) by noise simulator |
| Vibration |
Mechanical |
0.75mm amplitude at frequency 10 to 55Hz (for 1min) in each X, Y, Z direction for 1 hour |
| Malfunction |
0.5mm amplitude at frequency 10 to 55Hz (for 1 min) in each X, Y, Z direction for 10 min |
| Shock |
Mechanical |
300m/s 2 (approx. 30G) in each X, Y, Z direction for 3 times |
| Malfunction |
100m/s 2 (approx. 10G) in each X, Y, Z direction for 3 times |
| Environment |
Ambient temp |
-10 to 55 °C , storage: -25 to 65 °C |
| Ambient humid. |
35 to 85%RH, storage: 35 to 85%RH |
| Protection structure |
IP40 (front part, IEC standard) |
| Weight ※ 2 |
Approx. 122.2g (approx. 75g) |
※ 1: Refer to time specifi cations for control time setting range by model.
※ 2: The weight includes packaging. The weight in parenthesis is for unit only.
※ Environment resistance is rated at no freezing or condensation. |