| General Specifications |
| Model |
ATE x S,M,H |
ATE1 x S,M,H |
ATE2 x S,M,H |
| Function |
Power ON Delay |
| Control time setting range |
sec.(1, 3, 6, 10, 30, 60), min.(3, 6, 10, 30, 60), hour(3, 6, 12 ,24) |
| Power supply |
110/220VAC 50/60Hz |
110VAC, 220VAC 50/60Hz, 12VDC, 24VDC |
| Allowable Voltage Range |
90 to 110% of rated voltage |
| Power Consumption |
Max. 10VA (110/220VAC 50/60Hz), Max. 2W (24VDC, 12VDC) |
| Reset time |
Max. 200ms |
| Time operation |
Power ON Start Type |
| Control output |
Contact type |
Time-limit SPDT (1c)+
Instantaneous SPST (1a) |
Time-limit DPDT (2c) |
Time-limit SPDT (1c)+
Instantaneous SPDT (1c) |
| Contact capacity |
250VAC ~ 3A, 30VDC = 3A resistive load |
| Relay life cycle |
Mechanical |
Min. 10,000,000 operations |
| Electrical |
Min. 100,000 operations (250VAC 3A resistive load) |
| Repeat error |
Max. ±0.3% |
| Set error |
Max. ±5% ±0.05 sec |
| Voltage error |
Max. ±0.5% |
| Temp. error |
Max. ±2% |
| Insulation resistance |
Over 100MΩ (at 500VDC megger) |
| Dielectric strength |
2,000VAC 50/60Hz for 1min |
| Noise immunity |
±2kV the square wave noise (pulse width 1 μ s) by noise simulator |
| Vibration |
Mechanical |
0.75mm amplitude at frequency 10 to 55Hz (for 1min) in each X, Y, Z direction for 1 hour |
| Malfunction |
0.5mm amplitude at frequency 10 to 55Hz (for 1 min) in each X, Y, Z direction for 10 min |
| Shock |
Mechanical |
300m/s 2 (approx. 30G) in each X, Y, Z direction for 3 times |
| Malfunction |
100m/s 2 (approx. 10G) in each X, Y, Z direction for 3 times |
| Environment |
Ambient temp |
-10 to 55 °C , storage: -25 to 65 °C |
| Ambient humid. |
35 to 85%RH |
| Weight |
Approx. 75g |
| ※ Environment resistance is rated at no freezing or condensation. |