| Rated load current 2/3A General Specifications |
| Power supply |
24VDC ±10% |
| Rated load voltage & current*1 |
250VAC 3A, 30VDC 3A |
250VAC 2A, 30VDC 2A
(2A/1-point, 8A/1COM) |
| Current consumption |
PA type |
Max. 10.5mA *2 |
Max. 10.5mA*2/Max. 15.5mA*3 |
| TN type |
Max. 8.5mA*2 |
Max. 8.5mA*2/Max. 13.5mA*3 |
| Output type |
1a contact relay output |
| Applicable relay |
PA: PA1a-24V [MATSUSHITA (Panasonic)], TN: NYP24W-K [TAKAMISAWA (Fujitsu)] |
| No. of relay points |
1-point |
4-point |
16-point |
32-point (8-point/1COM) |
| No. of connector pins |
- |
20-pin |
40-pin |
| Indicator |
Operation indicator: Blue LED |
Power indicator: Red LED,
Operation and disconnection indicator: Blue LED |
| Applicable wire |
AWG22-16 (0.30 to 1.25mm*2) |
| Insulation resistance |
Min. 1,000MΩ (at 500VDC megger) |
| Dielectric strength |
Between coil-contact |
2,000VAC 50/60Hz for 1 minute |
| Between same contacts |
1,000VAC 50/60Hz for 1 minute*4 |
| Vibration |
Mechanical |
0.75mm amplitude at frequency of 10 to 55 Hz (for 1 min) in each X, Y, Z direction for 2 hours |
| Malfunction |
0.75mm amplitude at frequency of 10 to 55 Hz (for 1 min) in each X, Y, Z direction for 10 minute |
| Shock |
Mechanical |
500m/s*2 (approx. 50G) in each X, Y, Z direction for 3 times |
| Malfunction |
147m/s*2 (approx. 15G) in each X, Y, Z direction for 3 times |
| Environment |
Ambient temperature |
-15 to 55?, storage: -25 to 65? |
| Ambient humidity |
35 to 85%RH, storage: 35 to 85%RH |
| Material |
CASE & BASE: Polyamide 6, TERMINAL PIN: Brass |
CASE & BASE: Modified Polyphenylene Oxide, TERMINAL PIN: Brass |
CASE: MPPO, BASE: Polyamide 66 (G25%) TERMINAL PIN: Brass |
| Tightening torque |
5.1 to 6.1kgf*.cm (0.5 to 0.6 N*.m) |
| Accessories*5 |
- |
Jumper bar: 2 (Model: JB-7.62-04) |
Jumper bar: 2 (Model: JB-7.62-08) |
- |
| Weight*7 |
PA type |
Approx. 314.5g (approx. 21.5g)*8 |
Approx. 104g (approx. 68g) |
Approx. 307g (approx. 224g) |
Approx. 438g (approx. 345g) |
| TN type |
Approx. 324.5g (approx. 22.2g)*8 |
Approx. 107g (approx. 71g) |
Approx. 318g (approx. 235g) |
Approx. 463g (approx. 370g) |
*1: Relay contact capacity for resistive load.
*2: The current consumption including LED current by one relay.
*3: The current consumption including power LED at '*1'.
*4: R6 type (OMRON relay) is 3,000VAC. TN type (Fujitsu relay) is 750VAC.
*5: ABS-H32_ _-NN(PN) does not supply jumper bars.
*6: Except 30VDC of rated load voltage for UL Listed .
*7: The weight includes packaging. The weight in parentheses is for unit only.
*8: The weight of 1-point relays is per 10 units with packing and the weight of parenthesis is per 1.
*Environment resistance is rated at no freezing or condensation. |