Measurement Range: 5 to 1000A Output Signal: 10mV/A & 1mV/A Accuracy: 1% of Reading Crest Factor: 9 Phase Shift @ 50/60Hz: 0.7° Frequency Range: 10 to 20,000Hz (intentionally limited for optimum performance) Residual Noise: 500mA Working Voltage: 1000Vrms max. Influence of Frequency: Add 1% to the reference Influence of Adjacent Conductor: 2% Influence of Conductor Position in Jaw: 4% Output: Two 4mm safety banana jacks, standard 3/4" (19mm) spacing Battery: 9V Alkaline Low Battery: Green LED Off when ³ 7V Overload Indication: Red LED indicates input greater than selected range Battery Life: 150 hours typical (continuous use) Sensor Dimensions: 48" Electronic Module Dimensions: 4.9 x 2.5 x 1.1" (124 x 64 x 28mm) Cable Length: 6.5ft (2m) Drop Test: 1.0m on 38mm of oak or concrete. Test according to IEC1010 Vibration: Test per IEC 68-2-6, Frequency Range: 10Hz to 55Hz, Amplitude: 0.15mm Mechanical Shock: 100G, Test per IEC 68-2-32 Case Protection: Sensor: IP65 per IEC529; Electronic Module: IP40 Operating Temperature: 14 to 131°F (-10°C to +55°C) Storage Temperature: -40 to 158°F (40°C to +70°C) Influence of Temperature: Sensor: -10°C to 100°C: 0.5% per 10°C; Module: -10°C to 55°C: 0.5% per 10°C Operative Relative Humidity: 10 - 30°C 85 ±5% RH without condensation; 40 - 50°C 45 ±5% RH (without condensation) Altitude: Operating: 0 to 2000m; non-operating: 0 to 12000m |