• A 14-inch flexible sensor capable of clamping around a 4.7-inch cable or bundle
• Maximum Conductor: Size 4" (10cm)
• Current Range:  3 A, 30 A, 300 A, and 3000 Arms AC
• Measurement Range:  0.5 to 3000 A
• Output Signal:  1 V/A, 100 mV/A, 10 mV/A, and 1 mV/A
• Accuracy:  ±(1% + 40mV)
• Phase at 50Hz/60Hz:  ≤1.5°

Provide a welcomed solution when accessing electrical conductors in tight places or clamping onto cable bundles

The Miniflex® MA114 is an AC current sensor composed of a flexible Rogowski coil and an electronic module. The sensor permits measurements on conductors where standard clamp-on probes cannot be used. It can be installed in tight spaces, around cable bundles, bus bars, or even wrapped around irregular shapes.

The Miniflex® has an mV output proportional to the current measured for direct readings on DMMs, loggers, oscilloscopes, and power or harmonic meters. The length of the flexible sensor is 14" (35cm) and clamp around the conductor up to 4” (10cm). Four ranges are available, 3A/3V, 30A/3V, 300AV3V, and 3000A/3V. The model MA114 is powered by AA batteries or by a standard mains adapter (5Vdc, 100mA) by a type B micro-USB connector