Satellite Signal Level Meter

 
Applied Instruments XR-S2XACM-01 - Satellite Signal Level Meter Module for XR-3
  • Minimum Frequency Range: 950 MHz
  • Maximum Frequency Range: 2150 MHz
  • Satellite Capability: DirecTV, Other
  • Measurements: Bit Error Rate, dB, IRD (voltage), LNB (current), LNB Frequency Deviation Estimate, Other, Signal Level
  • Signal Level Units of Measure: dBµV, dBm, dBmV
  • Max RF Signal Range: -25 dB

Your Price: $445.00

Sign-in for EDU Pricing!

In Stock:
  • View Payment Options
Applied XR-TS2-01 - Satellite Meter Module
  • HTS/Schedule B Number: 9030.90.6600
  • ECCN Number: 5B991

Your Price: $450.00

Sign-in for EDU Pricing!

In Stock:
Applied Instruments DBS Kit - XR-3W+ Satellite Meter, Turbo S2 Satellite Module, Case
  • Minimum Frequency Range: 250 MHz
  • Maximum Frequency Range: 2150 MHz
  • Satellite Capability: DirecTV, Other
  • Measurements: dB, LNB Frequency Deviation Estimate, Other, Signal Level
  • Signal Level Units of Measure: dBµV, dBm, dBmV
  • Max RF Signal Range: -15 dB

Your Price: $1,320.00

Sign-in for EDU Pricing!

In Stock:
Leader HD TAB 9 PLUS - ATSC for USA Standard Signal Level Meter with Spectrum Analyzer
  • Frequency Range Max: 1250 MHz (1250000000 HzWhat's This?)
  • Frequency Resolution: 25 kHz (25000 HzWhat's This?)
  • Minimum Frequency Range: 950 MHz
  • Maximum Frequency Range: 2610 MHz
  • Battery Run Time: 6 HR
  • Graphical Display Type: TFT LCD

Your Price: $6,273.00

In Stock:
  • Free shipping over $99 - Code: FREESHIP
  • View Payment Options
Applied Instruments VSAT Kit - XR-3W+ Satellite Meter, VSAT w/Nit Module, Case
  • Minimum Frequency Range: 950 MHz
  • Maximum Frequency Range: 2150 MHz
  • Satellite Capability: Other
  • Measurements: dB, IRD (voltage), LNB (current), LNB Frequency Deviation Estimate, Signal Level
  • Signal Level Units of Measure: dBµV, dBm, dBmV
  • Max RF Signal Range: -25 dB

Your Price: $1,370.00

Sign-in for EDU Pricing!

In Stock:
Applied XR-S2XACM-02 - Satellite Signal Level Meter Module (VSAT, Broadcast, TVRO, International DTH) for XR-3
  • Minimum Frequency Range: 950 MHz
  • Maximum Frequency Range: 2150 MHz
  • Field Replacement F Connectors: Yes
  • Satellite Capability: DirecTV, Other
  • Measurements: Bit Error Rate, dB, IRD (voltage), LNB (current), LNB Frequency Deviation Estimate, Other, Signal Level
  • Signal Level Units of Measure: dBµV, dBm, dBmV

Your Price: $500.00

Sign-in for EDU Pricing!

In Stock:
null
null
null
null
null
null

Recommended for you

Satellite Signal Level Meter

Satellite Signal Level Meters are used to test the quality of TV satellite signals. They are also called TV Meters, Field Strength Meters, and Satellite Finders.  These devices are primarily intended for installers and service technicians. Signal level is measured over a specified frequency range and expressed typically as dBmV or dBm.
 
Signal level meters would be connected to the cable from the antenna or cable provider. The antenna can be located and adjusted based on the signal level and other problems diagnosed.
 
Key Selection Criteria
  • Signal type (CATV, VHF, UHF,DBS,MMDS,SMATV,DVB, DSS, ISDB-Tb, etc.)
  • Frequency
  • Spectrum Display. Some bench units will provide this feature or you can separately purchase a full spectrum analyzer from TEquipment.
What does MER, BER and C/N stand for and why are they important?
These terms are borrowed from the telecom industry for signal level.
  • MER is the Modulation Error Ratio
  • BER is the Bit Error Ratio
  • C/N Is the carrier to noise ratio or signal to noise ratio (SNR)
These are helpful to a an installer or service technician determine problems such as loose or corroded wires, too long a cable run, or problems at the ground block, multi switches, head end or tap.
X