How Can We Help You?
Questions?

Toll Free: (877) 571-7901

Local: (732) 728-2590

[email protected]

P6000 Series Thickness Gauges

Buying Guide

DeFelsko's rugged and fully electronic coating thickness gauges use magnetic and eddy current principles to measure coating thickness on both ferrous and non-ferrous metals, accurately and quickly.

View PosiTector Inspection Kits

Compare DeFelsko® Thickness Gauge Models

  Most popular 90° Regular probe For dublex coating systems For hot & rugged applica-tions For anod-ized alu-minum Microprobes - Smallest probes for small parts or hard-to-reach areas Integral and Cabled probes for thick protective coatings. (Epoxy, rubber, intumescent fireproofing and more)
Ferrous Probes (STD.) F1 FS1 FRS1   FXS1   F0S1 F45S1 F90S1 F90ES1 FT1 FTS1 FTRS1 FHXS1 FKS1 FLS1  
Ferrous Probes (ADV.) F3 FS3 FRS3   FXS3   F0S3 F45S3 F90S3 F90ES3 FT3 FTS3 FTRS3 FHXS3 FKS3 FLS3  
Non-Ferrous Probes (STD.) N1 NS1 NRS1     NAS1 N0S1 N45S1 N90S1           NKS1    
Non-Ferrous Probes (ADV.) N3 NS3 NRS3     NAS1 N0S3 N45S3 N90S1           NKS3    
Combo Probes (STD.) FN1 FNS1 FNRS1 FNDS1               FNTS1         FNGS1
Combo Probes (ADV.) FN3 FNS3 FNRS3 FNDS3               FNTS3         FNGS3
Range 0-60 mils
0-1500 μm		 0-80 mils
0-2000 μm		 Ferrous: 0-40 mils / 0-1150 μm
Non-Ferrous: 0-25 mils / 0-625 μm		 0-250 mils
0-6 mm		 0-400 mils
0-10,000 μm		 0-500 mils
0-13 mm		 0-1.5 in
0-38 mm		 0-2.5 in
0-63.5 mm
Accuracy (0.05 mil + 1%) 0-2 mils
(0.1 mil + 1%) >2 mils

(1 μm + 1%) 0-50 μm
(2 μm + 1%) >50 μm		 (0.02 mil + 1%) 0-4 mils
(0.1 mil + 3%) >4 mils

(0.5 μm + 1%) 0-100 μm
(2 μm + 3%) >100 μm		 (0.4 mil + 1%) 0-100 mils
(0.5 mil + 3%) >100 mils

(0.01 mm + 1%) 0-2.5 mm
(0.01 mm + 3%) >2.5 mm		 (0.1 mil + 3%)
(2 μm + 3%)		 (1 mil + 3%)
(0.02 μm + 3%)		 (0.01 in + 3%)
(0.2 mm + 3%)
Matching DeFelsko
Cal. Std.		 STDS1
STDA1		 STDS4 STDS2
STDA2		 STDP1 STDP7 STDP5 STDP8 STDP8
(included)
X