AEMC Instruments Line Splitters

AEMC Instruments Line Splitters

Line Splitters provide a means to cleanly “open” a line cord in order to make clamp type current measurements. When connected between the wall outlet and the device under test, a clamp meter can then be clamped around one of the two test openings in the splitter. One opening provides a one-to-one current reading and the other provides a times-ten (X10) reading so that small current will display with better resolution on a clamp meter. These devices make reading current easy and safe.
 
Line Splitters Applications

• Splits two conductor line cord to permit amps measurement with Clamp-On
• Allows direct current reading in 1X mode
• Increases sensitivity of current measurement in 10X mode
• Provides easy and safe measurements of current without the need to cut off the plug and separate the conductors

Types of Line Splitters

• 2-way
• 3-way

Key Features of Line Splitters to Consider

• Provides easy and safe measurements of current without the need to cut off the plug and separate the conductors
• Plugging the power connector into the Line Splitter separates the hot/live conductor from the neutral (and ground)
• Some models features voltage check function
• Some models voltmeter output jacks for simultaneous voltage measurement
• Up to 15 Amps continuous current (up to 20 Amps for one minute maximum)
• Plugs directly to an outlet or can be connected with test leads adapter
• Can be connected in series with permanently wired equipment
• Limited Life Time Warranty in some models