Yokogawa 264 Taut Band and Iron Vane Window Mount Stylist

Stylist analog panel meters are available in Window mount or Surface mount styles. Optional bezels for Surface mount permit rear panel mounting. Standard movement torque to weight ratio is approximately 4 times greater than most other manufacturer's high torque versions.
 
Note: Severe-duty panel meters are available to meet/CUL or /UL 1437 requirements in 2 1/2"-4 1/2" sizes. To order, add /UL or /CUL after catalog number.

Surface Mount Pivot & Jewel - Model 264
In this design the coil and pointer are supported by polished steel pivots at each end which fit into jewel bearings. Pivot and jewel meters are recommended for high- vibration environments because of the mechanism’s inherent stability and strength. Accuracy and repeatability are almost equal to the taut-band’s, and good performance from the pivot and jewel construction is the reason for its long popularity. Don’t specify pivot and jewel meters for applications that involve high shock, but do take advantage of this meter’s ability to withstand vibration.

Stylist Surface Mount Pivot & Jewel 264 - DC Ammeter
Stylist Surface Mount Pivot & Jewel 264 - DC Voltmeter
Stylist Surface Mount Pivot & Jewel 264 - Frequency Meter

Accuracy:

All DC and AC iron vane, ±2% of fullscale, AC rectifier type; ±3% of fullscale (60 Hz sine wave). Expanded scale voltmeters ±5% of fullscale. Special order DC with mirror back scale (DC only) 3-1/2 - 4-1/2” Available @ ±1%.

ANSI Specification:

All meters meet ANSI Specifications C-39.1

Overload:

Voltmeters (AC + DC) - 50% momentary, 20% sustained. Ammeters (AC +DC) momentary: 10 times the rated current for 10 consecutive intervals of .5 seconds with 1 minute interval between successive applications; sustained: 20% for six hours.