| YSI TruLab pH/ISE 1320 General Specifications |
| Benchtop |
Yes |
| Buffer Recognition |
Yes |
| Certifications |
electrical protective class III, CE, cETLus, IP43 |
| Display |
Backlit graphic display |
| Equipment used with |
TruLab analog pH/mV/ISE/temp probes |
| GLP Compliance |
Yes |
| Graphic Display |
Backlit graphic display |
| Logging Capabilities |
Yes |
| Measurement Method / Channels |
2 Channel |
| Measurement Range |
Ranges Resolutions Accuracy (+1 digit) pH -2.0 to 20.0; -2.00 to 20.00; -2.000 to 19.999 0.1; 0.01; 0.001 ±0.1; ±0.01; ±0.005 (temp of test sample 15 to 35°C; within a range of ±2 pH of the calibration point) mV -1200 to 1200.0; -2500 to 2500 0.1; 1.0 ±0.3; ±1.0 (temp of test sample 15 to 35°C) ISE (mg/l, mg/kg, mmol/l, ppm, %) (µmol/l) 0.000 to 9.999; 10.00 to 99.99; 100.0 to 999.9; 1000 to 999999 0.000 to 9.999; 10.00 to 99.99; 100.0 to 999.9; 1000 to 9999 0.001; 0.01; 0.1; 1 Temperature -5 to 105°C (23.0 to 221°F) 0.1 ±0.1 |
| Memory |
500 data sets manual logging, 5,000 data sets auto logging |
| Operating pH Range |
-2.0 to 20.0, -2.00 to 20.00, -2.000 to 19.999 |
| Operating Temperature |
23.0 to 221°F, -5 to 105°C |
| Parameters Measured |
pH, ORP (mV), Ammonia, Ammonium, Bromide, Cadmium, Calcium, Chloride, Copper, Cyanide, Fluoride, Iodide, Lead, Nitrate, Potassium, Silver/Sulfide, Sodium, Temperature |
| Power |
approximately 150 hours with illumination or 1000 without, 4 alkaline AA batteries fully charged or included universal power supply |
| Sampling |
Yes |
| Storage Temperature |
-25 to 65°C, -13 to 149°F |
| Unit of Measure |
ISE Measurements: Blank value correction, increment methods: Known addition (single), Known addition (double), Known subtraction, Sample addition, Sample subtraction |
| User Calibratable |
Yes |
| User Replaceable |
Yes |
| Warranty |
3 years |