• Handle size: 26.6 IN/LBS - 3.0NM
• Tools Meet: ASME B107.14m, EN ISO 6789, BS EN 26789
• Weight lb: 0.25 lb
• Guaranteed Torque Accuracy of +/- 10% to 5000 cycles / 1 year
• Each Tool Factory Preset and Calibrated No Certificate of calibration

The Wiha 29230 is EN ISO 6789, BS EN 26789, ASME B107.14M Each Tool Factory Preset and Calibrated No Certificate of calibration Latest Ergonomic SoftFinish multi-component handle enables optimal power transmission Audible and perceptible click when the pre-set torque has been attained Guaranteed Torque Accuracy of ±10% to 5000 cycles / 1 year 50% greater loosening torque Mechanism insensitive to industrial lubricants Automatically resets for next torque cycle

Non-certified tool accuracy with torque accuracy of ±10%. Designed for consistent and accurate torquing at a lower price point. Delivering consistent torquing on a indexable carbide cutter would be an example of where EasyTorque thrives.

Designed for the same application but in a tight-fit environment. Imagine tightening a turret on a machine tool, you can’t take the tool out of the machine, you have to change the cutter. You want each one of these cutters to be seated the same as the next so your chip load is consistent around the whole diameter of the cutter. Wing torque will get in to where you need to go. With the Wing Torque line, they have their own set of blades due to their smaller nature.

Certified handles that guarantee torque accuracy of ± 6% to 5000 cycles. The loosening torque of this handle is 30% greater than when tightening. TorqueFix blades are available in Torx®, Hex, Metric, and Inch as well as 1/4″ bit adapters.

The most intelligent of the Torque Control Tools we offer is the iTorque. Completing jobs with multiple different torque values at a high accuracy point is where the iTorque shines. It is certified to ±6% and is available with the torque ranges of 60-210 in/oz, 7-26 in/oz, and 9-45in/lbs. It has a digital display screen the shows the current torque setting in Nm and in.lbs as well as cycle count. To adjust the amount of torque, pressing the end button and turning the ribbed dial will change the torque to be output. The iTorque also comes with an adjustment tool for higher torque ranges where adjustment may become difficult.