• Max Torque: 4.4 in/lbs - 0.5nm
• Tools meet: ASME B107.14M, EN ISO 6789, BS EN 26789
• Guaranteed torque accuracy of +/- 10% to 5000 cycles / 1 year
• Each tool factory preset and calibrated no certificate of calibration
• New SoftFinish cushioned grips with larger handles for better torque

The Wiha has EN ISO 6789, BS EN 26789, and ASME B107.14M Each Tool Factory Preset and Calibrated No Certificate of calibration Latest Ergonomic SoftFinish multi-component handle enables optimal power transmission Audible and perceptible click when the pre-set torque has been attained Guaranteed Torque Accuracy of ±10% to 5000 cycles / 1 year 50% greater loosening torque Mechanism insensitive to industrial lubricants Automatically resets for next torque cycle.

Non-certified tool accuracy with torque accuracy of ±10%. Designed for consistent and accurate torquing at a lower price point. Delivering consistent torquing on an indexable carbide cutter would be an example of where EasyTorque thrives.

Designed for the same application but in a tight-fit environment. Imagine tightening a turret on a machine tool, you can’t take the tool out of the machine, you have to change the cutter. You want each one of these cutters to be seated the same as the next so your chip load is consistent around the whole diameter of the cutter. Wing torque will get into where you need to go. The Wing Torque line, they have its own set of blades due to its smaller nature.

Certified handles that guarantee torque accuracy of ± 6% to 5000 cycles. The loosening torque of this handle is 30% greater than when tightening. TorqueFix blades are available in Torx®, Hex, Metric, and Inch as well as 1/4″ bit adapters.

T-Handle

For jobs that need varying heavy-duty torque, we have T-handles with variable torque for greater leverage and mechanical advantage. In variable torque, the T-Handles are available from 5Nm-14Nm and are certified for ±6% Accuracy.

TorqueVario

Available in varying ranges allows you to complete many tasks with one handy tool. TorqueVario handles come with a separate adjustment tool. To adjust the amount of torque that the handles output, their adjustment tool fits into where the blade or adapters live. By turning the tool, the amount of torque that will be output changes in the indicator window. Utilize our handy online converter to help determine how much torque is needed.

ESD Torque

For small and delicate projects requiring minimal torquing power, our ESD Torque Control Tools come in 15-80in/oz, 5-10In/lbs., and 5-18 In/lbs. The electrostatic dissipative torque tools have their own set of blades and adapters.

Insulated Torque

Insulated Torque Control Tools have their own special 6mm Hex composite SlimLine insulated blades. Because they are an insulated tool, you have to insulate the blades as well as the handle. The Insulated SlimLine Torque Control Handle won’t accept non-insulated blades to protect the user. Our insulated tools are individually tested at 10,000 volts and are rated for 1,000 volts.

The most intelligent of the Torque Control Tools we offer is the iTorque. Completing jobs with multiple different torque values at a high accuracy point is where the iTorque shines. It is certified to ±6% and is available with torque ranges of 60-210 in/oz, 7-26 in/oz, and 9-45in/lbs. It has a digital display screen that shows the current torque setting in Nm and in. lbs as well as cycle count. To adjust the amount of torque, pressing the end button and turning the ribbed dial will change the torque to be output. The iTorque also comes with an adjustment tool for higher torque ranges where adjustment may become difficult.