ELASTOSIL A 2000 is a one-component, thixotropic sealant intended for gasketing and sealing applications where resistance to long-life lubricants (such as hypoid gear lubricant) under harsh conditions is required.

Specific features of ELASTOSIL® A 2000

• 1-component system
• Condensation-curing
• Fast curing at room temperature
• Flexible at low (-40 °C) and high temperatures (+150 °C)
• Media resistant
• Non-slump
• One-component
• Thixotropic

Application details

Surfaces to be bonded must be clean, dry and free of oils and grease. ELASTOSIL® A 2000 can be bulk dispensed with conventional drum and pail extruder pumps to feed gasket tracing machines for precise bead placement and material efficiency. Manual applications for repair, short runs or low-volume applications may be accomplished with a pail extruder equipped with a high-pressure flexible fluid hose and extrusion gun. Recommended equipment suppliers for transfer systems and dispensing machines will be supplied upon request. For most gasket applications, a sealant bead of 3 to 4 mm width is sufficient. Assemble parts immediately so that the sealant is spread.