• VTF digital thermoregulatory with Fuzzy Logic Technology
• Temperature range: -10°C to 300°C (14°F to 572°F)
• Accuracy: ± 0.5 °C (± 0.9 °F)
• Equipped with a unique and innovative clamp system
• Integrated digital timer (maximum working time of 24 hours and 59 minutes)

The Velp Scientifica F208B0063 VTF is thermoregulatory with fuzzy logic technology. It has a temperature range of -10°C to 300°C (14°F to 572°F). The F208B0063 has an integrated digital timer with a maximum working time of 24 hours and 59 minutes. The VTF thermoregulatory is ideal for many applications and meets the most demanding requirements in terms of precision, reliability, and flexibility. It automatically adjusts the thermoregulation to different factors such as power, load, and thermal dispersion.

The VTF ensures premium performance in terms of temperature control: it allows better alignment with the set point temperature (with an accuracy of ± 0.5 ° C) and lowers initial "overshoot" (initial discrepancy with the set temperature).

The VTF is equipped with a unique and innovative integrated system to simplify installation on the support rod and facilitate the positioning of the Pt100 probe in the most commonly used containers. The two clamps allow height regulation while a sliding clamp allows horizontal regulation.

With the integrated digital timer, it is possible to select an operating time of up to 24 hours and 59 minutes. The instrument will automatically shut off the thermoregulation. Timer mode can be easily recognized by the flashing of the two arrows on the left-hand side of the display.

Connecting the VTF

Note: If the Thermoregulatory is connected to an instrument different than the VELP Scientifica AREX, AREX DIGITAL PRO, AREC.X or PW10, please check the compatibility of the DIN 5 pole connector as illustrated in the wiring diagram. The wiring diagram can also be found in the instruction manual. 

1.Pt100 probe

2. Electronic board

3. Plug DIN 5 poles