Model: HMT360 Transmitter Specifications |
Description |
Intrinsically Safe Humidity and Temperature Transmitter |
Measurement Performance |
Relative Humidity |
Measurement range |
0 ... 100 %RH |
Accuracy (Including Non-linearity, Hysteresis, and Repeatability) |
With Vaisala HUMICAP 180R |
For typical applications |
At +15 ... +25 °C (59 ... +77 °F) |
± 1.0 %RH (0 ... 90 %RH) ±1.7 %RH (90 ... 100 %RH) |
At -20 ... +40 °C (-4 ... +104 °F) |
±(1.0 + 0.008 x reading) %RH |
At -40 ... +180 °C (-40 ... +356 °F) |
± (1.5 +0.015 x reading) %RH |
Factory calibration uncertainty (+20 °C) (Defined as ±2 standard deviation limits. Small variations possible, see also calibration certificate.) |
± 0.6 %RH (0 ... 40 %RH) | ± 1.0 %RH (40 ... 97 %RH) |
Response Time (90 %) at +20 °C (+68 °F) in Still Air |
With grid filter |
17 s |
With grid + steel netting filter |
50 s |
With sintered filter |
60 s |
Temperature |
Measurement range |
-70 ... +180 °C (-94 ... +356 °F) (depends on selected probe) |
Typical accuracy of electronics at +20 °C (+68 °F) |
±0.2 °C (0.36 °F) |
Typical temperature dependence of electronics |
0.005 °C/°C (0.005 °F/°F) |
Sensor |
Pt1000 RTD Class F0.1 IEC 60751 |
Other Variables |
Optionally available |
Dew point temperature, mixing ratio, absolute humidity, wet bulb temperature |
Operating Environment |
Operating temperature for electronics |
-40 … +60 °C (-40 … +140 °F) |
Operating temperature with display |
-20 … +60 °C (-4 … +140 °F) |
Storage temperature |
-40 … +70 °C (-40 … +158 °F) |
Pressure range |
See probe specifications |
EMC compliance |
1 |
Inputs and Outputs |
Operating voltage With serial port (service mode) |
12 … 28 V | 15 … 28 V |
Analog outputs |
Two-wire 4 … 20 mA, one standard, one optional Connection via safety barriers |
Typical accuracy of analog outputs at +20 °C |
±0.05 % full scale |
Typical temperature dependence of analog outputs |
0.005 % / °C (0.005 % / °F) full scale |
RS-232C serial output for service use (requires cable accessory 25905ZZ) |
Connector type RJ45 |
Display |
Two-line LCD |
Mechanical Specifications |
Connections |
Screw terminals, 0.33 … 2.0 mm2 |
wires (AWG 14-22) |
Cable bushings |
For 7.5 … 12 mm or 10 … 15 mm cable diameters (M20) |
Conduit fitting |
NPT 1/2" |
Housing material |
G-AlSi10Mg (DIN 1725) |
Housing weight |
950 g (2.1 lb) |
Compliance |
IP rating |
IP66 (NEMA4X) |
Classification with Current Outputs |
Europe / VTT |
EU (94/9/EC, ATEX100a) |
II 1 G Ex ia IIC T4 Ga
Certificate No. VTT 09 ATEX 028 X |
Safety factors |
Ui = 28 V, Ii = 100 mA, Pi = 700 mW Ci = 1 nF, Li negligibly low |
Environmental specifications |
Tamb |
-40 … +60 °C (-40 … +140 °F) |
Pamb |
0.8 … 1.1 bar |
Dust classification (with protection cover 214101) |
II 1 D (IP65 T=+80 °C (+176 °F)) VTT 04 ATEX 023X |
USA (FM) |
Classes I, II, III, Division 1, Groups A-G and Division 2, Groups A-D, F and G FM Project ID: 3010615 |
Safety factors |
Vmax = 28 VDC, Imax = 100 mA,
Ci = 1 nF, Li = 0, Pi = 0.7 W,
Tamb = +60 °C (+140 °F), T5 |
Japan (TIIS) |
Ex ia IIC T4
Code number: TC20238 |
Safety factors |
Ui = 28 VDC, Ii = 100 mA, Ci = 1 nF,
Pi = 0.7 W, Li = 0, Tamb = +60 °C (+140 °F)
|
Canada (CSA) |
Class I |
Division 1 and Division 2, Groups A, B, C, D |
Class II |
Division 1 and Division 2, Groups G and Coal Dust |
Class III |
CSA File No: 213862 0 000, CSA Report: 1300863 |
Safety factors |
Tamb= +60 °C (+140 °F), T4
Intrinsically safe when connected as per Installation Drawing DRW213478. |
China (PCEC) |
Ex ia II CT4
Certificate No. CE092145
Standard GB3836.1-2000 and
GB3836.4-2000 |
IECEx (VTT) |
Ex ia IIC T4 Ga
Certificate No. IECEx VTT 09.0002x |
Safety factors |
Ui = 28 V, Ii = 100 mA, Pi = 700 mW Ci = 1 nF, Li negligibly low |
Environmental specifications |
Tamb |
-40 … +60 °C (-40 … +140 °F) |
Pamb |
0.8 … 1.1 bar |
Dust classification (with protection cover 214101) |
Ex ta IIIC T500 80 °C Da IECEx VTT 12.0016X |
EAC (Russia, Kazakhstan, Belarus) (TRCU) |
0Ex ia IIC T4 Ga X Certificate No. RU C-FI.MШ06.B. 00068 |
Environmental specifications |
Tamb |
-40 … +60 °C (-40 … +140 °F) |
Pamb |
0.8 … 1.1 bar |
Korea (KOSHA) |
Ex ia IIC T4 Certificate No. 17-AV4BO-0419X |
Safety factors |
Ui = 28 V, Ii = 100 mA, Pi = 700 mW Ci = 1 nF, Li = negligibly low |
Environmental specifications |
Tamb |
-40 … +60 °C (-40 … +140 °F) |
Pamb |
0.8 … 1.1 bar |