Applicable Fibers |
MMF (ITU-T G.651), SMF (ITU-T G.652), DSF (ITU-T G.653), NZDSF (ITU-T G.655), BIF (ITU-T G.657), EDF |
Fiber Cleaved Length |
10 mm |
Cladding Diameter |
80-150 μm |
Coating Diameter |
100-1000 μm |
Fiber Count |
Single |
Fiber Aligning Method |
Active Clad Alignment |
Return Loss |
≥60 dB |
Actual Average Splice Loss |
0.02 dB (SM), 0.01 dB (MM), 0.04 dB (DS), 0.04 dB (NZDS, LEAF, and BIF)* |
Splicing Mode |
60 preset/user-definable modes |
Splicing Time |
<9 seconds in standard SM, 12 seconds in AUTO modes |
Arc Calibration Mode |
Automatic and Manual |
Boot Time |
5 seconds |
Protection Sleeve Length |
60 mm, 40 mm, and micro sleeves |
Storage of Splice Results |
5000 results |
Tension Test |
2 N |
Fiber Display Magnification |
200X |
Tube Heating Mode |
20 preset and user definable modes; adjustable 0–240 seconds |
Attenuator Mode |
0.1 to 15 dB |
Electrode Life |
5000 splices |
Splices per Battery Charge |
240 |
Tube Heating Time |
28 seconds typical (24s to 36s) |
Splicing/Heating Times |
150 cycles (splice/tube heat) typical |
Display |
3.5 inch color turn-over LCD |
Connectivity |
USB 2.0 |
Ingress Protection |
IP5X (Dust); IPX2 (Water) |
Operating Condition |
0-5000 m (0-16,400 ft) above sea level; 0 to 95% RH; -25 to 50 °C (-13 to 122 °F): Maximum wind velocity of 15 m/s |
Storage Condition |
-30 to 70 °C (-22 to 158 °F); 0 to 95% RH |
Power Supply |
North America AC adapter (100-240 VAC); Li battery (4400 mAh) |
Weight |
1.5 kg (3.3 lb) including battery
1.2 kg (2.6 lb) without battery |
Dimensions (HxWxT) |
125 x 125 x 135 mm (4.9 x 4.9 x 5.3 in) |
Splice-on Connector |
SC, LC, FC, and ST |