Tektronix DPO4ENET - Application Module: Ethernet Serial Triggering and Analysis (10BASE-T 100BASE-TX)

Name: Tektronix DPO4ENET - Application Module: Ethernet Serial Triggering and Analysis (10BASE-T 100BASE-TX)
Brand: Tektronix
SKU: TektronixDPO4ENET
Price: 1887.11 USD
Availability: InStock

0 reviews | Model: Tektronix DPO4ENET

Compare

Application Module: Ethernet Serial Triggering and Analysis (10BASE-T 100BASE-TX)

Automated trigger, decode, and search for 10BASE-T and 100BASE-TX Ethernet standards
Designed for use with MDO4000 Series Oscilloscopes

View Product Details

List Price: $1,930.00

In Stock:

View Payment Options

Recommended for you

DPO4ENET Ethernet Triggering and Analysis Test Characteristics
Instrument Compatibility
Model	Description
10BASE-T and 100BASE-TX	≥350 MHz models of MSO/DPO4000B and MDO4000 Series
10BASE-T	All models of MSO/DPO4000B and MDO4000 Series
Bus Setup Options
Option	Description
Ethernet Compatibility	10BASE-T, 100BASE-TX
Sources	Single-ended:Analog channels 1-4 Differential:Analog channels 1-4 Math channel Reference channels 1-4
Recommended Probing	10BASE-T: Single-ended or differential 100BASE-TX: Differential
Thresholds Presets	10BASE-T: Single-ended (D+ 1.25 V; D- 1.25 V); Differential (High 1.25 V; Low -1.25 V) 100BASE-TX: Single-ended (D+ 500 mV; D- 500 mV); Differential (High 500 mV; Low -500 mV)
Address/Data Formats Available	Hex Binary Hex or ASCII: Data Decimal and Hex: Other Fields
Bus Decode
Characteristic	Description
Ethernet Data Rates	10BASE-T: 10 Mb/s 100BASE-TX: 100 Mb/s
Decode Display	Start (green bar) MAC Address (yellow packet) Data (cyan packet) IPv4 Header (white packet) TCP Header (brown packet) CRC (purple packet) Stop (red bar) Error (red packet)
Internet Protocol Support	IPv4
Transport Layer Protcol Support	TCP
Display Modes
Mode	Description
Bus	Bus only
Bus and Waveforms	Simultaneous display of bus and digital waveforms
Event Table	Decoded packet data in a tabular view
Bus Trigger Options
Option	Description
Trigger and/or Search On	10BASE-T: Start Frame Delimiter MAC Addresses: Trigger on Source and Destination 48-bit address values MAC Q-tag Control Information: Trigger on Q-tag 32-bit value MAC Length/Type: Trigger on ≤, <, =, >, ≥, ≠ a particular 16-bit value, or inside or outside of a range MAC Client Data: Trigger on ≤, <, =, >, ≥, ≠ a particular 16-bit value, or inside or outside of a range. Selectable number of bytes to trigger on from 1-16. Byte offset options of Don't Care, 0-1499 IP Header: Trigger on IP header 8-bit value, Source Address, Destination Address TCP Header: Trigger on Destination Port, Source Port, Sequence Number, and Ack Number TCP/IPv4 Client Data: Trigger on ≤, <, =, >, ≥, ≠ a particular data value, or inside or outside of a range. Selectable number of bytes to trigger on from 1-16. Byte offset options of Don't Care, 0-1499 End of Packet FCS (CRC) Error 100BASE-TX: Start Frame Delimiter MAC Addresses: Trigger on Source and Destination 48-bit address values MAC Q-tag Control Information: Trigger on Q-tag 32-bit value MAC Length/Type: Trigger on ≤, <, =, >, ≥, ≠ a particular 16-bit value, or inside or outside of a range MAC Client Data: Trigger on ≤, <, =, >, ≥, ≠ a particular data value, or inside or outside of a range. Selectable number of bytes to trigger on from 1-16. Byte offset options of Don't Care, 0-1499 IP Header: Trigger on IP header 8-bit value, Source Address, Destination Address TCP Header: Trigger on Destination Port, Source Port, Sequence Number, and Ack Number TCP/IPv4 Client Data: Trigger on ≤, <, =, >, ≥, ≠ a particular data value, or inside or outside of a range. Selectable number of bytes to trigger on from 1-16. Byte offset options of Don't Care, 0-1499 End of Packet FCS (CRC) Error Idle