Instrument to Local Area Network (LAN) Connectivity
Control your Tektronix TDS Series oscilloscope from any networked PC. Check on its status or capture waveforms any time you want from your office, another site, or from anywhere using WaveStar application software or your own software. Or command your TDS Series oscilloscope to print to a networked printer.
The Tektronix GPIB-LAN adapter takes advantage of the fact that many of today's computers are connected together through an Ethernet 10Base-T LAN.
Print to Networked Printers
Using any web browser, select the networked printer to which your TDS Series oscilloscope will print and route your hardcopy output to your high quality monochrome or color networked printer.
Microsoft Windows 95/98/2000 or NT 4.0 Compatibility
You do not need to understand or program Ethernet protocols. Both communications and Virtual Instrument Software Architecture (VISA) software for Microsoft Windows 95/98/2000 or NT 4.0 are included free with the GPIB-LAN adapter. Now, you can also perform waveform capture from your TDS Series oscilloscopes across the LAN by using Tektronix WaveStar™ for oscilloscopes application software. Or write a program using C, C++, or Microsoft Visual Basic to capture data or control your instrument. As long as the program is written using the standard VISA interface, the GPIB-LAN adapter's software will turn your PC into a GPIB talker, listener, controller.
Network Details
The AD007 implements a full range of adapter functions and Ethernet-based TCP/IP protocols. It operates with all of the popular network protocols such as BOOTP, DHCP, DNS, LPD, HTTP and FTP.
Configuration and Statistics
Use a web browser to configure features; examine GPIB commands, Ethernet traffic statistics, and GPIB traffic statistics; and initiate diagnostic GPIB commands.
Ease of Installation
Simply connect your AD007 to your LAN with the cable provided, connect the GPIB interface to your instruments and power up the unit. It automatically requests an IP address from the network's boot server or this can be manually entered using the adapter's internal web page. Upon power-up, the unit also performs hardware diagnostics/self-test. Status indicators on the unit give evidence of successful completion of this testing, connection to the LAN and both LAN and GPIB traffic.
Any number of AD007 Adapters may be used to connect any combination of GPIB devices to the network. (NOTE: Limit of 14 devices per GPIB cluster.)