| SDI IN input |
| Inputs |
SDI, auto-detection of 3G, Dual Link, HD, SD, and ASI signals
(Option 3G required for 3G formats) |
| Input type |
BNC, internally terminated 75 Ω |
| Input level |
800 mVp-p, ±10% |
| Input equalization |
| 270 Mb/s |
Up to 315 m of type 1694A cable |
| 1.5 Gb/s |
Up to 170 m of type 1694A cable |
| 3 Gb/s |
Up to 115 m of type 1694A cable |
| Return loss |
>15 dB from 1 MHz to 1.5 GHz, power on or off
>10 dB from 1.5 GHz to 3 GHz, power on or off |
| MULTI IN input |
| Inputs |
SDI, auto-detection of 3G, Dual Link, HD, SD, and ASI signals, AES/EBU, Linear Time Code
(Option 3G required for 3G formats) |
| Input type |
BNC, Auto termination (SDI, AES/EBU: 75 Ω, LTC: >1 kΩ) |
| SDI input level |
800 mVp-p, ±10% |
| SDI input equalization |
| 270 Mb/s |
Up to 315 m of type 1694A cable |
| 1.5 Gb/s |
Up to 170 m of type 1694A cable |
| 3 Gb/s |
Up to 115 m of type 1694A cable |
| AES/EBU input |
48 kS/s, AES 3-ID, ANSI/SMPTE 276M |
| AES/EBU input |
level 0.5 Vp-p to 2 Vp-p |
| LTC input |
Linear Time Code per SMPTE 12M-1 |
| LTC input |
level 0.2 Vp-p to 5 Vp-p |
| Return loss |
>15 dB from 1 MHz to 1.5 GHz, power on or off
>10 dB from 1.5 GHz to 3 GHz, power on or off |
| STRESS LOOP loop through |
| Input type |
2 × BNC passive loop through, 75 Ω transmission |
| Simulated |
cable 20 m, Belden 1694A |
| SDI OUT output |
| Output |
SDI Switched Output. Selectable, active input, or test signal |
| AES OUT output |
| Output |
48 kS/s, AES 3-ID, ANSI/SMPTE 276M |
| Output type |
BNC, 75 Ω |
| Output level |
0.9 Vp-p to 1.1 Vp-p into 75 Ω |
| External reference |
| Sync formats |
NTSC, PAL, and tri-level sync |
| Input type |
BNC, 75 Ω internally terminated |
| Return loss |
>40 dB to 6 MHz
>35 dB to 30 MHz |
| Lock range |
±50 ppm |
| Serial digital waveform vertical characteristics |
| Vertical measurement accuracy |
| 1x gain |
±0.5% of 700 mV full scale |
| 5x gain |
±0.2% of 700 mV full scale |
| Gain |
1x, 5x, variable range 0.25x to >7.5x |
| Frequency response |
| SD |
Luminance (Y) channel ±0.5% to 5.75 MHz
Color Difference channels (Pb, Pr) ±0.5% to 2.75 MHz |
| HD |
Luminance (Y) channel ±0.5% to 30 MHz
Difference channels (Pb, Pr) ±0.5% to 15 MHz |
| 3G |
Luminance (Y) channel ±0.5% to 60 MHz
Difference channels (Pb, Pr) ±0.5% to 30 MHz |
| Waveform horizontal characteristics |
| Sweep timing accuracy |
±0.5% |
| Sweep linearity |
±0.2% |
| Audio characteristics |
| Level meter resolution |
0.056 dB steps at 30 dB scale from full scale to –20 dBFS
0.20 dB steps at 70 dB scale for signals above –20 |
| Meter ballistics |
True peak, PPM type 1, PPM type 2, BBC PPM |
| Defined/programmable level detection |
Mute, clip, user-programmable silence, over |
| Level meter accuracy |
±0.1 dB from 20 Hz to 20 kHz, 0 to –40 dBFS sine wave, Peak Ballistic mode |
| SDI generator characteristics |
| Test signals |
100%/75%/SMPTE (EG1, EG432-1, RP219) Color Bars, 0%/50%/100% Flat field, 5/10 Step Staircase, Multiburst, Y Multiburst, Checkerboard, Clean Aperture, Convergence, Pluge and Luma Reference, Production Aperture, SMPTE 303M Color Reference, ChromaDuMonde, Pathological signal |
| Output format |
525i 59.94 Hz |
| Reference input signal |
NTSC/PAL black burst
HDTV tri-level sync (720p, 1080i) |
| Lock range |
±30 ppm |
| Genlock time adjustment |
| Vertical offset range |
± half of the frame length where the frame length is the shorter frame of the generated video or reference signal |
| Horizontal offset range |
±32 μs
Resolution: 37 ns
Accuracy: 100 ns of the setting |
| Audio generator characteristics |
| Output |
AES OUT, SDI OUT (embedded audio) |
| AES OUT |
Test signal, AES loopout, de-embedded audio |
| Test tone |
| Frequency |
100 Hz, 200 Hz, 400 Hz, 800 Hz, 1 kHz, 2 kHz, 4 kHz, 10 kHz, 18 kHz |
| Level |
-60 to 0 dBFS |
| Bit depth |
20 / 24 bit |
| Dolby E stream playout |
Option DBE required |
| Modes |
8x1, 7.1, 5.1+2, 5.1, 4x2 |
| Levels |
-20 dBFS, -18 dBFS, Multi-tone |
| Features |
Start position selection, selected metadata editing |
| Power adapter |
| Input voltage |
Accepts 100 to 240 V AC ±10% 50/60 Hz |
| Output voltage |
19 V DC nominal |
| Input voltage |
| Voltage range |
19 V DC nominal
10.75 to 20 V DC min-max operating |
| Supply connection |
2.5/5.5 mm DIN |
| Power consumption |
24 W typical
35 W max |
| Surge |
20 A at 12 V |
| Fuse rating |
4 A, internal self-resetting fuse |
| Transient, over, and reverse voltage |
Reverse- and over-voltage protected to ±30 V DC
The unit may power itself down in the presence of high transient voltages. This prevents damage to the unit and is not a fault |
| Physical characteristics |
| Dimensions (Including boot, excluding projections) |
| Height |
8.5 in. (216 mm) |
| Width |
8.2 in. (208 mm) |
| Depth |
1.4 in. (36 mm) |
| Weight (Including boot, excluding projections) |
| Net |
(with battery): 4 lb. (1.8 kg) |
| Net |
(without battery): 3 lb. (1.4 kg) |
| Environmental |
| Temperature |
Operating 0 °C to +40 °C
Nonoperating –20 °C to +60 °C |
| Humidity |
Operating 20% to 80% relative humidity at up to +40 °C, noncondensing
Nonoperating 5% to 90% relative humidity at up to +60 °C, noncondensing |
| Altitude |
Operating: Up to 10,000 ft. (3,000 m)
Nonoperating: Up to 40,000 ft. (12,000 m) |