Tektronix RMD2000-b RackMount Kit

Name: Tektronix RMD2000-b RackMount Kit
Brand: Tektronix
SKU: TektronixRMD2000-b
Price: 528.00 USD
Availability: InStock

0 reviews | Model: Tektronix RMD2000-b

Compare

Rackmount Kit, Open box b-stock. Customer return. Customer order wrong rack, they built it and disassembled it then returned it. All parts are present

Rackmount Kit, Open box b-stock
For Specific Use With DPO2000B Series (Formerly DPO2000)
MSO2000B Series (Formerly MSO2000) Oscilloscopes

View Product Details

List Price: $540.00

In Stock:

View Payment Options

Recommended for you

Tektronix RMD2000-b RackMount Kit

This introduction describes the rackmount kit for your standard bench-top instrument. The rackmount kit is a collection of parts that, once installed, configure the instrument for mounting into a standard 19-inch equipment rack.

Install

Install the left and right side brackets onto the bottom bracket using three of the 6-32 x 0.312 inch pan head Pozidriv screws on each side. Tighten these screws to 8 in-lb.

Place the oscilloscope into the rackmount frame as shown. Position the oscilloscope’s rear feet in the brackets. The front of the oscilloscope will extend slightly beyond the front of the rackmount frame.

If your application requires that the digital probe be routed to the interior of the rack, place the probe cable(s) in the slot provided before positioning the oscilloscope.

Place the oscilloscope handle in the straight-back position and install the top bracket, aligning the cutouts in the bracket as shown. You will have to pull the bottom of the bracket out a little, to clear the rear panel connectors, as you slide the bracket into position. Use two of the 6-32 x 0.312 inch pan head Pozidriv screws to attach the top bracket to the oscilloscope.Tighten these screws to 8 in-lb.

If your application requires that the digital probe be routed to the interior of the rack, place the probe cable(s) in the slot provided before positioning the oscilloscope.

Align the guides in the front panel bracket and the sides, as shown, and then swing the bottom of the front panel bracket into position.

NOTE: Rack slides are not included as part of this rackmount kit they must beordered separately.

1) 071-2332-00 Instruction Manual
(1) 407-5315-xx Bottom Bracket
(1) 426-2632-xx Front Bracket Faceplate
(1) 407-5318-xx Left Side Bracket
(1) 407-5317-xx Right Side Bracket
(1) 407-5316-xx Top Bracket
(1) 016-2006-xx Hardware Kit - Includes:
- (2) 367-0450-xx Bow Carrying Handle, 3.75 CTR, 8-32 THD 1.75 H, TG2000,
  Safety Controlled
- (4) 210-0833-xx Recessed Washer; 0.42 ID X 0.112 THK, STL NI Plated, 0.588 OD
- (4) 210-1061-xx Flat Washer; 0.203 ID X 0.625 OD X 0.062, 410 SS, Passivate
- (4) 210-1546-xx Machine Screw, PAN, 8-32 X 1/2 PHIL, SST
- (4) 210-1547-xx Lockwasher, #8, SPLIT, .040 THICK
- (4) 210-1548-xx Flat Washer, 12 mm OD X 6.4 mm ID X 1.6 mm THK, Stainless Steel
- (14) 211-0507-xx Machine Screw; 6-32 X 0.312, PNH, 410 SS Passivated, POZ
- (4) 211-0538-xx Machine Screw; 6-32 X 0.312, FLH, 100 DEG, 410 SS Passivated, POZ
- (4) 211-1218-xx M6 X 16MM PHIL OVAL HEAD, 410 SS, Passivate
- (4) 211-1219-xx M5 Screw X 16MM PHIL OVAL, 410 SS, Passivate
- (4) 212-0043-xx Machine Screw; 8-32 X 0.5, FLH, 100 DEG, 410 SS, POZ
- (4) 212-0591-xx Machine Screw; 10-32 X 0.75, OVH, POZ, STL, NI
- (4) 213-0199-xx Machine Screw; 12-24 X 0.75, OVH, STL NP, POZ