| Current accuracy |
| Accuracy Arms |
(45 Hz to 850 Hz)
1 A shunt - ±0.04% reading ±0.04% range
30 A shunt - ±0.04% reading ±0.04% range
External shunt - ±0.1% reading ±0.04% range |
| Accuracy Arms, typical |
(10 Hz to 45 Hz, 850 Hz to 1 MHz)
1 A shunt - ±(0.05 + 2×10-5 × f)% reading ±0.05% range ±40 μA
30 A shunt - ±(0.05 + 2×10-5 × f)% reading ±0.05% range ±4 mA
External shunt - ±(0.1 + 2×10-5 × f)% reading ±0.05% range ±1.1 mV |
| Accuracy Adc |
1 A shunt - ±0.05% reading ±0.1% range ±100 μA
30 A shunt - ±0.05% reading ±0.1% range ± 10mA
External A shunt - ±0.1% reading ±0.1% range ±1.1 mV |
| Ranges |
(peak)
1 A shunt - 12.5 mA, 25 mA, 50 mA, 125 mA, 250 mA, 500 mA, 1.25 A, 2.5 A, 5 A
30 A shunt - 500 mA, 1 A, 2 A, 5 A, 10 A, 20 A, 50 A, 100 A, 200 A
External A shunt - 50 mV, 100 mV, 200 mV, 500 mV, 1 V, 2 V, 5 V, 10 V, 20 V |
| Voltage accuracy |
| Accuracy Vrms (45 Hz to 850 Hz) |
±0.04% reading ±0.04% range |
| Accuracy Vrms (10 Hz to 45 Hz, 850 Hz to 1 MHz), typical |
±(0.05 + 1×10-5 × f)% reading ±0.05% range ±20 mV |
| Accuracy Vdc |
±0.05% reading ±0.1% Range ±50 mV |
| Ranges (peak) |
5 V, 10 V, 20 V, 50 V, 100 V, 200 V, 500 V, 1000 V, 2000 V |
| Supplemental characteristics |
| Hours accuracy |
±0.0125% |
| Watts accuracy (45 Hz to 850 Hz) |
±(Vrmsacc × Arms) ±(Armsacc × Vrms) |
| Watt hour accuracy |
±(Wattacc + Houracc) |
| VA accuracy (45 Hz to 850 Hz) |
±(Vrmsacc × Arms) ±(Armsacc × Vrms) |
| PF accuracy |
Wacc / VA |
| Frequency accuracy |
0.1 Hz to 10 Hz
0.1% of reading
10 Hz to 1 MHz
0.5% of reading |
| Analog inputs |
Ranges
10 Vdc range: ±1 V to ±10 V
Vdcrange: ±0.1 V to ±1 V
Accuracy
±0.2% of reading ±0.2% of range ±0.005 V
Sample rate 1000 samples per second |
| Communications |
| IEEE-488 (Option) |
IEEE Std 488.1 compliant |
| RS-232 |
Baud rates from 9600 bps, 19200 bps (default), and 38400 bps
8 bit, No parity, 1 stop bit, hardware flow control
9 pin male D-type connector |
| Ethernet |
IEEE 802.3 compatible, 10Base-T
RJ-45 connector with Link and Activity indicators
TCP/IP connection on port 5025 |
| USB device |
USB 2.0 compatible, Full speed (12 Mb/sec) |
| General specifications |
| EMC |
Conforms to European Union EMC directive |
| Safety |
Conforms to European Union Low Voltage directive |
| Temperature |
Operating 0 °C to 40 °C (32 °F to 104 °F), 70% relative humidity up to 31 °C (87.8 °F)
Storage -25 °C to 65 °C (-13 °F to 149 °F) |
| Altitude |
Up to 2000 m (6562 ft) above sea level |
| Warm up time |
One hour |
| Calibration period |
One year |
| Power supply |
100 V to 240 VAC, 50 Hz or 60 Hz, 120 VA maximum |
| Transducer power supply |
±15 V, Maximum current 250 mA per analog card |
| Dielectric strength |
Mains supply inlet (Live + Neutral to earth): 1.5 kVAC
Voltage measurement inputs : 2 kVpkto earth
Current measurement inputs : 2 kVpkto earth |
| Dimensions |
With handle and feet - 14.6 cm high × 45 cm wide × 33.5 cm deep (5.75 in × 17.75 in × 13.2 in)
Without handle and feet - 13.2 cm high × 42 cm wide × 33.5 cm deep (5.2 in × 16.5 in × 13.2 in) |
| Weight |
9.5 kg (20.9 lb) – 4 channel instrument with GPIB option installed |
| Warranty |
Three years |